Iowa Crime Rate Comparisons Report, Iowa Department of Public Safety,1999

This report describes how Iowa compares to other states in the nation. To promote consistency, the Iowa totals and the other states’ information have been taken entirely from the FBI’s national publication called Crime in the United States; 1999. The Iowa information in Crime in the United States; 1999 is based upon actual summary totals for selected reporting jurisdictions and produced by the U.S. Department of Justice, F.B.I. These Iowa totals cannot be compared to the 1999 Incident-Based Iowa Uniform Crime Reports, which are based on actual totals for all reporting Iowa law enforcement jurisdictions.

Iowa Crime Rate Comparisons Report, 2000

This report describes how Iowa compares to other states in the nation. To promote consistency, the Iowa totals and the other states’ information have been taken entirely from the FBI’s national publication called Crime in the United States; 2000. The Iowa information in Crime in the United States; 2000 is based upon actual summary totals for selected reporting jurisdictions and produced by the U.S. Department of Justice, F.B.I. These Iowa totals cannot be compared to the 2000 Incident-Based Iowa Uniform Crime reports, which are based on actual totals for all reporting Iowa law enforcement jurisdictions.

Iowa Crime Rate Comparisons Report, Iowa Department of Public Safety, 2001

This report describes how Iowa compares to other states in the nation. To promote consistency, the Iowa totals and the other states’ information have been taken entirely from the FBI’s national publication called Crime in the United States; 2001. The Iowa information in Crime in the United States; 2001 is based upon actual summary totals for selected reporting jurisdictions and produced by the U.S. Department of Justice, F.B.I. These Iowa totals cannot be compared to the 2001 Incident-Based Iowa Uniform Crime Reports, which are based on actual totals for all reporting Iowa law enforcement jurisdictions.

Iowa Crime Rate Comparisons Report, Iowa Department of Public Safety,1998

This report describes how Iowa compares to other states in the nation. To promote consistency, the Iowa totals and the other states’ information have been taken entirely from the FBI’s national publication called Crime in the United States; 1998. The Iowa information in Crime in the United States; 1998 is based upon actual summary totals for selected reporting jurisdictions and produced by the U.S. Department of Justice, F.B.I. These Iowa totals cannot be compared to the 1998 Incident-Based Iowa Uniform Crime Reports which are based on actual totals for all reporting Iowa law enforcement jurisdictions.

Concepts and Rationale for Regional Nitrogen Rate Guidelines for Corn, April 2006

Nitrogen (N) is typically one of the largest corn fertilization expenses. Nitrogen application is critical because it signifi cantly improves corn yield in many crop rotations. When choosing N rates, producers need to carefully consider both achieving most profi table economic return and advancing environmental stewardship. In 2004, university agronomists from the Corn Belt states began discussions regarding N rate use for corn production. The reasons for the discussions centered on apparent differences in methods for determining N rates across states, misperceptions regarding N rate guidelines, and concerns about application rates as corn yields have climbed to historic levels. An outcome of those discussions was an effort with the objectives to: ▪ develop N rate guidelines that could be applicable on a regional basis and ▪ identify the most profi table fertilizer N rates for corn production across the Corn Belt. This publication provides an overview of corn N fertilization in regard to rate of application, investigates concepts for determining economic application rates, and describes a suggested regional approach for developing corn N rate guidelines directly from recent research data.

Prison Return Rate Down, Data Download, Iowa Department of Corrections, October 2010

The Iowa Department of Corrections has set a goal to reduce the rate of return to prison – whether due to new convictions or technical violations – to 33.3%. Preliminary findings show that that goal has been achieved for FY 07 releasees, with recidivism rates the lowest among the three years studied.

Prison Return Rate Down, Data Download, Iowa Department of Corrections, October 2010

The Iowa Department of Corrections has set a goal to reduce the rate of return to prison – whether due to new convictions or technical violations – to 33.3%. Preliminary findings show that that goal has been achieved for FY 07 releasees, with recidivism rates the lowest among the three years studied.

Prison Return Rate Down-Again, Data Download, Department of Corrections

One of the key statistics that Iowa Corrections maintains to measure the success of our efforts is the three-year return-to-prison rate for offenders leaving prison and reentering the community. As the chart below shows, the rate for the three-year period from FY 2009 through FY 2012 is the lowest since this measure has been calculated.

Issue review : impact on the insurance premium tax rate reduction .

In 2002, Senate File 2318, Insurance Premium Tax Reduction Act, the Iowa General Assembly approved a reduction in the insurance premium tax rate from 2 percent to 1 percent. The reduction was phased in at the rate of 1/4 percent annual increments over a five-year period, beginning with life and health insurance policy payments made on or after January 1st, 2003. Calendar year 2007 was the first year all premiums were taxed at 1 percent and fiscal year 2008 was the first full fiscal year at the 1 percent rate. Insurance premiums tax is paid only by insurance companies. The companies that benefit from the tax reduction are uniquely identified in government employment statistics. This allows for a unique opportunity to evaluate both the revenue impact and the employment impact of the tax rate reduction in Senate File 2318. This issue review focuses on the General Fund revenue impact of the rate reduction and the Iowa employment trends for the insurance industry since the rate reduction legislation was approved.

Longitudinal Joint Forming in PCC Pavements, MLR-00-05, Construction Report, 2003

In conventional construction practices, a longitudinal joint is sawed in a PCC (Portland Cement Concrete) pavement to control concrete shrinkage cracking between two lanes of traffic. Sawing a joint in hardened concrete is an expensive and time consuming operation. The longitudinal joint is not a working joint (in comparison to a transverse joint) as it is typically tied with a tie bar at 30 inch spacing. The open joint reservoir, left by the saw blade, typically is filled or sealed with a durable crack sealant to keep incompressibles and water from getting into the joint reservoir. An experimental joint forming knife has been developed. It is installed under the paving machine to form the longitudinal joint in the wet concrete as a part of the paving process. Through this research method, forming a very narrow longitudinal joint during the paving process, two conventional paving operations can be eliminated. Joint forming eliminates the need of the joint sawing operation in the hard concrete, and as the joint that is formed does not leave a wide-open reservoir, but only a hairline crack, it does not need the joint filling or sealing operation. Therefore, the two conventional longitudinal joint sawing and sealing operations are both being eliminated by this innovation. A laboratory scale prototype joint forming knife was built and tested, initially forming joints in small concrete beams. The results were positive so the method was proposed for field testing. Initial field tests were done in the construction season of 2001, limited to one paving contractor. A number of modifications were made to the knife throughout the field tests. About 3000 feet of longitudinal joint was formed in 2001. Additional testing was done in the 2002 construction season, working with the same contractor. About 150,000 feet of longitudinal joint was formed in 2002. Evaluations of the formed joints were done to determine longitudinal joint hairline crack development rate and appearance. Additional tests will be done in the next construction season to improve or perfect the longitudinal joint forming technique.

Improving Portland Cement Concrete Mix Consistency and Production Rate through Two-Stage Mixing, TR-505, 2007

A two-stage mixing process for concrete involves mixing a slurry of cementitious materials and water, then adding the slurry to coarse and fine aggregate to form concrete. Some research has indicated that this process might facilitate dispersion of cementitious materials and improve cement hydration, the characteristics of the interfacial transition zone (ITZ) between aggregate and paste, and concrete homogeneity. The goal of the study was to find optimal mixing procedures for production of a homogeneous and workable mixture and quality concrete using a two-stage mixing operation. The specific objectives of the study are as follows: (1) To achieve optimal mixing energy and time for a homogeneous cementitious material, (2) To characterize the homogeneity and flow property of the pastes, (3) To investigate effective methods for coating aggregate particles with cement slurry, (4) To study the effect of the two-stage mixing procedure on concrete properties, (5) To obtain the improved production rates. Parameters measured for Phase I included: heat of hydration, maturity, and rheology tests were performed on the fresh paste samples, and compressive strength, degree of hydration, and scanning electron microscope (SEM) imaging tests were conducted on the cured specimens. For Phases II and III tests included slump and air content on fresh concrete and compressive and tensile strengths, rapid air void analysis, and rapid chloride permeability on hardened concrete.