Anxiety and severity of illicit substance use in adolescence: Evaluating the mediating role of perceived coping styles

The purpose of this study was to examine whether coping styles (Active coping, Internal coping and Withdrawal coping) mediated the relationships between anxiety and severity of illicit substance use among a sample of 110 Swiss adolescents ages 12-19 (M=16.3, SD=1.66). The current study tested two competing models of anxiety on severity of illicit substance use. In the first model, we tested the direct effect of trait anxiety (STAI-Y anxiety score) on severity of illicit substance use (ADAD drug use severity rating), while in the second models we examined the mediating role of coping styles in the link between trait anxiety and severity of illicit substance use. Path models indicated that the associations between trait anxiety and severity of illicit substance use are partially mediated by active and withdrawal coping styles. Limitations of the findings and implications for prevention of substance use in adolescence are discussed.

Wear of two denture teeth materials in vivo-2-year results.

OBJECTIVE: (1) To quantify wear of two different denture tooth materials in vivo with two study designs, (2) to relate tooth variables to vertical loss. METHODS: Two different denture tooth materials had been used (experimental material=test; DCL=control). In study 1 (split-mouth, 6 test centers) 60 subjects received complete dentures, in study 2 (two-arm, 1 test center) 29 subjects. In study 1 the mandibular dentures were supported by implants in 33% of the subjects, in study 2 only in 3% of the subjects. Impressions of the dentures were taken and poured with improved stone at baseline and after 6, 12, 18 and 24 months. Each operator evaluated the wear subjectively. Wear analysis was carried out with a laser scanning device. Maximal vertical loss of the attrition zones was calculated for each tooth cusp and tooth. A mixed linear model was used to statistically analyse the logarithmically transformed wear data. RESULTS: Due to drop-outs and unmatchable casts, only 47 subjects of study 1 and 14 of study 2 completed the 2-year recall. Overall, 75% of all teeth present could be analysed. There was no statistically difference in the overall wear between the test and control material for either study 1 or study 2. The relative increase in wear over time was similar in both study designs. However, a strong subject effect and center effect were observed. The fixed factors included in the model (time, tooth, center, etc.) accounted for 43% of the variability, whereas the random subject effect accounted for another 30% of the variability, leaving about 28% of unexplained variability. More wear was consistently recorded in the maxillary teeth compared to the mandibular teeth and in the first molar teeth compared to the premolar teeth and the second molars. Likewise, the supporting cusps showed more wear than the non-supporting cusps. The amount of wear did not depend on whether or not the lower dentures were supported by implants. The subjective wear was correct in about 67% of the cases if it is postulated that a wear difference of 100μm should be subjectively detectable. SIGNIFICANCE: The clinical wear of denture teeth is highly variable with a strong patient effect. More wear can be expected in maxillary denture teeth compared to mandibular teeth, first molars compared to premolars and supported cusps compared to non-supported cusps. Laboratory data on the wear of denture tooth materials may not be confirmed in well-structured clinical trials probably due to the large inter-individual variability.

Assessing the added value of wastewater-based epidemiology to monitor illicit drug use

Wastewater-based epidemiology consists in acquiring relevant information about the lifestyle and health status of the population through the analysis of wastewater samples collected at the influent of a wastewater treatment plant. Whilst being a very young discipline, it has experienced an astonishing development since its firs application in 2005. The possibility to gather community-wide information about drug use has been among the major field of application. The wide resonance of the first results sparked the interest of scientists from various disciplines. Since then, research has broadened in innumerable directions. Although being praised as a revolutionary approach, there was a need to critically assess its added value, with regard to the existing indicators used to monitor illicit drug use. The main, and explicit, objective of this research was to evaluate the added value of wastewater-based epidemiology with regards to two particular, although interconnected, dimensions of illicit drug use. The first is related to trying to understand the added value of the discipline from an epidemiological, or societal, perspective. In other terms, to evaluate if and how it completes our current vision about the extent of illicit drug use at the population level, and if it can guide the planning of future prevention measures and drug policies. The second dimension is the criminal one, with a particular focus on the networks which develop around the large demand in illicit drugs. The goal here was to assess if wastewater-based epidemiology, combined to indicators stemming from the epidemiological dimension, could provide additional clues about the structure of drug distribution networks and the size of their market. This research had also an implicit objective, which focused on initiating the path of wastewater- based epidemiology at the Ecole des Sciences Criminelles of the University of Lausanne. This consisted in gathering the necessary knowledge about the collection, preparation, and analysis of wastewater samples and, most importantly, to understand how to interpret the acquired data and produce useful information. In the first phase of this research, it was possible to determine that ammonium loads, measured directly in the wastewater stream, could be used to monitor the dynamics of the population served by the wastewater treatment plant. Furthermore, it was shown that on the long term, the population did not have a substantial impact on consumption patterns measured through wastewater analysis. Focussing on methadone, for which precise prescription data was available, it was possible to show that reliable consumption estimates could be obtained via wastewater analysis. This allowed to validate the selected sampling strategy, which was then used to monitor the consumption of heroin, through the measurement of morphine. The latter, in combination to prescription and sales data, provided estimates of heroin consumption in line with other indicators. These results, combined to epidemiological data, highlighted the good correspondence between measurements and expectations and, furthermore, suggested that the dark figure of heroin users evading harm-reduction programs, which would thus not be measured by conventional indicators, is likely limited. In the third part, which consisted in a collaborative study aiming at extensively investigating geographical differences in drug use, wastewater analysis was shown to be a useful complement to existing indicators. In particular for stigmatised drugs, such as cocaine and heroin, it allowed to decipher the complex picture derived from surveys and crime statistics. Globally, it provided relevant information to better understand the drug market, both from an epidemiological and repressive perspective. The fourth part focused on cannabis and on the potential of combining wastewater and survey data to overcome some of their respective limitations. Using a hierarchical inference model, it was possible to refine current estimates of cannabis prevalence in the metropolitan area of Lausanne. Wastewater results suggested that the actual prevalence is substantially higher compared to existing figures, thus supporting the common belief that surveys tend to underestimate cannabis use. Whilst being affected by several biases, the information collected through surveys allowed to overcome some of the limitations linked to the analysis of cannabis markers in wastewater (i.e., stability and limited excretion data). These findings highlighted the importance and utility of combining wastewater-based epidemiology to existing indicators about drug use. Similarly, the fifth part of the research was centred on assessing the potential uses of wastewater-based epidemiology from a law enforcement perspective. Through three concrete examples, it was shown that results from wastewater analysis can be used to produce highly relevant intelligence, allowing drug enforcement to assess the structure and operations of drug distribution networks and, ultimately, guide their decisions at the tactical and/or operational level. Finally, the potential to implement wastewater-based epidemiology to monitor the use of harmful, prohibited and counterfeit pharmaceuticals was illustrated through the analysis of sibutramine, and its urinary metabolite, in wastewater samples. The results of this research have highlighted that wastewater-based epidemiology is a useful and powerful approach with numerous scopes. Faced with the complexity of measuring a hidden phenomenon like illicit drug use, it is a major addition to the panoply of existing indicators. -- L'épidémiologie basée sur l'analyse des eaux usées (ou, selon sa définition anglaise, « wastewater-based epidemiology ») consiste en l'acquisition d'informations portant sur le mode de vie et l'état de santé d'une population via l'analyse d'échantillons d'eaux usées récoltés à l'entrée des stations d'épuration. Bien qu'il s'agisse d'une discipline récente, elle a vécu des développements importants depuis sa première mise en oeuvre en 2005, notamment dans le domaine de l'analyse des résidus de stupéfiants. Suite aux retombées médiatiques des premiers résultats de ces analyses de métabolites dans les eaux usées, de nombreux scientifiques provenant de différentes disciplines ont rejoint les rangs de cette nouvelle discipline en développant plusieurs axes de recherche distincts. Bien que reconnu pour son coté objectif et révolutionnaire, il était nécessaire d'évaluer sa valeur ajoutée en regard des indicateurs couramment utilisés pour mesurer la consommation de stupéfiants. En se focalisant sur deux dimensions spécifiques de la consommation de stupéfiants, l'objectif principal de cette recherche était focalisé sur l'évaluation de la valeur ajoutée de l'épidémiologie basée sur l'analyse des eaux usées. La première dimension abordée était celle épidémiologique ou sociétale. En d'autres termes, il s'agissait de comprendre si et comment l'analyse des eaux usées permettait de compléter la vision actuelle sur la problématique, ainsi que déterminer son utilité dans la planification des mesures préventives et des politiques en matière de stupéfiants actuelles et futures. La seconde dimension abordée était celle criminelle, en particulier, l'étude des réseaux qui se développent autour du trafic de produits stupéfiants. L'objectif était de déterminer si cette nouvelle approche combinée aux indicateurs conventionnels, fournissait de nouveaux indices quant à la structure et l'organisation des réseaux de distribution ainsi que sur les dimensions du marché. Cette recherche avait aussi un objectif implicite, développer et d'évaluer la mise en place de l'épidémiologie basée sur l'analyse des eaux usées. En particulier, il s'agissait d'acquérir les connaissances nécessaires quant à la manière de collecter, traiter et analyser des échantillons d'eaux usées, mais surtout, de comprendre comment interpréter les données afin d'en extraire les informations les plus pertinentes. Dans la première phase de cette recherche, il y pu être mis en évidence que les charges en ammonium, mesurées directement dans les eaux usées permettait de suivre la dynamique des mouvements de la population contributrice aux eaux usées de la station d'épuration de la zone étudiée. De plus, il a pu être démontré que, sur le long terme, les mouvements de la population n'avaient pas d'influence substantielle sur le pattern de consommation mesuré dans les eaux usées. En se focalisant sur la méthadone, une substance pour laquelle des données précises sur le nombre de prescriptions étaient disponibles, il a pu être démontré que des estimations exactes sur la consommation pouvaient être tirées de l'analyse des eaux usées. Ceci a permis de valider la stratégie d'échantillonnage adoptée, qui, par le bais de la morphine, a ensuite été utilisée pour suivre la consommation d'héroïne. Combinée aux données de vente et de prescription, l'analyse de la morphine a permis d'obtenir des estimations sur la consommation d'héroïne en accord avec des indicateurs conventionnels. Ces résultats, combinés aux données épidémiologiques ont permis de montrer une bonne adéquation entre les projections des deux approches et ainsi démontrer que le chiffre noir des consommateurs qui échappent aux mesures de réduction de risque, et qui ne seraient donc pas mesurés par ces indicateurs, est vraisemblablement limité. La troisième partie du travail a été réalisée dans le cadre d'une étude collaborative qui avait pour but d'investiguer la valeur ajoutée de l'analyse des eaux usées à mettre en évidence des différences géographiques dans la consommation de stupéfiants. En particulier pour des substances stigmatisées, telles la cocaïne et l'héroïne, l'approche a permis d'objectiver et de préciser la vision obtenue avec les indicateurs traditionnels du type sondages ou les statistiques policières. Globalement, l'analyse des eaux usées s'est montrée être un outil très utile pour mieux comprendre le marché des stupéfiants, à la fois sous l'angle épidémiologique et répressif. La quatrième partie du travail était focalisée sur la problématique du cannabis ainsi que sur le potentiel de combiner l'analyse des eaux usées aux données de sondage afin de surmonter, en partie, leurs limitations. En utilisant un modèle d'inférence hiérarchique, il a été possible d'affiner les actuelles estimations sur la prévalence de l'utilisation de cannabis dans la zone métropolitaine de la ville de Lausanne. Les résultats ont démontré que celle-ci est plus haute que ce que l'on s'attendait, confirmant ainsi l'hypothèse que les sondages ont tendance à sous-estimer la consommation de cannabis. Bien que biaisés, les données récoltées par les sondages ont permis de surmonter certaines des limitations liées à l'analyse des marqueurs du cannabis dans les eaux usées (i.e., stabilité et manque de données sur l'excrétion). Ces résultats mettent en évidence l'importance et l'utilité de combiner les résultats de l'analyse des eaux usées aux indicateurs existants. De la même façon, la cinquième partie du travail était centrée sur l'apport de l'analyse des eaux usées du point de vue de la police. Au travers de trois exemples, l'utilisation de l'indicateur pour produire du renseignement concernant la structure et les activités des réseaux de distribution de stupéfiants, ainsi que pour guider les choix stratégiques et opérationnels de la police, a été mise en évidence. Dans la dernière partie, la possibilité d'utiliser cette approche pour suivre la consommation de produits pharmaceutiques dangereux, interdits ou contrefaits, a été démontrée par l'analyse dans les eaux usées de la sibutramine et ses métabolites. Les résultats de cette recherche ont mis en évidence que l'épidémiologie par l'analyse des eaux usées est une approche pertinente et puissante, ayant de nombreux domaines d'application. Face à la complexité de mesurer un phénomène caché comme la consommation de stupéfiants, la valeur ajoutée de cette approche a ainsi pu être démontrée.

Disease-driven T cell activation predicts immune responses to vaccination against melanoma.

Tumor vaccines may induce activation and expansion of specific CD8 T cells which can subsequently destroy tumor cells in cancer patients. This phenomenon can be observed in approximately 5-20% of vaccinated melanoma patients. We searched for factors associated with T cell responsiveness to peptide vaccines. Peptide antigen-specific T cells were quantified and characterized ex vivo before and after vaccination. T cell responses occurred primarily in patients with T cells that were already pre-activated before vaccination. Thus, peptide vaccines can efficiently boost CD8 T cells that are pre-activated by endogenous tumor antigen. Our results identify a new state of T cell responsiveness and help to explain and predict tumor vaccine efficacy.

Organisation structurale du noyau et de microtubules de cellules de mammifères observés par cryo-microscopie électronique de sections hydratées

RESUME L'architecture nucléaire ainsi que l'ultrastructure des microtubules ont été abondamment étudiées par des méthodes cytochimiques utilisant des échantillons fixés chimiquement, enrobés dans des résines ou fixés à basse température. Les échantillons fixés à basse température pouvant aussi avoir été substitués, déshydratés et enrobés dans des résines pour la plupart hydrophiles. Ici, nous avons étendu ces études en utilisant la microscopie électronique effectuée sur des sections hydratées (CEMOVIS) permettant d'observer les échantillons dans un état le plus proche de leur état natif. De plus, nous avons effectué de la tomographie électronique sur des sections hydratées (TOVIS) afin d'obtenir une vision tridimensionnelle de : 1) la périphérie du noyau et de la région périchromatinienne et 2) de la lumière des microtubules. Concernant l'architecture nucléaire Nos observations montrent que le nucléole et la chromatine condensée sont facilement visualisés grâce à la texture spécifique qu'ils arborent. Au contraire, la visualisation de domaines nucléaires importants et spécialement ceux qui contiennent des ribonucléoprotéines, est rendue difficile, à cause du faible contraste qui caractérise l'espace interchromatinien. Ceci est essentiellement dû à la quantité d'information présente dans le volume de la section qui semble être superposée, lorsque observée sur des micrographies en deux dimensions. La tomographie nous a permis de mieux visualiser les différentes régions du noyau. Les mottes de chromatine condensée sont décorées à leur périphérie (région périchromatinienne), par nombre de fibrilles et granules. Des tunnels d'espace interchromatinien sont occasionnellement observés en train de traverser des régions de chromatine condensée favorisant l'accès aux pores nucléaires. Enfin, nous avons pu, au niveau d'un pore unique, observer la plupart des structures caractéristiques du complexe de pore nucléaire. Concernant l'ultrastructure des microtubules: Nous avons démontré que la polarité d'un microtubule observé in situ en section transversale, par CEMOVIS, est directement déduite de l'observation de la chiralité de ses protofilaments. Cette chiralité, a été établie précédemment comme étant liée à la morphologie des sous unités de tubuline. La tomographie électronique effectuée sur des sections hydratées, nous a permis d'observer les microtubules dans leur contexte cellulaire avec une résolution suffisante pour visualiser des détails moléculaires, comme les monomères de tubuline. Ainsi, des molécules n'ayant pas encore été caractérisées, ont été observées dans la lumière des microtubules. Ces observations ont été effectuées autant sur des cellules observées en coupe par CEMOVIS que sur des cellules congelées dans leur totalité par immersion dans un bain d'éthane liquide. Enfin, nous avons montré que les microtubules étaient aussi de formidables objets, permettant une meilleure compréhension des artéfacts de coupe occasionnés lors de la préparation des échantillons par CEMOVIS. Les buts des études qui seront menées â la suite de ce travail seront de 1) essayer de localiser des domaines nucléaires spécifiques par des approches cytochimiques avant la congélation des cellules. 2) Appliquer des méthodes de moyennage afin d'obtenir un modèle tridimensionnel de la structure du complexe de pore nucléaire dans son contexte cellulaire. 3) Utiliser des approches biochimiques afin de déterminer la nature exacte des particules qui se trouvent dans la lumière des microtubules. ABSTRACT Nuclear architecture as well as microtubule ultrastructure have been extensively investigated by means of different methods of ultrastructural cytochemistry using chemically fixed and resin embedded samples or following cryofixation, cryosubstitution and embedding into various, especially partially hydrophilic resins. Here, we extend these studies using cryoelectron microscopy of vitreous sections (CEMOVIS) which allows one to observe the specimen as close as possible to its native state. Furthermore, we applied cryoelectron tomography of vitreous sections (TOVIS) in order to obtain athree-dimensional view of: 1) the nuclear periphery, and of the perichromatin region, and 2) the microtubule lumen. Concerning the nuclear architecture: Our observations show that nucleoli and condensed chromatin are well recognisable due to their specific texture. Conversely, the visualisation of other important nuclear domains, especially those containing ribonucleoproteins, is seriously hampered by a generally low contrast of the interchromatin region. This is mainly due to the plethora of information superposed in the volume of the section observed on two-dimensional micrographs. Cryoelectron tomography allowed us to better visualise nuclear regions. Condensed chromatin clumps are decorated on their periphery, the perichromatin region, by numerous fibrils and granules. Tunnels of interchromatin space can occasionally be found as crossing condensed chromatin regions, thus, allowing the access to nuclear pores. Finally, we were able to use TOVIS to directly distinguish most of the nuclear pore complex structures, at the level of a single pore. Concerning the microtubule ultrastructure: We have demonstrated that the polarity of across-sectioned microtubule observed in situ by CEMOVIS wás directly deducible from the visualisation of the tubulin protofiíaments' chirality. This chirality has been established before as related to the shape. of the tubulin subunits. Cryoelectron tomography allowed us to observe microtubules in their cellular context at a resolution sufficient to resolve molecular details such as their tubulin monomers. In this way, uncharacterized molecules were visualised in the microtubule lumen. These observations were made either on samples prepared by CEMOVIS or plunge freezing of whole cells. Finally, we have shown that microtubules are also relevant objects for the understanding of cutting artefacts, when performing CEMOVIS. The goals of our further studies will be to: 1) try to speciifically target different nuclear domains by cytochemical approaches in situ, prior to cryofixation. 2) Apply averaging methods in order to obtain a three-dimensional model of the nuclear pore complex at work, in its cellular context. 3) Use biochemical analysis combined in a second time to immunocytochemical approaches, to determine the exact nature of the microtubule's luminal particles.

Monoclonal antibody against carcinoembryonic antigen (CEA) identifies two new forms of crossreacting antigens of molecular weight 90,000 and 160,000 in normal granulocytes.

Two new forms of non-specific crossreacting antigens (NCAs) were identified in the Nonidet P40 (NP-40) extracts of normal granulocytes by precipitation with the monoclonal antibody (MAb) 192 directed against carcinoembryonic antigen (CEA) and already known to crossreact with the perchloric acid soluble NCA-55. The NP-40 soluble NCAs recognized by MAb 192 have apparent mol. wts of 90,000 and 160,000 in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Both NCAs appear to consist of a single monomeric polypeptide chain, since they have the same electrophoretic mobility in SDS-PAGE under reduced and non-reduced conditions. When granulocytes were extracted with perchloric acid instead of NP-40, only the 55,000 mol. wt antigen, corresponding to the previously described NCA-55, was precipitated by MAb 192. Furthermore, it was shown that NCA-55 is not a degradation product of NCA-90 or NCA-160 due to the perchloric acid treatment because exposure to perchloric acid of NCA preparations purified from NP-40 extracts did not change their apparent mol. wts in SDS-PAGE. It was also shown that NCA-160 is not a granulocytic form of CEA because it was not precipitated by the MAb 35 reacting exclusively with CEA. Immunocytochemical studies of granulocytes and macrophages showed that MAb 192 stained both types of cells whereas MAb 47 stained only the granulocytes and MAb 35 none of these cells. In granulocytes both MAbs reacted with antigens associated with granules and also present at the periphery of the nucleus as well as in the Golgi apparatus. The NCA-90 identified by MAb 192 was found by sequential immunodepletion to be antigenically distinct from the NCA-95 precipitated by MAb 47. The epitope recognized by MAb 192 on CEA and NCA molecules appears to be on the peptidic moiety because the antigens deglycosylated by the enzyme Endo F were still precipitated by this MAb. Taken together, the results indicate that MAb 192 identifies two novel forms of NCA (NCA-90 and NCA-160) in NP-40 extracts of granulocytes, which are distinct from CEA and the previously described NCA-55 and NCA-95 identified by MAbs 192 and 47, respectively, in perchloric acid extracts of granulocytes.

Once-yearly zoledronic acid and days of disability, bed rest, and back pain: randomized, controlled HORIZON Pivotal Fracture Trial.

The objective of this study was to determine the effect of once-yearly zoledronic acid on the number of days of back pain and the number of days of disability (ie, limited activity and bed rest) owing to back pain or fracture in postmenopausal women with osteoporosis. This was a multicenter, randomized, double-blind, placebo-controlled trial in 240 clinical centers in 27 countries. Participants included 7736 postmenopausal women with osteoporosis. Patients were randomized to receive either a single 15-minute intravenous infusion of zoledronic acid (5 mg) or placebo at baseline, 12 months, and 24 months. The main outcome measures were self-reported number of days with back pain and the number of days of limited activity and bed rest owing to back pain or a fracture, and this was assessed every 3 months over a 3-year period. Our results show that although the incidence of back pain was high in both randomized groups, women randomized to zoledronic acid experienced, on average, 18 fewer days of back pain compared with placebo over the course of the trial (p = .0092). The back pain among women randomized to zoledronic acid versus placebo resulted in 11 fewer days of limited activity (p = .0017). In Cox proportional-hazards models, women randomized to zoledronic acid were about 6% less likely to experience 7 or more days of back pain [relative risk (RR) = 0.94, 95% confidence interval (CI) 0.90-0.99] or limited activity owing to back pain (RR = 0.94, 95% CI 0.87-1.00). Women randomized to zoledronic acid were significantly less likely to experience 7 or more bed-rest days owing to a fracture (RR = 0.58, 95% CI 0.47-0.72) and 7 or more limited-activity days owing to a fracture (RR = 0.67, 95% CI 0.58-0.78). Reductions in back pain with zoledronic acid were independent of incident fracture. Our conclusion is that in women with postmenopausal osteoporosis, a once-yearly infusion with zoledronic acid over a 3-year period significantly reduced the number of days that patients reported back pain, limited activity owing to back pain, and limited activity and bed rest owing to a fracture.

Méthodes sismiques actives adaptées à l'étude de milieux hétérogènes : application aux glissements de terrain

Résumé Les glissements de terrain représentent un des principaux risques naturels dans les régions montagneuses. En Suisse, chaque année les glissements de terrains causent des dégâts qui affectent les infrastructures et ont des coûts financiers importants. Une bonne compréhension des mécanismes des glissements peut permettre d'atténuer leur impact. Celle-ci passe notamment par la connaissance de la structure interne du glissement, la détermination de son volume et de son ou ses plans de glissement. Dans un glissement de terrain, la désorganisation et la présence de fractures dans le matériel déplacé engendre un changement des paramètres physiques et en particulier une diminution des vitesses de propagation des ondes sismiques ainsi que de la densité du matériel. Les méthodes sismiques sont de ce fait bien adaptées à l'étude des glissements de terrain. Parmi les méthodes sismiques, l'analyse de la dispersion des ondes de surface est une méthode simple à mettre en oeuvre. Elle présente l'avantage d'estimer les variations des vitesses de cisaillement avec la profondeur sans avoir spécifiquement recours à l'utilisation d'une source d'onde S et de géophones horizontaux. Sa mise en oeuvre en trois étapes implique la mesure de la dispersion des ondes de surface sur des réseaux étendus, la détermination des courbes de dispersion pour finir par l'inversion de ces courbes. Les modèles de vitesse obtenus à partir de cette procédure ne sont valides que lorsque les milieux explorés ne présentent pas de variations latérales. En pratique cette hypothèse est rarement vérifiée, notamment pour un glissement de terrain dans lequel les couches remaniées sont susceptibles de présenter de fortes hétérogénéités latérales. Pour évaluer la possibilité de déterminer des courbes de dispersion à partir de réseaux de faible extension des mesures testes ont été effectuées sur un site (Arnex, VD) équipé d'un forage. Un profil sismique de 190 m de long a été implanté dans une vallée creusée dans du calcaire et remplie par des dépôts glacio-lacustres d'une trentaine de mètres d'épaisseur. Les données acquises le long de ce profil ont confirmé que la présence de variations latérales sous le réseau de géophones affecte l'allure des courbes de dispersion jusqu'à parfois empêcher leur détermination. Pour utiliser l'analyse de la dispersion des ondes de surface sur des sites présentant des variations latérales, notre approche consiste à déterminer les courbes de dispersions pour une série de réseaux de faible extension, à inverser chacune des courbes et à interpoler les différents modèles de vitesse obtenus. Le choix de la position ainsi que de l'extension des différents réseaux de géophones est important. Il tient compte de la localisation des hétérogénéités détectées à partir de l'analyse de sismique réfraction, mais également d'anomalies d'amplitudes observées sur des cartes qui représentent dans le domaine position de tir - position du récepteur, l'amplitude mesurée pour différentes fréquences. La procédure proposée par Lin et Lin (2007) s'est avérée être une méthode efficace permettant de déterminer des courbes de dispersion à partir de réseaux de faible extension. Elle consiste à construire à partir d'un réseau de géophones et de plusieurs positions de tir un enregistrement temps-déports qui tient compte d'une large gamme de distances source-récepteur. Au moment d'assembler les différentes données une correction de phase est appliquée pour tenir compte des hétérogénéités situées entre les différents points de tir. Pour évaluer cette correction nous suggérons de calculer pour deux tir successif la densité spectrale croisée des traces de même offset: Sur le site d'Arnex, 22 courbes de dispersions ont été déterminées pour de réseaux de géophones de 10 m d'extension. Nous avons également profité du forage pour acquérir un profil de sismique verticale en ondes S. Le modèle de vitesse S déduit de l'interprétation du profil de sismique verticale est utilisé comme information à priori lors l'inversion des différentes courbes de dispersion. Finalement, le modèle en deux dimension qui a été établi grâce à l'analyse de la dispersion des ondes de surface met en évidence une structure tabulaire à trois couches dont les limites coïncident bien avec les limites lithologiques observées dans le forage. Dans celui-ci des argiles limoneuses associées à une vitesse de propagation des ondes S de l'ordre de 175 m/s surmontent vers 9 m de profondeur des dépôts de moraine argilo-sableuse caractérisés par des vitesses de propagation des ondes S de l'ordre de 300 m/s jusqu'à 14 m de profondeur et supérieur ou égal à 400 m/s entre 14 et 20 m de profondeur. Le glissement de la Grande Combe (Ballaigues, VD) se produit à l'intérieur du remplissage quaternaire d'une combe creusée dans des calcaires Portlandien. Comme dans le cas du site d'Arnex les dépôts quaternaires correspondent à des dépôts glacio-lacustres. Dans la partie supérieure la surface de glissement a été localisée à une vingtaine de mètres de profondeur au niveau de l'interface qui sépare des dépôts de moraine jurassienne et des dépôts glacio-lacustres. Au pied du glissement 14 courbes de dispersions ont été déterminées sur des réseaux de 10 m d'extension le long d'un profil de 144 m. Les courbes obtenues sont discontinues et définies pour un domaine de fréquence de 7 à 35 Hz. Grâce à l'utilisation de distances source-récepteur entre 8 et 72 m, 2 à 4 modes de propagation ont été identifiés pour chacune des courbes. Lors de l'inversion des courbes de dispersion la prise en compte des différents modes de propagation a permis d'étendre la profondeur d'investigation jusqu'à une vingtaine de mètres de profondeur. Le modèle en deux dimensions permet de distinguer 4 couches (Vs1 < 175 m/s, 175 m/s < Vs2 < 225 m/s, 225 m/s < Vs3 < 400 m/s et Vs4 >.400 m/s) qui présentent des variations d'épaisseur. Des profils de sismiques réflexion en ondes S acquis avec une source construite dans le cadre de ce travail, complètent et corroborent le modèle établi à partir de l'analyse de la dispersion des ondes de surface. Un réflecteur localisé entre 5 et 10 m de profondeur et associé à une vitesse de sommation de 180 m/s souligne notamment la géométrie de l'interface qui sépare la deuxième de la troisième couche du modèle établi à partir de l'analyse de la dispersion des ondes de surface. Abstract Landslides are one of the main natural hazards in mountainous regions. In Switzerland, landslides cause damages every year that impact infrastructures and have important financial costs. In depth understanding of sliding mechanisms may help limiting their impact. In particular, this can be achieved through a better knowledge of the internal structure of the landslide, the determination of its volume and its sliding surface or surfaces In a landslide, the disorganization and the presence of fractures in the displaced material generate a change of the physical parameters and in particular a decrease of the seismic velocities and of the material density. Therefoe, seismic methods are well adapted to the study of landslides. Among seismic methods, surface-wave dispersion analysis is a easy to implement. Through it, shearwave velocity variations with depth can be estimated without having to resort to an S-wave source and to horizontal geophones. Its 3-step implementation implies measurement of surface-wave dispersion with long arrays, determination of the dispersion curves and finally inversion of these curves. Velocity models obtained through this approach are only valid when the investigated medium does not include lateral variations. In practice, this assumption is seldom correct, in particular for landslides in which reshaped layers likely include strong lateral heterogeneities. To assess the possibility of determining dispersion curves from short array lengths we carried out tests measurements on a site (Arnex, VD) that includes a borehole. A 190 m long seismic profile was acquired in a valley carved into limestone and filled with 30 m of glacio-lacustrine sediments. The data acquired along this profile confirmed that the presence of lateral variations under the geophone array influences the dispersion-curve shape so much that it sometimes preventes the dispersion curves determination. Our approach to use the analysis of surface-wave dispersion on sites that include lateral variations consists in obtaining dispersion curves for a series of short length arrays; inverting each so obtained curve and interpolating the different obtained velocity model. The choice of the location as well as the geophone array length is important. It takes into account the location of the heterogeneities that are revealed by the seismic refraction interpretation of the data but also, the location of signal amplitude anomalies observed on maps that represent, for a given frequency, the measured amplitude in the shot position - receiver position domain. The procedure proposed by Lin and Lin (2007) turned out to be an efficient one to determine dispersion curves using short extension arrays. It consists in building a time-offset from an array of geophones with a wide offset range by gathering seismograms acquired with different source-to-receiver offsets. When assembling the different data, a phase correction is applied in order to reduce static phase error induced by lateral variation. To evaluate this correction, we suggest to calculate, for two successive shots, the cross power spectral density of common offset traces. On the Arnex site, 22 curves were determined with 10m in length geophone-arrays. We also took advantage of the borehole to acquire a S-wave vertical seismic profile. The S-wave velocity depth model derived from the vertical seismic profile interpretation is used as prior information in the inversion of the dispersion-curves. Finally a 2D velocity model was established from the analysis of the different dispersion curves. It reveals a 3-layer structure in good agreement with the observed lithologies in the borehole. In it a clay layer with a shear-wave of 175 m/s shear-wave velocity overlies a clayey-sandy till layer at 9 m depth that is characterized down to 14 m by a 300 m/s S-wave velocity; these deposits have a S-wave velocity of 400 m/s between depths of 14 to 20 m. The La Grand Combe landslide (Ballaigues, VD) occurs inside the Quaternary filling of a valley carved into Portlandien limestone. As at the Arnex site, the Quaternary deposits correspond to glaciolacustrine sediments. In the upper part of the landslide, the sliding surface is located at a depth of about 20 m that coincides with the discontinuity between Jurassian till and glacio-lacustrine deposits. At the toe of the landslide, we defined 14 dispersion curves along a 144 m long profile using 10 m long geophone arrays. The obtained curves are discontinuous and defined within a frequency range of 7 to 35 Hz. The use of a wide range of offsets (from 8 to 72 m) enabled us to determine 2 to 4 mode of propagation for each dispersion curve. Taking these higher modes into consideration for dispersion curve inversion allowed us to reach an investigation depth of about 20 m. A four layer 2D model was derived (Vs1< 175 m/s, 175 m/s <Vs2< 225 m/s, 225 m/s < Vs3 < 400 m/s, Vs4> 400 m/s) with variable layer thicknesses. S-wave seismic reflection profiles acquired with a source built as part of this work complete and the velocity model revealed by surface-wave analysis. In particular, reflector at a depth of 5 to 10 m associated with a 180 m/s stacking velocity image the geometry of the discontinuity between the second and third layer of the model derived from the surface-wave dispersion analysis.

A comparison of in vivo 13C MR brain glycogen quantification at 9.4 and 14.1 T.

The high molecular weight and low concentration of brain glycogen render its noninvasive quantification challenging. Therefore, the precision increase of the quantification by localized (13) C MR at 9.4 to 14.1 T was investigated. Signal-to-noise ratio increased by 66%, slightly offset by a T(1) increase of 332 ± 15 to 521 ± 34 ms. Isotopic enrichment after long-term (13) C administration was comparable (≈ 40%) as was the nominal linewidth of glycogen C1 (≈ 50 Hz). Among the factors that contributed to the 66% observed increase in signal-to-noise ratio, the T(1) relaxation time impacted the effective signal-to-noise ratio by only 10% at a repetition time = 1 s. The signal-to-noise ratio increase together with the larger spectral dispersion at 14.1 T resulted in a better defined baseline, which allowed for more accurate fitting. Quantified glycogen concentrations were 5.8 ± 0.9 mM at 9.4 T and 6.0 ± 0.4 mM at 14.1 T; the decreased standard deviation demonstrates the compounded effect of increased magnetization and improved baseline on the precision of glycogen quantification.

New perspectives in the use of ink evidence in forensic science: Part I. Development of a quality assurance process for forensic ink analysis by HPTLC

The level of information provided by ink evidence to the criminal and civil justice system is limited. The limitations arise from the weakness of the interpretative framework currently used, as proposed in the ASTM 1422-05 and 1789-04 on ink analysis. It is proposed to use the likelihood ratio from the Bayes theorem to interpret ink evidence. Unfortunately, when considering the analytical practices, as defined in the ASTM standards on ink analysis, it appears that current ink analytical practices do not allow for the level of reproducibility and accuracy required by a probabilistic framework. Such framework relies on the evaluation of the statistics of the ink characteristics using an ink reference database and the objective measurement of similarities between ink samples. A complete research programme was designed to (a) develop a standard methodology for analysing ink samples in a more reproducible way, (b) comparing automatically and objectively ink samples and (c) evaluate the proposed methodology in a forensic context. This report focuses on the first of the three stages. A calibration process, based on a standard dye ladder, is proposed to improve the reproducibility of ink analysis by HPTLC, when these inks are analysed at different times and/or by different examiners. The impact of this process on the variability between the repetitive analyses of ink samples in various conditions is studied. The results show significant improvements in the reproducibility of ink analysis compared to traditional calibration methods.

Comparability of clinical wear measurements by optical 3D laser scanning in two different centers.

OBJECTIVE: The purpose of this study was to compare the use of different variables to measure the clinical wear of two denture tooth materials in two analysis centers. METHODS: Twelve edentulous patients were provided with full dentures. Two different denture tooth materials (experimental material and control) were placed randomly in accordance with the split-mouth design. For wear measurements, impressions were made after an adjustment phase of 1-2 weeks and after 6, 12, 18, and 24 months. The occlusal wear of the posterior denture teeth of 11 subjects was assessed in two study centers by use of plaster replicas and 3D laser-scanning methods. In both centers sequential scans of the occlusal surfaces were digitized and superimposed. Wear was described by use of four different variables. Statistical analysis was performed after log-transformation of the wear data by use of the Pearson and Lin correlation and by use of a mixed linear model. RESULTS: Mean occlusal vertical wear of the denture teeth after 24 months was between 120μm and 212μm, depending on wear variable and material. For three of the four variables, wear of the experimental material was statistically significantly less than that of the control. Comparison of the two study centers, however, revealed correlation of the wear variables was only moderate whereas strong correlation was observed among the different wear variables evaluated by each center. SIGNIFICANCE: Moderate correlation was observed for clinical wear measurements by optical 3D laser scanning in two different study centers. For the two denture tooth materials, wear measurements limited to the attrition zones led to the same qualitative assessment.

Personality factors and alcohol use: a mediator analysis of drinking motives.

Current evidence on the association between personality factors, drinking motives, and alcohol use comes exclusively from North America. The present study, however, is based on a sample of 2090 Swiss college students (mean age 23.5, SD = 2,9) and investigates by means of structural equation modeling whether drinking motives mediate the association between personality factors and alcohol use. The results revealed that extraversion was positively related to drinking for enhancement motives; conscientiousness was negatively related to both enhancement and coping motives; and neuroticism was positively related to drinking for coping motives. The association between extraversion and alcohol use was mediated by enhancement motives, while the negative association between conscientiousness and alcohol use was partially mediated by both enhancement and coping motives. This concurs with the findings of North American studies. However, in contrast to these findings, our study finds that coping motives attenuate the "protective" effect of neuroticism with regard to alcohol use. Taken together, the study indicates that alcohol use serves specific purposes depending on particular personality traits. The finding that personality-related effects are partially mediated by motives increases the likelihood that motive-based preventive efforts will help reduce alcohol use among young adults who display particular personality traits.

Peer pressure and alcohol use in young men: a mediation analysis of drinking motives.

BACKGROUND: Peer pressure (PP) has been shown to play a major role in the development and continuation of alcohol use and misuse. To date, almost all the studies investigating the association of PP with alcohol use only considered the PP for misconduct but largely ignored other aspects of PP, such as pressure for peer involvement and peer conformity. Moreover, it is not clear whether the association of PP with alcohol use is direct or mediated by other factors. The aim of the present study was to investigate the association of different aspects of peer pressure (PP) with drinking volume (DV) and risky single-occasion drinking (RSOD), and to explore whether these associations were mediated by drinking motives (DM). METHODS: A representative sample of 5521 young Swiss men, aged around 20 years old, completed a questionnaire assessing their usual weekly DV, the frequency of RSOD, DM (i.e. enhancement, social, coping, and conformity motives), and 3 aspects of PP (i.e. misconduct, peer involvement, and peer conformity). Associations between PP and alcohol outcomes (DV and RSOD) as well as the mediation of DM were tested using structural equation models. RESULTS: Peer pressure to misconduct was associated with more alcohol use, whereas peer involvement and peer conformity were associated with less alcohol use. Associations of drinking outcomes with PP to misconduct and peer involvement were partially mediated by enhancement and coping motives, while the association with peer conformity was partially mediated by enhancement and conformity motives. CONCLUSIONS: Results suggest that PP to misconduct constitutes a risk factor, while peer conformity and peer involvement reflect protective factors with regard to alcohol use. Moreover, results from the mediation analyses suggest that part of the association of PP with alcohol use came indirectly through DM: PP was associated with DM, which in turn were associated with alcohol use.

Comparison of polyethylene wear in anatomical and reversed shoulder prostheses.

Wear of polyethylene is associated with aseptic loosening of orthopaedic implants and has been observed in hip and knee prostheses and anatomical implants for the shoulder. The reversed shoulder prostheses have not been assessed as yet. We investigated the volumetric polyethylene wear of the reversed and anatomical Aequalis shoulder prostheses using a mathematical musculoskeletal model. Movement and joint stability were achieved by EMG-controlled activation of the muscles. A non-constant wear factor was considered. Simulated activities of daily living were estimated from in vivo recorded data. After one year of use, the volumetric wear was 8.4 mm(3) for the anatomical prosthesis, but 44.6 mm(3) for the reversed version. For the anatomical prosthesis the predictions for contact pressure and wear were consistent with biomechanical and clinical data. The abrasive wear of the polyethylene in reversed prostheses should not be underestimated, and further analysis, both experimental and clinical, is required.