Metric Plan Reading Course, HR-324, 1997

This Plan Reading Course was developed by the Department of Civil and Construction Engineering of Iowa State University under contract with the Iowa Highway Research Board, Project HR-324. It is intended to be an instructional tool for Iowa DOT, county and municipal employees within the state of Iowa. Under this contract, a previous Plan Reading Course, prepared for the Iowa State Highway Commission in 1965, has been completely revised using a new format, new plans, updated specifications, and new material. This course is a self-taught course consisting of two parts; Highway Plans, and Bridge and Culvert plans. Each part consists of a self-instruction book, a set of plans, a question booklet, and an answer booklet. This is the self-instruction book for the Bridge and Culvert Plans part of the course. The example structures included in this part of the course are a prestressed concrete beam bridge and a reinforced concrete box culvert.

An Investigation of the Chemical Method of Determining the Cement Content of Hardened Concrete, MLR-71-01 and R-248, 1971

The Iowa State Highway Commission Laboratory is called upon to determine the cement content of hardened concrete when field problems relating to batch weights are encountered. The standard test for determining the cement content is ASTM C-85. An investigation of this method by the New Jersey State Highway Department involving duplicate samples and four cooperating laboratories produced very erratic results, however, the results obtained by this method have not been directly compared to known cement contents of concrete made with various cements and various aggregates used in Iowa.

Sprinkle Treatment of Asphalt Pavements, MLR-78-01, 1978

The paper reviews methods, materials, equipment and results to date of sprinkle treatment within the state. The Iowa Department of Transportation formerly the Iowa State Highway Commission, made its first attempts at sprinkle treatment of fresh asphalt concrete in 1974. Increased emphasis in mix design of asphalt mixes and aggregate selection of durable non-polishing materials has generated costly restrictions on the use of local materials. During the summer of 1975, a dual spinner, tail-gate spreader was mounted on a standard departmental dump truck to attempt additional sprinkle treatment on a section of Iowa 7 west of Ft. Dodge. The dump truck equipment was marginally satisfactory, but results of increased surface skid texture and durability were well demonstrated. On 1976 a new, current order dump truck was modified with an auxiliary transmission and a set of slick surfaced tires, and dual spinner spreader was mounted to again attempt surface sprinkle treatment, which was conducted in 1977.

Report on Rest Area Water Systems for Interstate Highways, 1967

Introduction: As part of the roadside development along the Interstate Highway System, the Iowa State Highway Commission has constructed eight pair of rest area facilities. Furthermore, two pair are presently under construction with an additional two pair proposed for letting in 1967. An additional nine and one-half pairs of rest areas are in the planning phase, a grand total of 45 rest Brea buildings. The facilities existing were planned and designed in a relatively short period of time. The rest area facilities are unusual in terms of water use, water demand rates, and the fact that there are no applicable guidelines from previous installations. Such facilities are a pioneering effort to furnish a service -which the travelling public desires and will use. The acceptance and current use of the existing facilities shows that the rest areas do provide a service the public will use and appreciate. The Iowa State Highway Commission is to be congratulated for this· pioneering effort. However there are problems, as should be expected when design of a new type of facility has no past operating experience to use as a guide. Another factor which enters is that a rest area facility is quite different and rather unrelated to engineering in the highway field of practice. Basically, the problems encountered can be resolved into several areas, namely 1) maintenance problems in equipment due to 2) insufficient capacity of several other elements of the water systems, and 3) no provisions for water quality control. This study and report is supposed to essentially cover the review of the rest areas, either existing and under construction or letting. However, the approach used has been somewhat different. Several basic economically feasible water system schemes have been developed which are· adaptable to the different well capacities and different water qualities encountered. These basic designs are used as a guide in recommending modifications to the existing rest area water systems, anticipating that the basic designs will be used for future facilities. The magnitude of the problems involved is shown by the fact that the projected water use and demand variations of each rest area building is equivalent to the water supply for a community of about 100 people. The problems of proper operation and maintenance of an eventual thirty to forty-five such facilities are gigantic. For successful operation the rest area water systems must have a high degree of standardization and interchangeability of all elements of the water systems, even if it means a limited degree of over-design in some rest area facilities.

A Continuous Span Aluminum Girder Concrete Deck Bridge - Part 2 of 2: Fatigue Tests of Aluminum Girders, Final Report, 1997

In 1957, the Iowa State Highway Commission, with financial assistance from the aluminum industry, constructed a 220-ft (67-m) long, four-span continuous, aluminum girder bridge to carry traffic on Clive Road (86th Street) over Interstate 80 near Des Moines, Iowa. The bridge had four, welded I-shape girders that were fabricated in pairs with welded diaphragms between an exterior and an interior girder. The interior diaphragms between the girder pairs were bolted to girder brackets. A composite, reinforced concrete deck served as the roadway surface. The bridge, which had performed successfully for about 35 years of service, was removed in the fall of 1993 to make way for an interchange at the same location. Prior to the bridge demolition, load tests were conducted to monitor girder and diaphragm bending strains and deflections in the northern end span. Fatigue testing of the aluminum girders that were removed from the end spans were conducted by applying constant-amplitude, cyclic loads. These tests established the fatigue strength of an existing, welded, flange-splice detail and added, welded, flange-cover plates and horizontal web plate attachment details. This part, Part 2, of the final report focuses on the fatigue tests of the aluminum girder sections that were removed from the bridge and on the analysis of the experimental data to establish the fatigue strength of full-size specimens. Seventeen fatigue fractures that were classified as Category E weld details developed in the seven girder test specimens. Linear regression analyses of the fatigue test results established both nominal and experimental stress-range versus load cycle relationships (SN curves) for the fatigue strength of fillet-welded connections. The nominal strength SN curve obtained by this research essentially matched the SN curve for Category E aluminum weldments given in the AASHTO LRFD specifications. All of the Category E fatigue fractures that developed in the girder test specimens satisfied the allowable SN relationship specified by the fatigue provisions of the Aluminum Association. The lower-bound strength line that was set at two standard deviations below the least squares regression line through the fatigue fracture data points related well with the Aluminum Association SN curve. The results from the experimental tests of this research have provided additional information regarding behavioral characteristics of full-size, aluminum members and have confirmed that aluminum has the strength properties needed for highway bridge girders.

Residual Stresses and Fatigue Behavior of Welded Structural Members, HR-94, 1967

A research project entitled "Residual Stresses and Fatigue Behavior of Welded Structural Members" was conducted at the Structural Research Laboratory of the Engineering Research Institute at Iowa State University under the sponsorship of the Iowa State Highway Commission. The objective of the project was to study experimentally the fatigue behavior of flange plates in welded beam sections as influenced by different residual stress distributions which are caused by different sizes of welds.

Study of Alternate Pavement Designs, 1968

This report is submitted pursuant to a contract dated August 30, 1967, between the Iowa State Highway Commission and Howard, Needles, Tammen & Bergendoff, Consulting Engineers, in connection with studies determining (11,A) alternate pavement designs, and (11,B) criteria for geometric design studies. Included herein is that portion of the report covering Paragraph 11,A, comprising preparation of alternate type pavement designs (Portland Cement and Asphaltic Concrete) for the Cedar Valley Freeway and proposed US-518 from 1-80 to US-30. These alternate pavement designs consider quality and availability of aggregates, soil conditions and traffic information, to determine details and dimensions of pavement design. Comparative cost studies were prepared from alternate design data and recommendations as to pavement type are presented for Commission review.

50 Years of Highway Maintenance

An overview of the first 50 years of the Iowa State Highway Commission.

Communication System : Employing the IBM 370 Computer System, 1974

The Communication System was developed for the Iowa State Highway Commission Materials Department to unitize the computer terminal system to speed up transmission of the various material test reports that flow between the central office and the six district offices. Letters may be sent from one corner of the state to the other and received in seconds instead of days going by mail.

Review of Geometric Design Criteria and Lighting Design Criteria, 1968

The investigations for this report were initiated in October, 1967, to perform the following: l. Review the current Iowa State Highway Commission roadway geometric design standards and criteria for conformance with national policies and recent research findings with special attention to high way safety. 2. Review the current Iowa State Highway Commission roadway lighting design standards and criteria for conformance with national policies and recent research findings with special attention to high way safety

Annual Report of the Iowa Grape and Wine Development Commission for Fiscal Year, 2007

FY2007 was a productive year for the Iowa Grape and Wine Development Commission. Fourteen proposals were recommended for funding totaling over $390,000 in outlays. Included in the approved proposals were funds for the establishment and staffing of a Midwest Grape and Wine Institute at Iowa State University, a newly created viticulturist position at Des Moines Area Community College, funding for the first annual Mid-American Wine Competition, and marketing and promotion of four regional cooperative wine events and one wine trail. Commission funding supported a survey of commercial wine producers and grape growers and a new brochure on Iowa���s vineyards. A committee was formed to provide details for a Scholarship Program to aid vineyard and winery staff with the expenses of accredited coursework. Based on the survey conducted and from other governmental and industry sources, the Iowa grape and wine industry appears to continue to be very viable and growth continues at a strong pace. Wine produced in the state for 2007 was estimated at a market value in excess of $12.3 million. A tabulation of the budget revealed that just over $800,000 in wine gallonage tax appropriations have been received into the Grape and Wine Development Fund from 15 FY2003 through FY2007. Expenditures have totaled just over $607,000 during that same time. Just over 80% of expenditures have gone to “Technical” spending. Over time, funds invested in “Technical” programs will translate into an increasingly educated and institutionally-supported industry. Local, regional, and statewide events also appear to be increasing in popularity and the Commission plans to continue and increase support for these events. It is hoped the Scholarship Program will be up and running and funding will need to be appropriated for that project. The Commission also believes many projects and events will become more and more self sustaining as they develop and mature. As they continue to support Iowa���s grape and wine industry, the members of the Commission look forward to working with individuals, commercial enterprises, state and federal agencies, and industry-sponsored institutions in the upcoming year and in years to come.

Annual Report of the Iowa Grape and Wine Development Commission for Fiscal Year, 2008

FY2008 was a productive year for the Iowa Grape and Wine Development Commission. Sixteen proposals were recommended for funding from FY2008 funds and carryover totaling just over $396,000 in outlays. Included in the approved proposals were staffing and equipment for the Midwest Grape and Wine Industry Institute’s wine diagnostics laboratory at Iowa State University, continued support for the viticulturist position at Des Moines Area Community College, funding for the second annual Mid-American Wine Competition, and assistance for marketing and promotion of Ice coats an Iowa vineyard after a February 2008 ice storm. Photo by Mike White and courtesy of Iowa State University. 16 two wine trail associations and seven festivals and events. Commission funding supported a salaried position within IDALS to manage the Iowa Grape and Wine Development Fund and to serve as the Director of the Iowa Grape and Wine Development Commission. The Commission approved funding for a Scholarship Program. The formally created Scholarship Committee met twice in FY2008 to finalize details for the Program and to approve scholarships to twenty-six applicants to aid with the expenses of accredited coursework. Based on data collected by IDALS, the Iowa Department of Economic Development, the Iowa Alcoholic Beverages Division, and Iowa State University the Iowa grape and wine industry appears to continue to be very viable and growth continues at a strong pace. Presently, Iowa ranks 14th in the nation for the number of wineries, and wine produced in the state for 2008 was estimated at a market value in excess of $14.0 million. A tabulation of the budget revealed that just over $1,080,000 in wine gallonage tax appropriations and legislative appropriations have been deposited into the Grape and Wine Development Fund from FY2003 through FY2008. Removing encumbered funds, expenditures have totaled just over $942,500 during that same time. “Financial” funding – used for fostering public awareness and participation of industry events - increased from 6% of expenditures in FY2007 to 9% in FY2008. Used for support of research, education, and outreach, a little over 80% of expenditures and encumbered funds were earmarked for “Technical” spending. Over time, funds invested in “Technical” programs will translate into an increasingly educated and institutionally-supported industry. Local, regional, and statewide events also appeared to be increasing in popularity. The Commission was encouraged to see increased support for these events. It is hoped, too, that the Scholarship Program will provide needed funding to help meet the educational goals of the industry’s workforce. As they continue to support Iowa���s grape and wine industry, the Commissioners look forward to working with individuals, commercial enterprises, state and federal agencies, and industry-sponsored institutions in FY2009 and in years to come.

State Library of Iowa Library Services and Technology Act Five-Year Plan, 2002

The Iowa Commission of Libraries, the State Library’s governing board, convened the Library Services Task Force in August 2000. This group consisted of 46 Iowans from across the state, including librarians from all types of libraries, library trustees, legislators, members of Iowa Regional Library system (now called Library Service Areas) and Area Education Agencies, and citizens. Their mission was to make recommendations to the Commission on positioning libraries to effectively and efficiently meet the future needs of Iowans. Needs and expectations of Iowa Library customers and funding authorities were identified and examined by the Task Force, and are reflected in its recommendations. The Commission received the Task Force recommendations in December 2000, carefully studied them, solicited input from the Iowa library community, and with a few changes, forwarded the recommendations to the Governor and the Iowa General Assembly. These recommendations are now known as Iowa Commission of Libraries priorities and serve as a blueprint for future development of the Iowa library system.

State Library of Iowa Library Services and Technology Act Five-Year Plan, 2002

The Iowa Commission of Libraries, the State Library’s governing board, convened the Library Services Task Force in August 2000. This group consisted of 46 Iowans from across the state, including librarians from all types of libraries, library trustees, legislators, members of Iowa Regional Library system (now called Library Service Areas) and Area Education Agencies, and citizens. Their mission was to make recommendations to the Commission on positioning libraries to effectively and efficiently meet the future needs of Iowans. Needs and expectations of Iowa Library customers and funding authorities were identified and examined by the Task Force, and are reflected in its recommendations. The Commission received the Task Force recommendations in December 2000, carefully studied them, solicited input from the Iowa library community, and with a few changes, forwarded the recommendations to the Governor and the Iowa General Assembly. These recommendations are now known as Iowa Commission of Libraries priorities and serve as a blueprint for future development of the Iowa library system.

Annual Report of the Iowa Racing and Gaming Commission, 2007

Annual report of the Iowa Racing & Gaming Commission