A hormonal regulatory module that provides flexibility to tropic responses.

Plants orient their growth depending on directional stimuli such as light and gravity, in a process known as tropic response. Tropisms result from asymmetrical accumulation of auxin across the responding organ relative to the direction of the stimulus, which causes differential growth rates on both sides of the organ. Here, we show that gibberellins (GAs) attenuate the gravitropic reorientation of stimulated hypocotyls of dark-grown Arabidopsis (Arabidopsis thaliana) seedlings. We show that the modulation occurs through induction of the expression of the negative regulator of auxin signaling INDOLE-3-ACETIC ACID INDUCIBLE19/MASSUGU2. The biological significance of this regulatory mechanism involving GAs and auxin seems to be the maintenance of a high degree of flexibility in tropic responses. This notion is further supported by observations that GA-deficient seedlings showed a much lower variance in the response to gravity compared to wild-type seedlings and that the attenuation of gravitropism by GAs resulted in an increased phototropic response. This suggests that the interplay between auxin and GAs may be particularly important for plant orientation under competing tropic stimuli.

Cryo-negative staining reveals conformational flexibility within yeast RNA polymerase I.

The structure of the yeast DNA-dependent RNA polymerase I (RNA Pol I), prepared by cryo-negative staining, was studied by electron microscopy. A structural model of the enzyme at a resolution of 1.8 nm was determined from the analysis of isolated molecules and showed an excellent fit with the atomic structure of the RNA Pol II Delta4/7. The high signal-to-noise ratio (SNR) of the stained molecular images revealed a conformational flexibility within the image data set that could be recovered in three-dimensions after implementation of a novel strategy to sort the "open" and "closed" conformations in our heterogeneous data set. This conformational change mapped in the "wall/flap" domain of the second largest subunit (beta-like) and allows a better accessibility of the DNA-binding groove. This displacement of the wall/flap domain could play an important role in the transition between initiation and elongation state of the enzyme. Moreover, a protrusion was apparent in the cryo-negatively stained model, which was absent in the atomic structure and was not detected in previous 3D models of RNA Pol I. This structure could, however, be detected in unstained views of the enzyme obtained from frozen hydrated 2D crystals, indicating that this novel feature is not induced by the staining process. Unexpectedly, negatively charged molybdenum compounds were found to accumulate within the DNA-binding groove, which is best explained by the highly positive electrostatic potential of this region of the molecule, thus, suggesting that the stain distribution reflects the overall surface charge of the molecule.

Profile of male adolescents with conduct disorder on intellectual efficacy, cognitive flexibility, cognitive coping, impulsivity and alexithymia: a comparison with high-risk controls

Background and Objectives: To specify which of the documented cognitive and emotional deficits characterize adolescents with conduct disorder (CD) compared with high-risk controls. Methods: High-risk adolescent males with and without CD were compared on intellectual efficiency, cognitive flexibility, impulsivity, alexithymia, and cognitive coping strategies. Substance use was controlled for in analyses. Results: Both groups showed normal intellectual efficiency and cognitive flexibility, as weil as heightened alexithymia and bebavioral impulsivity. Youths with CD evidenced more self-defeating and black-and-white tbinking under stress, and more acting-out under negative affect, than those without CD. Conclusions: Deficits specifie to CD resided in facets of emotional functioning and cognitive coping that might be targeted by a coping skills intervention.

Oxidative phosphorylation flexibility in the liver of mice resistant to high-fat diet-induced hepatic steatosis.

OBJECTIVE To identify metabolic pathways that may underlie susceptibility or resistance to high-fat diet-induced hepatic steatosis. RESEARCH DESIGN AND METHODS We performed comparative transcriptomic analysis of the livers of A/J and C57Bl/6 mice, which are, respectively, resistant and susceptible to high-fat diet-induced hepatosteatosis and obesity. Mice from both strains were fed a normal chow or a high-fat diet for 2, 10, and 30 days, and transcriptomic data were analyzed by time-dependent gene set enrichment analysis. Biochemical analysis of mitochondrial respiration was performed to confirm the transcriptomic analysis. RESULTS Time-dependent gene set enrichment analysis revealed a rapid, transient, and coordinate upregulation of 13 oxidative phosphorylation genes after initiation of high-fat diet feeding in the A/J, but not in the C57Bl/6, mouse livers. Biochemical analysis using liver mitochondria from both strains of mice confirmed a rapid increase by high-fat diet feeding of the respiration rate in A/J but not C57Bl/6 mice. Importantly, ATP production was the same in both types of mitochondria, indicating increased uncoupling of the A/J mitochondria. CONCLUSIONS Together with previous data showing increased expression of mitochondrial β-oxidation genes in C57Bl/6 but not A/J mouse livers, our present study suggests that an important aspect of the adaptation of livers to high-fat diet feeding is to increase the activity of the oxidative phosphorylation chain and its uncoupling to dissipate the excess of incoming metabolic energy and to reduce the production of reactive oxygen species. The flexibility in oxidative phosphorylation activity may thus participate in the protection of A/J mouse livers against the initial damages induced by high-fat diet feeding that may lead to hepatosteatosis.

Defensive flexibility and its relation to symptom severity, depression, and anxiety.

Numerous studies have examined which individual defense mechanisms are related with mental health, and which are linked with psychopathology. However, the idea that a flexible use of defensive mechanisms is related to psychological wellbeing remained a clinical assumption, which this study sought to test empirically. A total of 62 (N = 62) outpatients participated in the study and were assessed with the Symptom Checklist-90R and the Social Adjustment Self-rated Scale. A subsample of 40 participants was further assessed using the Hamilton Depression (HAMD-21) and Anxiety scales (HAMA-21). The first therapy session of all participants was transcribed and rated using the Defense Mechanisms Ratings Scales (), and the Overall Defensive Functioning (ODF) score, which indicates the maturity of one's defensive functioning, was computed. An indicator of flexible use of defenses was also calculated based on the Gini Concentration C measure. Results showed that defensive flexibility, but not ODF, could predict anxiety scores. Symptom severity was predicted by both ODF and defensive flexibility, although in directions opposite to our predictions. Results suggest that defensive flexibility captures another aspect of an individual's functioning not assessed by the ODF, and that it is a promising new way of documenting defensive functioning.

Partition coefficient and molecular flexibility: the concept of lipophilicity space.

The rationale of this study was to investigate molecular flexibility and its influence on physicochemical properties with a view to uncovering additional information on the fuzzy concept of dynamic molecular structure. Indeed, it is now known that computed molecular interaction fields (MIFs) such as molecular electrostatic potentials (MEPs) and lipophilicity potentials (MLPs) are conformation-dependent, as are dipole moments. A database of 125 compounds was used whose conformational space was explored, while conformation-dependent parameters were computed for each non-redundant conformer found in the conformational space of the compounds. These parameters were the virtual log P (log P(MLP), calculated by a MLP approach), the apolar surface area (ASA), polar surface area (PSA), and solvent-accessible surface (SAS). For each compound, the range taken by each parameter (its property space) was divided by the number of rotors taken as an index of flexibility, yielding a parameter termed 'molecular sensitivity'. This parameter was poorly correlated with others (i.e., it contains novel information) and showed the compounds to fall into two broad classes. 'Sensitive' molecules are those whose computed property ranges are markedly sensitive to conformational effects, whereas 'insensitive' (in fact, less sensitive) molecules have property ranges which are comparatively less affected by conformational fluctuations. A pharmacokinetic application is presented.

Relation between sequence and structure of HIV-1 protease inhibitor complexes: a model system for the analysis of protein flexibility.

The flexibility of different regions of HIV-1 protease was examined by using a database consisting of 73 X-ray structures that differ in terms of sequence, ligands or both. The root-mean-square differences of the backbone for the set of structures were shown to have the same variation with residue number as those obtained from molecular dynamics simulations, normal mode analyses and X-ray B-factors. This supports the idea that observed structural changes provide a measure of the inherent flexibility of the protein, although specific interactions between the protease and the ligand play a secondary role. The results suggest that the potential energy surface of the HIV-1 protease is characterized by many local minima with small energetic differences, some of which are sampled by the different X-ray structures of the HIV-1 protease complexes. Interdomain correlated motions were calculated from the structural fluctuations and the results were also in agreement with molecular dynamics simulations and normal mode analyses. Implications of the results for the drug-resistance engendered by mutations are discussed briefly.

Influence on Strength and Flexibility of a Swing Phase-Specific Hamstring Eccentric Program in Sprinters' General Preparation

Guex, KJ, Lugrin, V, Borloz, S, and Millet, GP. Influence on strength and flexibility of a swing phase-specific hamstring eccentric program in sprinters' general preparation. J Strength Cond Res 30(2): 525-532, 2016-Hamstring injuries are common in sprinters and mainly occur during the terminal swing phase. Eccentric training has been shown to reduce hamstring injury rate by improving several risk factors. The aim of this study was to test the hypothesis that an additional swing phase-specific hamstring eccentric training in well-trained sprinters performed at the commencement of the winter preparation is more efficient to improve strength, ratio, optimum angle, and flexibility than a similar program without hamstring eccentric exercises. Twenty sprinters were randomly allocated to an eccentric (n = 10) or a control group (n = 10). Both groups performed their usual track and field training throughout the study period. Sprinters in the eccentric group performed an additional 6-week hamstring eccentric program, which was specific to the swing phase of the running cycle (eccentric high-load open-chain kinetic movements covering the whole hamstring length-tension relationship preformed at slow to moderate velocity). Isokinetic and flexibility measurements were performed before and after the intervention. The eccentric group increased hamstring peak torques in concentric at 60 degrees .s by 16% (p < 0.001) and at 240 degrees .s by 10% (p < 0.01), in eccentric at 30 degrees .s by 20% (p < 0.001) and at 120 degrees .s by 22% (p < 0.001), conventional and functional ratios by 12% (p < 0.001), and flexibility by 4 degrees (p < 0.01), whereas the control group increased hamstring peak torques only in eccentric at 30 degrees .s by 6% (p </= 0.05) and at 120 degrees .s by 6% (p < 0.01). It was concluded that an additional swing phase-specific hamstring eccentric training in sprinters seems to be crucial to address different risk factors for hamstring strain injuries, such as eccentric and concentric strength, hamstring-to-quadriceps ratio ratio, and flexibility.

Social evolution in the sweat bee Halictus scabiosae

The evolution of eusociality is one of the major evolutionary transitions of life on earth. For investigating the conditions and processes that are central to the origin of such integrated social organization, it is best to study organisms in which individuals have retained some flexibility in their reproductive strategies. Halictid bees are especially well suited as model organisms, because they show huge variation in social systems, both within and between species. In this thesis, I investigated female reproductive strategies in the primitively eusocial bee Halictus scabiosae, with a focus on the role of helpers, in order to get insight into the mechanisms governing the evolution and maintenance of eusociality. This species produces two broods per year. The females from the first brood can stay in the natal nest to help raise a second brood of males and gynes that become the next-generation foundresses in spring. We first compared the morphology of females from the two broods, as well as the nutrition they receive as larvae. Then we conducted a helper- removal experiment in the field to quantify the effects of the presence of helpers on colony survival and productivity. Finally, we reconstructed pedigree relationships of individuals using microsatellite markers in order to detect who reproduces in the nest and how much individuals drift between nests. We found that first brood females had a uniformly small size and low fat reserves, which may be caused by the restricted pollen and nectar provisions on which they develop. Colony survival and productivity was increased by the presence of a single helper, but the effect was small and mostly limited to small colonies. By inferring parentage within and across colonies, we could determine that females from the first brood rarely reproduce in their natal nests. However, foundresses are frequently replaced, and foundresses and females from the first brood occasionally move to and reproduce in foreign colonies. As a result, colonies often contain offspring from unrelated individuals, and the relatedness of females to the brood they rear is low. Overall, this thesis shows that the reproductive system of H. scabiosae is highly flexible. The production of helpers in the first brood is important for colony success and productivity, but there is a high colony failure rate and part of the first brood females drift and reproduce in foreign nests. Both foundresses and helpers appear to be constrained by harsh environmental conditions or social factors limiting reproduction and independent colony founding. - L'origine des insectes sociaux est un domaine fascinant pour la recherche. Pour comprendre les mécanismes et les conditions qui sont nécessaires pour l'évolution et le maintien de la vie en société, il est judicieux d'étudier des sociétés primitives d'insectes, où toutes les femelles ont conservé la capacité de se reproduire, même si leur rôle comportemental dans la colonie est d'aider sans se reproduire. Une des familles d'abeilles, les halictes, est idéale pour cette sorte de recherche, en raison de la grande variabilité dans leur comportement social. Dans cette thèse, j'ai étudié les stratégies reproductives des femelles de Halictus scabiosae pour mieux comprendre les mécanismes qui influencent l'évolution de la vie en société. Cette espèce produit deux cohortes de couvain par année. Les femelles du premier couvain restent souvent dans leur nid natal pour aider à élever le deuxième couvain, tandis que les femelles du deuxième couvain s'accouplent et hibernent pour devenir les nouvelles fondatrices au printemps suivant. Nous avons d'abord comparé la morphologie des femelles issues des deux couvains ainsi que leur nutrition au stade de larve. Puis, dans une expérience sur le terrain, nous avons quantifié l'apport d'une ouvrière pour la survie et la productivité de la colonie. Finalement, nous avons reconstruit des pedigrees en utilisant des marqueurs génétiques, pour savoir qui se reproduit dans la colonie et combien d'individus migrent entre colonies. Les résultats montrent que les femelles du premier couvain sont uniformément plus petites et plus maigres, ce qui indique que les fondatrices réduisent les provisions de nourriture pour leur premier couvain afin de les inciter à aider dans le nid au lieu de se reproduire indépendamment. Dans l'expérience sur le terrain, la survie et la productivité de la colonie augmentaient avec la présence d'une ouvrière additionnelle, mais l'effet était petit et limité aux petites colonies. Par la reconstruction de pedigrees, nous pouvions constater que les femelles du premier couvain pondent rarement dans leurs nids natals. Les fondatrices cependant sont souvent remplacées en cours de saison, et migrent fréquemment entre nids, tandis que les femelles du premier couvain pondent parfois des oeufs dans des nids étrangers. De ce fait, les colonies contiennent souvent des descendants d'individus étrangers, et la parenté génétique entre les femelles et le deuxième couvain est basse. Cette thèse démontre que le système reproductif de H. scabiosae est très flexible. La production d'ouvrières est importante pour la survie de la colonie et sa productivité, mais le taux d'échec est élevé et une partie des femelles du premier couvain migrent et pondent dans une colonie étrangère. Autant les fondatrices que les ouvrières semblent être contraintes par des conditions environnementales ou sociales qui limitent la reproduction et les nouvelles fondations de colonie. - Die Entstehung von sozialen Lebensformen ist eines der wichtigsten Entwicklungen in der Geschichte des Lebens. Um die Bedingungen oder Prozesse zu verstehen, welche bei der Entstehung und dem Erhalt von sozialen Merkmalen wichtig sind, sollte man Lebewesen untersuchen, welche je nach Umwelteinflüßen ihr soziales Verhalten flexibel ändern können. Furchenbienen (Halictidae) gehören dazu. Diese weisen nämlich ein breites Spektrum verschiedener sozialer Organisationsformen auf, oftmals sogar innerhalb der einzelnen Arten. In meiner Doktorarbeit befasste ich mich mit den Fortpflanzungsstrategien der Weibchen der Skabiosen-Furchenbiene Halictus scabiosae. Diese Art produziert zwei Brüten pro Jahr. Die Weibchen der ersten Brut bleiben dabei meist als Arbeiterinnen in ihrem Geburtsnest, wohingegen die Weibchen der zweiten Brut nach der Paarung überwintern, um im nächsten Frühling neue Kolonien zu gründen. In einem ersten Schritt verglichen wir die beiden Brüten bezüglich der Grösse und der Fettreserven der Weibchen sowie der Pollen-Nektar-Vorräte für die Larven. Dann bestimmten wir in einem Feldexperiment, wieviel eine zusätzliche Arbeiterin zum Überleben und zur Produktiviät der Kolonie beiträgt. Schliesslich ermittelten wir durch genetische Tests die Verwandtschaftsbeziehungen zwischen den Bienen, um herauszufinden, wer in den Kolonien tatsächlich die Eier legt und ob und wieviel die Bienen zwischen verschiedenen Nestern wandern. Wir stellten fest, dass die Weibchen von der ersten Brut einheitlich kleiner sind und weniger Fettreserven besitzen. Das weist daraufhin, dass die Nestgründerin die erste Brut unterernährt, um die Wahrscheinlichkeit zu erhöhen, dass diese Weibchen als Arbeiterinnen im Nest bleiben anstatt sich unabhängig fortzupflanzen. Schon eine einzelne zusätzliche Arbeiterin verbesserte die Überlebenschancen und Produktivität der Kolonie, der Effekt war allerdings klein und auf kleine Kolonien beschränkt. Die Verwandtschaftsanalysen zeigten, dass die Arbeiterinnen nur sehr selten ein Ei in ihr Geburtsnest legen. Erstaunlicherweise wanderten die Nestgründerinnen oft zwischen verschiedenen Nestern. Einige Weibchen der ersten Brut wanderten auch in ein fremdes Nest und produzierten dort Nachkommen. Diese Doktorarbeit zeigt, dass die Fortpflanzungsstrategien der Skabiosen-Furchenbiene tatsächlich sehr flexibel sind. Die Anwesenheit von Arbeiterinnen ist wichtig für das Überleben und die Produktivität der Kolonie. Die Misserfolgsraten bleiben jedoch hoch, und ein Teil der Weibchen der ersten Brut pflanzt sich in fremden Nestern fort. Sowohl die Nestgründerinnen als auch die Weibchen der ersten Brut scheinen durch Umweltsbedingungen oder durch soziale Faktoren in der Wahl ihrer Fortpflanzungs¬strategie eingeschränkt zu sein.

Electroencephalographic source imaging: a prospective study of 152 operated epileptic patients.

Electroencephalography is mandatory to determine the epilepsy syndrome. However, for the precise localization of the irritative zone in patients with focal epilepsy, costly and sometimes cumbersome imaging techniques are used. Recent small studies using electric source imaging suggest that electroencephalography itself could be used to localize the focus. However, a large prospective validation study is missing. This study presents a cohort of 152 operated patients where electric source imaging was applied as part of the pre-surgical work-up allowing a comparison with the results from other methods. Patients (n = 152) with >1 year postoperative follow-up were studied prospectively. The sensitivity and specificity of each imaging method was defined by comparing the localization of the source maximum with the resected zone and surgical outcome. Electric source imaging had a sensitivity of 84% and a specificity of 88% if the electroencephalogram was recorded with a large number of electrodes (128-256 channels) and the individual magnetic resonance image was used as head model. These values compared favourably with those of structural magnetic resonance imaging (76% sensitivity, 53% specificity), positron emission tomography (69% sensitivity, 44% specificity) and ictal/interictal single-photon emission-computed tomography (58% sensitivity, 47% specificity). The sensitivity and specificity of electric source imaging decreased to 57% and 59%, respectively, with low number of electrodes (<32 channels) and a template head model. This study demonstrated the validity and clinical utility of electric source imaging in a large prospective study. Given the low cost and high flexibility of electroencephalographic systems even with high channel counts, we conclude that electric source imaging is a highly valuable tool in pre-surgical epilepsy evaluation.

Cognitive and Emotional Deficits Associated with Minor and Serious Delinquency in High-Risk Adolescents

This study aims at evaluating how minor and serious delinquency relates to cognitive and emotional functioning in high-risk adolescents, taking problematic substance use into account. In 80 high-risk adolescent males (13-19 years), the frequency of minor and serious offences committed over the last year was predicted, in multiple regression analyses, from problematic substance use, intellectual efficiency, trait impulsivity, alexithymia (inability to express feelings in words), and cognitive coping strategies. Both minor and serious delinquency were more frequent in adolescents with more problematic substance use and higher intellectual efficacy. Minor delinquency was further related to a tendency to act out when experiencing negative emotions, and difficulties in focusing energy on instrumental action when under stress; while serious delinquency was predominantly and strongly related to rigid and dichotomous thinking. The results underline the heterogeneous nature of delinquency, minor offences being primarily associated with emotional regulation deficits, while major offences are related with a lack of cognitive flexibility.

Disease-causing mutations improving the branch site and polypyrimidine tract: pseudoexon activation of LINE-2 and antisense Alu lacking the poly(T)-tail.

Cryptic exons or pseudoexons are typically activated by point mutations that create GT or AG dinucleotides of new 5' or 3' splice sites in introns, often in repetitive elements. Here we describe two cases of tetrahydrobiopterin deficiency caused by mutations improving the branch point sequence and polypyrimidine tracts of repeat-containing pseudoexons in the PTS gene. In the first case, we demonstrate a novel pathway of antisense Alu exonization, resulting from an intronic deletion that removed the poly(T)-tail of antisense AluSq. The deletion brought a favorable branch point sequence within proximity of the pseudoexon 3' splice site and removed an upstream AG dinucleotide required for the 3' splice site repression on normal alleles. New Alu exons can thus arise in the absence of poly(T)-tails that facilitated inclusion of most transposed elements in mRNAs by serving as polypyrimidine tracts, highlighting extraordinary flexibility of Alu repeats in shaping intron-exon structure. In the other case, a PTS pseudoexon was activated by an A>T substitution 9 nt upstream of its 3' splice site in a LINE-2 sequence, providing the first example of a disease-causing exonization of the most ancient interspersed repeat. These observations expand the spectrum of mutational mechanisms that introduce repetitive sequences in mature transcripts and illustrate the importance of intronic mutations in alternative splicing and phenotypic variability of hereditary disorders.

New developments and applications in modelling occupational exposure to airborne contaminants

Résumé: L'évaluation de l'exposition aux nuisances professionnelles représente une étape importante dans l'analyse de poste de travail. Les mesures directes sont rarement utilisées sur les lieux même du travail et l'exposition est souvent estimée sur base de jugements d'experts. Il y a donc un besoin important de développer des outils simples et transparents, qui puissent aider les spécialistes en hygiène industrielle dans leur prise de décision quant aux niveaux d'exposition. L'objectif de cette recherche est de développer et d'améliorer les outils de modélisation destinés à prévoir l'exposition. Dans un premier temps, une enquête a été entreprise en Suisse parmi les hygiénistes du travail afin d'identifier les besoins (types des résultats, de modèles et de paramètres observables potentiels). Il a été constaté que les modèles d'exposition ne sont guère employés dans la pratique en Suisse, l'exposition étant principalement estimée sur la base de l'expérience de l'expert. De plus, l'émissions de polluants ainsi que leur dispersion autour de la source ont été considérés comme des paramètres fondamentaux. Pour tester la flexibilité et la précision des modèles d'exposition classiques, des expériences de modélisations ont été effectuées dans des situations concrètes. En particulier, des modèles prédictifs ont été utilisés pour évaluer l'exposition professionnelle au monoxyde de carbone et la comparer aux niveaux d'exposition répertoriés dans la littérature pour des situations similaires. De même, l'exposition aux sprays imperméabilisants a été appréciée dans le contexte d'une étude épidémiologique sur une cohorte suisse. Dans ce cas, certains expériences ont été entreprises pour caractériser le taux de d'émission des sprays imperméabilisants. Ensuite un modèle classique à deux-zone a été employé pour évaluer la dispersion d'aérosol dans le champ proche et lointain pendant l'activité de sprayage. D'autres expériences ont également été effectuées pour acquérir une meilleure compréhension des processus d'émission et de dispersion d'un traceur, en se concentrant sur la caractérisation de l'exposition du champ proche. Un design expérimental a été développé pour effectuer des mesures simultanées dans plusieurs points d'une cabine d'exposition, par des instruments à lecture directe. Il a été constaté que d'un point de vue statistique, la théorie basée sur les compartiments est sensée, bien que l'attribution à un compartiment donné ne pourrait pas se faire sur la base des simples considérations géométriques. Dans une étape suivante, des données expérimentales ont été collectées sur la base des observations faites dans environ 100 lieux de travail différents: des informations sur les déterminants observés ont été associées aux mesures d'exposition des informations sur les déterminants observés ont été associé. Ces différentes données ont été employées pour améliorer le modèle d'exposition à deux zones. Un outil a donc été développé pour inclure des déterminants spécifiques dans le choix du compartiment, renforçant ainsi la fiabilité des prévisions. Toutes ces investigations ont servi à améliorer notre compréhension des outils des modélisations ainsi que leurs limitations. L'intégration de déterminants mieux adaptés aux besoins des experts devrait les inciter à employer cet outil dans leur pratique. D'ailleurs, en augmentant la qualité des outils des modélisations, cette recherche permettra non seulement d'encourager leur utilisation systématique, mais elle pourra également améliorer l'évaluation de l'exposition basée sur les jugements d'experts et, par conséquent, la protection de la santé des travailleurs. Abstract Occupational exposure assessment is an important stage in the management of chemical exposures. Few direct measurements are carried out in workplaces, and exposures are often estimated based on expert judgements. There is therefore a major requirement for simple transparent tools to help occupational health specialists to define exposure levels. The aim of the present research is to develop and improve modelling tools in order to predict exposure levels. In a first step a survey was made among professionals to define their expectations about modelling tools (what types of results, models and potential observable parameters). It was found that models are rarely used in Switzerland and that exposures are mainly estimated from past experiences of the expert. Moreover chemical emissions and their dispersion near the source have also been considered as key parameters. Experimental and modelling studies were also performed in some specific cases in order to test the flexibility and drawbacks of existing tools. In particular, models were applied to assess professional exposure to CO for different situations and compared with the exposure levels found in the literature for similar situations. Further, exposure to waterproofing sprays was studied as part of an epidemiological study on a Swiss cohort. In this case, some laboratory investigation have been undertaken to characterize the waterproofing overspray emission rate. A classical two-zone model was used to assess the aerosol dispersion in the near and far field during spraying. Experiments were also carried out to better understand the processes of emission and dispersion for tracer compounds, focusing on the characterization of near field exposure. An experimental set-up has been developed to perform simultaneous measurements through direct reading instruments in several points. It was mainly found that from a statistical point of view, the compartmental theory makes sense but the attribution to a given compartment could ñó~be done by simple geometric consideration. In a further step the experimental data were completed by observations made in about 100 different workplaces, including exposure measurements and observation of predefined determinants. The various data obtained have been used to improve an existing twocompartment exposure model. A tool was developed to include specific determinants in the choice of the compartment, thus largely improving the reliability of the predictions. All these investigations helped improving our understanding of modelling tools and identify their limitations. The integration of more accessible determinants, which are in accordance with experts needs, may indeed enhance model application for field practice. Moreover, while increasing the quality of modelling tool, this research will not only encourage their systematic use, but might also improve the conditions in which the expert judgments take place, and therefore the workers `health protection.

What do we gain from simplicity versus complexity in species distribution models?

Species distribution models (SDMs) are widely used to explain and predict species ranges and environmental niches. They are most commonly constructed by inferring species' occurrence-environment relationships using statistical and machine-learning methods. The variety of methods that can be used to construct SDMs (e.g. generalized linear/additive models, tree-based models, maximum entropy, etc.), and the variety of ways that such models can be implemented, permits substantial flexibility in SDM complexity. Building models with an appropriate amount of complexity for the study objectives is critical for robust inference. We characterize complexity as the shape of the inferred occurrence-environment relationships and the number of parameters used to describe them, and search for insights into whether additional complexity is informative or superfluous. By building 'under fit' models, having insufficient flexibility to describe observed occurrence-environment relationships, we risk misunderstanding the factors shaping species distributions. By building 'over fit' models, with excessive flexibility, we risk inadvertently ascribing pattern to noise or building opaque models. However, model selection can be challenging, especially when comparing models constructed under different modeling approaches. Here we argue for a more pragmatic approach: researchers should constrain the complexity of their models based on study objective, attributes of the data, and an understanding of how these interact with the underlying biological processes. We discuss guidelines for balancing under fitting with over fitting and consequently how complexity affects decisions made during model building. Although some generalities are possible, our discussion reflects differences in opinions that favor simpler versus more complex models. We conclude that combining insights from both simple and complex SDM building approaches best advances our knowledge of current and future species ranges.