11 resultados para water supply systems
em Université de Lausanne, Switzerland
Resumo:
Combining bacterial bioreporters with microfluidics systems holds great promise for in-field detection of chemical or toxicity targets. Recently we showed how Escherichia coli cells engineered to produce a variant of green fluorescent protein after contact to arsenite and arsenate can be encapsulated in agarose beads and incorporated into a microfluidic chip to create a device for in-field detection of arsenic, a contaminant of well known toxicity and carcinogenicity in potable water both in industrialized and developing countries. Cell-beads stored in the microfluidics chip at -20°C retained inducibility up to one month and we were able to reproducibly discriminate concentrations of 10 and 50 μg arsenite per L (the drinking water standards for European countries and the United States, and for the developing countries, respectively) from the blank in less than 200 minutes. We discuss here the reasons for decreasing bioreporter signal development upon increased storage of cell beads but also show how this decrease can be reduced, leading to a faster detection and a longer lifetime of the device.
Resumo:
The SAGUAPAC cooperative in the city of Santa Cruz de la Sierra (Eastern Bolivia) is regularly presented as an example of cooperative successes regarding water supply and sanitation. Its efficiency, both economic and technical, is widely considered as the main reason for its attractiveness. However, without denying its importance, we show, through a discourse analysis from and about SAGUAPAC in local media, that moral and non-instrumental factors are crucial in the reproduction of the cooperative. These factors create attachment and affection toward the cooperative, through a storytelling using a four-dimensional rhetoric (mythification, identification, emotionalisation and personification). This storytelling technique, internalized in the local media discourse and materializing the so-called new spirit of capitalism, exploits the affects and instrumentalisation of local myths and legends, as well as the 'camba' ethnic identity. In that, it tends to retain SAGUAPAC members and to canvass new ones, by providing them with recognition in their quality of local community members. However, the mobilisation of social norms and power hierarchies might end up reinforcing the social exclusion of Andean non-camba immigrants, inspite of an a priori inclusive and democratic organisation.
Resumo:
La station touristique représente un espace urbain consacré principalement au tourisme, tout en comprenant également une population résidente permanente. Du point de vue de la gestion des réseaux urbains de l'eau, cette caractéristique induit pour ce type de lieu des usages propres à tout espace urbain mais également des spécificités liées à la forte fluctuation saisonnière de la population résidente ou encore à la présence d'usages particuliers tels que l'irrigation des golfs, la production de neige artificielle ou le thermalisme. Dès lors, la planification de l'approvisionnement est délicate et peu prévisible. Ces difficultés sont renforcées par le fait que les concentrations temporelles de la demande coïncident généralement avec des périodes de stress hydrique notable. Dans le cas de stations balnéaires, les pics de fréquentation interviennent en général durant l'été lorsque la ressource en eau est peu disponible. Le problème est similaire dans les stations touristiques de montagne où l'eau est généralement indisponible car stockée sous forme de neige durant les mois de forte fréquentation. De plus, ces difficultés sont souvent renforcées par la localisation géographique des stations touristiques, fréquemment situées dans des espaces sensibles du point de vue de la ressource en eau, avec des situations de pénuries temporelles, voire structurelles. Ces problématiques propres à la plupart des stations touristiques mènent souvent à de fortes rivalités entre, d'une part, les différents usages touristiques de la ressource, et d'autre part, les usages autochtones et touristiques. Les particularités liées au tourisme tendent ainsi à renforcer les rivalités entre différents types de secteurs d'activité (approvisionnement en eau potable, tourisme, hydroélectricité, enneigement artificiel, irrigation, etc.). Ces différents usages de la ressource mis en concurrence nécessitent dès lors la mise en oeuvre de réglementations structurées à travers des politiques publiques ainsi que des droits de propriété et selon des composantes nationales, régionales et locales ; soit un cadre institutionnel que nous proposons d'appeler Régime Institutionnel de Ressource (RIR) (Knoepfel et al. 2001, 2007). A travers cette thèse de doctorat, nous répondons à différentes questions de recherche. Nous tentons d'abord de comprendre comment ces différents RIR sont-ils mis en oeuvre dans le cadre d'espaces touristiques ? Comment ceux-ci sont-ils concrétisés par les acteurs et quels sont leurs effets en termes de durabilité technique, environnementale, sociale et économique des réseaux urbains de l'eau ? Nous questionnons ensuite les effets du tourisme sur la gestion des infrastructures de réseau à l'échelle de la station touristique et de son bassin versant et nous interrogeons sur les effets du tourisme en termes de gestion des eaux urbaines. Nous portons notre attention sur deux stations touristiques situées dans deux contextes institutionnels différents (Crans-Montana en Suisse et Morzine-Avoriaz en France) et y étudions trois types de régimes institutionnels en particulier : la régie directe (gestion publique), l'affermage (gestion déléguée) et la gestion privée des infrastructures. Les résultats de cette thèse de doctorat indiquent tout d'abord dans quelle mesure le tourisme modifie de façon significative la perception et les modalités de gestion de la ressource en eau et des infrastructures. Ils montrent ensuite que l'espace fonctionnel de la gestion de ces infrastructures correspond rarement aux limites du réseau hydrographique naturel et quelles en sont les implications en termes de durabilité. Enfin, la comparaison de différents régimes institutionnels révèle les forces et les faiblesses de chaque modèle de gestion dans le cas spécifique des stations touristiques et également les différentes solutions adoptées localement pour la mise en oeuvre d'un arrangement institutionnel permettant un usage plus ou moins durable des infrastructures de réseau et du réseau hydrographique naturel. - Tourism resort represents an urban area mainly dedicated to tourism while including at the same time a permanent residential population. From the point of view of urban water networks, this characteristic induces a strong seasonal fluctuation of residential population and involves special water uses such as golf irrigation, production of artificial snow or functioning of thermal baths. Therefore, water supply planning can be tricky and difficult to predict. These difficulties are reinforced by the fact that temporary concentrations of water demand coïncidé generally with periods of water stress. In the case of seaside resorts, frequenting peaks arise in general during summer when water resource is less available. The problem is similar in mountainous tourist resorts where water is generally unavailable as it is stored as snow during months of highest frequenting. Furthermore, these difficulties are often reinforced by resorts' geographical localisations, which are often situated in sensitive areas in terms of temporary or structural water shortages. These problematic issues often lead to strong rivalries between tourists' water uses on the one hand, and between locals and tourists uses on the other hand. Thus, features of tourism tend to reinforce rivalries between different sectors of activity (supply of drinking water, tourism, hydroelectricity, artificial snow, irrigation, etc.). These different and competing water uses need the implementation of rules structured through public policies and property rights and through national, regional and local legal components; We propose to call this framework as an Institutional Resource Regime (IRR) (Knoepfel et al. 2001, 2007, 2009). Through this PhD thesis, we answer different research questions. We firstly aim to understand how those different IRR are implemented within tourism spaces? How do actors materialize them and what are their effects in term of technical, environmental, social and economical sustainability of urban water networks? We then, investigate effects of tourism on water networks infrastructures' management at the scale of the tourist resort and its river basin. We focus our attention on two tourist resorts situated within two different institutional contexts (Crans-Montana, Switzerland and Morzine-Avoriaz, France) and study three types of institutional regime in particular: public, delegated and private management of infrastructures. Results of this PhD thesis indicate firstly how tourism modifies in a significant way the perception and management modalities of water resource and infrastructures. Results also show that functional space of infrastructures management rarely matches with the limits of the natural river basin and indicates what it means in terms of sustainability. Finally, the comparison of different institutional regimes reveals the strengths and weakness of each management model in the specific case of tourist resorts and shows the different solutions in locally implementing an institutional arrangement for a more or less sustainable management of network infrastructures and natural water system.
Resumo:
RESUME en français Centrée sur le grand nymphée de Leptis Magna la recherche met en évidence l'évolution et la signification de ce monument des eaux dans l'une des plus importantes cités africaines de l'époque romaine en mettant en lumière trois thèmes principaux. L'étude historiographique permet tout d'abord d'appréhender, à l'aide des témoignages littéraires des siècles derniers et d'une abondante documentation d'archive, l'histoire de l'édifice de son ensablement à sa remise au jour, puis de suivre les différentes étapes de son dégagement et de sa restauration, mettant ainsi en relief la perception des divers observateurs à l'encontre du monument. L'étude urbanistique permet ensuite de dégager la signification de l'édifice dans la cité par rapport aux autres monuments du secteur aux différentes périodes de son histoire, ainsi que de reconstituer l'approvisionnement en eau de Leptis Magna. Enfin, l'étude architecturale s'intéresse à l'analyse détaillée des structures, permettant la mise en évidence de la conception initiale, du fonctionnement et des transformations du nymphée. Cette dernière approche, qui s'accompagne d'un catalogue circonstancié des éléments du décor, fait intervenir des considérations sur les techniques de constructions, le traitement des blocs d'ornementation et, d'une manière plus générale, sur ('économie du chantier. Cette recherche permet non seulement de reconstituer l'aspect, le rôle et l'histoire du monument et de le replacer dans la série des nymphées romains, mais aussi de percevoir son impact sur les habitants du lieu aux différents moments de son histoire, cherchant ainsi à rejoindre par l'archéologie des considérations sociologiques. THE GREAT SEVERAN NYMPHAEUM OF LEPTIS MAGNA: HISTORIOGRAPHICAL, URBANISTIC AND ARCHITECTURAL STUDY RESUME en anglais Based on the great nymphaeum of Leptis Magna, the research considers the development and significance of this water monument in one of the most important African cities of the Roman period, through three principal aspects. The historiographical study aboards the subject through literary testimony from the last centuries and an abundance of documentary archives, the history of the edifice from its burial to its reconstruction, studying the different stages of its unearthing and its restoration, thus pinpointing perspectives from various observers of the monument. The urban study divulges the significance of the edifice in the city, in comparison with other monuments in the region over different periods of its history, as well as reconstituting Leptis Magna's water supply. Finally, the architectural study undertakes a detailed analysis of the structures, which highlights the conception and the transformations of the nymphaeum, as well as its hydraulic functions. This architectural approach, which is accompanied by a detailed catalogue of the decorative elements, juxtaposes the technical considerations of construction with the ornamental treatment of the marble blocks, accounting for the economical aspects of the site of the nymphaeum. This research proposes not only a consideration of the appearance, the role and the history of the monument and situates it within the series of Roman nymphaea, but also the perception of its impact on the local inhabitants at different moments in its history, looking for accomplish by archaeology some sociological considerations.
Resumo:
Lake Geneva is one of the largest European lakes with a surface area of 580 km2. Its catchment area covers 7400 km2, of which approximately 20% is arable land. Monitoring campaigns have been carried out in 2004 and 2005 to determine the contamination of the lake by pesticides. The results highlight the widespread presence of herbicides in water, the measured concentrations for most substances remaining constant in 2004 and 2005. However, for some individual herbicides the concentrations increased drastically (e.g., the herbicide foramsulfuron). We assessed the environmental risk of the herbicides detected in the lake using water quality criteria recently determined for the Swiss environmental protection agency. Furthermore, we assessed the risk of herbicide mixtures, grouped based upon their mode of action. Generally, the risk estimated for all single substances is low, except for some sulfonylurea compounds. For these substances, the measured concentrations are higher than the predicted no-effect concentration. Impact on the flora of the lake can therefore not be excluded. When mixtures of pesticides with similar mode of action are taken into account, the risk remains lower than the mixture water quality criteria for all groups, but can reach as high as one third of this quality criteria. A further step would therefore be to assess the risk of the total pesticide mixture, including similar and dissimilar modes of action
Resumo:
Fossil biogenic phosphate of fast-growing primary bone tissue of dinosaurs can preserve a histologic and isotopic time-series of annual seasonality in temperature variations, similar to tooth enamel and other accretionary skeletal phases such as corals or wood. On two bone fragments from sympatric dinosaurs with different histologic patterns of bone growth, high-resolution oxygen isotope profiles were analyzed along the radial direction of bone growth. The investigated specimens are from the Jurassic Shishugou Formation in the Junggar Basin, NW China and have distinct patterns of compositional variation. A fibrolamellar dinosaur bone with multiple lines of arrested growth (LAGs) and periodic growth cycles of decreasing bone laminae thickness displays a cyclic intra-bone variation in delta(18)O values of about 2parts per thousand corresponding with the LAGs. These growth cycles in fast-growing fibrolamellar bone provide evidence for seasonal growth of dinosaurs in lower latitudes ( similar to 45degreesN), possibly influenced by a monsoon-type paleoclimate. Seasonal changes in temperature and water supply are consistent with the oxygen isotope composition measured in dinosaur bone phosphate as well as with growth rings in contemporaneous fossil conifer wood from the same locality. In contrast, a plexiform sympatric sauropod bone displays continuous growth, free of LAGs and has a lower intra-bone variation of less than or equal to 0.8parts per thousand. Differences in bone histology are also reflected in the oxygen isotopic composition and its intra-bone variability, indicating different physiological responses to external climatic stress between sympatric dinosaur species. Seasonal intra-bone oxygen isotope variations combined with bone histology may thus yield new insights into species-specific response to climatic stress and its influence on dinosaur growth, formation of growth marks, growth rates, as welt as dinosaur thermophysiology. (C) 2004 Elsevier B.V All rights reserved.
Resumo:
Development and environmental issues of small cities in developing countries have largely been overlooked although these settlements are of global demographic importance and often face a "triple challenge"; that is, they have limited financial and human resources to address growing environmental problems that are related to both development (e.g., pollution) and under-development (e.g., inadequate water supply). Neoliberal policy has arguably aggravated this challenge as public investments in infrastructure generally declined while the focus shifted to the metropolitan "economic growth machines". This paper develops a conceptual framework and agenda for the study of small cities in the global south, their environmental dynamics, governance and politics in the current neoliberal context. While small cities are governed in a neoliberal policy context, they are not central to neoliberalism, and their (environmental) governance therefore seems to differ from that of global cities. Furthermore, "actually existing" neoliberal governance of small cities is shaped by the interplay of regional and local politics and environmental situations. The approach of urban political ecology and the concept of rural-urban linkages are used to consider these socio-ecological processes. The conceptual framework and research agenda are illustrated in the case of India, where the agency of small cities in regard to environmental governance seems to remain limited despite formal political decentralization.
Resumo:
Contamination with arsenic is a recurring problem in both industrialized and developing countries. Drinking water supplies for large populations can have concentrations much higher than the permissible levels (for most European countries and the United States, 10 μg As per L; elsewhere, 50 μg As per L). Arsenic analysis requires high-end instruments, which are largely unavailable in developing countries. Bioassays based on genetically engineered bacteria have been proposed as suitable alternatives but such tests would profit from better standardization and direct incorporation into sensing devices. The goal of this work was to develop and test microfluidic devices in which bacterial bioreporters could be embedded, exposed and reporter signals detected, as a further step towards a complete miniaturized bacterial biosensor. The signal element in the biosensor is a nonpathogenic laboratory strain of Escherichia coli, which produces a variant of the green fluorescent protein after contact to arsenite and arsenate. E. coli bioreporter cells were encapsulated in agarose beads and incorporated into a microfluidic device where they were captured in 500 × 500 μm(2) cages and exposed to aqueous samples containing arsenic. Cell-beads frozen at -20 °C in the microfluidic chip retained inducibility for up to a month and arsenic samples with 10 or 50 μg L(-1) could be reproducibly discriminated from the blank. In the 0-50 μg L(-1) range and with an exposure time of 200 minutes, the rate of signal increase was linearly proportional to the arsenic concentration. The time needed to reliably and reproducibly detect a concentration of 50 μg L(-1) was 75-120 minutes, and 120-180 minutes for a concentration of 10 μg L(-1).
Resumo:
River regulation for the purposes of public water supply causes the flow regime downstream of a dam to change. Traditionally, in the UK, such regulation was accompanied by requirements for reservoir releases to compensate downstream water users (e.g. industry) for the loss of natural flow (compensation flows). In this article, we compare a unique pre-impoundment macroinvertebrate data set for a regulated upland river with survey data post-impoundment. This allows a longitudinal assessment of the response of the system to regulation. The Derwent River, Northumberland, was impounded in 1966. Impacts on the hydrological regime were quantified by comparing long-term hydrographs, flow duration curves, flow ranges and flashiness indices for the pre-impoundment and post-impoundment periods. The comparison of changes in macroinvertebrate richness and diversity post-impoundment showed that the change in flow regime has had limited effect on the ecological community structure. The flow regime of the Derwent River has become less flashy with fewer extreme events, and the richness and the diversity of macroinvertebrates have, in some cases, increased and at worst have not deteriorated. We suggest that this reflects the strict compensation regime, which has guaranteed minimum flows at all times. Copyright (c) 2012 John Wiley & Sons, Ltd.
Resumo:
The motivation for this research initiated from the abrupt rise and fall of minicomputers which were initially used both for industrial automation and business applications due to their significantly lower cost than their predecessors, the mainframes. Later industrial automation developed its own vertically integrated hardware and software to address the application needs of uninterrupted operations, real-time control and resilience to harsh environmental conditions. This has led to the creation of an independent industry, namely industrial automation used in PLC, DCS, SCADA and robot control systems. This industry employs today over 200'000 people in a profitable slow clockspeed context in contrast to the two mainstream computing industries of information technology (IT) focused on business applications and telecommunications focused on communications networks and hand-held devices. Already in 1990s it was foreseen that IT and communication would merge into one Information and communication industry (ICT). The fundamental question of the thesis is: Could industrial automation leverage a common technology platform with the newly formed ICT industry? Computer systems dominated by complex instruction set computers (CISC) were challenged during 1990s with higher performance reduced instruction set computers (RISC). RISC started to evolve parallel to the constant advancement of Moore's law. These developments created the high performance and low energy consumption System-on-Chip architecture (SoC). Unlike to the CISC processors RISC processor architecture is a separate industry from the RISC chip manufacturing industry. It also has several hardware independent software platforms consisting of integrated operating system, development environment, user interface and application market which enables customers to have more choices due to hardware independent real time capable software applications. An architecture disruption merged and the smartphone and tablet market were formed with new rules and new key players in the ICT industry. Today there are more RISC computer systems running Linux (or other Unix variants) than any other computer system. The astonishing rise of SoC based technologies and related software platforms in smartphones created in unit terms the largest installed base ever seen in the history of computers and is now being further extended by tablets. An underlying additional element of this transition is the increasing role of open source technologies both in software and hardware. This has driven the microprocessor based personal computer industry with few dominating closed operating system platforms into a steep decline. A significant factor in this process has been the separation of processor architecture and processor chip production and operating systems and application development platforms merger into integrated software platforms with proprietary application markets. Furthermore the pay-by-click marketing has changed the way applications development is compensated: Three essays on major trends in a slow clockspeed industry: The case of industrial automation 2014 freeware, ad based or licensed - all at a lower price and used by a wider customer base than ever before. Moreover, the concept of software maintenance contract is very remote in the app world. However, as a slow clockspeed industry, industrial automation has remained intact during the disruptions based on SoC and related software platforms in the ICT industries. Industrial automation incumbents continue to supply systems based on vertically integrated systems consisting of proprietary software and proprietary mainly microprocessor based hardware. They enjoy admirable profitability levels on a very narrow customer base due to strong technology-enabled customer lock-in and customers' high risk leverage as their production is dependent on fault-free operation of the industrial automation systems. When will this balance of power be disrupted? The thesis suggests how industrial automation could join the mainstream ICT industry and create an information, communication and automation (ICAT) industry. Lately the Internet of Things (loT) and weightless networks, a new standard leveraging frequency channels earlier occupied by TV broadcasting, have gradually started to change the rigid world of Machine to Machine (M2M) interaction. It is foreseeable that enough momentum will be created that the industrial automation market will in due course face an architecture disruption empowered by these new trends. This thesis examines the current state of industrial automation subject to the competition between the incumbents firstly through a research on cost competitiveness efforts in captive outsourcing of engineering, research and development and secondly researching process re- engineering in the case of complex system global software support. Thirdly we investigate the industry actors', namely customers, incumbents and newcomers, views on the future direction of industrial automation and conclude with our assessments of the possible routes industrial automation could advance taking into account the looming rise of the Internet of Things (loT) and weightless networks. Industrial automation is an industry dominated by a handful of global players each of them focusing on maintaining their own proprietary solutions. The rise of de facto standards like IBM PC, Unix and Linux and SoC leveraged by IBM, Compaq, Dell, HP, ARM, Apple, Google, Samsung and others have created new markets of personal computers, smartphone and tablets and will eventually also impact industrial automation through game changing commoditization and related control point and business model changes. This trend will inevitably continue, but the transition to a commoditized industrial automation will not happen in the near future.