A Transportation Safety Planning Tool for the City of Ames, August 2011

The historically-reactive approach to identifying safety problems and mitigating them involves selecting black spots or hot spots by ranking locations based on crash frequency and severity. The approach focuses mainly on the corridor level without taking the exposure rate (vehicle miles traveled) and socio-demographics information of the study area, which are very important in the transportation planning process, into consideration. A larger study analysis unit at the Transportation Analysis Zone (TAZ) level or the network planning level should be used to address the needs of development of the community in the future and incorporate safety into the long-range transportation planning process. In this study, existing planning tools (such as the PLANSAFE models presented in NCHRP Report 546) were evaluated for forecasting safety in small and medium-sized communities, particularly as related to changes in socio-demographics characteristics, traffic demand, road network, and countermeasures. The research also evaluated the applicability of the Empirical Bayes (EB) method to network-level analysis. In addition, application of the United States Road Assessment Program (usRAP) protocols at the local urban road network level was investigated. This research evaluated the applicability of these three methods for the City of Ames, Iowa. The outcome of this research is a systematic process and framework for considering road safety issues explicitly in the small and medium-sized community transportation planning process and for quantifying the safety impacts of new developments and policy programs. More specifically, quantitative safety may be incorporated into the planning process, through effective visualization and increased awareness of safety issues (usRAP), the identification of high-risk locations with potential for improvement, (usRAP maps and EB), countermeasures for high-risk locations (EB before and after study and PLANSAFE), and socio-economic and demographic induced changes at the planning-level (PLANSAFE).

Scenic Byways: Their Selection, Designation, Protection and Safety, 1992

There is now a nationwide effort (the Scenic Byways Movement) to focus attention on the need to develop scenic byways and on their potential for enhancing tourism and recreation; to create coalitions and strategies to actually develop the byways; and, alternatively, to see that the job gets done. As part of this nationwide effort, the Transportation Departments of Iowa, Kansas, Missouri and Nebraska sponsored this project so they might obtain guidance related to Scenic Byways programs that may be developed in each state. The following issues are addressed in this report: scenic quality, road safety, scenic byway designation, and scenic byway information.

Safety Assessment Tool for Construction Zone Work Phasing Plans, 2016

The Highway Safety Manual (HSM) is the compilation of national safety research that provides quantitative methods for analyzing highway safety. The HSM presents crash modification functions related to freeway work zone characteristics such as work zone duration and length. These crash modification functions were based on freeway work zones with high traffic volumes in California. When the HSM-referenced model was calibrated for Missouri, the value was 3.78, which is not ideal since it is significantly larger than 1. Therefore, new models were developed in this study using Missouri data to capture geographical, driver behavior, and other factors in the Midwest. Also, new models for expressway and rural two-lane work zones that barely were studied in the literature were developed. A large sample of 20,837 freeway, 8,993 expressway, and 64,476 rural two-lane work zones in Missouri was analyzed to derive 15 work zone crash prediction models. The most appropriate samples of 1,546 freeway, 1,189 expressway, and 6,095 rural two-lane work zones longer than 0.1 mile and with a duration of greater than 10 days were used to make eight, four, and three models, respectively. A challenging question for practitioners is always how to use crash prediction models to make the best estimation of work zone crash count. To solve this problem, a user-friendly software tool was developed in a spreadsheet format to predict work zone crashes based on work zone characteristics. This software selects the best model, estimates the work zone crashes by severity, and converts them to monetary values using standard crash estimates. This study also included a survey of departments of transportation (DOTs), Federal Highway Administration (FHWA) representatives, and contractors to assess the current state of the practice regarding work zone safety. The survey results indicate that many agencies look at work zone safety informally using engineering judgment. Respondents indicated that they would like a tool that could help them to balance work zone safety across projects by looking at crashes and user costs.

Transportation Policy Strategies for Iowa to Advance the Quality of Life, 2004

Building on the policy directions advanced in the publication "Policy Strategies for Iowa in Making Major Road Investments", this report defines each policy issue and discusses how transportation can play a role in addressing it. Perspectives from several focus group meetings conducted in nine communities in Iowa are discussed. The report also examines available data pertaining to the issues. Finally, the report presents several specific recommendations dealing with issues on economic development, safety, choice of transportation modes, and financing transportation in the future. The recommendations are directed at proving the Iowa Transportation Commission with the best possible insights to be used in making investment decisions that will impact the quality of life in Iowa in future years.

2015 Iowa Traffic Fatality Count, March 31, 2016

A fatality is considered "crash-related" when death occurs within 30 days of a crash. Because complex crash investigations can delay the official report of fatalities, the numbers for the most current months are preliminary and can change considerably.

Drivers' Behavior at Railroad Grade Crossings: Before and After Safety Campaign, HR-335, Survey Data Summaries, 1992

Summaries of the data gathered for this project.

2000 Seat Belt Usage Survey, September 13, 2001

The good news is that safety belt usage on municipal road systems (city streets) increased 1.07 percent. This is encouraging since more than 45 percent of all motor vehicle crashes occur on city streets, and usage on the municipal road system has consistently been the lowest of the road systems studied. In communities where usage is good, enforcement and public education must be maintained in order to improve usage further; in communities where usage is still low, enforcement and public education must both be increased. Usage on the primary system (U.S. or state highways) rose 1.01 percent from the previous year. This is also welcome news because almost half of all fatalities (49 percent) occur on the primary road system. There was a decline in interstate belt use (-1.45 percent). Despite this decrease interstate usage is still traditionally the highest of all roadway categories presumably because the longer trips, higher travel speeds and large number of vehicles cause drivers to assume there is greater risk.

Analysis of Policies for Safety Improvements on Low-Volume Rural Roadways,1994

In order to determine the adequacy with which safety problems on low-volume rural roadways were addressed by the four states of Federal Region VII (Iowa, Kansas, Missouri, and Nebraska), a review was made of the states' safety policies. After reviewing literature dealing with the identification of hazardous locations, evaluation methodologies, and system-wide safety improvements, a survey of the states' safety policies was conducted. An official from each state was questioned about the various aspects and procedures dealing with safety improvements. After analyzing and comparing the remarkably diverse policies, recommendations were made in the form of a model safety program. This program included special modifications that would help remediate hazards on low-volume rural roadways. Especially encouraged is a system-wide approach to improvement which would cover all parts of the highway system, not just urban and high-volume roadways.

Iowa Construction and Maintenance Traffic Control Handbook, 1976

This Handbook has been prepared by the Iowa DOT as a guide and supplement to the MUTCD. It provides in one document a large number of illustrations which can be easily adapted to specific conditions by field personnel. It is intended to supersede all previous non-conforming standards now being used throughout the state and to provide uniform guidelines for all agencies, public and private, who must conduct construction and maintenance activities on the streets and highways of the state. The illustrations contained herein serve as a quick reference for field personnel to follow, however, no amount of detailed instructions can adequately cover every situation. For this reason, sound judgment is required in using these illustrations to cover actual field conditions.

Upgrading Bridge Rails on Low-Volume Roads in Iowa, TR-679, 2016

Building on previous research, the goal of this project was to identify significant influencing factors for the Iowa Department of Transportation (DOT) to consider in future updates of its Instructional Memorandum (I.M.) 3.213, which provides guidelines for determining the need for traffic barriers (guardrail and bridge rail) at secondary roadway bridges—specifically, factors that might be significant for the bridge rail rating system component of I.M. 3.213. A literature review was conducted of policies and guidelines in other states and, specifically, of studies related to traffic barrier safety countermeasures at bridges in several states. In addition, a safety impact study was conducted to evaluate possible non-driver-related behavior characteristics of crashes on secondary road structures in Iowa using road data, structure data, and crash data from 2004 to 2013. Statistical models (negative binomial regression) were used to determine which factors were significant in terms of crash volume and crash severity. The study found that crashes are somewhat more frequent on or at bridges possessing certain characteristics—traffic volume greater than 400 vehicles per day (vpd) (paved) or greater than 50 vpd (unpaved), bridge length greater than 150 ft (paved) or greater than 35 ft (unpaved), bridge width narrower than its approach (paved) or narrower than 20 ft (unpaved), and bridges older than 25 years (both paved and unpaved). No specific roadway or bridge characteristic was found to contribute to more serious crashes. The study also confirmed previous research findings that crashes with bridges on secondary roads are rare, low-severity events. Although the findings of the study support the need for appropriate use of bridge rails, it concludes that prescriptive guidelines for bridge rail use on secondary roads may not be necessary, given the limited crash expectancy and lack of differences in crash expectancy among the various combinations of explanatory characteristics.

Safety Edge Crash Modification Factors, Tech Brief, 2016

This study evaluated the safety impact of the Safety Edge for construction projects in 2010 and 2011 in Iowa to assess the effectiveness of the treatment in reducing crashes.

A compilation of traffic regulations in thirteen Iowa cities / by Laurence W. Murray [and] Alfred B. Bowman, 1936

This questionnaire was circulated in order to discover traffic problems. No preparation was made to meet the problem with the tools of science, and as a result traffic ordinances have grown like traffic problems, without design.