RAGBRAI Learn about the Land; Day 4, July 2012

The University of Iowa Office of the State Archaeologist and Team Archaeology are back on RAGBRAI for another year of Archaeology on the Road, and pleased to partner this year with the IDNR: Geological and Water Survey and the U.S. Geological Survey under the theme “Human and Natural History Partners.” Archaeology on the Road brings you the unique cultural history and prehistory of Iowa on the RAGBRAI route, pointing out interesting and significant archaeological sites and sharing Iowa’s past along the way. Look for our booth at Expo and then again on Days 1, 5 and 6 on the route, and also keep an eye out for our Team Archaeology

RAGBRAI Learn about the Land; Day 5, July 2012

The University of Iowa Office of the State Archaeologist and Team Archaeology are back on RAGBRAI for another year of Archaeology on the Road, and pleased to partner this year with the IDNR: Geological and Water Survey and the U.S. Geological Survey under the theme “Human and Natural History Partners.” Archaeology on the Road brings you the unique cultural history and prehistory of Iowa on the RAGBRAI route, pointing out interesting and significant archaeological sites and sharing Iowa’s past along the way. Look for our booth at Expo and then again on Days 1, 5 and 6 on the route, and also keep an eye out for our Team Archaeology.

RAGBRAI Learn about the Land; Day 6, July 2012

The University of Iowa Office of the State Archaeologist and Team Archaeology are back on RAGBRAI for our third year of Archaeology on the Road, and pleased to partner this year with the IDNR: Geological and Water Survey and the U.S. Geological Survey under the theme “Human and Natural History Partners.” Archaeology on the Road brings you the unique cultural history and prehistory of Iowa on the RAGBRAI route, pointing out interesting and significant archaeological sites and sharing Iowa’s past along the way. Look for our booth at Expo and then again on Days 1, 5 and 6 on the route, and also keep an eye out for our Team Archaeology

RAGBRAI Learn about the Land; Day 7, July 2012

The University of Iowa Office of the State Archaeologist and Team Archaeology are back on RAGBRAI for our third year of Archaeology on the Road, and pleased to partner this year with the IDNR: Geological and Water Survey and the U.S. Geological Survey under the theme “Human and Natural History Partners.” Archaeology on the Road brings you the unique cultural history and prehistory of Iowa on the RAGBRAI route, pointing out interesting and significant archaeological sites and sharing Iowa’s past along the way. Look for our booth at Expo and then again on Days 1, 5 and 6 on the route, and also keep an eye out for our Team Archaeology.

Fiscal Year 2011 Annual Report Iowa Workforce Development, 2011

The agency continually strives to improve processes and align the organization in such a way to provide effective, demand driven products and services. Iowa Workforce Development‟s administrative, labor services, workers‟ compensation, labor market information, and the unemployment insurance service staff are located in Des Moines. Additionally, the agency maintains a statewide delivery system of 55 field offices in conjunction with our workforce partners. Through a comprehensive Web site, Iowa Workforce Development provides customers access to major services such as posting résumés; access to a statewide job bank; labor services information, unemployment claim information and filing options; and labor market information, 24 hours a day, seven days a week.

Early Entry Sawed Portland Cement Concrete Transverse Joint Ends, MLR-97-5, 2003

Experiments with early entry light sawing of Portland cement concrete (PCC) contraction joints began in Iowa in 1989. Since that time, changes in early sawing equipment have occurred as well as changes in specifications for sawing. The option to use early sawing for transverse contraction joints was specified in 1992. A problem happening occasionally with early sawing was the break out of some of the concrete around the end of the joint as the saw blade approached the edge of the slab. To prevent this, it was proposed that the sawing would terminate approximately 1/2" to 3/4" before the edge of the slab, creating a "short joint". This procedure would also leave a concrete "dam" to prevent the run-out and waste of the hot liquid joint sealant onto the shoulder. It would also eliminate the need for the labor and material for applying a duct tape dam at the open ends of each sawed joint to stop hot liquid sealant run-out Agreements were made with the contractor to apply the "short joint" technique for 1 day of paving. The evaluation and results are compared with an adjoining control section. The research found no negative aspects from sawing the "short joint". Three specific findings were noted. They are the following: 1) No joint end "blow-out" spalls of concrete occurred. 2) The need for the duct tape dam to stop liquid sealant overflow was eliminated. 3) Joint end corner spalls appear to be caused mainly by construction shouldering operations equipment. The "short joint" sawing technique can be routinely applied to early entry sawed transverse contraction joints with expectations of only positive results.

Solar Powered Highway Delineator System, HR-367, 1993

Currently, many drivers experience some difficulty in viewing the road ahead of them during times of reduced visibility, such as rain, snow, fog, or the darkness of night- Recent studies done by the National Safety Council provide a detailed contrast between fatal accidents occurring during the day and night. Revealed was that the motor vehicle night death rate (4.41 deaths per 100 million miles driven) was sharply higher than the corresponding death rate during daylight hours (1.21). By providing a delineating system powered by the natural resource of solar power, a constant source of visibility may be maintained throughout the evening. Along with providing enough light to trace the outline of the road, other major goals defined in producing this delineator system are as follows: 1. A strong and durable design that would protect the internal components and survive extreme weather conditions. 2. A low maintenance system where components need few repairs or replacements. 3. A design which makes all components accessible in the event that maintenance is needed, but also prevents vandalism. 4. A design that provides greater visibility to drivers and will not harm a vehicle or its passengers in the event of a collision. This solar powered highway delineator consists of an adjustable solar array, a light fixture, and a standard delineator pole. The solar array houses and protects the solar panels, and can be easily adjusted to obtain a maximum amount of sunlight. The light fixture primarily houses the battery, the circuit and the light assembly. Both components allow for easy accessibility and reduce vandalism using internal connections for bolts and wires. The delineator mounting pole is designed to extensively deform in the event of a collision, therefore reducing any harm caused to the vehicle and/or the passengers. The cost of a single prototype to be produced is approximately $70.00 excluding labor costs. However, these material and labor costs will be greatly reduced if a large number of delineators are produced. It is recommended that the Iowa Department of Transportation take full advantage of the research and development put into this delineator design. The principles used in creating this delineator can be used to provide an outline for drivers to follow, or on a larger scale, provide actual roadway lighting in areas where it was never before possible or economically feasible. In either event, the number of fatal accidents will be decreased due to the improved driver visibility in the evening.

Monthly Labor Force Data, December 2013

Monthly Labor Force Data report produced by the Iowa Workforce Development.

Monthly Labor Force Data, January 2014

Monthly Labor Force Data report produced by the Iowa Workforce Development.

Monthly Labor Force Data, March 2014

Monthly Labor Force Data report produced by the Iowa Workforce Development.

Monthly Labor Force Data, April 2014

Monthly Labor Force Data report produced by the Iowa Workforce Development.

Monthly Labor Force Data, May 2014

Monthly Labor Force Data report produced by the Iowa Workforce Development.

Monthly Labor Force Data, June 2014

Monthly Labor Force Data report produced by the Iowa Workforce Development.

Monthly Labor Force Data, August 2014

Monthly Labor Force Data report produced by the Iowa Workforce Development.

Monthly Labor Force Data, September 2014

Monthly Labor Force Data report produced by the Iowa Workforce Development.