Iowa DOT Library Services, Collection, & Technology Assessment, TR-670, 2014

Assesses the impact of library services on research projects, proposes methods to improve the impact of library services on research projects, assesses current library technology systems and proposes upgrades, assesses current library collection infrastructure and propose upgrades, especially in regards to collection damage from water or fire; ascertains patron interest in mobile technologies and suggest development based on interest.

Development of a Method to Determine Pavement Damage Due to Detours, Project 02-105, Apirl 2005

The research presented in this report provides the basis for the development of a new procedure to be used by the Iowa DOT and cities and counties in the state to deal with detours. Even though the project initially focused on investigating new tools to determine condition and compensation, the focus was shifted to traffic and the gas tax method to set the basis for the new procedure. It was concluded that the condition-based approach, even though accurate and consistent condition evaluations can be achieved, is not feasible or cost effective because of the current practices of data collection (two-year cycle) and also the logistics of the procedure (before and after determination). The gas tax method provides for a simple, easy to implement, and consistent approach to dealing with compensation for use of detours. It removes the subjectivity out of the current procedures and provides for a more realistic (traffic based) approach to the compensation determination.

Development of In-Situ Detection Methods for Materials-Related Distress (MRD) in Concrete Pavements, July 2003

The purpose of this research was to summarize existing nondestructive test methods that have the potential to be used to detect materials-related distress (MRD) in concrete pavements. The various nondestructive test methods were then subjected to selection criteria that helped to reduce the size of the list so that specific techniques could be investigated in more detail. The main test methods that were determined to be applicable to this study included two stress-wave propagation techniques (impact-echo and spectral analysis of surface waves techniques), infrared thermography, ground penetrating radar (GPR), and visual inspection. The GPR technique was selected for a preliminary round of “proof of concept” trials. GPR surveys were carried out over a variety of portland cement concrete pavements for this study using two different systems. One of the systems was a state-of-the-art GPR system that allowed data to be collected at highway speeds. The other system was a less sophisticated system that was commercially available. Surveys conducted with both sets of equipment have produced test results capable of identifying subsurface distress in two of the three sites that exhibited internal cracking due to MRD. Both systems failed to detect distress in a single pavement that exhibited extensive cracking. Both systems correctly indicated that the control pavement exhibited negligible evidence of distress. The initial positive results presented here indicate that a more thorough study (incorporating refinements to the system, data collection, and analysis) is needed. Improvements in the results will be dependent upon defining the optimum number and arrangement of GPR antennas to detect the most common problems in Iowa pavements. In addition, refining highfrequency antenna response characteristics will be a crucial step toward providing an optimum GPR system for detecting materialsrelated distress.

State Library of Iowa Library Services and Technology Act Five-Year Plan, 2002

The Iowa Commission of Libraries, the State Library’s governing board, convened the Library Services Task Force in August 2000. This group consisted of 46 Iowans from across the state, including librarians from all types of libraries, library trustees, legislators, members of Iowa Regional Library system (now called Library Service Areas) and Area Education Agencies, and citizens. Their mission was to make recommendations to the Commission on positioning libraries to effectively and efficiently meet the future needs of Iowans. Needs and expectations of Iowa Library customers and funding authorities were identified and examined by the Task Force, and are reflected in its recommendations. The Commission received the Task Force recommendations in December 2000, carefully studied them, solicited input from the Iowa library community, and with a few changes, forwarded the recommendations to the Governor and the Iowa General Assembly. These recommendations are now known as Iowa Commission of Libraries priorities and serve as a blueprint for future development of the Iowa library system.

State Library of Iowa Library Services and Technology Act Five-Year Plan, 2002

The Iowa Commission of Libraries, the State Library’s governing board, convened the Library Services Task Force in August 2000. This group consisted of 46 Iowans from across the state, including librarians from all types of libraries, library trustees, legislators, members of Iowa Regional Library system (now called Library Service Areas) and Area Education Agencies, and citizens. Their mission was to make recommendations to the Commission on positioning libraries to effectively and efficiently meet the future needs of Iowans. Needs and expectations of Iowa Library customers and funding authorities were identified and examined by the Task Force, and are reflected in its recommendations. The Commission received the Task Force recommendations in December 2000, carefully studied them, solicited input from the Iowa library community, and with a few changes, forwarded the recommendations to the Governor and the Iowa General Assembly. These recommendations are now known as Iowa Commission of Libraries priorities and serve as a blueprint for future development of the Iowa library system.

Impact of Federal Library Services and Technology Act Funds in Iowa, May 2007.

A report that Mary Wegner gave Iowa's congressmen and senators during this year's ALA Legislative Day in Washington, DC. The report reflects the important ways the State Library uses LSTA funds to help Iowa libraries provide the best service possible to their customers. LSTA funds also pay the salaries of Library Development staff.

Iowa Library Services Reorganization Report, 2010.

Legislation passed during the 2010 legislative session required a study of ways to streamline state-funded library operations and services. The Iowa Library Association was asked to lead this endeavor and named a committee to carry out the study. The study resulted in the development of a plan for reorganization, which is outlined in the Iowa Library Services Reorganization Report. The Iowa Library Reorganization Committee was representative of the Library Services Areas, the State Library of Iowa, and public libraries of all sizes from all around the state. The president of the Iowa Library Association and the State Librarian also served as members of the Committee. The report was submitted to members of the Iowa legislature on November 1, 2010.

In Service to Iowa : Public Library Standards, 5th edition, 2010

The Standards and Accreditation program exists to encourage the ongoing development of high quality public library services in Iowa. In Service to Iowa: Public Library Standards is the manual for the State Library of Iowa’s standards program. It was first published in 1985 and was updated in 1989, 1997, 2004, and now in 2010. Iowa’s voluntary public library standards program was established to give public libraries a tool to identify strengths and areas for improvement. It is also used to document the condition of public library service in Iowa, to distribute Direct State Aid funding, and to meet statutory requirements. In 2010, the Iowa Commission of Libraries appointed the Public Library Standards Advisory Task Force to revise In Service to Iowa. The Task Force included members representing libraries from different size categories, the Iowa Commission of Libraries, Library Service Area staff, and State Library staff. All members support and stress the importance of the accreditation process and thank the Iowa public library community for its assistance.

Bond Development in Concrete Overlays, August 1995

Data collection to determine the rate of bond strength development between concrete overlays and existing pavements and the evaluation of nondestructive testing methods for determining concrete strength were the objectives of this study. Maturity meters and pulse velocity meters were employed to determine the rate of flexural strength gain and determine the time for opening of newly constructed pavements to traffic. Maturity measurements appear to provide a less destructive method of testing. Pulse velocity measurements do require care in the preparation of the test wells and operator care in testing. Both devices functioned well under adverse weather and construction conditions and can reduce construction traffic delay decisions. Deflection testing and strain gaging indicate differences in the reaction of the overlay and existing pavement under grouting versus nongrouted sections. Grouting did enhance the rate of bond development with Type I11 cement out performing the Type I1 grout section. Type I11 and Type I1 cement grouts enhanced resistance to cracking in uniformly supported pavements where joints are prepared prior to overlays achieving target flexural strengths. Torsional and direct shear testing provide additional ways of measuring bond development at different cure times. Detailed data analysis will be utilized by TRANSTEC, Inc. to develop a bonded overlay construction guidelines report.

Development of a GPS-Based Sign Inventory Tool for Iowa’s Statewide Management System, May 2011

This report is on state-of-the-art research efforts specific to infrastructure inventory/data collection with sign inventory as a case study. The development of an agency-wide sign inventory is based on feature inventory and location information. Specific to location, a quick and simple location acquisition tool is critical to tying assets to an accurate location-referencing system. This research effort provides a contrast between legacy referencing systems (route and milepost) and global positioning system- (GPS-) based techniques (latitude and longitude) integrated into a geographic information system (GIS) database. A summary comparison of field accuracies using a variety of consumer grade devices is also provided. This research, and the data collection tools developed, are critical in supporting the Iowa Department of Transportation (DOT) Statewide Sign Management System development effort. For the last two years, a Task Force has embarked on a comprehensive effort to develop a sign management system to improve sign quality, as well as to manage all aspects of signage, from request, ordering, fabricating, installing, maintaining, and ultimately removing, and to provide the ability to budget for these key assets on a statewide basis. This effort supported the development of a sign inventory tool and is the beginning of the development of a sign management system to support the Iowa DOT efforts in the consistent, cost effective, and objective decision making process when it comes to signs and their maintenance.

Development of Object-Oriented Design and Specifications for Iowa DOT and Urban Standards: Phase I, TR-487, 2004

Currently, individuals including designers, contractors, and owners learn about the project requirements by studying a combination of paper and electronic copies of the construction documents including the drawings, specifications (standard and supplemental), road and bridge standard drawings, design criteria, contracts, addenda, and change orders. This can be a tedious process since one needs to go back and forth between the various documents (paper or electronic) to obtain information about the entire project. Object-oriented computer-aided design (OO-CAD) is an innovative technology that can bring a change to this process by graphical portrayal of information. OO-CAD allows users to point and click on portions of an object-oriented drawing that are then linked to relevant databases of information (e.g., specifications, procurement status, and shop drawings). The vision of this study is to turn paper-based design standards and construction specifications into an object-oriented design and specification (OODAS) system or a visual electronic reference library (ERL). Individuals can use the system through a handheld wireless book-size laptop that includes all of the necessary software for operating in a 3D environment. All parties involved in transportation projects can access all of the standards and requirements simultaneously using a 3D graphical interface. By using this system, users will have all of the design elements and all of the specifications readily available without concerns of omissions. A prototype object-oriented model was created and demonstrated to potential users representing counties, cities, and the state. Findings suggest that a system like this could improve productivity to find information by as much as 75% and provide a greater sense of confidence that all relevant information had been identified. It was also apparent that this system would be used by more people in construction than in design. There was also concern related to the cost to develop and maintain the complete system. The future direction should focus on a project-based system that can help the contractors and DOT inspectors find information (e.g., road standards, specifications, instructional memorandums) more rapidly as it pertains to a specific project.