Dynamic Simulation Methods for Evaluating Motor Vehicle and Roadway Design and Resolving Policy Issues, 1990

This study had three objectives: (1) to develop a comprehensive truck simulation that executes rapidly, has a modular program construction to allow variation of vehicle characteristics, and is able to realistically predict vehicle motion and the tire-road surface interaction forces; (2) to develop a model of doweled portland cement concrete pavement that can be used to determine slab deflection and stress at predetermined nodes, and that allows for the variation of traditional thickness design factors; and (3) to implement these two models on a work station with suitable menu driven modules so that both existing and proposed pavements can be evaluated with respect to design life, given specific characteristics of the heavy vehicles that will be using the facility. This report summarizes the work that has been performed during the first year of the study. Briefly, the following has been accomplished: A two dimensional model of a typical 3-S2 tractor-trailer combination was created. A finite element structural analysis program, ANSYS, was used to model the pavement. Computer runs have been performed varying the parameters defining both vehicle and road elements. The resulting time specific displacements for each node are plotted, and the displacement basin is generated for defined vehicles. Relative damage to the pavement can then be estimated. A damage function resulting from load replications must be assumed that will be reflected by further pavement deterioration. Comparison with actual damage on Interstate 80 will eventually allow verification of these procedures.

Report on a review of the operations of the Cerro Gordo County Treasurer’s Office, Motor Vehicle Department for the period January 1, 2013 through June 30, 2015

Report on a review of the operations of the Cerro Gordo County Treasurer’s Office, Motor Vehicle Department for the period January 1, 2013 through June 30, 2015

Iowa Motor Vehicle Crashes 1925 to 2014

Iowa motor vehicle crashes spreadsheet, years 1925-2014

Project Evaluation: Iowa Motor Vehicle Fuel Reduction Program, 1989

The results of a study which evaluates the Iowa Motor Vehicle Fuel Reduction Program have been summarized and described in this report. The Iowa Motor Vehicle Fuel Reduction Program was designed to demonstrate fuel savings through traffic signal modernization projects and provide direct benefits to motorists in Iowa.

Iowa Motor Vehicle Fuel Reduction Program, 1989

This report documents the results of a three million dollar traffic signal improvement demonstration program, known as the Iowa Motor Vehicle Fuel Reduction Program (the program). The program was funded with the use of oil overcharge funds and administered by the Iowa Departments of Natural Resources and Transportation. The objective of the program was to provide restitution to overcharged motorists by improving the efficiency of traffic signals. More efficient traffic signals reduce fuel consumption, delay, travel time, and automobile pollution while improving traffic safety. The program demonstrated the effectiveness of improving traffic signals and resulted in a 14.20-to-1 benefit-to-cost ratio.

2000 Seat Belt Usage Survey, September 13, 2001

The good news is that safety belt usage on municipal road systems (city streets) increased 1.07 percent. This is encouraging since more than 45 percent of all motor vehicle crashes occur on city streets, and usage on the municipal road system has consistently been the lowest of the road systems studied. In communities where usage is good, enforcement and public education must be maintained in order to improve usage further; in communities where usage is still low, enforcement and public education must both be increased. Usage on the primary system (U.S. or state highways) rose 1.01 percent from the previous year. This is also welcome news because almost half of all fatalities (49 percent) occur on the primary road system. There was a decline in interstate belt use (-1.45 percent). Despite this decrease interstate usage is still traditionally the highest of all roadway categories presumably because the longer trips, higher travel speeds and large number of vehicles cause drivers to assume there is greater risk.

2005 Seat Belt Usage Survey, June 12, 2006

During the spring and summer of 2005, two surveys were taken of motor vehicle drivers’ and passengers’ seat belt usage. These surveys are before and after parts of the “Click it or Ticket” education and enforcement campaign. The whole project starts with a pre-campaign survey followed by the four-week public information, education and enforcement campaign. Finally, the postcampaign survey is taken to test the effectiveness of the education and enforcement campaign. In the pre-campaign survey of seat belt usage, the usage/non-usage of 15,444 front seat occupants of cars, vans, SUVs and pickups were observed at 100 locations. In the post-campaign survey of seat belt usage, 15,731 observations were made of front seat occupants of cars, vans, SUVs and pickups. The day of the week and time of day the observations took place were selected for each site using a random number generation computer program.

2006 Seat Belt Usage Survey, April 28, 2011

Surveys were taken of motor vehicle drivers’ and passengers’ seat belt usage. These surveys are before and after parts of the “Click it or Ticket” education and enforcement campaign. The whole project starts with a pre-campaign survey followed by the four-week public information, education and enforcement campaign. Finally, the postcampaign survey is taken to test the effectiveness of the education and enforcement campaign.

2007 Seat Belt Usage Survey, April 28, 2011

Surveys were taken of motor vehicle drivers’ and passengers’ seat belt usage. These surveys are before and after parts of the “Click it or Ticket” education and enforcement campaign. The whole project starts with a pre-campaign survey followed by the four-week public information, education and enforcement campaign. Finally, the postcampaign survey is taken to test the effectiveness of the education and enforcement campaign.

2008 Seat Belt Usage Survey, April 28, 2011

Surveys were taken of motor vehicle drivers’ and passengers’ seat belt usage. These surveys are before and after parts of the “Click it or Ticket” education and enforcement campaign. The whole project starts with a pre-campaign survey followed by the four-week public information, education and enforcement campaign. Finally, the postcampaign survey is taken to test the effectiveness of the education and enforcement campaign.

2010 Seat Belt Usage Survey, April 28, 2011

Surveys were taken of motor vehicle drivers’ and passengers’ seat belt usage. These surveys are before and after parts of the “Click it or Ticket” education and enforcement campaign. The whole project starts with a pre-campaign survey followed by the four-week public information, education and enforcement campaign. Finally, the postcampaign survey is taken to test the effectiveness of the education and enforcement campaign.

2009 Seat Belt Usage Survey, April 28, 2011

Surveys were taken of motor vehicle drivers’ and passengers’ seat belt usage. These surveys are before and after parts of the “Click it or Ticket” education and enforcement campaign. The whole project starts with a pre-campaign survey followed by the four-week public information, education and enforcement campaign. Finally, the postcampaign survey is taken to test the effectiveness of the education and enforcement campaign.

2011 Seat Belt Usage Survey, July 20, 2011

Surveys were taken of motor vehicle drivers’ and passengers’ seat belt usage. These surveys are before and after parts of the “Click it or Ticket” education and enforcement campaign. The whole project starts with a pre-campaign survey followed by the four-week public information, education and enforcement campaign. Finally, the postcampaign survey is taken to test the effectiveness of the education and enforcement campaign.