Field Measurements of Plow Loads During Ice Removal Operations, HR-334, 1993

One of the more severe winter hazards is ice or compacted snow on roadways. While three methods are typically used to combat ice (salting, sanding and scraping), relatively little effort has been applied to improve methods of scraping ice from roads. In this project, a new test facility has been developed, comprising a truck with an underbody blade, which has been instrumented such that the forces to scrape ice from a pavement can be measured. A test site has been used, which is not accessible to the public, and ice covers have been sprayed onto the pavement and subsequently scraped from it, while the scraping loads have been recorded. Three different cutting edges have been tested for their ice scraping efficiency. Two of the blades are standard (one with a carbide insert, the other without) while the third blade was designed under the SHRP H-204A project. Results from the tests allowed two parameters to be identified. The first is the scraping efficiency which is the ratio of vertical to horizontal force. The lower this ratio, the more efficiently ice is being removed. The second parameter is the scraping effectiveness, which is related (in some as yet unspecified manner) to the horizontal load. The higher the horizontal load, the more ice is being scraped. The ideal case is thus to have as high a horizontal load as possible, combined with the lowest possible vertical load. Results indicate that the SHRP blade removed ice more effectively than the other two blades under equivalent conditions, and furthermore, did so with greater efficiency and thus more control. Furthermore, blade angles close to 0 deg provide for the most efficient scraping for all three blades. The study has shown that field testing of plow blades is possible in controlled situations, and that blades can be evaluated using this system. The system is available for further tests as are deemed appropriate.

Iowa Gender-Specific Services Task Force

An Iowa Commission on the Status of Women Gender Task Force.

The Governor’s Task Force on African-Americans in Prison, 2001

Report produced by the Department of Corrections

Field Evaluation of Elliptical Fiber Reinforced Polymer Dowel Performance, June 2005

Fiber reinforced polymer (FRP) composite materials are making an entry into the construction market in both buildings and pavements. The application to pavements so far has come in the form of joint reinforcement (dowels and tie bars). FRP resistance to salt corrosion in dowels has made it an alternative to standard epoxy-coated steel dowels for pavements. Iowa State University has completed a large amount of laboratory research to determine the diameter, spacing, and durability of FRP dowels. This report documents the performance of elliptical FRP dowels installed in a field situation. Ten joints were monitored in three consecutive test sections, for each of three dowel spacings (10, 12, and 15 inches) including one instrumented dowel in each test section. The modulus of dowel bar support was determined using falling weight deflectometer (FWD) testing and a loaded crawl truck. FWD testing was also used to determine load transfer efficiency across the joint. The long-term performance and durability of the concrete was also evaluated by monitoring faulting and joint opening measurements and performing visual distress surveys at each joint. This report also contains similar information for standard round, medium elliptical, and heavy elliptical steel dowels in a portion of the same highway. In addition, this report provides a summary of theoretical analysis used to evaluate joint differential deflection for the dowels.

Using the Air Void Anal Analyzer for Real-Time Quality Control Adjustments in the Field, November 2004

The air void analyzer (AVA) with its independent isolation base can be used to accurately evaluate the air void system—including volume of entrained air, size of air voids, and distribution of air voids—of fresh portland cement concrete (PCC) on the jobsite. With this information, quality control adjustments in concrete batching can be made in real time to improve the air void system and thus increase freeze-thaw durability. This technology offers many advantages over current practices for evaluating air in concrete.

Field Evaluation of Elliptical Fiber Reinforced Polymer Dowel Performance, June 2003

Fiber composite materials (FRP) are making an entry into the construction market in both buildings and pavements. The application to pavements comes in the form of joint reinforcement (dowels and tie bars) to date. FRP resistance to salt corrosion in dowels has made it an alternative to standard epoxy coated dowels for pavements. Iowa State University has completed a large amount of laboratory research into the determination of diameter, spacing, and durability of FRP dowels. This report documents the installation of a series of FRP elliptical-shaped dowel joints (including instrumented units) in a field situation and the beginning of a two-year study to compare laboratory results to in-service pavements. Ten joints were constructed for each of three dowel spacings of 10, 12, and 15 inches ( 254, 305, and 381 mm) with one instrumented joint in each test section. The instrumented bars will be load tested with a loaded truck and FWD testing.

Report of the Governor's Task Force on the Overepresentation of African-Americans in Prison, 2001

In 1999, 24 percent of Iowa prison beds were occupied by African-American inmates, despite the fact that African-Americans comprised just over 2 percent of the state’s total population. That year the median incarceration rate for African-Americans in Iowa was 2,950 per every 100,000 people (or approximately 3.0 percent of the state’s African-American population). The median incarceration rate for Caucasians in Iowa was 188 per every 100,000 people (or approximately 0.2 percent of the state’s Caucasian population). Seven percent of all African-Americans in this state were under some form of criminal justice supervision in 1999. 1999 statistics also reveal that there were nearly twice as many African-Americans under criminal justice supervision in Iowa than atte nded one of the state’s post-secondary institutions.

Library Services System for Iowa Library Services Task Force Report, December 2000

As a guide for librarians, library policy makers and the local level, community leaders, local and state policy makers, and library customers across the state, these recommendations create a vision of libraries as friendly, welcoming places where Iowans can access inform ation in person or on-lin e, ob tain, an d use ideas and truste d info rmatio n tha t will enhance their quality of life. This report specifies the steps to achieving this vision and creates an environment of opportunity to m ove s teadily toward the new system.

Iowa Sex Offender Treatment and Supervision Task Force Report to the Iowa General Assembly, January 15, 2006

Over the last several years, lawmakers have been responding to several highly publicized child abduction, assault and murder cases. While such cases remain rare in Iowa, the public debates they have generated are having far-reaching effects. Policy makers are responsible for controlling the nature of such effects. Challenges they face stem from the need to avoid primarily politically-motivated responses and the desire to make informed decisions that recognize both the strengths and the limitations of the criminal justice system as a vehicle for promoting safe and healthy families and communities. Consensus was reached by the Task Force at its first meeting that one of its standing goals is to provide nonpartisan guidance to help avoid or fix problematic sex offense policies and practices. Setting this goal was a response to the concern over what can result from elected officials’ efforts to respond to the types of sex offender-related concerns that can easily become emotionally laden and politically charged due to the universally held abhorrence of sex crimes against children. The meetings of the Task Force and the various work groups it has formed have included some spirited and perhaps emotionally charged discussions, despite the above-stated ground rule. However, as is described in the report, the Task Force’s first set of recommendations and plans for further study were approved through consensus. It is hoped that in upcoming legislative deliberations, it will be remembered that the non-legislative members of the Task Force all agreed on the recommendations contained in this report. The topics discussed in this first report from the Task Force are limited to the study issues specifically named in H.F. 619, the Task Force’s enabling legislation. However, other topics of concern were discussed by the Task Force because of their immediacy or because of their possible relationships with one or more of the Task Force’s mandated study issues. For example, it has been reported by some probation/parole officers and others that the 2000 feet rule has had a negative influence on treatment participation and supervision compliance. While such concerns were noted, the Task Force did not take it upon itself to investigate them at this time and thus broaden the agenda it was given by the General Assembly last session. As a result, the recently reinstated 2000 feet rule, the new cohabitation/child endangerment law and other issues of interest to Task Force members but not within the scope of their charge are not discussed in the body of this report. An issue of perhaps the greatest interest to most Task Force members that was not a part of their charge was a belief in the benefit of viewing Iowa’s efforts to protect children from sex crimes with as comprehensive a platform as possible. It has been suggested that much more can be done to prevent child-victim sex crimes than would be accomplished by only concentrating on what to do with offenders after a crime has occurred. To prevent child victimization, H.F. 619 policy provisions rely largely on incapacitation and future deterrent effects of increased penalties, more restrictive supervision practices and greater public awareness of the risk presented by a segment of Iowa’s known sex offenders. For some offenders, these policies will no doubt prevent future sex crimes against children, and the Task Force has begun long-term studies to look for the desired results and for ways to improve such results through better supervision tools and more effective offender treatment. Unfortunately, much of the effects from the new policies may primarily influence persons who have already committed sex offenses against minors and who have already been caught doing so. Task Force members discussed the need for a range of preventive efforts and a need to think about sex crimes against children from other than just a “reaction- to-the-offender” perspective. While this topic is not addressed in the report that follows, it was suggested that some of the Task Force’s discussions could be briefly shared through these opening comments. Along with incapacitation and deterrence, comprehensive approaches to the prevention of child-victim sex crimes would also involve making sure parents have the tools they need to detect signs of adults with sex behavior problems, to help teach their children about warning signs and to find the support they need for healthy parenting. School, faithbased and other community organizations might benefit from stronger supports and better tools they can use to more effectively promote positive youth development and the learning of respect for others, respect for boundaries and healthy relationships. All of us who have children, or who live in communities where there are children, need to understand the limitations of our justice system and the importance of our own ability to play a role in preventing sexual abuse and protecting children from sex offenders, which are often the child’s own family members. Over 1,000 incidences of child sexual abuse are confirmed or founded each year in Iowa, and most such acts take place in the child’s home or the residence of the caretaker of the child. Efforts to prevent child sexual abuse and to provide for early interventions with children and families at risk could be strategically examined and strengthened. The Sex Offender Treatment and Supervision Task Force was established to provide assistance to the General Assembly. It will respond to legislative direction for adjusting its future plans as laid out in this report. Its plans could be adjusted to broaden or narrow its scope or to assign different priority levels of effort to its current areas of study. Also, further Task Force considerations of the recommendations it has already submitted could be called for. In the meantime, it is hoped that the information and recommendations submitted through this report prove helpful.

Field Experiments of Current Concrete Pavement Surface Characteristics Practices: Iowa Data Collection and Analysis, December 2005

One of the most important issues in portland cement concrete pavement research today is surface characteristics. The issue is one of balancing surface texture construction with the need for durability, skid resistance, and noise reduction. The National Concrete Pavement Technology Center at Iowa State University, in conjunction with the Federal Highway Administration, American Concrete Pavement Association, International Grinding and Grooving Association, Iowa Highway Research Board, and other states, have entered into a three-part National Surface Characteristics Program to resolve the balancing problem. As a portion of Part 2, this report documents the construction of 18 separate pavement surfaces for use in the first level of testing for the national project. It identifies the testing to be done and the limitations observed in the construction process. The results of the actual tests will be included in the subsequent national study reports.

Field investigation of hydraulic structures facilitating fish abundance & passage through bridges in western Iowa streams, March 2006

The overarching goal of the proposed research was to evaluate the hydraulic performance of twenty two (22) fish-passage structures located in close proximity to bridges in western Iowa and within the HCA (Hungry Canyon Alliance) territory. Such structures include riprap weirs, fish ladders and grouted ripraps. The hydraulic performance of the aforementioned structures was evaluated via detailed field tests for a range of flow conditions relevant to fish migration through bridge waterways in different streams in western Iowa.

Global Prospects for Dairy in Argentina and Chile: Evidence from Field Visits and Model Simulations, August 2006

We assess the international competitiveness of the dairy industries in Argentina and Chile, combining recent market intelligence gathered from field visits with quantitative simulations of global policy reform scenarios. Both countries exhibit strong potential for export growth but face significant internal and external barriers to expanding their dairy industries. Global policy reforms would resolve some of the international obstacles to their expansion. Argentina has great potential, but it is handicapped by its current macroeconomic policies, trade policy distortions, and the uncertainty associated with policy implementation. Chile is more limited in terms of natural capacity for expansion, but it has a positive trade and investment environment.

Concrete Paving Training & Field Reference for Preventing Common Problems, August 2006

To ensure that high-quality materials are used in concrete mixing, all materials delivered to the site should be inspected to ensure that they meet specification requirements. All materials should be delivered with the proper certifications, invoices, or bill of lading. These records should indicate when the shipment arrived, the amount and identification of material delivered, and the laboratory report certification number, invoice number, and ticket number.

Report of Task Force into Critical Incidents within the Iowa Prison System, 2004

Report #02-04 Concerns about the death of two Iowa inmates at the Anamosa State Penitentiary, asked the Ombudsman Office to review the incidents and provide an assessment of each incident. The Governor also asked the Ombudsman Office to propose a set of recommendations for improving inmate and staff safety within Anamosa State Penitentiary.

Developing a Simple and Rapid Test for Monitoring the Heat Evolution of Concrete Mixtures for Both Laboratory and Field Applications, January 2006

Various test methods exist for measuring heat of cement hydration; however, most current methods require expensive equipment, complex testing procedures, and/or extensive time, thus not being suitable for field application. The objectives of this research are to identify, develop, and evaluate a standard test procedure for characterization and quality control of pavement concrete mixtures using a calorimetry technique. This research project has three phases. Phase I was designed to identify the user needs, including performance requirements and precision and bias limits, and to synthesize existing test methods for monitoring the heat of hydration, including device types, configurations, test procedures, measurements, advantages, disadvantages, applications, and accuracy. Phase II was designed to conduct experimental work to evaluate the calorimetry equipment recommended from the Phase I study and to develop a standard test procedure for using the equipment and interpreting the test results. Phase II also includes the development of models and computer programs for prediction of concrete pavement performance based on the characteristics of heat evolution curves. Phase III was designed to study for further development of a much simpler, inexpensive calorimeter for field concrete. In this report, the results from the Phase I study are presented, the plan for the Phase II study is described, and the recommendations for Phase III study are outlined. Phase I has been completed through three major activities: (1) collecting input and advice from the members of the project Technical Working Group (TWG), (2) conducting a literature survey, and (3) performing trials at the CP Tech Center’s research lab. The research results indicate that in addition to predicting maturity/strength, concrete heat evolution test results can also be used for (1) forecasting concrete setting time, (2) specifying curing period, (3) estimating risk of thermal cracking, (4) assessing pavement sawing/finishing time, (5) characterizing cement features, (6) identifying incompatibility of cementitious materials, (7) verifying concrete mix proportions, and (8) selecting materials and/or mix designs for given environmental conditions. Besides concrete materials and mix proportions, the configuration of the calorimeter device, sample size, mixing procedure, and testing environment (temperature) also have significant influences on features of concrete heat evolution process. The research team has found that although various calorimeter tests have been conducted for assorted purposes and the potential uses of calorimeter tests are clear, there is no consensus on how to utilize the heat evolution curves to characterize concrete materials and how to effectively relate the characteristics of heat evolution curves to concrete pavement performance. The goal of the Phase II study is to close these gaps.