New methods for detecting antibiotic resistant bacteria and preventing their spread

Methicillin resistant Staphylococcus aureus (MRSA) bacteria have emerged in the early 1980's in numerous health care institutions around the world. The main transmission mechanism within hospitals and healthcare facilities is through the hands of health care workers. Resistant to several antibiotics, the MRSA is one of the most feared pathogens in the hospital setting since it is very difficult to eradicate with the standard treatments. There are still a limited number of anti-MRSA antibiotics but the first cases of resistance to these compounds have already been reported and their frequency is likely to increase in the coming years. Every year, the MRSA infections result in major human and financial costs, due to the high associated mortality and expenses related to the required care. Measures towards a faster detection of resistant bacteria and establishment of appropriate antibiotic treatment parameters are fundamental. Also as part as infection prevention, diminution of bacteria present on the commonly touched surfaces could also limit the spread and selection of antibiotic resistant bacteria. During my thesis, projects were developed around MRSA and antibiotic resistance investigation using innovative technologies. The thesis was subdivided in three main parts with the use of atomic force microscopy AFM for antibiotic resistance detection in part 1, the importance of the bacterial inoculum size in the selection of antibiotic resistance in part 2 and the testing of antimicrobial surfaces creating by sputtering copper onto polyester in part 3. In part 1 the AFM was used two different ways, first for the measurement of stiffness (elasticity) of bacteria and second as a nanosensor for antibiotic susceptibility testing. The stiffness of MRSA with different susceptibility profiles to vancomycin was investigated using the stiffness tomography mode of the AFM and results have demonstrated and increased stiffness in the vancomycin resistant strains that also paralleled with increased thickness of the bacterial cell wall. Parts of the AFM were also used to build a new antibiotic susceptibility-testing device. This nano sensor was able to measure vibrations emitted from living bacteria that ceased definitively upon antibiotic exposure to which they were susceptible but restarted after antibiotic removal to which they were resistant, allowing in a matter of minute the assessment of antibiotic susceptibility determination. In part 2 the inoculum effect (IE) of vancomycin, daptomycin and linezolid and its importance in antibiotic resistance selection was investigated with MRSA during a 15 days of cycling experiment. Results indicated that a high bacterial inoculum and a prolonged antibiotic exposure were two key factors in the in vitro antibiotic resistance selection in MRSA and should be taken into consideration when choosing the drug treatment. Finally in part 3 bactericidal textile surfaces were investigated against MRSA. Polyesters coated after 160 seconds of copper sputtering have demonstrated a high bactericidal activity reducing the bacterial load of at least 3 logio after one hour of contact. -- Au cours des dernières décennies, des bactéries multirésistantes aux antibiotiques (BMR) ont émergé dans les hôpitaux du monde entier. Depuis lors, le nombre de BMR et la prévalence des infections liées aux soins (IAS) continuent de croître et sont associés à une augmentation des taux de morbidité et de mortalité ainsi qu'à des coûts élevés. De plus, le nombre de résistance à différentes classes d'antibiotiques a également augmenté parmi les BMR, limitant ainsi les options thérapeutiques disponibles lorsqu'elles ont liées a des infections. Des mesures visant une détection plus rapide des bactéries résistantes ainsi que l'établissement des paramètres de traitement antibiotiques adéquats sont primordiales lors d'infections déjà présentes. Dans une optique de prévention, la diminution des bactéries présentes sur les surfaces communément touchées pourrait aussi freiner la dissémination et l'évolution des bactéries résistantes. Durant ma thèse, différents projets incluant des nouvelles technologies et évoluant autour de la résistance antibiotique ont été traités. Des nouvelles technologies telles que le microscope à force atomique (AFM) et la pulvérisation cathodique de cuivre (PCC) ont été utilisées, et le Staphylococcus aureus résistant à la méticilline (SARM) a été la principale BMR étudiée. Deux grandes lignes de recherche ont été développées; la première visant à détecter la résistance antibiotique plus rapidement avec l'AFM et la seconde visant à prévenir la dissémination des BMR avec des surfaces crées grâce à la PCC. L'AFM a tout d'abord été utilisé en tant que microscope à sonde locale afin d'investiguer la résistance à la vancomycine chez les SARMs. Les résultats ont démontré que la rigidité de la paroi augmentait avec la résistance à la vancomycine et que celle-ci corrélait aussi avec une augmentation de l'épaisseur des parois, vérifiée grâce à la microscopie électronique. Des parties d'un AFM ont été ensuite utilisées afin de créer un nouveau dispositif de test de sensibilité aux antibiotiques, un nanocapteur. Ce nanocapteur mesure des vibrations produites par les bactéries vivantes. Après l'ajout d'antibiotique, les vibrations cessent définitivement chez les bactéries sensibles à l'antibiotique. En revanche pour les bactéries résistantes, les vibrations reprennent après le retrait de l'antibiotique dans le milieu permettant ainsi, en l'espace de minutes de détecter la sensibilité de la bactérie à un antibiotique. La PCC a été utilisée afin de créer des surfaces bactéricides pour la prévention de la viabilité des BMR sur des surfaces inertes. Des polyesters finement recouverts de cuivre (Cu), connu pour ses propriétés bactéricides, ont été produits et testés contre des SARMs. Une méthode de détection de viabilité des bactéries sur ces surfaces a été mise au point, et les polyesters obtenus après 160 secondes de pulvérisation au Cu ont démontré une excellente activité bactéricide, diminuant la charge bactérienne d'au moins 3 logio après une heure de contact. En conclusion, l'utilisation de nouvelles technologies nous a permis d'évoluer vers de méthodes de détection de la résistance antibiotique plus rapides ainsi que vers le développement d'un nouveau type de surface bactéricide, dans le but d'améliorer le diagnostic et la gestion des BMR.

The Corrosion of Career? - Occupational Trajectories of Business Economists and Engineers in Switzerland

Achievement careers are regarded as a distinctive element of the post-war period in occidental societies. Such a career was at once a modal trajectory of the modern parts of middleclass men and a social emblem for progress and success. However, if the achievement career came to be a biographical pattern with great normative power, its precise sequential course remained vague. Theories of the 1960s and 1970s described it as an orderly advancement within large firms. By the 1990s, scholars postulated an erosion of the organizational structures that once contributed to the institutionalization of careers, accompanied by a weakening of the normative weight of the achievement career by management discourse. We question the thesis of the corrosion of achievement career by analysing the trajectories of 442 engineers and business economists in Switzerland in regard to their orderliness, loyalty, and temporal rhythm. An inspection of types of careers and cohorts reveals that even if we face a decline of loyalty over time, hierarchical orderliness is not touched by those changes. Foremost, technical-industrial careers fit the loyal and regular pattern. Hence, this trajectory-type represents only a minority and is by far the slowest and least successful in terms of hierarchical ascension.

Skeletal Muscle Mitochondrial and Lipid Droplet Volume Density: Validity of Electron Microscopy Point-counting Measurements

Mitochondrial (M) and lipid droplet (L) volume density (vd) are often used in exercise research. Vd is the volume of muscle occupied by M and L. The means of calculating these percents are accomplished by applying a grid to a 2D image taken with transmission electron microscopy; however, it is not known which grid best predicts these values. PURPOSE: To determine the grid with the least variability of Mvd and Lvd in human skeletal muscle. METHODS: Muscle biopsies were taken from vastus lateralis of 10 healthy adults, trained (N=6) and untrained (N=4). Samples of 5-10mg were fixed in 2.5% glutaraldehyde and embedded in EPON. Longitudinal sections of 60 nm were cut and 20 images were taken at random at 33,000x magnification. Vd was calculated as the number of times M or L touched two intersecting grid lines (called a point) divided by the total number of points using 3 different sizes of grids with squares of 1000x1000nm sides (corresponding to 1µm2), 500x500nm (0.25µm2) and 250x250nm (0.0625µm2). Statistics included coefficient of variation (CV), 1 way-BS ANOVA and spearman correlations. RESULTS: Mean age was 67 ± 4 yo, mean VO2peak 2.29 ± 0.70 L/min and mean BMI 25.1 ± 3.7 kg/m2. Mean Mvd was 6.39% ± 0.71 for the 1000nm squares, 6.01% ± 0.70 for the 500nm and 6.37% ± 0.80 for the 250nm. Lvd was 1.28% ± 0.03 for the 1000nm, 1.41% ± 0.02 for the 500nm and 1.38% ± 0.02 for the 250nm. The mean CV of the three grids was 6.65% ±1.15 for Mvd with no significant differences between grids (P>0.05). Mean CV for Lvd was 13.83% ± 3.51, with a significant difference between the 1000nm squares and the two other grids (P<0.05). The 500nm squares grid showed the least variability between subjects. Mvd showed a positive correlation with VO2peak (r = 0.89, p < 0.05) but not with weight, height, or age. No correlations were found with Lvd. CONCLUSION: Different size grids have different variability in assessing skeletal muscle Mvd and Lvd. The grid size of 500x500nm (240 points) was more reliable than 1000x1000nm (56 points). 250x250nm (1023 points) did not show better reliability compared with the 500x500nm, but was more time consuming. Thus, choosing a grid with square size of 500x500nm seems the best option. This is particularly relevant as most grids used in the literature are either 100 points or 400 points without clear information on their square size.

Quelle assistance psychologique pour les couples requérant une aide médicale à la procréation [Which psychological support for couples seeking medical assistance for procreation?]

OBJECTIVES: The objective of our qualitative study was to define modalities of psychological support to be offered to couples seeking medically assisted procreation. MATERIAL AND METHODS: Forty couples participated in a semi-structured videotaped interview, which touched on themes such as personal and family histories, the couple's relationship, etc. We focused on the "narrative mobility", that is the way in which the couples transmit their personal and family history during the interview and the interviewer's impression that he may or may not share this with the couples. RESULTS: Observed differences in narrative mobility led us to distinguish three groups of couples and to propose various types of psychological support. DISCUSSION AND CONCLUSION: This exploratory study, with its interest for the narrative mobility, concerns the couples' capacity to stand back from their own story as responsible interlocutors. We made the hypothesis that this capacity is linked to their capacity to handle their emotional stress, to act as partners to the medical team and to prepare themselves for their future parenthood.

Value and prices in Russian economic thought (1890-1920)

The subject "Value and prices in Russian economic thought (1890--1920)" should evoke several names and debates in the reader's mind. For a long time, Western scholars have been aware that the Russian economists Tugan-Baranovsky and Bortkiewicz were active participants to the Marxian transformation problem, that the mathematical models of Dmitriev prefigured forthcoming neoricardian based models, and that many Russian economists were either supporting the Marxian labour theory of value or being revisionists. Moreover, these ideas were preparing the ground for Soviet planning. Russian scholars additionally knew that this period was the time of introduction of marginalism in Russia, and that, during this period, economists were active in thinking the relation of ethics with economic theory. All these issues are well covered in the existing literature. But there is a big gap that this dissertation intends to fill. The existing literature handles these pieces separately, although they are part of a single, more general, history. All these issues (the labour theory of value, marginalism, the Marxian transformation problem, planning, ethics, mathematical economics) were part of what this dissertation calls here "The Russian synthesis". The Russian synthesis (in the singular) designates here all the attempts at synthesis between classical political economy and marginalism, between labour theory of value and marginal utility, and between value and prices that occurred in Russian economic thought between 1890 and 1920, and that embraces the whole set of issues evoked above. This dissertation has the ambition of being the first comprehensive history of that Russian synthesis. In this, this contribution is unique. It has always surprised the author of the present dissertation that such a book has not yet been written. Several good reasons, both in terms of scarce availability of sources and of ideological restrictions, may accounted for a reasonable delay of several decades. But it is now urgent to remedy the situation before the protagonists of the Russian synthesis are definitely classified under the wrong labels in the pantheon of economic thought. To accomplish this task, it has seldom be sufficient to gather together the various existing studies on aspects of this story. It as been necessary to return to the primary sources in the Russian language. The most important part of the primary literature has never been translated, and in the last years only some of them have been republished in Russian. Therefore, most translations from the Russian have been made by the author of the present dissertation. The secondary literature has been surveyed in the languages that are familiar (Russian, English and French) or almost familiar (German) to the present author, and which are hopefully the most pertinent to the present investigation. Besides, and in order to increase the acquaintance with the text, which was the objective of all this, some archival sources were used. The analysis consists of careful chronological studies of the authors' writings and their evolution in their historical and intellectual context. As a consequence, the dissertation brings new authors to the foreground - Shaposhnikov and Yurovsky - who were traditionally confined to the substitutes' bench, because they only superficially touched the domains quoted above. In the Russian synthesis however, they played an important part of the story. As a side effect, some authors that used to play in the foreground - Dmitriev and Bortkiewicz - are relegated to the background, but are not forgotten. Besides, the dissertation refreshes the views on authors already known, such as Ziber and, especially, Tugan-Baranovsky. The ultimate objective of this dissertation is to change the opinion that one could have on "value and prices in Russian economic thought", by setting the Russian synthesis at the centre of the debates.

The hotel industry and its importance in the technical and economic development of a region : the Lake Geneva case (1852-1914)

The historiography dedicated to tourism has emphasised how some socio-economic evolutions such as urbanisation, mechanisation of transport or the advent of leisure time in society have supported pleasure trips and therefore the development of the hotel industry. On the contrary, the research has too often neglected or at least minimised the impact of the hotel sector on a region's development. This contribution seeks to fill this gap by analysing the Geneva Lake region, one of the most important birthplaces of the European tourism. In this space not much touched by the first industrial revolution, the hotel business has in fact played the role of an economic motor, stimulating investment and employment. This dynamism provoked a domino effect on several other sectors of the economy (industry, bulding sector, banking). To please their customers, the hoteliers have not only given impulses on housing modernisation, but also to the revitalisation of transport, energy and communication networks. The necessity to remain on the state-of-the-art of technical issues, with the concern of competitiveness, has called forth an acceleration of the technology transfer and stimulated the constitution of technical know-how.

Nanotechnology: balancing benefits and risks to public health and the environment : expert paper

Nanotechnology has been heralded as a "revolution" in science, for two reasons: first, because of its revolutionary view of the way in which chemicals and elements, such as gold and silver, behave, compared to traditional scientific understanding of their properties. Second, the impact of these new discoveries, as applied to commerce, can transform the daily life of consumer products ranging from sun tan lotions and cosmetics, food packaging and paints and coatings for cars, housing and fabrics, medicine and thousands of industrial processes.9 Beneficial consumer use of nanotechnologies, already in the stream of commerce, improves coatings on inks and paints in everything from food packaging to cars. Additionally, "Nanomedicine" offers the promise of diagnosis and treatment at the molecular level in order to detect and treat presymptomatic disease,10 or to rebuild neurons in Alzheimer's and Parkinson's disease. There is a possibility that severe complications such as stroke or heart attack may be avoided by means of prophylactic treatment of people at risk, and bone regeneration may keep many people active who never expected rehabilitation. Miniaturisation of diagnostic equipment can also reduce the amount of sampling materials required for testing and medical surveillance. Miraculous developments, that sound like science fiction to those people who eagerly anticipate these medical products, combined with the emerging commercial impact of nanotechnology applications to consumer products will reshape civil society - permanently. Thus, everyone within the jurisdiction of the Council of Europe is an end-user of nanotechnology, even without realising that nanotechnology has touched daily life.

Appendix: expert paper

Nanotechnology has been heralded as a "revolution" in science, for two reasons: first, because of its revolutionary view of the way in which chemicals and elements, such as gold and silver, behave, compared to traditional scientific understanding of their properties. Second, the impact of these new discoveries, as applied to commerce, can transform the daily life of consumer products ranging from sun tan lotions and cosmetics, food packaging and paints and coatings for cars, housing and fabrics, medicine and thousands of industrial processes.9 Beneficial consumer use of nanotechnologies, already in the stream of commerce, improves coatings on inks and paints in everything from food packaging to cars. Additionally, "Nanomedicine" offers the promise of diagnosis and treatment at the molecular level in order to detect and treat presymptomatic disease,10 or to rebuild neurons in Alzheimer's and Parkinson's disease. There is a possibility that severe complications such as stroke or heart attack may be avoided by means of prophylactic treatment of people at risk, and bone regeneration may keep many people active who never expected rehabilitation. Miniaturisation of diagnostic equipment can also reduce the amount of sampling materials required for testing and medical surveillance. Miraculous developments, that sound like science fiction to those people who eagerly anticipate these medical products, combined with the emerging commercial impact of nanotechnology applications to consumer products will reshape civil society - permanently. Thus, everyone within the jurisdiction of the Council of Europe is an end-user of nanotechnology, even without realising that nanotechnology has touched daily life.

Nouvelles armes thérapeutiques contre le mélanome de stade IV [New therapeutic weapons in stage IV melanoma].

The treatment of stage IV melanoma has been revolutionized over the last years with the development of immunotherapies that, for the first time, have shown a significant benefit in overall survival, as well as with extremely effective targeted therapies, that also led to improved survival. These results are the fruits of an important translational research effort that allowed a rational approach with a very fast clinical development. The treatment of metastatic melanoma is, therefore, an illustration of the new paradigms of modern molecular research in oncology. In this review, we will present the various agents that have made the proof of their clinical benefit, as well as the scientific discoveries that allowed their development. Some of the remaining questions will be touched upon with the ongoing clinical trials. Inclusion of patients in these studies remains the top priority to improve on the clinical care.

A novel set of DIP-STR markers for improved analysis of challenging DNA mixtures.

Currently available molecular biology tools allow forensic scientists to characterize DNA evidence found at crime scenes for a large variety of samples, including those of limited quantity and quality, and achieve high levels of individualization. Yet, standard forensic markers provide limited or no results when applied to mixed DNA samples where the contributors are present in very different proportions (unbalanced DNA mixtures). This becomes an issue mostly for the analysis of trace samples collected on the victim or from touched objects. To this end, we recently proposed an innovative type of genetic marker, named DIP-STR that relies on pairing deletion/insertion polymorphisms (DIP) with standard short tandem repeats (STR). This novel compound marker allows detection of the minor DNA contributor in a DNA mixture of any gender and cellular origin with unprecedented resolution (beyond a DNA ratio of 1:1000). To provide a novel analytical tool useful in practice to common forensic laboratories, this article describes the first set of 10 DIP-STR markers selected according to forensic technical standards. The novel DIP-STR regions are short (between 146 and 271 bp), include only highly polymorphic tri-, tetra- and pentanucleotide tandem repeats and are located on different chromosomes or chromosomal arms to provide statistically independent results. This novel set of DIP-STR can target the amplification of 0.03-0.1 ng of DNA when mixed with a 1000-fold excess of major DNA. DIP-STR relative allele frequencies are estimated based on a survey of 103 Swiss individuals. Finally, this study provides an estimate of the occurrence of informative alleles and a calculation of the corresponding random match probability of the detected minor DIP-STR genotype assessed across 10,506 pairwise conceptual mixtures.