An interregional input-output analysis of the pollution content of trade flows and environmental trade balances between five states in the US Mid-West

In this paper we attempt an empirical application of the multi-region input-output (MRIO) method in order to enumerate the pollution content of interregional trade flows between five Mid-West regions/states in the US –Illinois, Indiana, Iowa, Michigan and Wisconsin – and the rest of the US. This allows us to analyse some very important issues in terms of the nature and significance of interregional environmental spillovers within the US Mid-West and the existence of pollution ‘trade balances’ between states. Our results raise questions in terms of the extent to which authorities at State level can control local emissions where they are limited in the way some emissions can be controlled, particularly with respect to changes in demand elsewhere in the Mid-West and US. This implies a need for policy co-ordination between national and state level authorities in the US to meet emissions reductions targets. The existence of an environmental trade balances between states also raises issues in terms of net losses/gains in terms of pollutants as a result of interregional trade within the US and whether, if certain activities can be carried out using less polluting technology in one region relative to others, it is better for the US as a whole if this type of relationship exists.

Responsibility for regional waste generation: A single region extended input-output analysis with uni-directional trade flows

The paper uses a regional input-output (IO) framework and data derived on waste generation by industry to examine regional accountability for waste generation. In addition to estimating a series of industry output-waste coefficients, the paper considers two methods for waste attribution but focuses first on one (trade endogenised linear attribution system (TELAS)) that permits a greater focus on private and public final consumption as the main exogenous driver of waste generation. Second, the paper uses a domestic technology assumption (DTA) to consider a regional ‘waste footprint’ where local consumption requirements are assumed to be met through domestic production.

An HEI-Disaggregated Input-Output Table for Scotland

This paper describes how the education sector of the Scottish Input-Output tables is disaggregated to identify a separate sector for each of Scotland’s twenty Higher Education Institutions (HEIs). The process draws on accounting and survey data to accurately determine the incomes and expenditures of each institution. In particular we emphasise determining the HEIs incomes source of origin to inform their treatment, as endogenous or exogenous, in subsequent analyses. The HEI-disaggregated Input- Output table provides a useful descriptive snapshot of the Scottish economy and the role of HEIs within it for a particular year, 2006. The table can be used to derive multipliers and conduct various impact studies of each institution or the sector as a whole. The table is furthermore useful to calibrate other multi-sectoral, HEI disaggregated models of regional economies, including Social Accounting Matrix (SAM) and computable general equilibrium (CGE) models.

An HEI-Disaggregated Input-Output Table for Wales

This paper describes how the education sector of the Welsh Input-Output tables is disaggregated to identify a separate sector for each of Wales’s twelve Higher Education Institutions (HEIs). The process draws on accounting and survey data to accurately determine the incomes and expenditures of each institution. In particular we emphasise determining the HEIs incomes source of origin to inform their treatment, as endogenous or exogenous, in subsequent analyses. The HEI-disaggregated Input-Output table provides a useful descriptive snapshot of the Welsh economy and the role of HEIs within it for a particular year, 2006. The table can be used to derive multipliers and conduct various impact studies of each institution or the sector as a whole. The table is furthermore useful to calibrate other multi-sectoral, HEI-disaggregated models of regional economies, including Social Accounting Matrix (SAM) and computable general equilibrium (CGE) models.

An HEI-Disaggregated Input-Output Table for Northern-Ireland

This paper describes how the education sector of an Input-Output table for Northern Ireland is disaggregated to identify a separate sector for each of the four Northern Irish Higher Education Institutions (HEIs). The process draws on accounting and survey data to accurately determine the incomes and expenditures of each institution. In particular we emphasise determining the HEIs incomes source of origin to inform their treatment, as endogenous or exogenous, in subsequent analyses. The HEI-disaggregated Input-Output table provides a useful descriptive snapshot of the Northern Irish economy and the role of HEIs within it for a particular year, 2006. The table can be used to derive multipliers and conduct various impact studies of each institution or the sector as a whole. The table is furthermore useful to calibrate other multisectoral, HEI-disaggregated models of regional economies, including Social Accounting Matrix (SAM) and computable general equilibrium (CGE) models.

Disaggregating the Household Sector in a 2004 UK Input Output Table and Social Accounting Matrix by Income Quintiles

This paper disaggregates a UK Input-Output (IO) table for 2004 based on household income quintiles from published survey data. In addition to the Input-Output disaggregation, the household components of a UK Income Expenditure (I-E) account used to inform a Social Accounting Matrix (SAM),have also been disaggregated by household income quintile. The focus of this paper is on household expenditure on the UK energy sector.

Beyond Intermediates: The Role of Consumption and Commuting in the Construction of Local Input-Output Tables

It is a well-established fact in the literature on simulating Input-Output tables that mechanical methods for estimating intermediate trade lead to biased results where cross-hauling is underestimated and Type-I multipliers are overstated. Repeated findings to this effect have led to a primary emphasis on advocating the accurate estimation of intermediate trade flows. This paper reviews previous research and argues for a qualification of the consensus view: When simulating IO tables, construction approaches need to consider spill-over effects driven by wage and consumption flows. In particular, for the case of metropolitan economies, wage and consumption flows are important if accurate Type-II multipliers are to be obtained. This is demonstrated by constructing an interregional Input-Output table, which captures interdependencies between a city and its commuter belt, nested within the wider regional economy. In addition to identifying interdependencies caused by interregional intermediate purchases, data on subregional household incomes and commuter flows are used to identify interdependencies from wage payments and household consumption. The construction of the table is varied around a range of assumptions on intermediate trade and household consumption to capture the sensitivity of multipliers.

The Distribution Dynamics of Output Multipliers in Scotland 1998–2007

In an input-output context the impact of any particular industrial sector is commonly measured in terms of the output multiplier for that industry. Although such measures are routinely calculated and often used to guide regional industrial policy the behaviour of such measures over time is an area that has attracted little academic study. The output multipliers derived from any one table will have a distribution; for some industries the multiplier will be relatively high, for some it will be relatively low. The recentpublication of consistent input-output tables for the Scottish economy makes it possible to examine trends in this mdistribution over the ten year period 1998-2007. This is done by comparing the means and other summary measures of the distributions, the histograms and the cumulative densities. The results indicate a tendency for the multipliers to increase over the period. A Markov chain modelling approach suggests that this drift is a slow but long term phenomenon which appears not to tend to an equilibrium state. The prime reason for the increase in the output multipliers is traced to a decline in the relative importance of imported (both from the rest of the UK and the rest of the world) intermediate inputs used by Scottish industries. This suggests that models calibrated on the set of tables might have to be interpreted with caution.

A comparison of results from MRIO and interregional computable general equilibrium (CGE) analyses of the impacts of a positive demand shock on the ‘CO2 trade balance’ between Scotland and the rest of the UK

In previous work we have applied the environmental multi-region input-output (MRIO) method proposed by Turner et al (2007) to examine the ‘CO2 trade balance’ between Scotland and the Rest of the UK. In McGregor et al (2008) we construct an interregional economy-environment input-output (IO) and social accounting matrix (SAM) framework that allows us to investigate methods of attributing responsibility for pollution generation in the UK at the regional level. This facilitates analysis of the nature and significance of environmental spillovers and the existence of an environmental ‘trade balance’ between regions. While the existence of significant data problems mean that the quantitative results of this study should be regarded as provisional, we argue that the use of such a framework allows us to begin to consider questions such as the extent to which a devolved authority like the Scottish Parliament can and should be responsible for contributing to national targets for reductions in emissions levels (e.g. the UK commitment to the Kyoto Protocol) when it is limited in the way it can control emissions, particularly with respect to changes in demand elsewhere in the UK. However, while such analysis is useful in terms of accounting for pollution flows in the single time period that the accounts relate to, it is limited when the focus is on modelling the impacts of any marginal change in activity. This is because a conventional demand-driven IO model assumes an entirely passive supply-side in the economy (i.e. all supply is infinitely elastic) and is further restricted by the assumption of universal Leontief (fixed proportions) technology implied by the use of the A and multiplier matrices. In this paper we argue that where analysis of marginal changes in activity is required, a more flexible interregional computable general equilibrium approach that models behavioural relationships in a more realistic and theory-consistent manner, is more appropriate and informative. To illustrate our analysis, we compare the results of introducing a positive demand stimulus in the UK economy using both IO and CGE interregional models of Scotland and the rest of the UK. In the case of the latter, we demonstrate how more theory consistent modelling of both demand and supply side behaviour at the regional and national levels affect model results, including the impact on the interregional CO2 ‘trade balance’.

The Importance of Revenue Sharing for the Local Economic Impacts of a Renewable Energy Project: A Social Accounting Matrix Approach

As demand for electricity from renewable energy sources grows, there is increasing interest, and public and financial support, for local communities to become involved in the development of renewable energy projects. In the UK, “Community Benefit” payments are the most common financial link between renewable energy projects and local communities. These are “goodwill” payments from the project developer for the community to spend as it wishes. However, if an ownership stake in the renewable energy project were possible, receipts to the local community would potentially be considerably higher. The local economic impacts of these receipts are difficult to quantify using traditional Input-Output techniques, but can be more appropriately handled within a Social Accounting Matrix (SAM) framework where income flows between agents can be traced in detail. We use a SAM for the Shetland Islands to evaluate the potential local economic and employment impact of a large onshore wind energy project proposed for the Islands. Sensitivity analysis is used to show how the local impact varies with: the level of Community Benefit payments; the portion of intermediate inputs being sourced from within the local economy; and the level of any local community ownership of the project. By a substantial margin, local ownership confers the greatest economic impacts for the local community.

Constructing a Social Accounting Matrix for Libya

In this paper a Social Accounting Matrix is constructed for Libya for the year 2000. The procedure was divided into three steps. First, a macro SAM was constructed to consistently capture and represent the macroeconomic framework of the Libyan economy in 2000. Second, that macro SAM was disaggregated into a micro SAM incorporating the accounts for individual activities, primary factors and the main economic institutions. But the SAM obtained in this way was not balanced. So in thE final step we balanced the SAM using a cross-entropy procedure in General Algebraic Modelling System (GAMS). This SAM integrates national income, inputoutput, flow-of-funds, and foreign trade statistics into a comprehensive and consistent dataset. The lack of coherent time series data for Libya is a serious obstacle for applied research that uses econometric analysis. Our main intension in constructing this SAM has been one of providing benchmark data for economy-wide analysis using CGE modelling for Libya.

The added value from adopting a CGE approach to analyse changes in environmental trade balances

The application of multi-region environmental input-output (IO) analysis to the problem of accounting for emissions generation (and/or resource use) under different accounting principles has become increasingly common in the ecological and environmental economics literature in particular, with applications at the international and interregional subnational level. However, while environmental IO analysis is invaluable in accounting for pollution flows in the single time period that the accounts relate to, it is limited when the focus is on modelling the impacts of any marginal change in activity. This is because a conventional demand-driven IO model assumes an entirely passive supply-side in the economy (i.e. all supply is infinitely elastic) and is further restricted by the assumption of universal Leontief (fixed proportions) technology implied by the use of the A and multiplier matrices. Where analysis of marginal changes in activity is required, extension from an IO accounting framework to a more flexible interregional computable general equilibrium (CGE) approach, where behavioural relationships can be modelled in a more realistic and theory-consistent manner, is appropriate. Our argument is illustrated by comparing the results of introducing a positive demand stimulus in the UK economy using IO and CGE interregional models of Scotland and the rest of the UK. In the case of the latter, we demonstrate how more theory consistent modelling of both demand and supply side behaviour at the regional and national levels effect model results, including the impact on the interregional CO2 ‘trade balance’.

The Export Base Model with a Supply-Side Stimulus to the Export Sector

Paper delivered at the Western Regional Science Association Annual Conference, Sedona, Arizona, February, 2010.

Incorporating jurisdiction issues into regional carbon accounts under production and consumption accounting principles

Despite increased public interest, policymakers have been slow to enact targets based on limiting emissions under full consumption accounting measures (such as carbon footprints). This paper argues that this may be due to the fact that policymakers in one jurisdiction do not have control over production technologies used in other jurisdictions. The paper uses a regional input-output framework and data derived on carbon dioxide emissions by industry (and households) to examine regional accountability for emissions generation. In doing so, we consider two accounting methods that permit greater accountability of regional private and public (household and government) final consumption as the main driver of regional emissions generation, while retaining focus on the local production technology and consumption decisions that fall under the jurisdiction of regional policymakers. We propose that these methods permit an attribution of emissions generation that is likely to be of more use to regional policymakers than a full global footprint analysis.

“Policy Scepticism” and the Impact of Scottish Higher Education Institutions (HEIs) on their Host Region: Accounting for Regional Budget Constraints under Devolution

A “policy scepticism” has emerged that challenges the results of conventional regional HEI impact analyses. Its denial of the importance of the expenditure impacts of HEIs appears to be based on a belief in either a binding regional resource constraint or a regional public sector budget constraint. In this paper we provide a systematic critique of this policy scepticism. However, while rejecting the extreme form of policy scepticism, we argue that it is crucial to recognise the importance of the public-sector expenditure constraints that are binding under devolution. We show how conventional impact analyses can be augmented to accommodate regional public sector budget constraints. While our results suggest that conventional impact studies overestimate the expenditure impacts of HEIs, they also demonstrate that the policy scepticism that treats these expenditure effects as irrelevant neglects some key aspects of HEIs, in particular their export intensity.