Characterization and monitoring of the Åknes landslide using terrestrial laser scanning

Terrestrial laser scanning (TLS) provides high-resolution point clouds of the topography and new TLS instruments with ranges exceeding 300 m or even 1000 m are powerful tools for characterizing and monitoring slope movements. This study focuses on the 35 million m3 Åknes rockslide in Western Norway, which is one of the most investigated and monitored rockslides in the world. The TLS point clouds are used for the structural analysis of the steep, inaccessible main scarp of the rockslide, including an assessment of the discontinuity sets and fold axes. TLS acquisitions in 2006, 2007 and 2008 provide information on 3-D displacements for the entire scanned area and are not restricted like conventional survey instruments to single measurement points. The affine transformation matrix between two TLS acquisitions precisely describes the rockslide displacements and enables their separation into translational components, such as the displacement velocity and direction, and rotational components, like toppling. This study shows the ability of TLS to obtain reliable 3-D displacement information over a large, unstable area. Finally, a possible instability model for the upper part of Åknes rockslide explains the measured translational and rotational displacements by a combination of southward planar sliding along the gneiss foliation, gravitational vertical settlement along the complex, stepped basal sliding surface and northward toppling toward the opened graben structure.

Laparoscopic inguinal hernia repair with extraperitoneal double-mesh technique.

Totally extraperitoneal laparoscopic hernia repair is an efficient but technically demanding procedure. As mechanisms of hernia recurrence may be related to these technical difficulties, we have modified a previously described double-mesh technique in an effort to simplify the procedure. Extraperitoneal laparoscopic hernia repairs were performed in 82 male and 17 female patients having inguinal, femoral, and recurrent bilateral hernias. A standard propylene mesh measuring 15 x 15 cm was cut into two pieces of 4 x 15 cm and 11 x 15 cm. The smaller mesh was placed over both inguinal rings without splitting. The larger mesh was then inserted over the first mesh and stapled to low-risk zones, reinforcing the large-vessel area and the nerve transition zone. The mean procedure duration was 60 minutes for unilateral and 100 minutes for bilateral hernia repair. Patients were discharged from the hospital within 48 hours. The mean postoperative follow-up was 22 months, with no recurrences, neuralgia, or bleeding complications. Over a 2-year period, this technique was found to be satisfactory without recurrences or significant complications. In our hands, this technique was easier to perform: it allows for a less than perfect positioning of the meshes and avoids most of the stapling to crucial zones.

Limited genetic diversity and high differentiation among the remnant adder (Vipera berus) populations in the Swiss and French Jura Mountains

Although the adder (Vipera berus) has a large distribution area, this species is particularly threatened in Western Europe due to high habitat fragmentation and human persecution. We developed 13 new microsatellite markers in order to evaluate population structure and genetic diversity in the Swiss and French Jura Mountains, where the species is limited to only a few scattered populations. We found that V. berus exhibits a considerable genetic differentiation among populations (global F-ST = 0.269), even if these are not geographically isolated. Moreover, the genetic diversity within populations in the Jura Mountains and in the less perturbed Swiss Alps is significantly lower than in other French populations, possibly due to post-glacial recolonisation processes. Finally, in order to minimize losses of genetic diversities within isolated populations, suggestions for the conservation of this species in fragmented habitats are proposed.

Regional deterministic characterization of fracture networks and its application to GIS-based rock fall risk assessment

The study investigates the possibility to incorporate fracture intensity and block geometry as spatially continuous parameters in GIS-based systems. For this purpose, a deterministic method has been implemented to estimate block size (Bloc3D) and joint frequency (COLTOP). In addition to measuring the block size, the Bloc3D Method provides a 3D representation of the shape of individual blocks. These two methods were applied using field measurements (joint set orientation and spacing) performed over a large field area, in the Swiss Alps. This area is characterized by a complex geology, a number of different rock masses and varying degrees of metamorphism. The spatial variability of the parameters was evaluated with regard to lithology and major faults. A model incorporating these measurements and observations into a GIS system to assess the risk associated with rock falls is proposed. The analysis concludes with a discussion on the feasibility of such an application in regularly and irregularly jointed rock masses, with persistent and impersistent discontinuities.

A new concept of integrated cardiopulmonary bypass circuit.

OBJECTIVE: Standard cardiopulmonary bypass (CPB) circuits with their large surface area and volume contribute to postoperative systemic inflammatory reaction and hemodilution. In order to minimize these problems a new approach has been developed resulting in a single disposable, compact arterio-venous loop, which has integral kinetic-assist pumping, oxygenating, air removal, and gross filtration capabilities (CardioVention Inc., Santa Clara, CA, USA). The impact of this system on gas exchange capacity, blood elements and hemolysis is compared to that of a conventional circuit in a model of prolonged perfusion. METHODS: Twelve calves (mean body weight: 72.2+/-3.7 kg) were placed on cardiopulmonary bypass for 6 h with a flow of 5 l/min, and randomly assigned to the CardioVention system (n=6) or a standard CPB circuit (n=6). A standard battery of blood samples was taken before bypass and throughout bypass. Analysis of variance was used for comparison. RESULTS: The hematocrit remained stable throughout the experiment in the CardioVention group, whereas it dropped in the standard group in the early phase of perfusion. When normalized for prebypass values, both profiles differed significantly (P<0.01). Both O2 and CO2 transfers were significantly improved in the CardioVention group (P=0.04 and P<0.001, respectively). There was a slightly higher pressure drop in the CardioVention group but no single value exceeded 112 mmHg. No hemolysis could be detected in either group with all free plasma Hb values below 15 mg/l. Thrombocyte count, when corrected by hematocrit and normalized by prebypass values, exhibited an increased drop in the standard group (P=0.03). CONCLUSION: The CardioVention system with its concept of limited priming volume and exposed foreign surface area, improves gas exchange probably because of the absence of detectable hemodilution, and appears to limit the decrease in the thrombocyte count which may be ascribed to the reduced surface. Despite the volume and surface constraints, no hemolysis could be detected throughout the 6 h full-flow perfusion period.

The UEFA EURO 2012 anti-doping programme - scientific review

The final tournament of the UEFA European Football Championship is one of the top sporting events in the world, and a high-profile event of this kind requires a well-planned and well-executed anti-doping programme to ensure the integrity of results in the competition. UEFA EURO 2012 presented a unique logistical challenge, with the tournament spread across two countries, both covering a large geographical area. This paper discusses the planning and delivery of both the pre tournament out-of-competition (OOC) testing programme and the in-competition (IC) programme, as well as reviewing the activities of doping control officers (DCOs), the whereabouts programme and assessing the sample collection and transport process. The analytical approach applied is also discussed, along with an overview of the distribution of T/E ratios and blood parameters.

Phylogéographie des principales vipères européennes (Vipera ammodytes, V. aspis et V. berus), structuration génétique et multipaternité chez Vipera berus

Résumé: Les vipères du genre Vipera sont des serpents venimeux distribués dans la totalité du Paléarctique. Malgré cette répartition considérable, elles sont extrêmement menacées, leur déclin étant principalement dû à la destruction et à la fragmentation de leur habitat ainsi qu'à la persécution humaine. Afin d'apporter de nouveaux éléments dans le contexte de la protection de ce groupe de reptiles, nous avons utilisé durant ce travail de thèse différents marqueurs moléculaires pour étudier la structuration génétique à petite et à large échelle chez trois espèces appartenant au genre Vipera. La première étude, une phylogéographie moléculaire de la vipère ammodytes (Vipera ammodytes), a montré dans l'ensemble de l'aire de répartition une forte structuration génétique provenant d'isolements antérieures au Pléistocène. La présence d'un nombre important de clades dans le centre des Balkans suggère que cette région a fourni de nombreux refuges isolés durant les glaciations. Ces dernières ont également eu un impact considérable sur la diversité génétique au sein de la majorité des clades, suite à d'importants goulots d'étranglement durant le Pléistocène. L'étude de la phylogéographie de la vipère aspic (Vipera aspis) a montré une différenciation génétique entre les populations présentes de chaque côté des Alpes, mais également une forte structuration interne avec la mise en évidence d'un refuge en France. Cette étude est la première à établir clairement l'utilisation d'un refuge français pour un vertébré terrestre. La troisième partie de cette thèse a étudié la phylogéographie de la vipère péliade (Vipera berus), espèce cible de ce travail. En plus de la mise en évidence d'un groupe génétique inattendu (localisé dans le nord de l'Italie, le sud de l'Autriche, le nord de la Slovénie et l'extrême sud-est de la Suisse), la variabilité génétique au sein du groupe nordique (comprenant les animaux de l'entier de l'aire de répartition de l'espèce à l'exception des individus du groupe italien et les animaux provenant des Balkans) est suffisamment importante pour conclure à l'utilisation de refuges glaciaires nordiques durant les dernières glaciations, en complément des refuges habituellement décrits pour la majorité des espèces animales (soit les péninsules ibérique, italienne et balakanique). Ces résultats nous ont conduit à effectuer une étude morphologique (quatrième partie) comparant les vipères péliades du "clade italien" et du "clade nordique" décrits ci-dessus. Seules de petites différences morphologiques ont pu être mises en évidence, malgré une séparation de ces groupes estimée à plus d'un million d'années. Une étude à plus petite échelle, centrée sur le Massif jurassien et certaines populations alpines et françaises, a été entreprise afin d'estimer leur diversité génétique et d'évaluer la structuration génétique entre les populations à l'aide de marqueurs microsatellites (cinquième partie). Une importante structuration a été observée entre les populations distantes de plus de 3 kilomètres, la structuration entre les populations plus proches étant plus limitée. De plus, une diversité génétique plus faible dans les populations jurassiennes et alpines comparativement aux populations du massif central et de la côte atlantique a été constatée, probablement due à une perte de diversité génétique lors de la recolonisation post-glaciaire. La sixième étude s'est intéressée au succès reproducteur des mâles de vipères péliades en conditions naturelles. Une corrélation entre la taille des mâles et leur succès reproducteur a été relevée, les individus de plus grande taille ayant un succès reproducteur plus élevé. Le taux de multipaternité a aussi été investigué, démontrant que la proportion de pontes issues de plusieurs pères est élevée (69%) malgré la faible densité de vipères observée sur le site étudié. Finalement, aucun lien entre le nombre de pères au sein d'une ponte et la mortalité des jeunes à la naissance n'a pu être mis en évidence, contrastant avec des travaux précédents. En conclusion, l'observation de la structuration très marquée chez les vipères péliades devrait permettre d'affiner les méthodes de protection de l'espèce dans le massif jurassien. A plus large échelle, l'importante structuration génétique observée chez les vipères ammodytes, aspic et péliade résultant de l'utilisation de nombreux refuges glaciaires, complémentaires aux refuges habituellement utilisés par les espèces animales, démontre l'intérêt de l'analyse phylogéographique des reptiles pour la compréhension des phénomènes de colonisation et d' extinction des populations durant la fin du Tertiaire et le Quaternaire. La mise en évidence chez les différentes espèces de vipères étudiées de nombreux groupes génétiques distincts (ESUs) devrait conduire à des modifications de la taxonomie ainsi qu'au statut de protection de ces espèces. Abstract: The vipers of the genus Vipera are venomous snakes widespread throughout the Palaearctic regions. Despite a large distribution area, several species are extremely threatened, especially due to the destruction and fragmentation of their habitats, as well as by human persecution. In order to increase the knowledge on these species and to improve their protection, several molecular markers have been used to investigate the genetic structure on small and large scales, within three species of the genus Vipera. The first study, a molecular phylogeography of the nose-horned viper (Vipera ammodytes), showed a considerable structuring throughout the distribution area, due to isolation into refugia before the Pleistocene. A high number of clades in the centre of the Balkans suggests that this region harboured numerous isolated glacial refugia during the last glaciation. Moreover, low genetic diversity within several clades implies that most populations of nose-horned vipers have suffered bottlenecks during the Pleistocene. The study of the phylogeography of the asp viper (Vipera aspis) showed genetic differentiation between populations on each side of the Alps, as well as considerable internal genetic structure, suggesting the use of a glacial refugium in France. This study is the first to establish firmly the occurrence of a French refugia for a terrestrial vertebrate. The third part of this work involved a phylogeographic study of the adder (Vipera berus), the target species of this thesis. Three clades were revealed: a Balkan clade (corresponding to the subspecies V. b. sachalinensis), an unexpected Italian clade (limited to northern Italy, southern Austria, northern Slovenia and southeasternmost corner of Switzerland) and a Northern clade clade (including adders of the whole distribution area excepted animals from the Balkan and the Italian clades). The genetic variability within the Northern clade is sufficiently high to conclude that a northern glacial refugia during the last glaciation, in addition to those refugia already described for the main species (Iberian, Italian and Balkan peninsula). These results motivated a morphological study (part four) comparing the adders from the Italian and the Northern clades describe above. Only small morphological differences have been found, despite the split between these two clades have taken place more than 1 million years ago. A study on a local scale, focused on the Jura Mountains, on a few populations in the Alps and France was, performed to estimate the genetic diversity and the genetic structure between populations using microsatellite markers (part five). Considerable structure was observed between populations separated by more than 3 kilometres, whereas the structure between closer populations is less marked. Moreover, lower genetic diversity in the populations from Jura Mountains and Alps was noticed compared to populations from Massif Central of Atlantic coast. Such loss of genetic variation probably followed post-glacial recolonisation. The sixth study focused on the reproductive success of male adders in the wild. A positive correlation between body length and reproductive success was observed. Multiple paternity was also observed in most of clutches (69%) despite the low density of adders in the study area. Finally, no relationship was found between the number of fathers in a clutch and the survival of offspring at birth, contradicting previous studies. To conclude, the observation of a significant genetic structure in Vipera berus will enable recommendations to be made to improve protection of this species in the Jura Mountain. On a larger scale, the considerable genetic structure found within Vipera ammdoytes, V. aspis and V. berus, resulting from isolation in additional glacial refugia to those already described for other species, demonstrates the relevance of phylogeographic studies of reptiles to better understand the colonisation and disappearance during the last Tertiary and the Quaternary. The observation of several groups of evolutionary significant units (ESUs) within the three studied species might lead to a revision of the taxonomy, as well as their conservation status.

Risk assessment of herbicide mixtures in a large European lake

Lake Geneva is one of the largest European lakes with a surface area of 580 km2. Its catchment area covers 7400 km2, of which approximately 20% is arable land. Monitoring campaigns have been carried out in 2004 and 2005 to determine the contamination of the lake by pesticides. The results highlight the widespread presence of herbicides in water, the measured concentrations for most substances remaining constant in 2004 and 2005. However, for some individual herbicides the concentrations increased drastically (e.g., the herbicide foramsulfuron). We assessed the environmental risk of the herbicides detected in the lake using water quality criteria recently determined for the Swiss environmental protection agency. Furthermore, we assessed the risk of herbicide mixtures, grouped based upon their mode of action. Generally, the risk estimated for all single substances is low, except for some sulfonylurea compounds. For these substances, the measured concentrations are higher than the predicted no-effect concentration. Impact on the flora of the lake can therefore not be excluded. When mixtures of pesticides with similar mode of action are taken into account, the risk remains lower than the mixture water quality criteria for all groups, but can reach as high as one third of this quality criteria. A further step would therefore be to assess the risk of the total pesticide mixture, including similar and dissimilar modes of action

Inheritance of ductile and brittle structures in the development of large rock slope instabilities: Examples from western Norway

The high density of slope failures in western Norway is due to the steep relief and to the concentration of various structures that followed protracted ductile and brittle tectonics. On the 72 investigated rock slope instabilities, 13 were developed in soft weathered mafic and phyllitic allochthons. Only the intrinsic weakness of such rocks increases the susceptibility to gravitational deformation. In contrast, the gravitational structures in the hard gneisses reactivate prominent ductile or/and brittle fabrics. At 30 rockslides along cataclinal slopes, weak mafic layers of foliation are reactivated as basal planes. Slope-parallel steep foliation forms back-cracks of unstable columns. Folds are specifically present in the Storfjord area, together with a clustering of potential slope failures. Folding increases the probability of having favourably orientated planes with respect to the gravitational forces and the slope. High water pressure is believed to seasonally build up along the shallow-dipping Caledonian detachments and may contribute to destabilization of the rock slope upwards. Regional cataclastic faults localized the gravitational structures at 45 sites. The volume of the slope instabilities tends to increase with the amount of reactivated prominent structures and the spacing of the latter controls the size of instabilities.

Garnet growth in the Nufenen Pass area (Swiss Alps)

Abstract : Textural division of a mineral in pyramids, with their apices located at the centre of the mineral and their bases corresponding to the mineral faces is called textural sector zoning. Textural sector zoning is observed in many metamorphic minerals like andalousite and garnet. Garnets found in the graphite rich black shales of the Mesozoic cover of the Gotthard Massif display textural sector zoning. The morphology of this sector zoning is not the same in different types of black shales observed in the Nufenen pass area. Garnets in foliated black shales display a well developed sector zoning while garnets found in cm-scale layered black shales display well developed sectors in the direction of the schistosity plane. This sector zoning is always associated with up to 30μm sized birefringent lamellae emanating radial from the sector boundaries. They alternate with isotrope lamellae. The garnet forming reaction was determined using singular value decomposition approach and results compared to thermodynamic calculations. It is of the form chl + mu + cc + cld = bt + fds + ank + gt + czo and is similar in both layered and foliated black shales. The calculated X(O) is close to 0.36 and does not significantly vary during the metamorphic history of the rock. This corresponds to X CO2, X CH4, and X H2O BSE imaging of garnets on oriented-cuts revealed that the orientation of the lamellae found within the sectors is controlled by crystallography. BSE imaging and electron microprobe analysis revealed that these lamellae are calcium rich compared to the isotropic lamellae. The addition of Ca to an almandine rich garnet causes a small distortion of the X site and potentially, ordering. Ordered and disordered garnet might have very similar free energies for this composition. Hence, two garnets with different composition can be precipitated with minor overstepping of the reaction. It is enough that continued nucleation of a new garnet layer slightly prefers the same structure to assure a fiber-like growth of both garnet compositions side by side. This hypothesis is in agreement with the thermodynamic properties of the garnet solid solution described in the literature and could explain the textures observed in garnets with these compositions. To understand the differences in sector zoning morphology, and crystal growth kinetics, crystal size distribution were determined in several samples using 2D spatial analysis of slab surfaces. The same nucleation rate law was chosen for all cases. Different growth rate law for non-layered black shales and layered black shales were used. Garnet in layered black shales grew according to a growth rate law of the form R=kt ½. The transport of nutrient is the limiting factor. Transport will occur preferentially on the schistosity planes. The shapes of the garnets in such rocks are therefore ovoid with the longest axis parallel to the schistosity planes. Sector zoning is less developed with sectors present only parallel to the schistosity planes. Garnet in non-layered blackshales grew according to a growth rate law of the form R=kt. The limiting factor is the attachment at the surface of the garnet. Garnets in these rocks will display a well developed sector zoning in all directions. The growth rate law is thus influenced by the texture of the rock. It favours or hinders the transport of nutrient to the mineral surface. Résumé : La zonation sectorielle texturale consiste en la division d'un cristal en pyramides dont les sommets sont localisés au centre du minéral. La base de ces pyramides correspond aux faces du minéral. Ce type de zonation est fréquemment observé dans les minéraux métamorphiques tels que l'andalousite ou le grenat. Les grenats présents dans les marnes riches en graphites de la couverture Mésozoïque du Massif du Gotthard présent une zonation sectorielle texturale. La morphologie de cette zonation n'est pas la même dans les marnes litées et dans les marnes foliées. Les grenats des marnes foliées montrent des secteurs bien développés dans 3 directions. Les grenats des marnes litées montrent des secteurs développés uniquement dans la direction des plans de schistosité. Cette zonation sectorielle est toujours associée à des lamelles biréfringentes de quelques microns de large qui partent de la limite des secteurs et qui sont perpendiculaires aux faces du grenat. Ces lamelles alternent avec des lamelles isotropes. La réaction de formation du grenat a été déterminée par calcul matriciel et thermodynamique. La réaction est de la forme chl + mu + cc + cld= bt + fds + ank + gt + czo. Elle est similaire dans les roches litées et dans les roches foliées. L'évaluation des conditions fluides montrent que le X(O) est proche de 0.36 et ne change pas de façon significative durant l'histoire métamorphique de la roche. Des images BSE sur des coupes orientées ont révélé que l'orientation de lamelles biréfringentes est contrôlée parla crystallographie. La comparaison des analyses à la microsonde électronique et des images BSE révèle également que les lamelles biréfringentes sont plus riches en calcium que les lamelles isotropes. L'addition de calcium va déformer légèrement le site X et ainsi créer un ordre sur ce site. L'énergie interne d'un grenat ordré et d'un grenat désordonné sont suffisamment proches pour qu'un léger dépassement de l'énergie de la réaction de formation permette la coexistence des 2 types de grenat dans le même minéral. La formation de lamelles est expliquée par le fait qu'un grenat préférera la même structure. Ces observations sont en accord avec la thermodynamique des solutions solides du grenat et permet d'expliquer les structures similaires observées dans des grenats provenant de lithologies différentes. Une étude de la distribution des tailles des grenats et une modélisation de la croissance a permis de mettre en évidence 2 mécanismes de croissance différents suivant la texture de la roche. Dans les 2 cas, la loi de nucléation est la même. Dans les roches litées, la loi de croissance est de forme R=kt½. Le transport des nutriments est le facteur limitant. Ce transport a lieu préférentiellement dans la direction des niveaux de schistosité. Les grenats ont une forme légèrement allongée car la croissance des secteurs est facilitée sur les niveaux de schistosité. La croissance des grenats dans les roches foliées suit une loi de croissance de la forme R=kt. Les seuls facteurs limitant la croissance sont les processus d'attachement à la surface du grenat. La loi de croissance de ces grenats est donc contrainte par la texture de la roche. Cela se marque par des différences dans la morphologie de la zonation sectorielle.

THE USE OF SIMULATIONS IN EVOLUTIONARY POPULATION GENETICS: APPLICATIONS ON HUMANS, OWLS AND VIRTUAL ORGANISMS

Summary (in English) Computer simulations provide a practical way to address scientific questions that would be otherwise intractable. In evolutionary biology, and in population genetics in particular, the investigation of evolutionary processes frequently involves the implementation of complex models, making simulations a particularly valuable tool in the area. In this thesis work, I explored three questions involving the geographical range expansion of populations, taking advantage of spatially explicit simulations coupled with approximate Bayesian computation. First, the neutral evolutionary history of the human spread around the world was investigated, leading to a surprisingly simple model: A straightforward diffusion process of migrations from east Africa throughout a world map with homogeneous landmasses replicated to very large extent the complex patterns observed in real human populations, suggesting a more continuous (as opposed to structured) view of the distribution of modern human genetic diversity, which may play a better role as a base model for further studies. Second, the postglacial evolution of the European barn owl, with the formation of a remarkable coat-color cline, was inspected with two rounds of simulations: (i) determine the demographic background history and (ii) test the probability of a phenotypic cline, like the one observed in the natural populations, to appear without natural selection. We verified that the modern barn owl population originated from a single Iberian refugium and that they formed their color cline, not due to neutral evolution, but with the necessary participation of selection. The third and last part of this thesis refers to a simulation-only study inspired by the barn owl case above. In this chapter, we showed that selection is, indeed, effective during range expansions and that it leaves a distinguished signature, which can then be used to detect and measure natural selection in range-expanding populations. Résumé (en français) Les simulations fournissent un moyen pratique pour répondre à des questions scientifiques qui seraient inabordable autrement. En génétique des populations, l'étude des processus évolutifs implique souvent la mise en oeuvre de modèles complexes, et les simulations sont un outil particulièrement précieux dans ce domaine. Dans cette thèse, j'ai exploré trois questions en utilisant des simulations spatialement explicites dans un cadre de calculs Bayésiens approximés (approximate Bayesian computation : ABC). Tout d'abord, l'histoire de la colonisation humaine mondiale et de l'évolution de parties neutres du génome a été étudiée grâce à un modèle étonnement simple. Un processus de diffusion des migrants de l'Afrique orientale à travers un monde avec des masses terrestres homogènes a reproduit, dans une très large mesure, les signatures génétiques complexes observées dans les populations humaines réelles. Un tel modèle continu (opposé à un modèle structuré en populations) pourrait être très utile comme modèle de base dans l'étude de génétique humaine à l'avenir. Deuxièmement, l'évolution postglaciaire d'un gradient de couleur chez l'Effraie des clocher (Tyto alba) Européenne, a été examiné avec deux séries de simulations pour : (i) déterminer l'histoire démographique de base et (ii) tester la probabilité qu'un gradient phénotypique, tel qu'observé dans les populations naturelles puisse apparaître sans sélection naturelle. Nous avons montré que la population actuelle des chouettes est sortie d'un unique refuge ibérique et que le gradient de couleur ne peux pas s'être formé de manière neutre (sans l'action de la sélection naturelle). La troisième partie de cette thèse se réfère à une étude par simulations inspirée par l'étude de l'Effraie. Dans ce dernier chapitre, nous avons montré que la sélection est, en effet, aussi efficace dans les cas d'expansion d'aire de distribution et qu'elle laisse une signature unique, qui peut être utilisée pour la détecter et estimer sa force.

"We do have space in Lausanne. We have a large cemetery": The non-controversy of a non-existent Muslim burial ground

In the context of the administration of spaces assigned by municipalities for the burial of the dead, this article provides a critical analysis of the techniques for the governance of political collectives of citizens implemented by public authorities. More broadly, this article shows how funerary practices (i.e. the social practices surrounding death-the rituals, the legislation, etc.) can be used to develop a critical reading of the social relations that structure the social production of space. To this end, the authors use the conceptual tools provided by critical legal geography to explore the controversy surrounding the development of a 'carré confessionnel' (denominational area) within the Bois-de-Vaux Cemetery in Lausanne, Switzerland. Here, a focus on the techniques that allow 'nomosphere' technicians to convene a subset of the citizens within the public space reveals the administration of cemeteries as a means of governance, a method for mobilising bodies and a paradoxical means of managing flux.

Large fluctuations in the disassembly rate of microtubules revealed by atomic force microscopy.

Atomic force microscopy (AFM) in situ has been used to observe the cold disassembly dynamics of microtubules at a previously unrealised spatial resolution. Microtubules either electrostatically or covalently bound to aminosilane surfaces disassembled at room temperature under buffer solutions with no free tubulin present. This process was followed by taking sequential tapping-mode AFM images and measuring the change in the microtubule end position as a function of time, with an spatial accuracy down to +/-20nm and a temporal accuracy of +/-1s. As well as giving average disassembly rates on the order of 1-10 tubulin monomers per second, large fluctuations in the disassembly rate were revealed, indicating that the process is far from smooth and linear under these experimental conditions. The surface bound rates measured here are comparable to the rates for GMPCPP-tubulin microtubules free in solution, suggesting that inhibition of tubulin curvature through steric hindrance controls the average, relatively low disassembly rate. The large fluctuations in this rate are thought to be due to multiple pathways in the kinetics of disassembly with differing rate constants and/or stalling due to defects in the microtubule lattice. Microtubules that were covalently bound to the surface left behind the protofilaments covalently cross-linked to the aminosilane via glutaraldehyde during the disassembly process. Further work is needed to quantitatively assess the effects of surface binding on protofibril disassembly rates, reveal any differences in disassembly rates between the plus and minus ends and to enable assembly as well as disassembly to be imaged in the microscope fluid cell in real-time.

Functional dynamics of PDZ binding domains: a normal-mode analysis.

Postsynaptic density-95/disks large/zonula occludens-1 (PDZ) domains are relatively small (80-120 residues) protein binding modules central in the organization of receptor clusters and in the association of cellular proteins. Their main function is to bind C-terminals of selected proteins that are recognized through specific amino acids in their carboxyl end. Binding is associated with a deformation of the PDZ native structure and is responsible for dynamical changes in regions not in direct contact with the target. We investigate how this deformation is related to the harmonic dynamics of the PDZ structure and show that one low-frequency collective normal mode, characterized by the concerted movements of different secondary structures, is involved in the binding process. Our results suggest that even minimal structural changes are responsible for communication between distant regions of the protein, in agreement with recent NMR experiments. Thus, PDZ domains are a very clear example of how collective normal modes are able to characterize the relation between function and dynamics of proteins, and to provide indications on the precursors of binding/unbinding events.

Direct simulation of interface dynamics: linking capillary pressure, interfacial area and surface energy

We perform direct numerical simulations of drainage by solving Navier- Stokes equations in the pore space and employing the Volume Of Fluid (VOF) method to track the evolution of the fluid-fluid interface. After demonstrating that the method is able to deal with large viscosity contrasts and to model the transition from stable flow to viscous fingering, we focus on the definition of macroscopic capillary pressure. When the fluids are at rest, the difference between inlet and outlet pressures and the difference between the intrinsic phase average pressure coincide with the capillary pressure. However, when the fluids are in motion these quantities are dominated by viscous forces. In this case, only a definition based on the variation of the interfacial energy provides an accurate measure of the macroscopic capillary pressure and allows separating the viscous from the capillary pressure components.