IPIB Monthly Column, February 2015

This is a monthly column prepared by the Iowa Public Information Board to update Iowans on the IPIB’s activities and provide information on some of the issues routinely addressed by the board.

Development of Quality Standards for Inclusion of High Recycled Asphalt Pavement Content in Asphalt Mixtures – Phase II, TR-658, 2015

To conserve natural resources and energy, the amount of recycled asphalt pavement has been steadily increasing in the construction of asphalt pavements. The objective of this study is to develop quality standards for inclusion of high RAP content. To determine if the higher percentage of RAP materials can be used on Iowa’s state highways, three test sections with target amounts of RAP materials of 30%, 35% and 40% by weight were constructed on Highway 6 in Iowa City. To meet Superpave mix design requirements for mixtures with high RAP contents, it was necessary to fractionate the RAP materials. Three test sections with actual RAP materials of 30.0%, 35.5% and 39.2% by weight were constructed and the average field densities from the cores were measured as 95.3%, 94.0%, and 94.3%, respectively. Field mixtures were compacted in the laboratory to evaluate moisture sensitivity using a Hamburg Wheel Tracking Device. After 20,000 passes, rut depths were less than 3mm for mixtures obtained from three test sections. The binder was extracted from the field mixtures from each test section and tested to identify the effects of RAP materials on the performance grade of the virgin binder. Based on Dynamic Shear Rheometer and Bending Beam Rheometer tests, the virgin binders (PG 64-28) from test sections with 30.0%, 35.5% and 39.2% RAP materials were stiffened to PG 76-22, PG 76-16, and PG 82-16, respectively. The Semi-Circular Bending (SCB) test was performed on laboratory compacted field mixtures with RAP amounts of 30.0%, 35.5% and 39.2% at two different temperatures of -18 and -30 °C. As the test temperature decreased, the fracture energy decreased and the stiffness increased. As the RAP amount increased, the stiffness increased and the fracture energy decreased. Finally, a condition survey of the test sections was conducted to evaluate their short-term pavement performance and the reflective transverse cracking did not increase as RAP amount was increased from 30.0% to 39.2%.

Assessment of Nondestructive Testing Technologies for Quality Control/Quality Assurance of Asphalt Mixtures, TR-653, 2015

Asphalt pavements suffer various failures due to insufficient quality within their design lives. The American Association of State Highway and Transportation Officials (AASHTO) Mechanistic-Empirical Pavement Design Guide (MEPDG) has been proposed to improve pavement quality through quantitative performance prediction. Evaluation of the actual performance (quality) of pavements requires in situ nondestructive testing (NDT) techniques that can accurately measure the most critical, objective, and sensitive properties of pavement systems. The purpose of this study is to assess existing as well as promising new NDT technologies for quality control/quality assurance (QC/QA) of asphalt mixtures. Specifically, this study examined field measurements of density via the PaveTracker electromagnetic gage, shear-wave velocity via surface-wave testing methods, and dynamic stiffness via the Humboldt GeoGauge for five representative paving projects covering a range of mixes and traffic loads. The in situ tests were compared against laboratory measurements of core density and dynamic modulus. The in situ PaveTracker density had a low correlation with laboratory density and was not sensitive to variations in temperature or asphalt mix type. The in situ shear-wave velocity measured by surface-wave methods was most sensitive to variations in temperature and asphalt mix type. The in situ density and in situ shear-wave velocity were combined to calculate an in situ dynamic modulus, which is a performance-based quality measurement. The in situ GeoGauge stiffness measured on hot asphalt mixtures several hours after paving had a high correlation with the in situ dynamic modulus and the laboratory density, whereas the stiffness measurement of asphalt mixtures cooled with dry ice or at ambient temperature one or more days after paving had a very low correlation with the other measurements. To transform the in situ moduli from surface-wave testing into quantitative quality measurements, a QC/QA procedure was developed to first correct the in situ moduli measured at different field temperatures to the moduli at a common reference temperature based on master curves from laboratory dynamic modulus tests. The corrected in situ moduli can then be compared against the design moduli for an assessment of the actual pavement performance. A preliminary study of microelectromechanical systems- (MEMS)-based sensors for QC/QA and health monitoring of asphalt pavements was also performed.

Secure and Prepared Newsletter, March 2015, Vol. 11, no. 3

A bi-weekly newsletter for those involved in the fields of homeland security and/or emergency management

Friday Facts, March 27, 2015, Vol. 246

Bureau of Nutrition and Health Promotion part of the Iowa Department of Public Health produces of weekly newsletter about the Iowa WIC Program for the State of Iowa citizen.

Iowa Unemployment Rates by County, February 2015

Iowa Unemployment Rates by County map produced by the Iowa Workforce Development.

Neither Fair Nor Impartial: An Investigation into the Iowa Department of Corrections’ Sanctions Against an Inmate, February 16, 2015

An Investigation into the Iowa Department of Corrections’ Sanctions Against an Inmate

B-1 Monthly Report of Medical Services Provided under Title XIX of the Social Security Act, March 2015

B-1 Medicaid Reports -- The monthly Medicaid series of eight reports provide summaries of Medicaid eligibles, recipients served, and total payments by county, category of service, and aid category. These reports may also be known as the B-1 Reports. These reports are each available as a PDF for printing or as a CSV file for data analysis. Report Report name IAMM1800-R001--Medically Needy by County - No Spenddown and With Spenddown; IAMM1800-R002--Total Medically Needy, All Other Medicaid, and Grand Total by County; IAMM2200-R002--Monthly Expenditures by Category of Service; IAMM2200-R003--Fiscal YTD Expenditures by Category of Service; IAMM3800-R001--ICF & ICF-MR Vendor Payments by County; IAMM4400-R001--Monthly Expenditures by Eligibility Program; IAMM4400-R002--Monthly Expenditures by Category of Service by Program; IAMM4600-R002--Elderly Waiver Summary by County.

Iowa Department of Revenue Performance Plan, FY 2015

Agency Performance Plan, Iowa Department of Revenue

B-1 Monthly Report of Medical Services Provided under Title XIX of the Social Security Act, June 2015

B-1 Medicaid Reports -- The monthly Medicaid series of eight reports provide summaries of Medicaid eligibles, recipients served, and total payments by county, category of service, and aid category. These reports may also be known as the B-1 Reports. These reports are each available as a PDF for printing or as a CSV file for data analysis. Report Report name IAMM1800-R001--Medically Needy by County - No Spenddown and With Spenddown; IAMM1800-R002--Total Medically Needy, All Other Medicaid, and Grand Total by County; IAMM2200-R002--Monthly Expenditures by Category of Service; IAMM2200-R003--Fiscal YTD Expenditures by Category of Service; IAMM3800-R001--ICF & ICF-MR Vendor Payments by County; IAMM4400-R001--Monthly Expenditures by Eligibility Program; IAMM4400-R002--Monthly Expenditures by Category of Service by Program; IAMM4600-R002--Elderly Waiver Summary by County.

Iowa Finance Authority Agency Performance Plan, 2015

Agency Performance Plan

Department of Education Iowa Public Television Performance Plan, FY 2015

Agency Performance Plan, Iowa Public Television

Iowa Department of Corrections Performance Plan FY 2015

Agency Performance Plan for Iowa Department of Corrections

Iowa Utilities Board Performance Plan FY 2015

Agency Performance Plan for Iowa Utilities Board

Iowa Department of Commerce Insurance Division, Agency Performance Plan, 2015

Annual Report, Agency Performance Plan