Iowa 2088 Summer Storms After-Action Report Final, April 27, 2009

In the summer of 2008, the state of Iowa suffered from a series of severe storms that produced tornadoes and heavy rainfall, which resulted in widespread flooding. The Summer Storms1 lasted from late May through mid-August, with the most intense storms occurring over a month-long period from May 25 to June 25. The Summer Storms exacted a major human and economic toll on Iowa, resulting in 18 fatalities and 106 injuries, forcing the evacuation of approximately 38,000 Iowans, and impacting 21,000 housing units. Iowa’s public and private sectors suffered significant monetary damages. Eighty-six of the ninety-nine counties in the state were included in the Governor’s disaster declarations. Presidential disaster declarations made residents in 84 counties eligible for Public Assistance and 78 counties for Individual Assistance. The Rebuild Iowa Advisory Commission estimated $798.3 million in damages to publicly owned buildings and infrastructure, including damages of $53 million to public transportation and $342 million to public utilities. The 2008 Summer Storms presented unique coordination challenges for the Iowa Homeland Security and Emergency Management Division (HSEMD) and the State Emergency Operations Center (SEOC). These challenges arose from three interrelated factors: the large number of local jurisdictions and areas impacted, the prolonged period of time that response operations were conducted, and the increasing complexity of overall response operations. These events caused the SEOC to coordinate response, mitigation, recovery, and preparedness operations simultaneously. HSEMD and the SEOC implemented a variety of measures to enhance their ability to coordinate operations and assistance to localities. The SEOC expanded its organizational structure, implemented innovative techniques, and incorporated new partners into its activities. These steps enabled HSEMD and SEOC to coordinate operations more effectively, which undoubtedly helped save lives and property, while mitigating the effects of the 2008 Summer Storms.

Iowa Power Fund Board Project Report Update, July 29, 2009

Climate refers to the long-term course or condition of weather, usually over a time scale of decades and longer. It has been documented that our global climate is changing (IPCC 2007, Copenhagen Diagnosis 2009), and Iowa is no exception. In Iowa, statistically significant changes in our precipitation, streamflow, nighttime minimum temperatures, winter average temperatures, and dewpoint humidity readings have occurred during the past few decades. Iowans are already living with warmer winters, longer growing seasons, warmer nights, higher dew-point temperatures, increased humidity, greater annual streamflows, and more frequent severe precipitation events (Fig. 1-1) than were prevalent during the past 50 years. Some of the impacts of these changes could be construed as positive, and some are negative, particularly the tendency for greater precipitation events and flooding. In the near-term, we may expect these trends to continue as long as climate change is prolonged and exacerbated by increasing greenhouse gas emissions globally from the use of fossil fuels and fertilizers, the clearing of land, and agricultural and industrial emissions. This report documents the impacts of changing climate on Iowa during the past 50 years. It seeks to answer the question, “What are the impacts of climate change in Iowa that have been observed already?” And, “What are the effects on public health, our flora and fauna, agriculture, and the general economy of Iowa?”

RFID Tags for Detecting Concrete Degradation in Bridge Decks, RB08-011, 2013

Steel reinforcing bar (rebar) corrosion due to chlorine ingress is the primary degradation mechanism for bridge decks. In areas where rock salt is used as a de-icing agent, salt water seeps into the concrete through cracks, causing corrosion of the rebar and potentially leading to catastrophic failure if not repaired. This project explores the use of radio frequency identification (RFID) tags as low-cost corrosion sensors. RFID tags, when embedded in concrete, will fail due to corrosion in the same manner as rebar after prolonged exposure to salt water. In addition, the presence of salt water interferes with the ability to detect the tags, providing a secondary mechanism by which this method can work. During this project, a fieldable RFID equipment setup was constructed and tested. In addition to a number of laboratory experiments to validate the underlying principles, RFID tags were embedded and tested in several actual bridge decks. Two major challenges were addressed in this project: issues associated with tags not functioning due to being in close proximity to rebar and issues associated with portland concrete coming in direct contact with the tags causing a detuning effect and preventing the tags from operating properly. Both issues were investigated thoroughly. The first issue was determined to be a problem only if the tags are placed in close proximity to rebar. The second issue was resolved by encapsulating the tag. Two materials, polyurethane spray foam and extruded polystyrene, were identified as providing good performance after testing, both in the lab and in the field.