The Use of Passive Samplers to Reveal Industrial and Agricultural Pollution Trends in Swiss Rivers

This study shows the efficiency of passive sampling to reveal industrial and agricultural pollution trends. Two practical applications for nonpolar and polar contaminants are presented. Low-density polyethylene (LDPE) samplers were deployed for one year in the Venoge River (VD) to monitor indicator PCBs (iPCBs, IUPAC nos. 28, 52, 101, 138, 153 and 180). The results showed that the impact of PCB emissions into the river is higher in summer than in other seasons due to the low flow rate of the river during this period. P,olar organic chemical integrative samplers (POCIS) were deployed for 4 months in the Sion-Riddes canal (VS) to investigate herbicides (terbuthylazine, diuron and linuron). Desisopropylatrazine-d5 (DIA-d5) was tested as a performance reference compound (PRC) to estimate aqueous concentration. The results showed an increase of water contamination due to the studied agricultural area. The maximal contamination was observed in April and corresponds to the period of herbicide application on the crops.

Emotional intelligence: On definitions, neuroscience, and marshmallows

In his timely article, Cherniss offers his vision for the future of "Emotional Intelligence" (EI). However, his goal of clarifying the concept by distinguishing definitions from models and his support for "Emotional and Social Competence" (ESC) models will, in our opinion, not make the field advance. To be upfront, we agree that emotions are important for effective decision-making, leadership, performance and the like; however, at this time, EI and ESC have not yet demonstrated incremental validity over and above IQ and personality tests in meta-analyses (Harms & Credé, 2009; Van Rooy & Viswesvaran, 2004). If there is a future for EI, we see it in the ability model of Mayer, Salovey and associates (e.g, Mayer, Caruso, & Salovey, 2000), which detractors and supporters agree holds the most promise (Antonakis, Ashkanasy, & Dasborough, 2009; Zeidner, Roberts, & Matthews, 2008). With their use of quasi-objective scoring measures, the ability model grounds EI in existing frameworks of intelligence, thus differentiating itself from ESC models and their self-rated trait inventories. In fact, we do not see the value of ESC models: They overlap too much with current personality models to offer anything new for science and practice (Zeidner, et al., 2008). In this commentary we raise three concerns we have with Cherniss's suggestions for ESC models: (1) there are important conceptual problems in both the definition of ESC and the distinction of ESC from EI; (2) Cherniss's interpretation of neuroscience findings as supporting the constructs of EI and ESC is outdated, and (3) his interpretation of the famous marshmallow experiment as indicating the existence of ESCs is flawed. Building on the promise of ability models, we conclude by providing suggestions to improve research in EI.

Jeunes filles scoliotiques et orthopédie a la Belle Epoque: l'essor urbain de la mécanothérapie a Lausanne et Genève [Scoliotic young girls and orthopaedics in Belle Epoque: the urban surge of mecanotherapy in Lausanne and Geneva].

In Belle Epoque towns marked by the industrial and medical surge, a new technical therapy, called mechanotherapy, emerged, stemming from Swedish medical gymnastics and auxiliary to orthopaedics. Aiming mostly at treating scoliosis, this therapy by movement attracted a sizeable female clientele to these towns, because of the hygienic and social conceptions feeding collective imagination linked to the bodies of scoliotic young girls. Taking the French-speaking Swiss towns of Lausanne and Geneva as examples, the article first seeks to describe the emergence of mechanotherapy as a medical and urban phenomenon. It then addresses the role played by scoliosis in this orthopaedic practice, and examines the clientele attracted to the towns, among which well-born young girls seem to be predominant.

In-vitro cell exposure studies for the assessment of nanoparticle toxicity in the lung: a dialog between aerosol science and biology

The introduction of engineered nanostructured materials into a rapidly increasing number of industrial and consumer products will result in enhanced exposure to engineered nanoparticles. Workplace exposure has been identified as the most likely source of uncontrolled inhalation of engineered aerosolized nanoparticles, but release of engineered nanoparticles may occur at any stage of the lifecycle of (consumer) products. The dynamic development of nanomaterials with possibly unknown toxicological effects poses a challenge for the assessment of nanoparticle induced toxicity and safety.In this consensus document from a workshop on in-vitro cell systems for nanoparticle toxicity testing11Workshop on 'In-Vitro Exposure Studies for Toxicity Testing of Engineered Nanoparticles' sponsored by the Association for Aerosol Research (GAeF), 5-6 September 2009, Karlsruhe, Germany. an overview is given of the main issues concerning exposure to airborne nanoparticles, lung physiology, biological mechanisms of (adverse) action, in-vitro cell exposure systems, realistic tissue doses, risk assessment and social aspects of nanotechnology. The workshop participants recognized the large potential of in-vitro cell exposure systems for reliable, high-throughput screening of nanoparticle toxicity. For the investigation of lung toxicity, a strong preference was expressed for air-liquid interface (ALI) cell exposure systems (rather than submerged cell exposure systems) as they more closely resemble in-vivo conditions in the lungs and they allow for unaltered and dosimetrically accurate delivery of aerosolized nanoparticles to the cells. An important aspect, which is frequently overlooked, is the comparison of typically used in-vitro dose levels with realistic in-vivo nanoparticle doses in the lung. If we consider average ambient urban exposure and occupational exposure at 5mg/m3 (maximum level allowed by Occupational Safety and Health Administration (OSHA)) as the boundaries of human exposure, the corresponding upper-limit range of nanoparticle flux delivered to the lung tissue is 3×10-5-5×10-3μg/h/cm2 of lung tissue and 2-300particles/h/(epithelial) cell. This range can be easily matched and even exceeded by almost all currently available cell exposure systems.The consensus statement includes a set of recommendations for conducting in-vitro cell exposure studies with pulmonary cell systems and identifies urgent needs for future development. As these issues are crucial for the introduction of safe nanomaterials into the marketplace and the living environment, they deserve more attention and more interaction between biologists and aerosol scientists. The members of the workshop believe that further advances in in-vitro cell exposure studies would be greatly facilitated by a more active role of the aerosol scientists. The technical know-how for developing and running ALI in-vitro exposure systems is available in the aerosol community and at the same time biologists/toxicologists are required for proper assessment of the biological impact of nanoparticles.

Community-wide plasmid gene mobilization and selection.

Plasmids have long been recognized as an important driver of DNA exchange and genetic innovation in prokaryotes. The success of plasmids has been attributed to their independent replication from the host's chromosome and their frequent self-transfer. It is thought that plasmids accumulate, rearrange and distribute nonessential genes, which may provide an advantage for host proliferation under selective conditions. In order to test this hypothesis independently of biases from culture selection, we study the plasmid metagenome from microbial communities in two activated sludge systems, one of which receives mostly household and the other chemical industry wastewater. We find that plasmids from activated sludge microbial communities carry among the largest proportion of unknown gene pools so far detected in metagenomic DNA, confirming their presumed role of DNA innovators. At a system level both plasmid metagenomes were dominated by functions associated with replication and transposition, and contained a wide variety of antibiotic and heavy metal resistances. Plasmid families were very different in the two metagenomes and grouped in deep-branching new families compared with known plasmid replicons. A number of abundant plasmid replicons could be completely assembled directly from the metagenome, providing insight in plasmid composition without culturing bias. Functionally, the two metagenomes strongly differed in several ways, including a greater abundance of genes for carbohydrate metabolism in the industrial and of general defense factors in the household activated sludge plasmid metagenome. This suggests that plasmids not only contribute to the adaptation of single individual prokaryotic species, but of the prokaryotic community as a whole under local selective conditions.

Palaeotectonic and palaeogeographic evolution of the western Tethys and PeriTethyan domain (IGCP Project 369)

Project No. 369 (''Comparative Evolution of PeriTethyan Rift Basins'') of the International Geological Correlation Program produced a new palaeotectonic-palaeo-geographic atlas of the western PeriTethyan domain. The atlas contains more than two hundred new maps and documents grouped in nine regional sets (Iberia, Polish Trough, Eastern European and Scythian Platforms, Moesian Platform, Levant, Arabian Platform,, Northern Africa, NE Africa-NW Arabia, Libya-Pelagian Shelf plus a set of reconstructions for the whole western Tethys. The area, considered in the atlas stretches. from west to east, from the eastern Atlantic shores to the Urals and, from north to south, from the Baltic shield to equatorial Africa; the time span covered extends from the Late. Carboniferous to the Present. The dataset, resulting from an extensive cooperation between industrial and academic sources, is accessible interactively on a CD-ROM (Stampfli et al., 2001a) and includes legend, timetable, short explanatory notes, full references and additional supporting data. This dataset provides information on the development of the Tethyan realm in space and time. In particular, the relation between the Variscan and Cimmerian cycles in the Mediterranean realm is illustrated by numerous palaeogeographic and palaeotectonic maps.

The effects of safety climate and trust on job satisfaction

Job satisfaction has been a frequently studied concept in organizational behavior. Past research has shown that trust in top management is an important factor influencing job satisfaction. To date, little attention has been paid to safety climate perceptions as a possible predictor of job satisfaction. In our study we investigated the direct and interactive effects of trust in top management and individual-level perceptions of safety climate in predicting job satisfaction. The findings of this study point to the importance of positive perceptions of safety climate on employees' job satisfaction when trust in top management is low.

Gender ingroup projection and the evaluative connotation of leader prototypes

The underrepresentation of women in top corporate ranks is a topic of ongoing discussion. Manager prototypes are proposed to be more male-typed than female-typed because historically men more often than women have held leadership roles. Why then is the maleness of manager prototypes even more pronounced among men than among women? Given that most personnel decision makers in organizations are men this phenomenon is problematic for women's advancement to top management positions. We address this question by investigating peoples' use of ingroup projection and their endorsement of evaluative attributes in constructing gender and leader prototypes.

Testing mediation: The endogeneity problem and the solution

A mediator is a dependent variable, m (e.g., charisma), that is thought to channel the effect of an independent variable, x (e.g., receiving training or not), on another dependent variable (e.g., subordinate satisfaction), y. In experimental settings x is manipulated-subjects are randomized to treatment-to isolate the causal effect of x on other variables. If m is not or cannot be manipulated, which is often the case, its causal effect on other variables cannot be determined; thus, standard mediation tests cannot inform policy or practice. I will show how an econometric procedure, called instrumental-variable estimation, can examine mediation in such cases.

Endocrine disruptors: from endocrine to metabolic disruption.

Synthetic chemicals currently used in a variety of industrial and agricultural applications are leading to widespread contamination of the environment. Even though the intended uses of pesticides, plasticizers, antimicrobials, and flame retardants are beneficial, effects on human health are a global concern. These so-called endocrine-disrupting chemicals (EDCs) can disrupt hormonal balance and result in developmental and reproductive abnormalities. New in vitro, in vivo, and epidemiological studies link human EDC exposure with obesity, metabolic syndrome, and type 2 diabetes. Here we review the main chemical compounds that may contribute to metabolic disruption. We then present their demonstrated or suggested mechanisms of action with respect to nuclear receptor signaling. Finally, we discuss the difficulties of fairly assessing the risks linked to EDC exposure, including developmental exposure, problems of high- and low-dose exposure, and the complexity of current chemical environments.

La force motrice hydraulique au service du développement économique helvétique : L'exemple du réseau d'eau sous pression à Lausanne 1868-1914

The success story of hydroelectricity long influenced and dominated Swiss scholarly literature devoted to the history of technology. This means of conducting power, which emerged at the end of the 19th century and is still dominating today, has attracted much more attention than technologies that have been shadowed by its success. In spite of their important contribution to Swiss economic development, the distribution networks of pressurized water have been neglected by scholars. This article contributes to close this historiographic gap by analyzing the introduction of pressurized water distribution in 1876 in Lausanne, in the context of the building of the first Swiss cable funicular between Lausanne and Ouchy. This article shows how pressurized water distribution transformed socio-economic practices in the urban areas in which it was adopted. Indeed, this innovation, which allowed the use of distant hydraulic resources, enabled the rationalization of industrial and artisanal production as well as improved the density of the urban industrial base. By facilitating the introduction of electric lighting, pressurized water networks played a key role in the early development, and further successes, of the Swiss hydroelectric industry.

6.2

Airborne particles can come from a variety of sources and contain variable chemical constituents. Some particles are formed by natural processes, such as volcanoes, erosion, sea spray, and forest fires, while other are formed by anthropogenic processes, such as industrial- and motor vehicle-related combustion, road-related wear, and mining. In general, larger particles (those greater than 2.5 μm) are formed by mechanical processes, while those less than 2.5 μm are formed by combustion processes. The chemical composition of particles is highly influenced by the source: for combustion-related particles, factors such as temperature of combustion, fuel type, and presence of oxygen or other gases can also have a large impact on PM composition. These differences can often be observed at a regional level, such as the greater sulphate-composition of PM in regions that burn coal for electricity production (which contains sulphur) versus regions that do not. Most countries maintain air monitoring networks, and studies based on the resulting data are the most common basis for epidemiology studies on the health effects of PM. Data from these monitoring stations can be used to evaluate the relationship between community-level exposure to ambient particles and health outcomes (i.e., morbidity or mortality from various causes). Respiratory and cardiovascular outcomes are the most commonly assessed, although studies have also considered other related specific outcomes such as diabetes and congenital heart disease. The data on particle characteristics is usually not very detailed and most often includes some combination of PM2.5, PM10, sulphate, and NO2. Other descriptors that are less commonly found include particle number (ultrafine particles), metal components of PM, local traffic intensity, and EC/OC. Measures of association are usually reported per 10 μg/m3 or interquartile range increase in pollutant concentration. As the exposure data are taken from regional monitoring stations, the measurements are not representative of an individual's exposure. Particle size is an important descriptor for understanding where in the human respiratory system the particles will deposit: as a general rule, smaller particles penetrate to deeper regions of the lungs. Initial studies on the health effects of particulate matter focused on mass of the particles, including either all particles (often termed total suspended particulate or TSP) or PM10 (all particles with an aerodynamic diameter less than 10 μm). More recently, studies have considered both PM10 and PM2.5, with the latter corresponding more directly to combustion-related processes. UFPs are a dominant source of particles in terms of PNC, yet are negligible in terms of mass. Very few epidemiology studies have measured the effect of UFPs on health; however, the numbers of studies on this topic are increasing. In addition to size, chemical composition is of importance when understanding the toxicity of particles. Some studies consider the composition of particles in addition to mass; however this is not common, in part due the cost and labour involved in such analyses.