"Working Alliance" Works Best, Data Download, Iowa Department of Corrections, March 2011

Within the last few years correctional research has clearly shown that the working alliance or rapport between correctional officer/staff member and offender is a critical component in reducing recidivism. Some research even attributes up to 40% of offender change or success to this relationship.

Field Evaluation of Electro-Reflective Measuring Apparatus (ERMA), MLR-81-01, 1981

The Electro-Reflective Measuring Apparatus (ERMA) was developed by the Minnesota Department of Highways in 1974 to measure the retro-reflective characteristics of pavement marking materials. Minnesota researchers recommended that due to the increased cost of pavement marking materials and reduced availability of these materials, ERMA can and should be used as a maintenance management tool to determine when painting is necessary rather than according to a fixed time schedule. The Iowa DOT Office of Materials built an ERMA device patterned after Minnesota's design in 1976. Subsequent efforts to calibrate and correlate this ERMA device to District Paint Foremen ratings proved unsuccessful, and ERMA modification or abandonment was recommended in 1979. Lyman Moothart, Materials Lab. Tech. 4, modified the ERMA device in 1980 and correlation attempts to District Paint Foremen ratings conducted in November 1980 have been moderately successful. A Paint/No Paint ERMA value has been established which will identify about 90% of the painting needs but will also include about 40% of the marking lines not needing repainting. The Office of Maintenance should establish a trial ERMA program to study the accuracy and potential cost savings of using ERMA to identify pavement marking needs.

Evaluation of the Baladi Indirect Tensile Apparatus, MLR-89-08, 1990

Dr. Gilbert Y. Baladi of Michigan State University has developed a new device intended for reliable determination of asphalt concrete mechanical properties such as Poisson's ratio, resilient modulus, and indirect tensile strength. The device is the result of an effort to improve upon procedures and equipment currently available for evaluation of mechanical properties. A duplicate of this device was fabricated in the Iowa Department of Transportation, Materials Lab Machine Shop in 1989. This report details the results of an evaluation of the effectiveness of the device in testing Marshall specimens for indirect tensile strength as compared to results obtained with standard equipment described in AASHTO T-283. Conclusions of the report are: l. Results obtained with the Baladi device average 6 to 8 percent higher than those obtained with the standard device. 2. The standard device exhibited a slightly greater degree of precision than did the Baladi device. 3. The Baladi device is easier and quicker to use than the standard apparatus. 4. It may be possible to estimate indirect tensile strength from the stability/flow ratio by dividing by factors of 1.8 and 1.5 for 50 blow and 75 blow mixes respectively.

Cooperatives and Contracting in Agriculture: The Case of West Liberty Foods, October 2005

The West Liberty Foods turkey cooperative was formed in 1996 to purchase the assets and assume operations of Louis Rich Foods (an investor-owned processing rm), which, at the time, announced the imminent shutdown of its West Liberty, Iowa, processing facility. We study the creation and performance of this �new generation� cooperative using eld interviews with grower members and company management. We describe changes, before and after the buyout, in the contractual apparatus used for procuring live turkeys, and in the communication requirements, work expectations, and nancial positions of growers. During the private ownership period, most of the inputs (except labor and facilities) were provided by the rm; there was substantial supervision of the growers' actions; growers faced little price and production risk; and growers' equity was due largely to ownership of land and other farm assets. Our interviews reveal that, after cooperative formation, growers were exposed to considerable additional risk; monitoring of growers by the rm was less intensive; grower time and effort commitments to turkey production increased substantially; and a signicant fraction of rm (cooperative) equity came from growers' willingness to leverage their farm and personal assets (and hence indirectly their existing relationships with local lenders). We argue that some of these changes are consistent with a nancial contract where asset pledging and its corollary risk generate higher work effort by growers and a reduction in agency rents. These economies likely compensate for an organizational deadweight loss traditionally associated with cooperative governance.

Field investigation of hydraulic structures facilitating fish abundance & passage through bridges in western Iowa streams, March 2006

The overarching goal of the proposed research was to evaluate the hydraulic performance of twenty two (22) fish-passage structures located in close proximity to bridges in western Iowa and within the HCA (Hungry Canyon Alliance) territory. Such structures include riprap weirs, fish ladders and grouted ripraps. The hydraulic performance of the aforementioned structures was evaluated via detailed field tests for a range of flow conditions relevant to fish migration through bridge waterways in different streams in western Iowa.

Audit report on the Iowa County Treasurers Egovernment Alliance (the Alliance) for the period from October 1, 2006 (inception) through June 30, 2007

Audit report on the Iowa County Treasurers Egovernment Alliance (the Alliance) for the period from October 1, 2006 (inception) through June 30, 2007

Audit report on the Iowa County Treasurers Egovernment Alliance for the year ended June 30, 2008

Audit report on the Iowa County Treasurers Egovernment Alliance for the year ended June 30, 2008

Audit report on the Iowa County Treasurers Egovernment Alliance for the year ended June 30, 2009

Audit report on the Iowa County Treasurers Egovernment Alliance for the year ended June 30, 2009

Report to the Governor and General Assembly on the Status of Out-of School Arts Programming for Youth, December 2006

In the 2006 Iowa General Assembly, House File 2797 called for a study on the status of afterschool arts programs and appropriated $5,000 for the study. In accordance with the legislation, the Iowa Arts Council, who received the charge, contracted with the Iowa Afterschool Alliance to form a Resource Group of out-of-school arts providers and experts to develop and oversee the study, review its results, and make recommendations for the expansion of arts programs that operate outside the normal school day. As a part of its charge in HF 2797, the Iowa Arts Council also documented a sampling of out-of-school arts programs statewide. Five are featured in this report.

Audit report on the Iowa County Treasurers Egovernment Alliance for the year ended June 30, 2010

Audit report on the Iowa County Treasurers Egovernment Alliance for the year ended June 30, 2010

Audit report on the Iowa County Treasurers Egovernment Alliance for the year ended June 30, 2011

Audit report on the Iowa County Treasurers Egovernment Alliance for the year ended June 30, 2011

Audit report on the Iowa County Treasurers Egovernment Alliance for the year ended June 30, 2012

Audit report on the Iowa County Treasurers Egovernment Alliance for the year ended June 30, 2012

Audit report on the Iowa County Treasurers Egovernment Alliance (the Alliance) for the year ended June 30, 2013

Audit report on the Iowa County Treasurers Egovernment Alliance (the Alliance) for the year ended June 30, 2013

Lime or Chloride Treatment of Granular Base Course Materials, HR-99

Results are presented of triaxial testing of three crushed limestones to which either hydrated high-calcium lime, sodium chloride or calcium chloride had been added. Lime was added at rates of 1, 3, 10 and 16 percent, chlorides were added at 0.5 percent rate only. Speciments were compacted using vibratory compaction apparatus and were tested in triaxial compression using lateral pressures from 10 to 100 psi. Triaxial test results indicate that: (1) sodium chloride slightly decreased the angle of internal friction and increased cohesion, (2) calcium chloride slightly increased the angle of internal friction and decreased cohesion, and (3) lime had no appreciable effect on angle of internal friction but increased cohesion, decreased density and increased pore water pressure.

Dynamic Deflections for Determining Structural Rating of Flexible Pavements, HR-178, 1979

The Road Rater is a dynamic deflection measuring apparatus for flexible base pavements. The Road Rater replaces the Benkelman Beam which was last used by the Iowa DOT in 1977. Road Rater test results correlate reasonably well (correlation coefficient = 0.83) with Benkelman Beam test data. The basic differences between the Road Rater and Benkelman Beam are as follows: 1. The Benkelman Beam uses a static 18,000 lb. load while the Road Rater uses a dynamic 800 to 2,000 lb. loading. 2. The Road Rater tests much faster and more economically than the Benkelman Beam. 3. The Road Rater better simulates a moving truck than the Benkelman Beam. The basic operating principle of the Road Rater is to impart a dynamic loading and measure the resultant movement of the pavement with velocity sensors. This data, when properly adjusted for temperature by use of a nomograph included in this report, can be used to determine pavement life expectancy and estimate overlay thickness required. Road Rater testing will be conducted in the spring, when pavements are in their weakest condition, until seasonal correction factors can be developed. The Road Rater does not have sufficient ram weight to effectively evaluate load carrying capacity of rigid pavements. All rigid pavements react similarly to Road Rater testing and generally deflect from 0.65 to 1.30 mils. Research will be contined to evaluate rigid pavements with the Road Rater, however. The Road Rater has proven to be a reliable, troublefree pavement evaluation machine. The deflection apparatus was originally front-mounted,but was rear-mounted during the winter of 1977-78. Since that time, van handling has greatly improved, and front suspension parts are no longer overstressed due to improper weight distribution.