Metric Training for the Transportation Industry Module I - Basic Introduction to the Use of International Units of Measure, HR-376

"Metric Training For The Highway Industry", HR-376 was designed to produce training materials for the various divisions of the Iowa DOT, local government and the highway construction industry. The project materials were to be used to introduce the highway industry in Iowa to metric measurements in their daily activities. Five modules were developed and used in training over 1,000 DOT, county, city, consultant and contractor staff in the use of metric measurements. The training modules developed deal with the planning through operation areas of highway transportation. The materials and selection of modules were developed with the aid of an advisory personnel from the highway industry. Each module is design as a four hour block of instruction and a stand along module for specific types of personnel. Each module is subdivided into four chapters with chapter one and four covering general topics common to all subjects. Chapters two and three are aimed at hands on experience for a specific group and subject. This module includes: Module 1 - Basic Introduction to the Use of International Units of Measurement. This module is designed for use by all levels of personnel, primarily office staff, and provides a basic background in the use of metric measurements in both written and oral communications.

Metric Short Course for the Office of Bridges and Structures, HR-378, 1995

This metric short course was developed in response to a request from the Office of Bridges and Structures to assist in the training of engineers in the use of metric units of measure which will be required in all highway designs and construction after September 30, 1996 (CFR Presidential Executive Order No. 12770). The course notes which are contained in this report, were developed for a half-day course. The course contains a brief review of metrication in the U.S., metric units, prefixes, symbols, basic conversions, etc. The unique part of the course is that it presents several typical bridge calculations (such as capacity of reinforced concrete compression members, strength of pile caps, etc.) worked two ways: inch-pound units throughout with end conversion to metric and initial hard conversion to metric with metric units throughout. Comparisons of partial results and final results (obtained by working the problems the two ways) are made for each of the example problems.

Standard Specifications for Highway and Bridge Construction, 2012

When referenced, the 2012 edition of the Iowa Department of Transportation’s (Iowa DOT) Standard Specifications for Highway and Bridge Construction shall be used for contract work awarded by the Iowa DOT. They may also be incorporated by reference in other contract work on secondary, urban, local systems, or other contract work in which the Iowa DOT has an interest. As modified by the General Supplemental Specifications, these Standard Specifications represent the minimum requirements and may be modified by Supplemental Specifications, Developmental Specifications, and Special Provisions on specific contracts. These Standard Specifications have been written so the Contractor’s responsibilities are indicated by plain language using the Imperative Mood and Active Voice form. Sentences are of the form: Construct isolation joints at all points where driveways meet other walks, curbs, or fixtures in the surface. Ensure finished members are true to detailed dimensions and free from twists, bends, open joints, or other defects resulting from faulty fabrication or defective work. Personnel preparing the JMF shall be Iowa DOT certified in bituminous mix design. The Contracting Authority’s responsibilities are (with some exceptions) indicated by the use of the modal verb “will”. Sentences are of the form: The Engineer will obtain and test density samples for each lot according to Materials I.M. 204. Payment will be the contract unit price for Fabric Reinforcement per square yard (square meter). These standard specifications contain dual units of measure: the United States Standard measure (English units) and the International System of Units (SI or “metric” units). The English units are expressed first then followed by the metric units in parentheses. The measurements expressed in the two systems are not necessarily equal. In some cases the measurements in metric units is a “hard” conversion of the English measurement; i.e. the metric unit has been approximated with a rounded, rationalized metric measurement that is easy to work with and remember. The proposal form will identify whether the work was designed and shall be constructed in English or metric units.

Iowa Juvenile Crime Prevention Community Grant Fund, 2000

The Division of Criminal & Juvenile Justice Planning, as a part of its duties to administer Iowa’s Juvenile Crime Prevention Community Grant Fund, compiled the information contained in this report. Persons involved in the preparation of this report include Eric Sage, Sonya Wendell, and Richard Moore. Much of the report’s descriptions of community projects was adapted from narrative information contained in the applications and progress reports of agencies and units of government throughout the state that are participating in the Juvenile Crime Prevention Community Grant Fund.

INAPIS(National Aging Program Information System) Activity Report State Fiscal Year 2004, March 3, 2005, Vers. 1

This report shows the number of older Iowans and units of service by service category from Title III funding of the Older Americans Act, through the Administration on Aging (AoA), the Iowa Senior Living Trust Fund and limited state general fund dollars. DEA hopes that this document and the information contained within can be a useful tool for making informed planning decisions. The information provided in this report is the result of hard work and dedication from the Iowa Aging Network who work as a team with the Iowa Department of Elder Affairs toward it’s mission: "To provide advocacy, educational, and prevention services to older Iowans so they can find Iowa a healthy, safe, productive, and enjoyable place to live and work.

INAPIS Activity Report State Fiscal Year 2005, December 2005,

This report shows the number of older Iowans and units of service by service category from Title III funding of the Older Americans Act, through the Administration on Aging (AoA), the Iowa Senior Living Trust Fund and limited state general fund dollars. DEA hopes that this document and the information contained within can be a useful tool for making informed planning decisions. The information provided in this report is the result of hard work and dedication from the Iowa Aging Network who work as a team with the Iowa Department of Elder Affairs toward it’s mission: "To provide advocacy, educational, and prevention services to older Iowans so they can find Iowa a healthy, safe, productive, and enjoyable place to live and work.

INAPIS Activity Report State Fiscal Year 2006, October 2006

This report shows the number of older Iowans and units of service by service category from Title III funding of the Older Americans Act, through the Administration on Aging (AoA), the Iowa Senior Living Trust Fund and limited state general fund dollars. DEA hopes that this document and the information contained within can be a useful tool for making informed planning decisions. The information provided in this report is the result of hard work and dedication from the Iowa Aging Network who work as a team with the Iowa Department of Elder Affairs toward it’s mission: "To provide advocacy, educational, and prevention services to older Iowans so they can find Iowa a healthy, safe, productive, and enjoyable place to live and work.

Biodiesel Facility Regulatory Assistance Guide, 2008

This guide is a general outline for bio diesel facilities on potential regulatory requirements and regulatory agency approval times. Much of the information is related to environmental permitting by the Iowa Department of Natural Resources (IDNR). Your facility’s permit requirements may differ depending upon the specific operations planned. Information is also provided about regulatory requirements administered by the Iowa Workforce Development, Labor Services Division and the Iowa Department of Public Safety, Fire Marshal Division. Requirements established by local units of government may also apply. Be sure to contact the city in which the facility will be located or the county if the facility is not located in a city, to identify these requirements.

Ethanol Facility Regulatory Assistance Guide, May 19, 2008

This guide is a general outline for ethanol facilities on potential regulatory requirements and regulatory agency approval times. Much of the information is related to environmental permitting by the Iowa Department of Natural Resources (IDNR). Your facility’s permit requirements may differ depending upon the specific operations planned. Information is also provided about regulatory requirements administered by the Iowa Workforce Development, Labor Services Division and the Iowa Department of Public Safety, Fire Marshal Division. Requirements established by local units of government may also apply. Be sure to contact the city in which the facility will be located or the county if the facility is not located in a city, to identify these requirements.

MEPDG Work Plan Task No. 7: Existing Pavement Input Information for the Mechanistic-Empirical Pavement Design Guide, 2009

The objective of this study is to systematically evaluate the Iowa Department of Transportation’s (DOT’s) existing Pavement Management Information System (PMIS) with respect to the input information required for Mechanistic-Empirical Pavement Design Guide (MEPDG) rehabilitation analysis and design. To accomplish this objective, all of available PMIS data for interstate and primary roads in Iowa were retrieved from the Iowa DOT PMIS. The retrieved data were evaluated with respect to the input requirements and outputs for the latest version of the MEPDG software (version 1.0). The input parameters that are required for MEPDG HMA rehabilitation design, but currently unavailable in the Iowa DOT PMIS were identified. The differences in the specific measurement metrics used and their units for some of the pavement performance measures between the Iowa DOT PMIS and MEPDG were identified and discussed. Based on the results of this study, it is recommended that the Iowa DOT PMIS should be updated, if possible, to include the identified parameters that are currently unavailable, but are required for MEPDG rehabilitation design. Similarly, the measurement units of distress survey results in the Iowa DOT PMIS should be revised to correspond to those of MEPDG performance predictions. *******************Large File**************************