Pore space analysis of beech wood: The vessel network

Water transport in wood is vital for the survival of trees. With synchrotron radiation X-ray tomographic microscopy (SRXTM), it has become possible to characterize and quantify the three-dimensional (3D) network formed by vessels that are responsible for longitudinal transport. In the present study, the spatial size dependence of vessels and the organization inside single growth rings in terms of vessel-induced porosity was studied by SRXTM. Network characteristics, such as connectivity, were deduced by digital image analysis from the processed tomographic data and related to known complex network topologies.

Experimental calcium oxalate crystal production and dissolution by selected wood rot fungi.

Twenty-six species of white-rotting Agaricomycotina fungi (Basidiomycota) were screened for their ability to produce calcium-oxalate (CaOx) crystals in vitro. Most were able to produce CaOx crystals in malt agar medium in the absence of additional calcium. In the same medium enriched with Ca2+, all the species produced CaOx crystals (weddellite or whewellite). Hyphae of four species (Ganoderma lucidum, Polyporus ciliatus, Pycnoporus cinnabarinus, and Trametes versicolor) were found coated with crystals (weddellite/whewellite). The production of CaOx crystals during the growth phase was confirmed by an investigation of the production kinetics for six of the species considered in the initial screening (Pleurotus citrinopileatus, Pleurotus eryngii, Pleurotus ostreatus, P. cinnabarinus, Trametes suaveolens, and T. versicolor). However, the crystals produced during the growth phase disappeared from the medium over time in four of the six species (P. citrinopileatus, P. eryngii, P. cinnabarinus, and T. suaveolens). For P. cinnabarinus, the disappearance of the crystals was correlated with a decrease in the total oxalate concentration measured in the medium from 0.65 μg mm−2 (at the maximum accumulation rate) to 0.30 μg mm−2. The decrease in the CaOx concentration was correlated with a change in mycelia morphology. The oxalate dissolution capability of all the species was also tested in a medium containing calcium oxalate as the sole source of carbon (modified Schlegel medium). Three species (Agaricus blazei, Pleurotus tuberregium, and P. ciliatus) presented a dissolution halo around the growth zone. This study shows that CaOx crystal production is a widespread phenomenon in white-rot fungi, and that an excess of Ca2+ can enhance CaOx crystal production. In addition, it shows that some white-rot fungal species are capable of dissolving CaOx crystals after growth has ceased. These results highlight a diversity of responses around the production or dissolution of calcium oxalate in white-rot fungi and reveal an unexpected potential importance of fungi on the oxalate cycle in the environment.

The tobacco industry's past role in weight control related to smoking.

BACKGROUND: Smoking is thought to produce an appetite-suppressing effect by many smokers. Thus, the fear of body weight gain often outweighs the perception of health benefits associated with smoking cessation, particularly in adolescents. We examined whether the tobacco industry played a role in appetite and body weight control related to smoking and smoking cessation. METHODS: We performed a systematic search within the archives of six major US and UK tobacco companies (American Tobacco, Philip Morris, RJ Reynolds, Lorillard, Brown & Williamson and British American Tobacco) that were Defendants in tobacco litigation settled in 1998. Findings are dated from 1949 to 1999. RESULTS: The documents revealed the strategies planned and used by the industry to enhance effects of smoking on weight and appetite, mostly by chemical modifications of cigarettes contents. Appetite-suppressant molecules, such as tartaric acid and 2-acetylpyridine were added to some cigarettes. CONCLUSION: These tobacco companies played an active and not disclaimed role in the anti-appetite effects of smoking, at least in the past, by adding appetite-suppressant molecules into their cigarettes.

The tobacco industry's past role in weight control related to smoking

Résumé (français)ContexteLe tabagisme est connu pour produire un effet coupe-faim chez la plupart des fumeurs. La crainte de la prise de poids à l'arrêt de la cigarette l'emporte souvent sur la perception des bénéfices sur la santé associés à l'abandon du tabac, particulièrement chez les adolescents. Nous avons examiné quel a été le rôle de l'industrie du tabac dans cet effet de la fumée sur l'appétit et sur le contrôle du poids.MéthodesNous avons réalisé une recherche systématique dans les archives de six grandes compagnies de tabac américaines et du Royaume-Uni (American Tobacco, Philip Morris, RJ Reynolds, Lorillard, Brown & Williamson et British American Tobacco) qui avaient été mises en cause dans les procès du tabac en 1998 aux Etats-Unis. Les résultats concernent les années 1949 à 1999.RésultatsLes archives de ces industries montrent qu'elles ont mis au point et ont utilisé diverses stratégies pour améliorer les effets du tabagisme sur le poids et l'appétit, la plupart du temps en réalisant des modifications chimiques des cigarettes. Des substances coupe-faim, telles que l'acide tartrique et le 2-acétylpyridine ont notamment été ajoutées aux cigarettes.ConclusionEn tout cas par le passé, ces compagnies de tabac ont activement modifié leurs cigarettes afin d'en augmenter l'effet de diminution de l'appétit, notamment en y ajoutant des substances coupe-faim.

Nanoparticle usage and protection measures in the manufacturing industry : a representative survey

Addressing the risks of nanoparticles requires knowledge about release into the environment and occupational exposure. However, such information currently is not systematically collected; therefore, this risk assessment lacks quantitative data. The goal was to evaluate the current level of nanoparticle usage in Swiss industry as well as health, safety, and environmental measures, and the number of potentially exposed workers. A representative, stratified mail survey was conducted among 1626 clients of the Swiss National Accident Insurance Fund (SUVA), which insures 80,000 manufacturing firms, representing 84% of all Swiss manufacturing companies (947 companies answered the survey for a 58.3% response rate). The extrapolation to all Swiss manufacturing companies results in 1309 workers (95% confidence interval [CI]: 1073 to 1545) potentially exposed to nanoparticles in 586 companies (95% CI: 145 to 1027). This corresponds to 0.08% of workers (95% CI: 0.06% to 0.09%) and to 0.6% of companies (95% CI: 0.2% to 1.1%). The industrial chemistry sector showed the highest percentage of companies using nanoparticles (21.2%). Other important sectors also reported nanoparticles. Personal protection equipment was the predominant protection strategy. Only a few applied specific environmental protection measures. This is the first nationwide representative study on nanoparticle use in the manufacturing sector. The information gained can be used for quantitative risk assessment. It can also help policymakers design strategies to support companies developing a safer use of nanomaterial. Notingthe current low use of nanoparticles, there is still time to proactively introduce protective methods. If the predicted "nano-revolution" comes true, now is the time to take action. [Supplementary materials are available for this article. Go to the publisher's online edition of Journal of occupational and Environmental Hygiene for the following free supplemental resource: a pdf file containing a detailed description of the approach to statistical analyses, English translation of the questionnaire, additional information for Figure 1, and additional information for the SUVA-code.] [Authors]

False phylogenies on wood mice due to cryptic cytochrome-b pseudogene.

The phylogeny and phylogeography of the Old World wood mice (subgenus Sylvaemus, genus Apodemus, Muridae) are well-documented. Nevertheless, the distributions of species, such as A. fulvipectus and A. ponticus remain dubious, as well as their phylogenetic relationships with A. sylvaticus. We analysed samples of Apodemus spp. across Europe using the mitochondrial cytochrome-b gene (cyt-b) and compared the DNA and amino-acid compositions of previously published sequences. The main result stemming from this study is the presence of a well-differentiated lineage of Sylvaemus including samples of various species (A. sylvaticus, A. fulvipectus, A. ponticus) from distant locations, which were revealed to be nuclear copies of the mitochondrial cyt-b. The presence of this cryptic pseudogene in published sequences is supported by different pathways. This has led to important errors in previous molecular trees and hence to partial misinterpretations in the phylogeny of Apodemus.

Prophylaxis with resin in wood ants

Animals may use plant compounds to defend themselves against parasites. Wood ants, Formica paralugubris, incorporate pieces of solidified conifer resin into their nests. This behaviour inhibits the growth of bacteria and fungi in nest material and protects the ants against some detrimental microorganisms. Here, we studied the resin-collecting behaviour of ants under field and laboratory conditions. First, we focused on an important assumption of the self-medication hypothesis, which is that the animals deliberately choose the active plant material. In field cafeteria tests, the ants indeed showed a strong preference for resin over twigs and stones, which are building materials commonly encountered in their environment. We detected seasonal variation in the choice of ants: the preference for resin over twigs was more pronounced in spring than in summer, whereas in autumn the ants collected twigs and resin at equal rates. Second, we found almost similar seasonal patterns when comparing the collecting rates of pieces of wood that had been impregnated with turpentine (a distillate of oleoresin) and untreated pieces of wood, which reveals that the preference for resin is based on odour cues. Third, we tested whether the collection of resin is prophylactic or therapeutic. We found that the relative collection rate of resin versus stones did not depend on an experimental infection with the entomopathogenic fungus Metarhizium anisopliae in laboratory colonies. Together, these results show that the ants deliberately choose the resin and suggest that resin collection is prophylactic rather than therapeutic.

Molecular markers allow sibling species identification in red wood ants (Formica rufa group)

Red wood ants (Formica rufa group) constitute a group of species that are considered to be among the most promising bioindicators in forest ecosystems. However, because of their morphological similarity and intraspecific variability, morphological species identification can be difficult. Considerable expertise is necessary to discriminate between the sibling species F. lugubris and F. paralugubris, two species that often live in sympatry in the same Alpine forests. New taxonomic tools providing rapid and reliable species identification are needed. We present a simple and reliable molecular technique based on mtDNA (COI gene) and a restriction enzyme for discriminating between F. lugubris and F. paralugubris. We confirm the validity of this method with a Bayesian analysis based on microsatellites. This new molecular tool represents a clear breakthrough for discriminating between F. lugubris and F. paralugubris and is likely to be helpful in large-scale biomonitoring.