Governor's Youth Race and Detention Task Force; Full Force, May 2009

This report, the Full Report, is the culmination of the Task Force’s responsibilities as set out in Executive Order 5, dated October 30, 2007. The Executive Order specifies a number of goals and report requirements.There is a commonly held perception that the use of detention may serve as a deterrent to future delinquency. Data in this report reflect that approximately 40% of youth detained in 2006 were re-detained in 2006. Research conducted by national experts indicates that, particularly for low risk/low level offenders, that the use of detention is not neutral, and may increase the likelihood of recidivism. Comparable data for Iowa are not available (national data studied for this report provide level of risk, but risk level related to detention is not presently available for Iowa). The Task Force finds no evidence suggesting that recidivism levels (as related to detention risk) in Iowa should be different than found in other states. Data in this report also suggest that detention is one of the juvenile justice system’s more costly sanctions ($257 - $340 per day). Other sites and local jurisdictions have been able to redirect savings from the reduced use of juvenile detention to support less costly, community-based detention alternatives without compromising public safety.

Iowa Sex Offender Treatment and Supervision Task Force Report to the Iowa General Assembly, January 22, 2009

The Sex Offender Research Council was formed as a successor to the Sex Offender Treatment and Supervision Task Force, established to provide assistance to the General Assembly. It will respond to legislative direction to adjust its future plans as laid out in this report. Its plans could be modified to broaden or narrow its scope or to assign different priority levels of effort to its current areas of study. Also, further Council considerations of the recommendations it has already submitted could be called for. In the meantime, it is hoped that the information and recommendations submitted through this report prove helpful.

Iowa Sex Offender Treatment and Supervision Task Force Report to the Iowa General Assembly, January, 2010

The Sex Offender Research Council was formed as a successor to the Sex Offender Treatment and Supervision Task Force, established to provide assistance to the General Assembly. It will respond to legislative direction to adjust its future plans as laid out in this report. Its plans could be modified to broaden or narrow its scope or to assign different priority levels of effort to its current areas of study. Also, further Council considerations of the recommendations it has already submitted could be called for. In the meantime, it is hoped that the information and recommendations submitted through this report prove helpful.

Iowa Sex Offender Treatment and Supervision Task Force Report to the Iowa General Assembly, January, 2011

The Sex Offender Research Council was formed as a successor to the Sex Offender Treatment and Supervision Task Force, established to provide assistance to the General Assembly. It will respond to legislative direction to adjust its future plans as laid out in this report. Its plans could be modified to broaden or narrow its scope or to assign different priority levels of effort to its current areas of study. Also, further Council considerations of the recommendations it has already submitted could be called for. In the meantime, it is hoped that the information and recommendations submitted through this report prove helpful.

2013 Elder Abuse Task Force Final Report Pursuant to Senate File 446, Section 50, December 13, 2013

Per the guidance of the Legislative Elder Abuse Prevention and Intervention Interim Committee, a prioritization of the implementation recommendations and proposed legislation are below listed in the order determined in the 2012 Elder Abuse Task Force Report.

Using Scanning Lasers for Real-Time Pavement Thickness Measurement, TR-538, 2006

Due to limited budgets and reduced inspection staff, state departments of transportation (DOTs) are in need of innovative approaches for providing more efficient quality assurance on concrete paving projects. The goal of this research was to investigate and test new methods that can determine pavement thickness in real time. Three methods were evaluated: laser scanning, ultrasonic sensors, and eddy current sensors. Laser scanning, which scans the surface of the base prior to paving and then scans the surface after paving, can determine the thickness at any point. Also, scanning lasers provide thorough data coverage that can be used to calculate thickness variance accurately and identify any areas where the thickness is below tolerance. Ultrasonic and eddy current sensors also have the potential to measure thickness nondestructively at discrete points and may result in an easier method of obtaining thickness. There appear to be two viable approaches for measuring concrete pavement thickness during the paving operation: laser scanning and eddy current sensors. Laser scanning has proved to be a reliable technique in terms of its ability to provide virtual core thickness with low variability. Research is still required to develop a prototype system that integrates point cloud data from two scanners. Eddy current sensors have also proved to be a suitable alternative, and are probably closer to field implementation than the laser scanning approach. As a next step for this research project, it is suggested that a pavement thickness measuring device using eddy current sensors be created, which would involve both a handheld and paver-mounted version of the device.

Monthly Labor Force Data, December 2013

Monthly Labor Force Data report produced by the Iowa Workforce Development.

Monthly Labor Force Data, January 2014

Monthly Labor Force Data report produced by the Iowa Workforce Development.

Monthly Labor Force Data, March 2014

Monthly Labor Force Data report produced by the Iowa Workforce Development.

Monthly Labor Force Data, April 2014

Monthly Labor Force Data report produced by the Iowa Workforce Development.

Quantitative X-Ray Diffraction Measurements by Fast Scanning, HR-111

Two goals were pursued in this research: first, to evaluate statistically some effects of sample preparation and instrument geometry on reproducibility of X-ray diffraction intensity data; and second, to develop a procedure for finding minimum peak and background counting times for a desired level of accuracy. The ratio of calcite to dolomite in limestones was determined in trials. Ultra-fine wet grinding of the limestone in porcelain impact type ball mill gave most consistent X-ray results, but caused considerable line broadening, and peaks were best measured on an area count basis. Sample spinning reduced variance about one third, and a coarse beam-medium detector slit arrangement was found to be best. An equation is developed relating coefficient of variation of a count ratio to peak and background counts. By use of the equation or graphs the minimum coefficient of variation is predicted from one fast scan, and the number and optimum arrangement of additional counting periods to reduce variation to a desired limit may be obtained. The calculated coefficient is the maximum which may be attributed to the counting statistic but does not include experimental deviations.

Monthly Labor Force Data, May 2014

Monthly Labor Force Data report produced by the Iowa Workforce Development.

Monthly Labor Force Data, June 2014

Monthly Labor Force Data report produced by the Iowa Workforce Development.

The Governor's Blue Ribbon Transportation Task Force: Implementation Report for Maximizing the Efficient Use of Iowa's Road Use Tax Fund, 1998

This report documents the Iowa Department of Transportation's accomplishments and ongoing efforts in response to 39 recommendations proposed by the Governor's Blue Ribbon Transportation Task Force at the end of 1995. Governor Terry Branstad challenged the Task Force to "maximize the benefits of each dollar spent from the Road Use Tax Fund."

Missouri River Flood Coordination Task Force Report, September 25, 2011

The Missouri River floods of 2011 will go down in history as the longest duration flooding event this state has seen to date. The combination of above normal snowfall in the upper Missouri River basin followed by the equivalent of nearly one year’s worth of rainfall in May created an above normal runoff situation which filled the Missouri River and the six main reservoirs within the basin. Compounding this problem was colder than normal temperatures which kept much of the snow pack in the upper basin on the ground longer into the spring, setting the stage for this historic event.