Iowa Plan for Brain Injury, October 2002 – September 2005

Cutting edge emergency services now allow many Iowans to survive a traumatic brain injury (TBI) that would have caused death just a decade ago. The discharge planners at medical centers struggle with dramatically shorter acute inpatient stays, increased caseloads, and over 2000 brain injury admissions each year. Historically, following discharge from the hospital, Iowans with brain injury and their families have been left with little understanding of brain injury, its long-term effects, or where to go for services and supports.

LSTA Five Year Plan, 1998-2002, 2002

The LSTA goals for Iowa, FY98-FY02, are as follows: 1. Provide all Iowans with expanded access to information and materials through the State of Iowa Libraries Online (SILO) network. 2. Improve library service to Iowans through knowledgeable, well-trained staff and wellinformed public library trustees and library users. 3. Meet Iowans’ increasing demands for information and library services by identifying and encouraging resource sharing and partnerships. 4. Provide state level leadership and services to accomplish the LSTA Five-Year Plan. The primary objectives of this evaluation are to provide: $ An assessment of the overall impact of Iowa’s LSTA funding and success in achieving the goals identified in the state’s five-year plan. $ An in-depth analysis of two specific goals from the plan: providing Iowans with expanded access to information and materials through the State of Iowa Libraries Online (SILO) network; and improving library service to Iowans through knowledgeable, well-trained staff and well-informed public library trustees and library users. LSTA built on accomplishments made possible with the federal HEA II-B grant awarded to the State Library in 1995. This grant led the way in bringing technology to Iowa libraries by creating an electronic library network for resource sharing. SILO (State of Iowa Libraries Online) became fully functional in 1997. The State Library continued funding SILO with LSTA money when the grant ended. This funding supports the SILO infrastructure, providing equitable access to information through cutting edge technology to Iowans in both small and large, rural and urban, communities. Access to electronic material and information has encouraged public libraries to increase the number of computers and public access to the Internet. LSTA funding was used to increase training opportunities for library staff and trustees. Many programs, such as librarian certification, were strengthened by an increase in continuing education opportunities.

LSTA Five Year Plan, 1998-2002, 2002

The LSTA goals for Iowa, FY98-FY02, are as follows: 1. Provide all Iowans with expanded access to information and materials through the State of Iowa Libraries Online (SILO) network. 2. Improve library service to Iowans through knowledgeable, well-trained staff and wellinformed public library trustees and library users. 3. Meet Iowans’ increasing demands for information and library services by identifying and encouraging resource sharing and partnerships. 4. Provide state level leadership and services to accomplish the LSTA Five-Year Plan. The primary objectives of this evaluation are to provide: $ An assessment of the overall impact of Iowa’s LSTA funding and success in achieving the goals identified in the state’s five-year plan. $ An in-depth analysis of two specific goals from the plan: providing Iowans with expanded access to information and materials through the State of Iowa Libraries Online (SILO) network; and improving library service to Iowans through knowledgeable, well-trained staff and well-informed public library trustees and library users. LSTA built on accomplishments made possible with the federal HEA II-B grant awarded to the State Library in 1995. This grant led the way in bringing technology to Iowa libraries by creating an electronic library network for resource sharing. SILO (State of Iowa Libraries Online) became fully functional in 1997. The State Library continued funding SILO with LSTA money when the grant ended. This funding supports the SILO infrastructure, providing equitable access to information through cutting edge technology to Iowans in both small and large, rural and urban, communities. Access to electronic material and information has encouraged public libraries to increase the number of computers and public access to the Internet. LSTA funding was used to increase training opportunities for library staff and trustees. Many programs, such as librarian certification, were strengthened by an increase in continuing education opportunities.

LSTA Five Year Plan Evaluation, 1998-2002, 2002

The LSTA goals for Iowa, FY98-FY02, are as follows: 1. Provide all Iowans with expanded access to information and materials through the State of Iowa Libraries Online (SILO) network. 2. Improve library service to Iowans through knowledgeable, well-trained staff and wellinformed public library trustees and library users. 3. Meet Iowans’ increasing demands for information and library services by identifying and encouraging resource sharing and partnerships. 4. Provide state level leadership and services to accomplish the LSTA Five-Year Plan. The primary objectives of this evaluation are to provide: $ An assessment of the overall impact of Iowa’s LSTA funding and success in achieving the goals identified in the state’s five-year plan. $ An in-depth analysis of two specific goals from the plan: providing Iowans with expanded access to information and materials through the State of Iowa Libraries Online (SILO) network; and improving library service to Iowans through knowledgeable, well-trained staff and well-informed public library trustees and library users. LSTA built on accomplishments made possible with the federal HEA II-B grant awarded to the State Library in 1995. This grant led the way in bringing technology to Iowa libraries by creating an electronic library network for resource sharing. SILO (State of Iowa Libraries Online) became fully functional in 1997. The State Library continued funding SILO with LSTA money when the grant ended. This funding supports the SILO infrastructure, providing equitable access to information through cutting edge technology to Iowans in both small and large, rural and urban, communities. Access to electronic material and information has encouraged public libraries to increase the number of computers and public access to the Internet. LSTA funding was used to increase training opportunities for library staff and trustees. Many programs, such as librarian certification, were strengthened by an increase in continuing education opportunities.

Development of a Model for the Ice Scraping Process, October 1996

A laboratory study has been conducted with two aims in mind. The first goal was to develop a description of how a cutting edge scrapes ice from the road surface. The second goal was to investigate the extent, if any, to which serrated blades were better than un-serrated or "classical" blades at ice removal. The tests were conducted in the Ice Research Laboratory at the Iowa Institute of Hydraulic Research of the University of Iowa. A specialized testing machine, with a hydraulic ram capable of attaining scraping velocities of up to 30 m.p.h. was used in the testing. In order to determine the ice scraping process, the effects of scraping velocity, ice thickness, and blade geometry on the ice scraping forces were determined. Higher ice thickness lead to greater ice chipping (as opposed to pulverization at lower thicknesses) and thus lower loads. Behavior was observed at higher velocities. The study of blade geometry included the effect of rake angle, clearance angle, and flat width. The latter were found to be particularly important in developing a clear picture of the scraping process. As clearance angle decreases and flat width increases, the scraping loads show a marked increase, due to the need to re-compress pulverized ice fragments. The effect of serrations was to decrease the scraping forces. However, for the coarsest serrated blades (with the widest teeth and gaps) the quantity of ice removed was significantly less than for a classical blade. Finer serrations appear to be able to match the ice removal of classical blades at lower scraping loads. Thus, one of the recommendations of this study is to examine the use of serrated blades in the field. Preliminary work (by Nixon and Potter, 1996) suggests such work will be fruitful. A second and perhaps more challenging result of the study is that chipping of ice is more preferable to pulverization of the ice. How such chipping can be forced to occur is at present an open question.

Development of a Model for the Ice Scraping Process Iowa Department of Transportation Project HR 361 Final Report, October 1996

A laboratory study has been conducted with two aims in mind. The first goal was to develop a description of how a cutting edge scrapes ice from the road surface. The second goal was to investigate the extent, if any, to which serrated blades were better than un-serrated or "classical" blades at ice removal. The tests were conducted in the Ice Research Laboratory at the Iowa Institute of Hydraulic Research of the University of Iowa. A specialized testing machine, with a hydraulic ram capable of attaining scraping velocities of up to 30 m.p.h. was used in the testing. In order to determine the ice scraping process, the effects of scraping velocity, ice thickness, and blade geometry on the ice scraping forces were determined. Higher ice thickness lead to greater ice chipping (as opposed to pulverization at lower thicknesses) and thus lower loads. S~milabr ehavior was observed at higher velocities. The study of blade geometry included the effect of rake angle, clearance angle, and flat width. The latter were found to be particularly important in developing a clear picture of the scraping process. As clearance angle decreases and flat width increases, the scraping loads show a marked increase, due to the need to re-compress pulverized ice fragments. The effect of serrations was to decrease the scraping forces. However, for the coarsest serrated blades (with the widest teeth and gaps) the quantity of ice removed was significantly less than for a classical blade. Finer serrations appear to be able to match the ice removal of classical blades at lower scraping loads. Thus, one of the recommendations of this study is to examine the use of serrated blades in the field. Preliminary work (by Nixon and Potter, 1996) suggests such work will be fruitful. A second and perhaps more challenging result of the study is that chipping of ice is more preferable to pulverization of the ice. How such chipping can be forced to occur is at present an open question.

Development of a Computer Controlled Underbody Plow: TR412, Final Report, January 2006

Underbody plows can be very useful tools in winter maintenance, especially when compacted snow or hard ice must be removed from the roadway. By the application of significant down-force, and the use of an appropriate cutting edge angle, compacted snow and ice can be removed very effectively by such plows, with much greater efficiency than any other tool under those circumstances. However, the successful operation of an underbody plow requires considerable skill. If too little down pressure is applied to the plow, then it will not cut the ice or compacted snow. However, if too much force is applied, then either the cutting edge may gouge the road surface, causing significant damage often to both the road surface and the plow, or the plow may ride up on the cutting edge so that it is no longer controllable by the operator. Spinning of the truck in such situations is easily accomplished. Further, excessive down force will result in rapid wear of the cutting edge. Given this need for a high level of operator skill, the operation of an underbody plow is a candidate for automation. In order to successfully automate the operation of an underbody plow, a control system must be developed that follows a set of rules that represent appropriate operation of such a plow. These rules have been developed, based upon earlier work in which operational underbody plows were instrumented to determine the loading upon them (both vertical and horizontal) and the angle at which the blade was operating.These rules have been successfully coded into two different computer programs, both using the MatLab® software. In the first program, various load and angle inputs are analyzed to determine when, whether, and how they violate the rules of operation. This program is essentially deterministic in nature. In the second program, the Simulink® package in the MatLab® software system was used to implement these rules using fuzzy logic. Fuzzy logic essentially replaces a fixed and constant rule with one that varies in such a way as to improve operational control. The development of the fuzzy logic in this simulation was achieved simply by using appropriate routines in the computer software, rather than being developed directly. The results of the computer testing and simulation indicate that a fully automated, computer controlled underbody plow is indeed possible. The issue of whether the next steps toward full automation should be taken (and by whom) has also been considered, and the possibility of some sort of joint venture between a Department of Transportation and a vendor has been suggested.

Measurement of Ice Scraping Forces on Snow-Plow Underbody Blades, HR-372, 1997

In this study, several new cutting edges for removal of ice from the roadway were tested in a series of closed road tests. These new cutting edges consisted of a variety of serrated shapes. The study also included measurement of ice scraping forces by in-service trucks. These trucks were instrumented in a similar manner as the truck used in the closed-road tests. Results from the closed-road and in-service tests were analyzed by two parameters. The first parameter is the scraping effectiveness, which is defined as the average horizontal force experienced by a cutting edge. The amount of ice scraped from the roadway is directly proportional to the magnitude of the scraping effectiveness. Thus an increase in scraping effectiveness indicates an increase in the amount of ice being scraped from the roadway. The second parameter is force angle, which is defined as tan to the -1 power [vertical force/horizontal force]. A combination of a minimal force angle and a maximized scraping effectiveness represents a case in which the maximal amount of ice is being removed from the pavement without an exceptionally large vertical force. Results indicate that each cutting edge produced a maximal scraping effectiveness with a testing configuration of a 15 deg blade angle and a 23,000 lb. download force. Results also indicate that each cutting edge produced a minimal force angle with a testing configuration of a 15 deg blade angle and a 10,000 lb. download force. Results from the in-service trucks produced similar data and also similar trends within the data when compared to the results of the closed-road tests. This result is most important, as it suggests that the closed-road tests do provide an accurate measure of ice scraping forces for a given blade and configuration of that blade. Thus if the closed-road tests indicate that certain blades perform well, there is now excellent reason to conduct full scale tests of such blades.

Iowa Law Enforcement Academy Annual Report FY2012

Iowa Law Enforcement Academy provided 383 training opportunities for law enforcement, jailers, and telecommunicators for a total of 3584 individuals receiving training. The Academy remains committed to bringing cutting edge programming to law enforcement, jailers, and telecommunicators across Iowa, as evidenced by partnerships with the Federal Law Enforcement Training Center, the International Association of Chiefs of Police, the Secret Service, the Midwest Counterdrug Training Center, Northwestern University’s Center for Public Safety, and many others. The Academy is looking forward to growing its presence within the law enforcement community as the “go to” resource by also serving as a bulletin board for training around the state.

Iowa Law Enforcement Academy Annual Report FY2013

Iowa Law Enforcement Academy provided 383 training opportunities for law enforcement, jailers, and telecommunicators for a total of 3584 individuals receiving training. The Academy remains committed to bringing cutting edge programming to law enforcement, jailers, and telecommunicators across Iowa, as evidenced by partnerships with the Federal Law Enforcement Training Center, the International Association of Chiefs of Police, the Secret Service, the Midwest Counterdrug Training Center, Northwestern University’s Center for Public Safety, and many others. The Academy is looking forward to growing its presence within the law enforcement community as the “go to” resource by also serving as a bulletin board for training around the state.

Iowa Law Enforcement Academy Annual Report FY2014

Iowa Law Enforcement Academy provided 383 training opportunities for law enforcement, jailers, and telecommunicators for a total of 3584 individuals receiving training. The Academy remains committed to bringing cutting edge programming to law enforcement, jailers, and telecommunicators across Iowa, as evidenced by partnerships with the Federal Law Enforcement Training Center, the International Association of Chiefs of Police, the Secret Service, the Midwest Counterdrug Training Center, Northwestern University’s Center for Public Safety, and many others. The Academy is looking forward to growing its presence within the law enforcement community as the “go to” resource by also serving as a bulletin board for training around the state.

Safety Impacts of Pavement Edge Drop-offs, 2006

A vehicle may leave its travel lane for a number of reasons, such as driver error, poor surface conditions, or avoidance of a collision with another vehicle in the travel lane. When a vehicle leaves the travel lane, pavement edge drop-off poses a potential safety hazard because significant vertical differences between surfaces can affect vehicle stability and reduce a driver’s ability to handle the vehicle. Numerous controlled studies have tested driver response to encountering drop-offs under various conditions, including different speeds, vehicle types, drop-off height and shape, and tire scrubbing versus non-scrubbing conditions. The studies evaluated the drivers’ ability to return to and recover within their own travel lane after leaving the roadway and encountering a drop-off. Many of these studies, however, have used professional drivers as test subjects, so results may not always apply to the population of average drivers. Furthermore, test subjects are always briefed on what generally is to be expected and how to respond; thus, the sense of surprise that a truly naïve driver may experience upon realizing that one or two of his or her tires have just dropped off the edge of the pavement, is very likely diminished. Additionally, the studies were carried out under controlled conditions. The actual impact of pavement edge drop-off on drivers’ ability to recover safely once they leave the roadway, however, is not well understood under actual driving conditions. Additionally, little information is available that quantifies the number or severity of crashes that occur where pavement edge drop-off may have been a contributing factor. Without sufficient information about the frequency of edge drop-off-related crashes, agencies are not fully able to measure the economic benefits of investment decisions, evaluate the effectiveness of different treatments to mitigate edge drop-off, or focus maintenance resources. To address these issues, this report details research to quantify the contribution of pavement edge drop-off to crash frequency and severity. Additionally, the study evaluated federal and state guidance in sampling and addressing pavement edge drop-off and quantified the extent of pavement edge drop-off in two states. This study focused on rural two-lane paved roadways with unpaved shoulders, since they are often high speed facilities (55+ mph), have varying levels of maintenance, and are likely to be characterized by adverse roadway conditions such as narrow lanes or no shoulders.

Automation of DEM Cutting for Hydrologic/Hydraulic Modeling, TR-631, 2015

Hydrologic analysis is a critical part of transportation design because it helps ensure that hydraulic structures are able to accommodate the flow regimes they are likely to see. This analysis is currently conducted using computer simulations of water flow patterns, and continuing developments in elevation survey techniques result in higher and higher resolution surveys. Current survey techniques now resolve many natural and anthropogenic features that were not practical to map and, thus, require new methods for dealing with depressions and flow discontinuities. A method for depressional analysis is proposed that uses the fact that most anthropogenically constructed embankments are roughly more symmetrical with greater slopes than natural depressions. An enforcement method for draining depressions is then analyzed on those depressions that should be drained. This procedure has been evaluated on a small watershed in central Iowa, Walnut Creek of the South Skunk River, HUC12 # 070801050901, and was found to accurately identify 88 of 92 drained depressions and place enforcements within two pixels, although the method often tries to drain prairie pothole depressions that are bisected by anthropogenic features.

Stabilization Procedures to Mitigate Edge Rutting for Granular Shoulders - Phase II, TR-591, 2011

A multifaceted investigation was undertaken to develop recommendations for methods to stabilize granular road shoulders with the goal of mitigating edge ruts. Included was reconnaissance of problematic shoulder locations, a laboratory study to develop a method to test for changes in granular material stability when stabilizing agents are used, and the construction of three sets of test sections under traffic at locations with problematic granular shoulders. Full results of this investigation are included in this report and its appendices. This report also presents conclusions and recommendations based on the study results.

Comparison of Setting Time Measured Using Ultrasonic Wave Propagation with Saw-Cutting Times on Pavements, TR-675, 2015

At present, there is little fundamental guidance available to assist contractors in choosing when to schedule saw cuts on joints. To conduct pavement finishing and sawing activities effectively, however, contractors need to know when a concrete mixture is going to reach initial set, or when the sawing window will open. Previous research investigated the use of the ultrasonic pulse velocity (UPV) method to predict the saw-cutting window for early entry sawing. The results indicated that the method has the potential to provide effective guidance to contractors as to when to conduct early entry sawing. The aim of this project was to conduct similar work to observe the correlation between initial setting and conventional sawing time. Sixteen construction sites were visited in Minnesota and Missouri over a two-year period. At each site, initial set was determined using a p-wave propagation technique with a commercial device. Calorimetric data were collected using a commercial semi-adiabatic device at a majority of the sites. Concrete samples were collected in front of the paver and tested using both methods with equipment that was set up next to the pavement during paving. The data collected revealed that the UPV method looks promising for early entry and conventional sawing in the field, both early entry and conventional sawing times can be predicted for the range of mixtures tested.