The White Cane Magazine, Spring 2012, Vol. 3, no. 2

Quarterly newsletter produced by the Iowa Department of Blind, about the information and activities that are on going in the department.

Building World-Class Schools for Iowa: A Legislative Brief, January 14, 2013

The Iowa Department of Education has joined the Office of the Governor to prepare a set of legislative proposals that will bring Iowa closer to its goal of providing a world-class education to all children, no mater where they live. This legislative brief serves as an overview of the legislation, which I encourage you to read and discuss in greater detail. the goals behind these policies are straightforward: Comprehensive and systematically raise and support the teaching profession while expanding efforts to customize instruction to every student's passion and talents. Iowa's children deserve the best education can provide so they leave our schools with the knowledge and skills necessary for successful and rewarding lives. Iowa has many good schools with hard-working, talented educators who deserves our respect and appreciation. While we honor the past work of generations of Iowans who built a strong foundation, it is our responsibility - and our turn - to make a focused, dedicated effort to improve Iowa's schools. We stand at a pivotal moment in Iowa storied education history, in which we have the opportunity and will as community to make the transition from being "good" to being "great".

Field Evaluation of Class A Subbase Using Fly Ash, MLR-87-3, 1988

This project consisted of slipforming a 4-inch thick econocrete subbase on a 6-mile section of US 63. The project location extends south from one mile south of Denver, Iowa to Black Hawk County Road C-66 and consisted of the reconstruction and new construction of a divided four-lane facility. The econocrete was placed 27.3 feet wide in a single pass. Fly ash was used in this field study to replace 30, 45 and 60 percent of the portland cement in three portland cement econocrete base paving mixes. The three mixes contained 300, 350 and 400 pounds of cementitious material per cubic yard. Two Class "C" ashes from Iowa approved sources were used. The ash was substituted on the basis of one pound of ash for each pound of cement removed. The work was done October 6-29, 1987 and May 25-June 9, 1988. The twelve subbase mixes were placed in sections 2500 to 3000 feet in length on both the north and southbound roadways. Compressive strengths of all mixes were determined at 3 and 28 days of age. Flexural strengths of all mixes were determined at 7 and 14 days. In all cases strengths were adequate. The freeze/thaw durability of the econocrete mixes used was reduced by increased fly ash levels but remained above acceptable limits. The test results demonstrate the feasibility of producing econocrete with satisfactory properties even using fly ash at substitution rates up to 45 percent.

Polymer Additive Ductilad D1002 in a Bituminous Seal Coat, HR-2035, 1994

Seal coat and chip seal treatments are commonly used as an economical treatment to provide a new surface to an old asphalt roadway. To be successful, the aggregate or chips must be held in place on the roadway by the asphalt binder over a long period of time. It is common, over time, that the binder becomes aged and brittle and loses its ability to be flexible and hold the aggregate in place. Modifiers have been introduced to extend the life and adhesion characteristics of asphaltic binders.

The White Cane Magazine, Fall 2013, Vol. 4, no. 3

Quarterly newsletter produced by the Iowa Department of Blind, about the information and activities that are on going in the department.

The White Cane Magazine, Spring 2013, Vol. 4, no. 2

Quarterly newsletter produced by the Iowa Department of Blind, about the information and activities that are on going in the department.

The White Cane Magazine, Winter 2013, Vol. 4, no. 1

Quarterly newsletter produced by the Iowa Department of Blind, about the information and activities that are on going in the department.

Freeze-Thaw Durability of Concretes with and without Class C Fly Ash, MLR-94-9 Phase I, 1997

The freeze-thaw resistance of concretes was studied. Nine concrete mixes, made with five cements and cement-Class C fly ash combinations, were exposed to freeze-thaw cycling following 110 to 222 days of moist curing. Prior to the freeze-thaw cycling, the specimens were examined by a low-vacuum scanning electron microscope (SEM) for their microstructure. The influence of a wet/dry treatment was also studied. Infilling of ettringite in entrained air voids was observed in the concretes tested. The extent of the infilling depends on the period of moist curing as well as the wet/dry treatment. The concretes with 15% Class C fly ash replacement show more infilling in their air voids. It was found that the influence of the infilling on the freeze-thaw durability relates to the air spacing factor. The greater the spacing factor, the more expansion under the freeze-thaw cycling. The infilling seems to decrease effective air content and to increase effective spacing factor. The infilling also implies that the filled air voids are water-accessible. These might lead to concrete more vulnerable to the freeze-thaw attack. By combining the above results with field observations, one may conclude that the freeze-thaw damage is a factor related to premature deterioration of portland cement concrete pavements in Iowa.

An Investigation of Portland Cement Concrete Utilizing 70% Class V Aggregate and 30% Calcareous Coarse Aggregate, R-255, 1973

The main sources of coarse aggregate for secondary slip form paving in Southwest Iowa exhibit undesirable "D" cracking. "D" cracking is a discoloration of the concrete caused by fine, hairline cracks. These cracks are caused by the freezing and thawing of moisture inside the coarse aggregate. The cracks are often hour glass shaped, are parallel to each other, and occur along saw joints. The B-4, a typical secondary mix, utilizes 50% fine aggregate and 50% coarse aggregate. It has been proposed that a concrete mix with less coarse aggregate and more fine aggregate might impede this type of deterioration. The Nebraska Standard 47B Mix, a 70% fine aggregate, and 30% coarse aggregate mix, as used by Nebraska Department of Roads produces concrete with ultimate strengths in excess of 4500 psi but because of the higher cost of cement (it is a six bag per cubic yard mix) is not competitive with our present secondary mixes. The sands of Southwest Iowa generally have poorer mortar strengths than the average Iowa Sand. Class V Aggregate also found in Southwest Iowa has a coarser sand fraction, therefore it has a better mortar strength, but exhibits an acidic reaction and therefore must be·used with limestone. This illustrates the need to find a mix for use in Southwest Iowa that possesses adequate strength and satisfactory durability at a low cost. The purpose of this study is to determine a concrete mix with an acceptable cement content which will produce physical properties similar to that of our present secondary paving mixes.

Governor's Inaugural Address, 1923 (40th General Assembly)

A transcript of the Governor's Inaugural Address by Governor Kendell.

Governor's Inaugural Address, 1927 (42nd General Assembly)

A transcript of the Governor's Inaugural Address by Governor Hammill.

Governor's Inaugural Address, 1929 (43rd General Assembly)

A transcript of the Governor's Inaugural Address by Governor Hammill.

Governor's Inaugural Address, 1931 (44th General Assembly)

A transcript of the Governor's Inaugural Address by Governor Turner.

Governor's Inaugural Address, 1933 (45th General Assembly)

A transcript of the Governor's Inaugural Address by Governor Herring.

Governor's Inaugural Address, 1935 (46th General Assembly)

A transcript of the Governor's Inaugural Address by Governor Herring.