How to set up and apply reference levels in fluoroscopy at a national level.

A nationwide survey was launched to investigate the use of fluoroscopy and establish national reference levels (RL) for dose-intensive procedures. The 2-year investigation covered five radiology and nine cardiology departments in public hospitals and private clinics, and focused on 12 examination types: 6 diagnostic and 6 interventional. A total of 1,000 examinations was registered. Information including the fluoroscopy time (T), the number of frames (N) and the dose-area product (DAP) was provided. The data set was used to establish the distributions of T, N and the DAP and the associated RL values. The examinations were pooled to improve the statistics. A wide variation in dose and image quality in fixed geometry was observed. As an example, the skin dose rate for abdominal examinations varied in the range of 10 to 45 mGy/min for comparable image quality. A wide variability was found for several types of examinations, mainly complex ones. DAP RLs of 210, 125, 80, 240, 440 and 110 Gy cm2 were established for lower limb and iliac angiography, cerebral angiography, coronary angiography, biliary drainage and stenting, cerebral embolization and PTCA, respectively. The RL values established are compared to the data published in the literature.

A new training set-up for trans-apical aortic valve replacement.

Trans-apical aortic valve replacement (AVR) is a new and rapidly growing therapy. However, there are only few training opportunities. The objective of our work is to build an appropriate artificial model of the heart that can replace the use of animals for surgical training in trans-apical AVR procedures. To reduce the necessity for fluoroscopy, we pursued the goal of building a translucent model of the heart that has nature-like dimensions. A simplified 3D model of a human heart with its aortic root was created in silico using the SolidWorks Computer-Aided Design (CAD) program. This heart model was printed using a rapid prototyping system developed by the Fab@Home project and dip-coated two times with dispersion silicone. The translucency of the heart model allows the perception of the deployment area of the valved-stent without using heavy imaging support. The final model was then placed in a human manikin for surgical training on trans-apical AVR procedure. Trans-apical AVR with all the necessary steps (puncture, wiring, catheterization, ballooning etc.) can be realized repeatedly in this setting.

The de facto independence of regulatory agencies and its consequences for policy making and regulatory outcomes

This dissertation focuses on the practice of regulatory governance, throughout the study of the functioning of formally independent regulatory agencies (IRAs), with special attention to their de facto independence. The research goals are grounded on a "neo-positivist" (or "reconstructed positivist") position (Hawkesworth 1992; Radaelli 2000b; Sabatier 2000). This perspective starts from the ontological assumption that even if subjective perceptions are constitutive elements of political phenomena, a real world exists beyond any social construction and can, however imperfectly, become the object of scientific inquiry. Epistemologically, it follows that hypothetical-deductive theories with explanatory aims can be tested by employing a proper methodology and set of analytical techniques. It is thus possible to make scientific inferences and general conclusions to a certain extent, according to a Bayesian conception of knowledge, in order to update the prior scientific beliefs in the truth of the related hypotheses (Howson 1998), while acknowledging the fact that the conditions of truth are at least partially subjective and historically determined (Foucault 1988; Kuhn 1970). At the same time, a sceptical position is adopted towards the supposed disjunction between facts and values and the possibility of discovering abstract universal laws in social science. It has been observed that the current version of capitalism corresponds to the golden age of regulation, and that since the 1980s no government activity in OECD countries has grown faster than regulatory functions (Jacobs 1999). Following an apparent paradox, the ongoing dynamics of liberalisation, privatisation, decartelisation, internationalisation, and regional integration hardly led to the crumbling of the state, but instead promoted a wave of regulatory growth in the face of new risks and new opportunities (Vogel 1996). Accordingly, a new order of regulatory capitalism is rising, implying a new division of labour between state and society and entailing the expansion and intensification of regulation (Levi-Faur 2005). The previous order, relying on public ownership and public intervention and/or on sectoral self-regulation by private actors, is being replaced by a more formalised, expert-based, open, and independently regulated model of governance. Independent regulation agencies (IRAs), that is, formally independent administrative agencies with regulatory powers that benefit from public authority delegated from political decision makers, represent the main institutional feature of regulatory governance (Gilardi 2008). IRAs constitute a relatively new technology of regulation in western Europe, at least for certain domains, but they are increasingly widespread across countries and sectors. For instance, independent regulators have been set up for regulating very diverse issues, such as general competition, banking and finance, telecommunications, civil aviation, railway services, food safety, the pharmaceutical industry, electricity, environmental protection, and personal data privacy. Two attributes of IRAs deserve a special mention. On the one hand, they are formally separated from democratic institutions and elected politicians, thus raising normative and empirical concerns about their accountability and legitimacy. On the other hand, some hard questions about their role as political actors are still unaddressed, though, together with regulatory competencies, IRAs often accumulate executive, (quasi-)legislative, and adjudicatory functions, as well as about their performance.

Numerical simulation of left ventricular assist device implantations: comparing the ascending and the descending aorta cannulations.

In this work we present numerical simulations of continuous flow left ventricle assist device implantation with the aim of comparing difference in flow rates and pressure patterns depending on the location of the anastomosis and the rotational speed of the device. Despite the fact that the descending aorta anastomosis approach is less invasive, since it does not require a sternotomy and a cardiopulmonary bypass, its benefits are still controversial. Moreover, the device rotational speed should be correctly chosen to avoid anomalous flow rates and pressure distribution in specific location of the cardiovascular tree. With the aim of assessing the differences between these two approaches and device rotational speed in terms of flow rate and pressure waveforms, we set up numerical simulations of network of one-dimensional models where we account for the presence of an outflow cannula anastomosed to different locations of the aorta. Then, we use the resulting network to compare the results of the two different cannulations for several stages of heart failure and different rotational speed of the device. The inflow boundary data for the heart and the cannulas are obtained from a lumped parameters model of the entire circulatory system with an assist device, which is validated with clinical data. The results show that ascending and descending aorta cannulations lead to similar waveforms and mean flow rate in all the considered cases. Moreover, regardless of the anastomosis region, the rotational speed of the device has an important impact on wave profiles; this effect is more pronounced at high RPM.

Registries in rheumatological and musculoskeletal conditions. Paediatric Behçet's disease: an international cohort study of 110 patients. One-year follow-up data.

OBJECTIVE: To set-up an international cohort of patients suspected with Behçet's disease (BD). The cohort is aimed at defining an algorithm for definition of the disease in children. METHODS: International experts have defined the inclusion criteria as follows: recurrent oral aphthosis (ROA) plus one of following-genital ulceration, erythema nodosum, folliculitis, pustulous/acneiform lesions, positive pathergy test, uveitis, venous/arterial thrombosis and family history of BD. Onset of disease is <16 years, disease duration is ≤3 years, future follow-up duration is ≥4 years and informed consent is obtained. The expert committee has classified the included patients into: definite paediatric BD (PED-BD), probable PED-BD and no PED-BD. Statistical analysis is performed to compare the three groups of patients. Centres document their patients into a single database. RESULTS: At January 2010, 110 patients (56 males/54 females) have been included. Mean age at first symptom: 8.1 years (median 8.2 years). At inclusion, 38% had only one symptom associated with ROA, 31% had two and 31% had three or more symptoms. A total of 106 first evaluations have been done. Seventeen patients underwent the first-year evaluation, and 36 had no new symptoms, 12 had one and 9 had two. Experts have examined 48 files and classified 30 as definite and 18 as probable. Twenty-six patients classified as definite fulfilled the International Study Group criteria. Seventeen patients classified as probable did not meet the international criteria. CONCLUSION: The expert committee has classified the majority of patients in the BD group although they presented with few symptoms independently of BD classification criteria.

Automatic selection of tidal volume, respiratory frequency and minute ventilation in intubated ICU patients as start up procedure for closed-loop controlled ventilation.

OBJECTIVE: Before a patient can be connected to a mechanical ventilator, the controls of the apparatus need to be set up appropriately. Today, this is done by the intensive care professional. With the advent of closed loop controlled mechanical ventilation, methods will be needed to select appropriate start up settings automatically. The objective of our study was to test such a computerized method which could eventually be used as a start-up procedure (first 5-10 minutes of ventilation) for closed-loop controlled ventilation. DESIGN: Prospective Study. SETTINGS: ICU's in two adult and one children's hospital. PATIENTS: 25 critically ill adult patients (age > or = 15 y) and 17 critically ill children selected at random were studied. INTERVENTIONS: To stimulate 'initial connection', the patients were disconnected from their ventilator and transiently connected to a modified Hamilton AMADEUS ventilator for maximally one minute. During that time they were ventilated with a fixed and standardized breath pattern (Test Breaths) based on pressure controlled synchronized intermittent mandatory ventilation (PCSIMV). MEASUREMENTS AND MAIN RESULTS: Measurements of airway flow, airway pressure and instantaneous CO2 concentration using a mainstream CO2 analyzer were made at the mouth during application of the Test-Breaths. Test-Breaths were analyzed in terms of tidal volume, expiratory time constant and series dead space. Using this data an initial ventilation pattern consisting of respiratory frequency and tidal volume was calculated. This ventilation pattern was compared to the one measured prior to the onset of the study using a two-tailed paired t-test. Additionally, it was compared to a conventional method for setting up ventilators. The computer-proposed ventilation pattern did not differ significantly from the actual pattern (p > 0.05), while the conventional method did. However the scatter was large and in 6 cases deviations in the minute ventilation of more than 50% were observed. CONCLUSIONS: The analysis of standardized Test Breaths allows automatic determination of an initial ventilation pattern for intubated ICU patients. While this pattern does not seem to be superior to the one chosen by the conventional method, it is derived fully automatically and without need for manual patient data entry such as weight or height. This makes the method potentially useful as a start up procedure for closed-loop controlled ventilation.

Wireless GPS-based phase-locked synchronization system for outdoor environment.

Synchronization of data coming from different sources is of high importance in biomechanics to ensure reliable analyses. This synchronization can either be performed through hardware to obtain perfect matching of data, or post-processed digitally. Hardware synchronization can be achieved using trigger cables connecting different devices in many situations; however, this is often impractical, and sometimes impossible in outdoors situations. The aim of this paper is to describe a wireless system for outdoor use, allowing synchronization of different types of - potentially embedded and moving - devices. In this system, each synchronization device is composed of: (i) a GPS receiver (used as time reference), (ii) a radio transmitter, and (iii) a microcontroller. These components are used to provide synchronized trigger signals at the desired frequency to the measurement device connected. The synchronization devices communicate wirelessly, are very lightweight, battery-operated and thus very easy to set up. They are adaptable to every measurement device equipped with either trigger input or recording channel. The accuracy of the system was validated using an oscilloscope. The mean synchronization error was found to be 0.39 μs and pulses are generated with an accuracy of <2 μs. The system provides synchronization accuracy about two orders of magnitude better than commonly used post-processing methods, and does not suffer from any drift in trigger generation.

Mise en place d'un programme de prévention et de prise en charge du diabète en Suisse: le point de vue des patients et des professionnels de la santé [Implementation of a diabetes disease management program in Switzerland: patients' and healthcare professionals' point of view].

BACKGROUND: A reorganization of healthcare systems is required to meet the challenge of the increasing prevalence of chronic diseases, e.g. diabetes. In North-America and Europe, several countries have thus developed national or regional chronic disease management programs. In Switzerland, such initiatives have only emerged recently. In 2010, the canton of Vaud set up the "Diabetes Cantonal Program", within the framework of which we conducted a study designed to ascertain the opinions of both diabetic patients and healthcare professionals on the elements that could be integrated into this program, the barriers and facilitators to its development, and the incentives that could motivate these actors to participate. METHODS: We organized eight focus-groups: one with diabetic patients and one with healthcare professionals in the four sanitary areas of the canton of Vaud. The discussions were recorded, transcribed and submitted to a thematic content analysis. RESULTS: Patients and healthcare professionals were rather in favour of the implementation of a cantonal program, although patients were more cautious concerning its necessity. All participants envisioned a set of elements that could be integrated to this program. They also considered that the program could be developed more easily if it were adapted to patients' and professionals' needs and if it used existing structures and professionals. The difficulty to motivate both patients and professionals to participate was mentioned as a barrier to the development of this program however. Quality or financial incentives could therefore be created to overcome this potential problem. CONCLUSION: The identification of the elements to consider, barriers, facilitators and incentives to participate to a chronic disease management program, obtained by exploring the opinions of patients and healthcare professionals, should favour its further development and implementation.

Cancer du sein chez la jeune femme: traitements adjuvants et désir de grossesse [Breast cancer in young women: adjuvant therapy and fertility]

Prognosis of breast cancer women has been dramatically improved by the adjuvant therapies. As the vast majority of patients are cured, the importance of long-term quality of life is growing. The question of the maternity is an essential concern for the young women who have to receive chemotherapy or several years of endocrine therapy. This problem is often underestimated and may lead to emotional distress, depression or anxiety. A regional multidisciplinary working group was set up in order to offer optimal information about fertility and cancer as to propose specific therapeutic reproduction options, when applicable. Specificity of the young patients' breast cancer, the treatment approaches and their impact on fertility are discussed in this paper.

Implementation of robotic laparoscopic cholecystectomy in a university hospital.

BACKGROUND: Robot surgery is a further step towards new potential developments in minimally invasive surgery. Surgeons must keep abreast of these new technologies and learn their limits and possibilities. Robot-assisted laparoscopic cholecystectomy has not yet been performed in our institution. The purpose of this report is to present the pathway of implementation of robotic laparoscopic cholecystectomy in a university hospital. METHODS: The Zeus(R) robot system was used. Experimental training was performed on animals. The results of our experimental training allowed us to perform our first two clinical cases. RESULTS: Robot arm set-up and trocar placement required 53 and 35 minutes. Operative time were 59 and 45 minutes respectively. The overall operative time was 112 and 80 minutes, respectively. There were no intraoperative complications. Patients were discharged from the hospital after an overnight stay. CONCLUSION: Robotic laparoscopic cholecystectomy is safe and patient recovery similar to those of standard laparoscopy. At present, there are no advantages of robotic over conventional surgery. Nevertheless, robots have the potential to revolutionise the way surgery is performed. Robot surgery is not reserved for a happy few. This technology deserves more attention because it has the potential to change the way surgery is performed.

The endodermis--development and differentiation of the plant's inner skin.

Controlling external compound entrance is essential for plant survival. To set up an efficient and selective sorting of nutrients, free diffusion via the apoplast in vascular plants is blocked at the level of the endodermis. Although we have learned a lot about endodermal specification in the last years, information regarding its differentiation is still very limited. A differentiated endodermal cell can be defined by the presence of the "Casparian strip" (CS), a cell wall modification described first by Robert Caspary in 1865. While the anatomical description of CS in many vascular plants has been very detailed, we still lack molecular information about the establishment of the Casparian strips and their actual function in roots. The recent isolation of a novel protein family, the CASPs, that localizes precisely to a domain of the plasma membrane underneath the CS represents an excellent point of entry to explore CS function and formation. In addition, it has been shown that the endodermis contains transporters that are localized to either the central (stele-facing) or peripheral (soil-facing) plasma membranes. These features suggest that the endodermis functions as a polar plant epithelium.

Characterisation of heteromers and oligomers in the TNF family of ligands and receptors

TNF family ligands and receptors fulfill a number of functions, mainly in the immune system. For example, the ligands BAFF and APRIL control growth and survival of mature Β cells at various stages of differentiation. TNF family ligands usually form homotrimers, but heteromers have also been described for lymphotoxin α1β2 and for BAFF and APRIL. Interestingly, twenty BAFF homotrimers can assemble into virus-like particles coined BAFF 60-mer, which are superior to BAFF 3-mer regarding their ability to signal in primary Β cells. A screen was performed in 293T cells, by co-transfecting differently tagged ligands, to identify six novel heteromers. The specificity of these novel heteromers, however, did not correspond to that of orphan receptors in the TNFR family. Little is known about heteromers of BAFF and APRIL, in particular their receptor-binding specificity and their ability to signal. A method to produce and purify heteromers of defined stoechiometry was developed, and the resulting reagents were used to demonstrate that BAFF2APRIL, like BAFF, binds to all BAFF receptors - namely BAFFR, TACI and Β CM A -, while APRIL2BAFF and APRIL only binds to TACI and BCMA. Heteromers could signal via their cognate receptors, sometimes as potently and sometimes less potently than homomers, depending on the receptors. A promising system to measure the activity of single-chain homo- and heteromers in vivo was set up: it measures mature Β cell rescue upon administration of single-chain ligands into BAFF-ko mice. To tackle the question of the physiological importance of BAFF 60-mer, a point mutation that prevents assembly of mouse BAFF into 60-mer while retaining its ability to form trimers was identified. This mutation (E247K) was introduced by homologous recombination into mouse embryonic stem cells that are now being used to generate knock-in mice. Results obtained in this work will help to better understand the role of various BAFF and APRIL forms that are elevated in a several autoimmune diseases. - Les ligands et récepteurs de la famille du TNF joue un rôle prédominant dans le système immunitaire. Par exemple, les ligands BAFF et APRIL contrôlent la croissance et la survie des cellules Β matures à différents stades de différenciation. Ces ligands existent souvent sous forme d'homotrimères (3-mer), bien que des héteromères aient été décrits pour la lymphotoxine α1β2 et pour BAFF et APRIL. Dans le cas de BAFF, vingt trimères peuvent, telle une particule virale, s'assembler en 60-mer qui surpasse le 3-mer pour signaler dans des cellules Β primaires. Un crible effectué dans des cellules 293T, par co-transfection de ligands différemment marqués, a permis d'identifier six nouveaux heteromères dont la spécificité n'a, hélas, pas correspondu à celle d'un récepteur orphelin de la famille du TNFR. Les connaissances sur la spécificité de liaison aux récepteurs et la capacité à signaler des heteromères de BAFF et d'APRIL sont fragmentaires. Une méthode pour produire et purifier des heteromères "simple chaîne" de stoechiométrie déterminée a été mise au point, et les réactifs ainsi obtenus utilisés pour démontrer que BAFF2APRIL, comme BAFF, lie tous les récepteurs de BAFF - c'est-à-dire BAFFR, TACI et BCMA -, alors qu'APRIL2BAFF et APRIL ne lient que TACI et BCMA. Les héteromères peuvent transmettre des signaux, parfois aussi bien et parfois plus faiblement que les homomères, selon les récepteurs. Un système prometteur pour mesurer l'activité des ligands simple chaîne in vivo a été mis au point. Il mesure la réapparition de cellules Β matures dans des souris déficientes pour BAFF après administration des ligands. Pour s'attaquer à la question de l'importance physiologique du 60-mer de BAFF, ime mutation empêchant l'assemblage en 60-mer sans affecter la capacité à former des trimères a été identifiée. Cette mutation (E247K) a été introduite par recombinaison homologue dans des cellules souches embryonnaires de souris qui sont utilisées pour obtenir des souris déficientes en BAFF 60-mer. Les résultats de ces travaux contribueront à mieux cerner le rôle des différentes formes de BAFF et d'APRIL produites en excès dans plusieurs maladies auto-immunes.

3D geoelectrical monitoring to follow hydric soil behaviour during rainfall

RESUME Durant les dernières années, les méthodes électriques ont souvent été utilisées pour l'investigation des structures de subsurface. L'imagerie électrique (Electrical Resistivity Tomography, ERT) est une technique de prospection non-invasive et spatialement intégrée. La méthode ERT a subi des améliorations significatives avec le développement de nouveaux algorithmes d'inversion et le perfectionnement des techniques d'acquisition. La technologie multicanale et les ordinateurs de dernière génération permettent la collecte et le traitement de données en quelques heures. Les domaines d'application sont nombreux et divers: géologie et hydrogéologie, génie civil et géotechnique, archéologie et études environnementales. En particulier, les méthodes électriques sont souvent employées dans l'étude hydrologique de la zone vadose. Le but de ce travail est le développement d'un système de monitorage 3D automatique, non- invasif, fiable, peu coûteux, basé sur une technique multicanale et approprié pour suivre les variations de résistivité électrique dans le sous-sol lors d'événements pluvieux. En raison des limitations techniques et afin d'éviter toute perturbation physique dans la subsurface, ce dispositif de mesure emploie une installation non-conventionnelle, où toutes les électrodes de courant sont placées au bord de la zone d'étude. Le dispositif le plus approprié pour suivre les variations verticales et latérales de la résistivité électrique à partir d'une installation permanente a été choisi à l'aide de modélisations numériques. Les résultats démontrent que le dispositif pôle-dipôle offre une meilleure résolution que le dispositif pôle-pôle et plus apte à détecter les variations latérales et verticales de la résistivité électrique, et cela malgré la configuration non-conventionnelle des électrodes. Pour tester l'efficacité du système proposé, des données de terrain ont été collectées sur un site d'étude expérimental. La technique de monitorage utilisée permet de suivre le processus d'infiltration 3D pendant des événements pluvieux. Une bonne corrélation est observée entre les résultats de modélisation numérique et les données de terrain, confirmant par ailleurs que le dispositif pôle-dipôle offre une meilleure résolution que le dispositif pôle-pôle. La nouvelle technique de monitorage 3D de résistivité électrique permet de caractériser les zones d'écoulement préférentiel et de caractériser le rôle de la lithologie et de la pédologie de manière quantitative dans les processus hydrologiques responsables d'écoulement de crue. ABSTRACT During the last years, electrical methods were often used for the investigation of subsurface structures. Electrical resistivity tomography (ERT) has been reported to be a useful non-invasive and spatially integrative prospecting technique. The ERT method provides significant improvements, with the developments of new inversion algorithms, and the increasing efficiency of data collection techniques. Multichannel technology and powerful computers allow collecting and processing resistivity data within few hours. Application domains are numerous and varied: geology and hydrogeology, civil engineering and geotechnics, archaeology and environmental studies. In particular, electrical methods are commonly used in hydrological studies of the vadose zone. The aim of this study was to develop a multichannel, automatic, non-invasive, reliable and inexpensive 3D monitoring system designed to follow electrical resistivity variations in soil during rainfall. Because of technical limitations and in order to not disturb the subsurface, the proposed measurement device uses a non-conventional electrode set-up, where all the current electrodes are located near the edges of the survey grid. Using numerical modelling, the most appropriate arrays were selected to detect vertical and lateral variations of the electrical resistivity in the framework of a permanent surveying installation system. The results show that a pole-dipole array has a better resolution than a pole-pole array and can successfully follow vertical and lateral resistivity variations despite the non-conventional electrode configuration used. Field data are then collected at a test site to assess the efficiency of the proposed monitoring technique. The system allows following the 3D infiltration processes during a rainfall event. A good correlation between the results of numerical modelling and field data results can be observed since the field pole-dipole data give a better resolution image than the pole-pole data. The new device and technique makes it possible to better characterize the zones of preferential flow and to quantify the role of lithology and pedology in flood- generating hydrological processes.

Measuring the diffusion of palliative care in long-term care facilities - a death census

ABSTRACT: BACKGROUND: The dissemination of palliative care for patients presenting complex chronic diseases at various stages has become an important matter of public health. A death census in Swiss long-term care facilities (LTC) was set up with the aim of monitoring the frequency of selected indicators of palliative care. METHODS: The survey covered 150 LTC facilities (105 nursing homes and 45 home health services), each of which was asked to complete a questionnaire for every non-accidental death over a period of six months. The frequency of 4 selected indicators of palliative care (resort to a specialized palliative care service, the administration of opiates, use of any pain measurement scale or other symptom measurement scale) was monitored in respect of the stages of care and analysed based on gender, age, medical condition and place of residence. RESULTS: Overall, 1200 deaths were reported, 29.1% of which were related to cancer. The frequencies of each indicator varied according to the type of LTC, mostly regarding the administration of opiate. It appeared that the access to palliative care remained associated with cancer, terminal care and partly with age, whereas gender and the presence of mental disorders had no effect on the indicators. In addition, the use of drugs was much more frequent than the other indicators. CONCLUSION: The profile of patients with access to palliative care must become more diversified. Among other recommendations, equal access to opiates in nursing homes and in home health services, palliative care at an earlier stage and the systematic use of symptom management scales when resorting to opiates have to become of prime concern.