Iowa Influenza Surveillance Network Final Report 2006-2008

The Iowa Influenza Surveillance Network (IISN) tracks the overall activity, age groups impacted, outbreaks, type and strain, and severity of seasonal influenza. In the 2006-2007 season the network had more than 90 reporting sites that included physicians, clinics, hospitals, schools and long term care facilities (Appendix A). Other non-network reporters who contributed influenza data included medical clinics, hospitals, laboratories, local public health departments and neighboring state health departments. 010203040506070424548495051521234567891011121314MMWR weekNumber of cases2006-20072005-2006 The 2006-2007 influenza season in Iowa began earlier than any previously recorded data indicates, however, the season’s peak occurred much later in the season. In addition to early cases, this season was also unusual in that all three anticipated strains (AH1N1, AH3N2, and B) were reported by the first of December (Appendix B). The first laboratory-confirmed case in the 2005-2006 season was identified December 5, 2005; the first case for the 2006-2007 season was on November 2, 2006. The predominant strain for 2005-2006 was influenza AH3, but for 2006-2007 both influenza AH1 and B dominated influenza infections. However improvements in influenza specimen submission to the University Hygienic Laboratory may have also played a role in early detection and overall case detection. In summary, all influenza activity indicators show a peak between the MMWR weeks 5 and 9 (i.e. February 14- March 4). Children from five years to eight years of age were impacted more than other age groups. There were few influenza hospitalizations and fatalities in all age groups.

Dynamics of Highway Bridges, HR-67, 1961

The AASHO specifications for highway bridges require that in designing a bridge, the live load must be multiplied by an impact factor for which a formula is given, dependent only upon the length of the bridge. This formula is a result of August Wohler's tests on fatigue in metals, in which he determined that metals which are subjected to large alternating loads will ultimately fail at lower stresses than those which are subjected only to continuous static loads. It is felt by some investigators that this present impact factor is not realistic, and it is suggested that a consideration of the increased stress due to vibrations caused by vehicles traversing the span would result in a more realistic impact factor than now exists. Since the current highway program requires a large number of bridges to be built, the need for data on dynamic behavior of bridges is apparent. Much excellent material has already been gathered on the subject, but many questions remain unanswered. This work is designed to investigate further a specific corner of that subject, and it is hoped that some useful light may be shed on the subject. Specifically this study hopes to correlate, by experiment on a small scale test bridge, the upper limits of impact utilizing a stationary, oscillating load to represent axle loads moving past a given point. The experiments were performed on a small scale bridge which is located in the basement of the Iowa Engineering Experiment Station. The bridge is a 25 foot simply supported span, 10 feet wide, supported by four beams with a composite concrete slab. It is assumed that the magnitude of the predominant forcing function is the same as the magnitude of the dynamic force produced by a smoothly rolling load, which has a frequency determined by the passage of axles. The frequency of passage of axles is defined as the speed of the vehicle divided by the axle spacing. Factors affecting the response of the bridge to this forcing function are the bridge stiffness and mass, which determine the natural frequency, and the effects of solid damping due to internal structural energy dissipation.

Air Content and Permeability of PCC Pavements: 1909 to 2006, MLR-05-02, 2007

Portland cement concrete pavements have given excellent service history for Iowa. Many of these pavements placed during the 1920’s and 1930’s are still in service today. Many factors go in to achieve a long term durable concrete pavement. Probably the most important is the durability of the aggregate. Until the 1930’s, pit run gravel was the most predominant aggregate used. Many of these gravels provided long term performance and their durability is dependent upon the carbonate fraction of the gravel. Later, limestone (calcium carbonate) and dolomite (calcium, magnesium carbonate) sources were mined across Iowa. The durability of these carbonate aggregates is largely dependent upon the pore system which can cause freeze thaw problems known as D-cracking, which was a problem with some sources during the 1960’s. Also, some of these carbonate aggregates are also susceptible to deterioration from deicing salts. Geologists have identified the major components that affect the durability of these carbonate aggregates and sources are tested to ensure long term performance in Portland cement concrete. Air entrainment was originally put in concrete to improve scaling resistance. It is well known that air entrainment is required to provide freeze thaw protection in concrete pavements today. In Iowa, air entrainment was not introduced in concrete pavements until 1952. This research investigates properties that made older concrete pavements durable without air entrainment.