Field Measurements of Ice Scraping Loads on Front Mounted Plow Blades, HR-374, 1997

Removal of ice from roads is of the more challenging task in winter highway maintenance. The best mechanical method is to use a truck with underbody plow blade, but such equipment is not available to all agencies charged with winter maintenance operations. While counties and cities often use motor graders to scrape ice, it would be of great benefit if front mounted plows could be used effectively for ice removal. To reveal and understand the factors that influence the performance of these plows, measurement of the forces experienced by the plow blades during ice scraping is desirable. This study explores the possibility of using accelerometers to determine the forces on a front-mounted plow when scraping ice. The plow was modeled by using a dynamic approach. The forces on the plow were to be determined by the measurement of the accelerations of the plow. Field tests were conducted using an "as is" front-mounted plow instrumented with accelerometers. The results of the field tests indicate that in terms of ice removal, the front-mounted plow is not favorable equipment. The major problem in this study is that the front mounted plow was not able to cut ice, and therefore experienced no significant scraping forces. However, the use of accelerometers seems to be promising for analyzing the vibration problems of the front-mounted plow.

Special Surface Preparation Prior to Bituminous Overlays, HR-231, 1987

Research project HR-231, "Special Surface Preparation Prior to Bituminous Overlay", was initiated in 1982 to study the effectiveness of three different crack fillers in extending pavement life. In particular, this project was designed to determine if any of the fillers could substantially reduce the rate of subsurface deterioration and general deterioration of an asphalt pavement at crack locations. This project also sought to determine the effects of the various crack filling procedures on different thicknesses of bituminous overlays. The three fillers, a fly ash slurry, an emulsion, and a rubberized asphalt mixture, were used along with a control section with no crack filler material on a 2.5 mile section of Cerro Gordo Trunk Route S-25 south of the town of Thornton. This report discusses the construction and performance of each filler material and makes recommendations concerning future use of any of the materials used.

Measurement of Ice Scraping Forces on Snow-Plow Underbody Blades, HR-372, 1997

In this study, several new cutting edges for removal of ice from the roadway were tested in a series of closed road tests. These new cutting edges consisted of a variety of serrated shapes. The study also included measurement of ice scraping forces by in-service trucks. These trucks were instrumented in a similar manner as the truck used in the closed-road tests. Results from the closed-road and in-service tests were analyzed by two parameters. The first parameter is the scraping effectiveness, which is defined as the average horizontal force experienced by a cutting edge. The amount of ice scraped from the roadway is directly proportional to the magnitude of the scraping effectiveness. Thus an increase in scraping effectiveness indicates an increase in the amount of ice being scraped from the roadway. The second parameter is force angle, which is defined as tan to the -1 power [vertical force/horizontal force]. A combination of a minimal force angle and a maximized scraping effectiveness represents a case in which the maximal amount of ice is being removed from the pavement without an exceptionally large vertical force. Results indicate that each cutting edge produced a maximal scraping effectiveness with a testing configuration of a 15 deg blade angle and a 23,000 lb. download force. Results also indicate that each cutting edge produced a minimal force angle with a testing configuration of a 15 deg blade angle and a 10,000 lb. download force. Results from the in-service trucks produced similar data and also similar trends within the data when compared to the results of the closed-road tests. This result is most important, as it suggests that the closed-road tests do provide an accurate measure of ice scraping forces for a given blade and configuration of that blade. Thus if the closed-road tests indicate that certain blades perform well, there is now excellent reason to conduct full scale tests of such blades.

Report on a special investigation of Grange Township for the period January 1, 2006 through November 15, 2013

Report on a special investigation of Grange Township for the period January 1, 2006 through November 15, 2013

Iowa Lottery Special Edition, March 2014

Iowa Lottery Retailer Newsletter Special Edition

Iowa Lottery Action Special Edition, October 28, 2013

Iowa Lottery Action Special Edition Retailer Newsletter

Iowa Lottery Action Special Edition, Sept. 16, 2013

Iowa Lottery Retailer Newsletter

Iowa Lottery Action Special Ediition, June 25, 2012

Iowa Lottery Retailer Newsletter Special Edition

Iowa Lottery Action Special Edition, May 6, 2013

Iowa Lottery Retailer Newsletter Special Edition

Iowa Lottery Action Special Edition, February 2012

Iowa Lottery Retailer Newsletter Special Edition

Iowa Lottery Action Special Edition, Oct. 17, 2011

Iowa Lottery Retailer Newsletter Special Edition

Iowa Lottery Action Special Edition, May 23, 2011

Iowa Lottery Retailer Newsletter Special Edition

Iowa fish and wildlife news, Special Winter Issue [1999]

This DNR periodical contains current information on Iowa Fish and Wildlife Management.

Iowa fish and wildlife news, Special 1999 Fishing Issue

This DNR periodical contains current information on Iowa Fish and Wildlife Management.

Iowa fish and wildlife news, Special 1999 hunting issue

This DNR periodical contains current information on Iowa Fish and Wildlife Management.