Iowa Department of Vocational Rehabilitation Agency Performance Plan

Agency Performance Plan

Iowa State Rehabilitation Council 2003-2004 Annual Report

This Council was mandated by the 1992 Amendments to the Rehabilitation Act. Report includes mission, Council duties, accomplishments throughout the year, and member biographies.

Development of a Mix Design Process for Cold-in-Place Rehabilitation Using Foamed Asphalt, December 2005

Report by Iowa Department of Transportation about pavements materials.

Iowa Department of Education, Division of Vocational Rehabilitation, Notification Letter, April 14th, 2005

State Audit Reports

Iowa Vocational Rehabilitation Performance Report, FY 2005

Agency Performance Report

Iowa Vocational Rehabilitation Performance Report, FY 2004

Agency Performance Report

Iowa Vocational Rehabilitation Performance Report, FY 2005

Agency Performance Report

Rehabilitation of Concrete Pavements Utilizing Rebblization and Crack and Seat Methods, June 2005

Deterioration in portland cement concrete (PCC) pavements can occur due to distresses caused by a combination of traffic loads and weather conditions. Hot mix asphalt (HMA) overlay is the most commonly used rehabilitation technique for such deteriorated PCC pavements. However, the performance of these HMA overlaid pavements is hindered due to the occurrence of reflective cracking, resulting in significant reduction of pavement serviceability. Various fractured slab techniques, including rubblization, crack and seat, and break and seat are used to minimize reflective cracking by reducing the slab action. However, the design of structural overlay thickness for cracked and seated and rubblized pavements is difficult as the resulting structure is neither a “true” rigid pavement nor a “true” flexible pavement. Existing design methodologies use the empirical procedures based on the AASHO Road Test conducted in 1961. But, the AASHO Road Test did not employ any fractured slab technique, and there are numerous limitations associated with extrapolating its results to HMA overlay thickness design for fractured PCC pavements. The main objective of this project is to develop a mechanistic-empirical (ME) design approach for the HMA overlay thickness design for fractured PCC pavements. In this design procedure, failure criteria such as the tensile strain at the bottom of HMA layer and the vertical compressive strain on the surface of subgrade are used to consider HMA fatigue and subgrade rutting, respectively. The developed ME design system is also implemented in a Visual Basic computer program. A partial validation of the design method with reference to an instrumented trial project (IA-141, Polk County) in Iowa is provided in this report. Tensile strain values at the bottom of the HMA layer collected from the FWD testing at this project site are in agreement with the results obtained from the developed computer program.

Iowa State Rehabilitation Council Annual Report 2005-2006, December 31, 2007

Annual Report for Iowa Vocational Rehabilitation Services (IVRS), a division of the Iowa Department of Education, is committed to working for and with individuals who have disabilities to achieve their employment, independence and economic goals. This document contains information highlighting the accomplishments of IVRS this year.

Iowa Department of Vocational Rehabilitation Agency Performance Plan, 2007

Agency Performance Plan

Validation of the New Mix Design Process for Cold In-Place Rehabilitation Using Foamed Asphalt, 2007

Asphalt pavement recycling has grown dramatically over the last few years as a viable technology to rehabilitate existing asphalt pavements. Iowa's current Cold In-place Recycling (CIR) practice utilizes a generic recipe specification to define the characteristics of the CIR mixture. As CIR continues to evolve, the desire to place CIR mixture with specific engineering properties requires the use of a mix design process. A new mix design procedure was developed for Cold In-place Recycling using foamed asphalt (CIR-foam) in consideration of its predicted field performance. The new laboratory mix design process was validated against various Reclaimed Asphalt Pavement (RAP) materials to determine its consistency over a wide range of RAP materials available throughout Iowa. The performance tests, which include dynamic modulus test, dynamic creep test and raveling test, were conducted to evaluate the consistency of a new CIR-foam mix design process to ensure reliable mixture performance over a wide range of traffic and climatic conditions. The “lab designed” CIR will allow the pavement designer to take the properties of the CIR into account when determining the overlay thickness.

Report of recommendations to the Iowa Department of Education, Division of Vocational Rehabilitation Services, June 30, 2007

Report on the Iowa Department of Education, Division of Vocational Rehabilitation Services for the year ended June 30, 2007

Department of Education, Iowa Vocational Rehabilitation Services Performance Plan, FY 2009

Agency Performance Plan, Department of Education, Iowa Vocational Rehabilitation Services

Iowa Vocational Rehabilitation Services Strategic Plan, 2007-2010

This report outlines the strategic plan for Iowa Vocational Rehabilitation Services, goals and mission.

Report of recommendations to the Iowa Department of Education, Division of Vocational Rehabilitation Services, June 30, 2008

Report on the Iowa Department of Education, Division of Vocational Rehabilitation Services for the year ended June 30, 2008