Safety Impacts of Pavement Edge Drop-offs, 2006

A vehicle may leave its travel lane for a number of reasons, such as driver error, poor surface conditions, or avoidance of a collision with another vehicle in the travel lane. When a vehicle leaves the travel lane, pavement edge drop-off poses a potential safety hazard because significant vertical differences between surfaces can affect vehicle stability and reduce a driver’s ability to handle the vehicle. Numerous controlled studies have tested driver response to encountering drop-offs under various conditions, including different speeds, vehicle types, drop-off height and shape, and tire scrubbing versus non-scrubbing conditions. The studies evaluated the drivers’ ability to return to and recover within their own travel lane after leaving the roadway and encountering a drop-off. Many of these studies, however, have used professional drivers as test subjects, so results may not always apply to the population of average drivers. Furthermore, test subjects are always briefed on what generally is to be expected and how to respond; thus, the sense of surprise that a truly naïve driver may experience upon realizing that one or two of his or her tires have just dropped off the edge of the pavement, is very likely diminished. Additionally, the studies were carried out under controlled conditions. The actual impact of pavement edge drop-off on drivers’ ability to recover safely once they leave the roadway, however, is not well understood under actual driving conditions. Additionally, little information is available that quantifies the number or severity of crashes that occur where pavement edge drop-off may have been a contributing factor. Without sufficient information about the frequency of edge drop-off-related crashes, agencies are not fully able to measure the economic benefits of investment decisions, evaluate the effectiveness of different treatments to mitigate edge drop-off, or focus maintenance resources. To address these issues, this report details research to quantify the contribution of pavement edge drop-off to crash frequency and severity. Additionally, the study evaluated federal and state guidance in sampling and addressing pavement edge drop-off and quantified the extent of pavement edge drop-off in two states. This study focused on rural two-lane paved roadways with unpaved shoulders, since they are often high speed facilities (55+ mph), have varying levels of maintenance, and are likely to be characterized by adverse roadway conditions such as narrow lanes or no shoulders.

Cultural Heritage and Records Retention Task Force Report, August 2008

The Rebuild Iowa Cultural Heritage and Records Retention Task Force respectfully submits its report to the Rebuild Iowa Advisory Commission (RIAC) for its consideration of the impacts of the tornadoes, storms, and flooding on Iowans and their cultural, historical, and arts institutions and organizations and records collections and archives. As the RIAC fulfills its obligations to guide the recovery and reconstruction of Iowa, the cknowledgement that culture and records as Iowa’s identity is important, and that if these items of cultural heritage vanish from Iowa’s landscape, the items that Iowans associate with their history, traditions, and sense of place also disappears. Iowa is certainly not the only state that has experienced this type of disaster; however, many states have not recognized culture and records as critical concerns as part of the recovery and rebuilding process. When rebuilding Iowa stronger, smarter, and safer, quality of life is an important consideration for attracting new residents, making it a necessity to keep culture alive and thriving in Iowa. Additionally, the cultural arts constitute a vital economic industry, providing employment to thousands of Iowa’s citizens and generating millions of dollars in local and government revenue across the state. In the case of records, these items are irreplaceable and provide important information for the daily workings of government and life in our state, and maintain vital records of Iowa’s heritage and traditions. This report provides background information on the damages incurred in Iowa from the disasters and additional context for policy and rebuilding discussions. It also offers recommendations to the RIAC for steps that might be taken to address the significant and important challenges faced by Iowa’s cultural, historical, and arts institutions and organizations; individual artists and other cultural workers; and records retention entities and officials.

Supplemental Information to the August 2008 Cultural Heritage and Records Retention Task Force Report, August 2008

The Rebuild Iowa Cultural Heritage and Records Retention Task Force respectfully submits its report to the Rebuild Iowa Advisory Commission (RIAC) for its consideration of the impacts of the tornadoes, storms, and flooding on Iowans and their cultural, historical, and arts institutions and organizations and records collections and archives. As the RIAC fulfills its obligations to guide the recovery and reconstruction of Iowa, the cknowledgement that culture and records as Iowa’s identity is important, and that if these items of cultural heritage vanish from Iowa’s landscape, the items that Iowans associate with their history, traditions, and sense of place also disappears. Iowa is certainly not the only state that has experienced this type of disaster; however, many states have not recognized culture and records as critical concerns as part of the recovery and rebuilding process. When rebuilding Iowa stronger, smarter, and safer, quality of life is an important consideration for attracting new residents, making it a necessity to keep culture alive and thriving in Iowa. Additionally, the cultural arts constitute a vital economic industry, providing employment to thousands of Iowa’s citizens and generating millions of dollars in local and government revenue across the state. In the case of records, these items are irreplaceable and provide important information for the daily workings of government and life in our state, and maintain vital records of Iowa’s heritage and traditions. This report provides background information on the damages incurred in Iowa from the disasters and additional context for policy and rebuilding discussions. It also offers recommendations to the RIAC for steps that might be taken to address the significant and important challenges faced by Iowa’s cultural, historical, and arts institutions and organizations; individual artists and other cultural workers; and records retention entities and officials. Supplement to main report.

Development of Object-Oriented Design and Specifications for Iowa DOT and Urban Standards: Phase I, TR-487, 2004

Currently, individuals including designers, contractors, and owners learn about the project requirements by studying a combination of paper and electronic copies of the construction documents including the drawings, specifications (standard and supplemental), road and bridge standard drawings, design criteria, contracts, addenda, and change orders. This can be a tedious process since one needs to go back and forth between the various documents (paper or electronic) to obtain information about the entire project. Object-oriented computer-aided design (OO-CAD) is an innovative technology that can bring a change to this process by graphical portrayal of information. OO-CAD allows users to point and click on portions of an object-oriented drawing that are then linked to relevant databases of information (e.g., specifications, procurement status, and shop drawings). The vision of this study is to turn paper-based design standards and construction specifications into an object-oriented design and specification (OODAS) system or a visual electronic reference library (ERL). Individuals can use the system through a handheld wireless book-size laptop that includes all of the necessary software for operating in a 3D environment. All parties involved in transportation projects can access all of the standards and requirements simultaneously using a 3D graphical interface. By using this system, users will have all of the design elements and all of the specifications readily available without concerns of omissions. A prototype object-oriented model was created and demonstrated to potential users representing counties, cities, and the state. Findings suggest that a system like this could improve productivity to find information by as much as 75% and provide a greater sense of confidence that all relevant information had been identified. It was also apparent that this system would be used by more people in construction than in design. There was also concern related to the cost to develop and maintain the complete system. The future direction should focus on a project-based system that can help the contractors and DOT inspectors find information (e.g., road standards, specifications, instructional memorandums) more rapidly as it pertains to a specific project.