Intrinsic ROS-production capacity of nanoparticles

Engineered nanomaterials (ENMs) exhibit special physicochemical properties and thus are finding their way into an increasing number of industries, enabling products with improved properties. Their increased use brings a greater likelihood of exposure to the nanoparticles (NPs) that could be released during the life cycle of nano-abled products. The field of nanotoxicology has emerged as a consequence of the development of these novel materials, and it has gained ever more attention due to the urgent need to gather information on exposure to them and to understand the potential hazards they engender. However, current studies on nanotoxicity tend to focus on pristine ENMs, and they use these toxicity results to generalize risk assessments on human exposure to NPs. ENMs released into the environment can interact with their surroundings, change characteristics and exhibit toxicity effects distinct from those of pristine ENMs. Furthermore, NPs' large surface areas provide extra-large potential interfaces, thus promoting more significant interactions between NPs and other co-existing species. In such processes, other species can attach to a NP's surface and modify its surface functionality, in addition to the toxicity in normally exhibits. One particular occupational health scenario involves NPs and low-volatile organic compounds (LVOC), a common type of pollutant existing around many potential sources of NPs. LVOC can coat a NP's surface and then dominate its toxicity. One important mechanism in nanotoxicology is the creation of reactive oxygen species (ROS) on a NP's surface; LVOC can modify the production of these ROS. In summary, nanotoxicity research should not be limited to the toxicity of pristine NPs, nor use their toxicity to evaluate the health effects of exposure to environmental NPs. Instead, the interactions which NPs have with other environmental species should also be considered and researched. The potential health effects of exposure to NPs should be derived from these real world NPs with characteristics modified by the environment and their distinct toxicity. Failure to suitably address toxicity results could lead to an inappropriate treatment of nano- release, affect the environment and public health and put a blemish on the development of sustainable nanotechnologies as a whole. The main objective of this thesis is to demonstrate a process for coating NP surfaces with LVOC using a well-controlled laboratory design and, with regard to these NPs' capacity to generate ROS, explore the consequences of changing particle toxicity. The dynamic coating system developed yielded stable and replicable coating performance, simulating an important realistic scenario. Clear changes in the size distribution of airborne NPs were observed using a scanning mobility particle sizer, were confirmed using both liquid nanotracking analyses and transmission electron microscopy (TEM) imaging, and were verified thanks to the LVOC coating. Coating thicknesses corresponded to the amount of coating material used and were controlled using the parameters of the LVOC generator. The capacity of pristine silver NPs (Ag NPs) to generate ROS was reduced when they were given a passive coating of inert paraffin: this coating blocked the reactive zones on the particle surfaces. In contrast, a coating of active reduced-anthraquinone contributed to redox reactions and generated ROS itself, despite the fact that ROS generation due to oxidation by Ag NPs themselves was quenched. Further objectives of this thesis included development of ROS methodology and the analysis of ROS case studies. Since the capacity of NPs to create ROS is an important effect in nanotoxicity, we attempted to refine and standardize the use of 2'7-dichlorodihydrofluorescin (DCFH) as a chemical tailored for the characterization of NPs' capacity for ROS generation. Previous studies had reported a wide variety of results, which were due to a number of insufficiently well controlled factors. We therefore cross-compared chemicals and concentrations, explored ways of dispersing NP samples in liquid solutions, identified sources of contradictions in the literature and investigated ways of reducing artificial results. The most robust results were obtained by sonicating an optimal sample of NPs in a DCFH-HRP solution made of 5,M DCFH and 0.5 unit/ml horseradish peroxidase (HRP). Our findings explained how the major reasons for previously conflicting results were the different experimental approaches used and the potential artifacts appearing when using high sample concentrations. Applying our advanced DCFH protocol with other physicochemical characterizations and biological analyses, we conducted several case studies, characterizing aerosols and NP samples. Exposure to aged brake wear dust engenders a risk of potential deleterious health effects in occupational scenarios. We performed microscopy and elemental analyses, as well as ROS measurements, with acellular and cellular DCFH assays. TEM images revealed samples to be heterogeneous mixtures with few particles in the nano-scale. Metallic and non-metallic elements were identified, primarily iron, carbon and oxygen. Moderate amounts of ROS were detected in the cell-free fluorescent tests; however, exposed cells were not dramatically activated. In addition to their highly aged state due to oxidation, the reason aged brake wear samples caused less oxidative stress than fresh brake wear samples may be because of their larger size and thus smaller relative reactive surface area. Other case studies involving welding fumes and differently charged NPs confirmed the performance of our DCFH assay and found ROS generation linked to varying characteristics, especially the surface functionality of the samples. Les nanomatériaux manufacturés (ENM) présentent des propriétés physico-chimiques particulières et ont donc trouvés des applications dans un nombre croissant de secteurs, permettant de réaliser des produits ayant des propriétés améliorées. Leur utilisation accrue engendre un plus grand risque pour les êtres humains d'être exposés à des nanoparticules (NP) qui sont libérées au long de leur cycle de vie. En conséquence, la nanotoxicologie a émergé et gagné de plus en plus d'attention dû à la nécessité de recueillir les renseignements nécessaires sur l'exposition et les risques associés à ces nouveaux matériaux. Cependant, les études actuelles sur la nanotoxicité ont tendance à se concentrer sur les ENM et utiliser ces résultats toxicologiques pour généraliser l'évaluation des risques sur l'exposition humaine aux NP. Les ENM libérés dans l'environnement peuvent interagir avec l'environnement, changeant leurs caractéristiques, et montrer des effets de toxicité distincts par rapport aux ENM originaux. Par ailleurs, la grande surface des NP fournit une grande interface avec l'extérieur, favorisant les interactions entre les NP et les autres espèces présentes. Dans ce processus, d'autres espèces peuvent s'attacher à la surface des NP et modifier leur fonctionnalité de surface ainsi que leur toxicité. Un scénario d'exposition professionnel particulier implique à la fois des NP et des composés organiques peu volatils (LVOC), un type commun de polluant associé à de nombreuses sources de NP. Les LVOC peuvent se déposer sur la surface des NP et donc dominer la toxicité globale de la particule. Un mécanisme important en nanotoxicologie est la création d'espèces réactives d'oxygène (ROS) sur la surface des particules, et les LVOC peuvent modifier cette production de ROS. En résumé, la recherche en nanotoxicité ne devrait pas être limitée à la toxicité des ENM originaux, ni utiliser leur toxicité pour évaluer les effets sur la santé de l'exposition aux NP de l'environnement; mais les interactions que les NP ont avec d'autres espèces environnementales doivent être envisagées et étudiées. Les effets possibles sur la santé de l'exposition aux NP devraient être dérivés de ces NP aux caractéristiques modifiées et à la toxicité distincte. L'utilisation de résultats de toxicité inappropriés peut conduire à une mauvaise prise en charge de l'exposition aux NP, de détériorer l'environnement et la santé publique et d'entraver le développement durable des industries de la nanotechnologie dans leur ensemble. L'objectif principal de cette thèse est de démontrer le processus de déposition des LVOC sur la surface des NP en utilisant un environnement de laboratoire bien contrôlé et d'explorer les conséquences du changement de toxicité des particules sur leur capacité à générer des ROS. Le système de déposition dynamique développé a abouti à des performances de revêtement stables et reproductibles, en simulant des scénarios réalistes importants. Des changements clairs dans la distribution de taille des NP en suspension ont été observés par spectrométrie de mobilité électrique des particules, confirmé à la fois par la méthode dite liquid nanotracking analysis et par microscopie électronique à transmission (MET), et a été vérifié comme provenant du revêtement par LVOC. La correspondance entre l'épaisseur de revêtement et la quantité de matériau de revêtement disponible a été démontré et a pu être contrôlé par les paramètres du générateur de LVOC. La génération de ROS dû aux NP d'argent (Ag NP) a été diminuée par un revêtement passif de paraffine inerte bloquant les zones réactives à la surface des particules. Au contraire, le revêtement actif d'anthraquinone réduit a contribué aux réactions redox et a généré des ROS, même lorsque la production de ROS par oxydation des Ag NP avec l'oxygène a été désactivé. Les objectifs associés comprennent le développement de la méthodologie et des études de cas spécifique aux ROS. Etant donné que la capacité des NP à générer des ROS contribue grandement à la nanotoxicité, nous avons tenté de définir un standard pour l'utilisation de 27- dichlorodihydrofluorescine (DCFH) adapté pour caractériser la génération de ROS par les NP. Des etudes antérieures ont rapporté une grande variété de résultats différents, ce qui était dû à un contrôle insuffisant des plusieurs facteurs. Nous avons donc comparé les produits chimiques et les concentrations utilisés, exploré les moyens de dispersion des échantillons HP en solution liquide, investigué les sources de conflits identifiées dans les littératures et étudié les moyens de réduire les résultats artificiels. De très bon résultats ont été obtenus par sonication d'une quantité optimale d'échantillons de NP en solution dans du DCFH-HRP, fait de 5 nM de DCFH et de 0,5 unité/ml de Peroxydase de raifort (HRP). Notre étude a démontré que les principales raisons causant les conflits entre les études précédemment conduites dans la littérature étaient dues aux différentes approches expérimentales et à des artefacts potentiels dus à des concentrations élevées de NP dans les échantillons. Utilisant notre protocole DCFH avancé avec d'autres caractérisations physico-chimiques et analyses biologiques, nous avons mené plusieurs études de cas, caractérisant les échantillons d'aérosols et les NP. La vielle poussière de frein en particulier présente un risque élevé d'exposition dans les scénarios professionnels, avec des effets potentiels néfastes sur la santé. Nous avons effectué des analyses d'éléments et de microscopie ainsi que la mesure de ROS avec DCFH cellulaire et acellulaire. Les résultats de MET ont révélé que les échantillons se présentent sous la forme de mélanges de particules hétérogènes, desquels une faible proportion se trouve dans l'échelle nano. Des éléments métalliques et non métalliques ont été identifiés, principalement du fer, du carbone et de l'oxygène. Une quantité modérée de ROS a été détectée dans le test fluorescent acellulaire; cependant les cellules exposées n'ont pas été très fortement activées. La raison pour laquelle les échantillons de vielle poussière de frein causent un stress oxydatif inférieur par rapport à la poussière de frein nouvelle peut-être à cause de leur plus grande taille engendrant une surface réactive proportionnellement plus petite, ainsi que leur état d'oxydation avancé diminuant la réactivité. D'autres études de cas sur les fumées de soudage et sur des NP différemment chargées ont confirmé la performance de notre test DCFH et ont trouvé que la génération de ROS est liée à certaines caractéristiques, notamment la fonctionnalité de surface des échantillons.

Satellizing Galileo? Non-state Authority and Interoperability Standards in the European Global Navigation Satellite System

This paper explores the extent and limits of non-state authority in international affairs. While a number of studies have emphasised the role of state support and the ability of strategically situated actors to capture regulatory processes, they often fail to unpack the conditions under which this takes place. In order to probe the assumption that structural market power, backed by political support, equates regulatory capture, the article examines the interplay of political and economic considerations in the negotiations to establish worldwide interoperability standards needed for the development of Galileo as a genuinely European global navigation satellite system under civil control. It argues that industries supported and identified as strategic by public actors are more likely to capture standardisation processes than those with the largest market share expected to be created by the standards. This suggests that the influence of industries in space, air and maritime traffic control closely related to the militaro-industrial complex remains disproportionate in comparison to the prospective market of location-based services expected to vastly transform business practices, labour relations and many aspects of our daily life.

Characterization of the effects of IL-17F on CHO cell line generation

CHO is the most commonly used mammalian host for the generation of cell lines allowing for the production of high quality therapeutic proteins. The generation of such cell lines is a lengthy and resource-intensive process requiring extensive screening in order to isolate candidates with optimal characteristics, such as growth, stability and productivity. For this reason, the biotechnology industry invests much effort in attempts to optimize CHO expression systems in order to streamline and shorten the cell line selection process. Based on preliminary observations of a facilitated selection of CHO-GS cell lines expressing members of the IL-17 cytokine family, this study investigates the use of IL-17F as a novel enhancing factor for CHO cell line generation. Using two different CHO expression systems (exploiting GS and DHFR-based selection), we demonstrated that IL-17F expression caused a significant increase in the occurrence of colonies during the selection process. All colonies selected produced substantial amounts of IL-17F, suggesting that benefits were conferred, during selection, to those cells expressing the cytokine. Furthermore, transgene expression levels were significantly increased when the selection pressure was raised to a level that would not normally be permissive for colony selection (i.e. 100 |o.M MSX for the CHO-GS expression system or 1000 nM MTX for the CHO-DHFR system). Finally, IL-17F expression was also found to enhance the rate of appearance of clones during single cell subcloning in the absence of selection pressure. Overall, these benefits have the potential to allow a substantial reduction in the length of cell line generation while significantly increasing cell line productivity. Nevertheless, we found that the high IL-17F expression levels required to convey enhancing effects was a limitation when attempting to co-express IL-17F and a recombinant soluble protein of therapeutic interest from independent CMV promoters within the same expression vector. In order to understand and overcome this limitation, studies were designed to characterize the IL-17F enhancing effect at the molecular and cellular level. Regular supplementation of recombinant biologically-active IL-17F into the culture medium during cell line selection was not able to reproduce the enhancing effects of endogenous IL-17F expression. In addition, increased IL-17F expression correlated with increased CHO-GS selection transgene expression at the single cell level. This data suggested a possible effect of IL-17F on viral promoter activity or transgene mRNA stability. It also provided direct evidence that the cells expressing the highest amounts of IL-17F obtained the most benefit. Overall data obtained from these study implied that IL-17F may act through an intracellular mechanism, possibly exerted during secretion. We therefore initiated experiments designed to determine the specific compartment(s) within which IL-17F triggers its effect. This work has identified IL-17F as a potentially powerful tool to optimize the CHO cell line generation process. The characterization of this enhancing effect at the molecular level has given us several insights into overcoming the current limitations, thus paving the way for the development of a viable technology that can be exploited within the biotechnology industry. - La CHO est la cellule hôte de mammifere la plus couramment utilisée dans la création de lignée cellulaire produisant des protéines thérapeutiques de haute qualité. La génération de ces lignées cellulaires est un processus long et exigeant l'utilisation de techniques de sélection robustes afin d'isoler des candidats possédants les caractéristiques optimales de croissance, de productivité et de stabilité d'expression. Les industries biopharmaceutiques ont investi beaucoup d'efforts afin d'optimiser les systèmes d'expression CHO dans le but raccourcir la longueur du procédé de sélection de lignées cellulaires et aussi d'en augmenter l'efficacité. A partir d'observations préliminaires obtenues lors de la génération de lignées cellulaires CHO- GS exprimant une cytokine appartenant à la famille des IL-17, nous avons réalisé une étude portant sur l'utilisation de l'IL-17F humaine (IL-17F) comme nouveau facteur d'optimisation pour la génération de lignées cellulaires CHO. Nous avons démontré, en utilisant les deux systèmes de sélection et d'expression CHO couramment utilisés (le premier exploitant la GS et l'autre basée sur la DHFR), que l'expression de l'IL-17F permet une augmentation significative de la fréquence d'apparition de colonies durant le processus de sélection de lignées cellulaires. Les différentes colonies sélectionnées expriment des quantités substantielles d'IL-17F, suggérant un effet bénéfique lors de la sélection qui serait exclusivement conféré aux cellules exprimant la cytokine. En outre, le niveau d'expression du transgene se trouve significativement augmenté lorsque la pression de sélection est portée à un niveau habituellement trop élevé pour permettre la sélection de colonies (soit 100 |JM MSX pour le système d'expression CHO-GS ou 1000 nM MTX pour le système CHO- DHFR). Enfin, l'expression d'IL-17F permet également d'améliorer la vitesse d'apparition de clones pendant une étape de sous-clonage en l'absence de pression de sélection. L'ensemble de ces effets bénéfiques permettent une réduction substantielle de la durée de génération de lignées cellulaires tout en augmentant considérablement la productivité des lignées obtenues. Néanmoins, nous avons constaté que la nécessité d'exprimer des niveaux élevés d'IL-17F afin obtenir l'ensemble de ses effets bénéfiques devient une contrainte lors de l'utilisation d'un vecteur d'expression composé de deux promoteurs CMV indépendants pour la co-expression de la cytokine et d'une protéine soluble présentant un intérêt thérapeutique. Afin de mieux comprendre et de surmonter cette limitation, plusieurs études ont été effectuées dans le but de mieux caractériser l'effet de IL-17F au niveau subcellulaire. L'apport régulier en IL-17F recombinante et biologiquement active dans le milieu de culture lors de la sélection de lignées cellulaires ne permet pas de reproduire les effets bénéfiques observés par l'expression endogène d'IL-17F. En outre, nous avons constaté que, lors de l'utilisation du système CHO- GS, l'augmentation d'expression de 1TL-17F est corrélée à un accroissement de l'expression du marqueur de sélection au niveau cellulaire. Ces résultats suggèrent un possible effet d'IL- 17F sur l'activité des promoteurs viraux et ainsi fournissent une preuve directe que les cellules exprimant de haut niveau d'IL-17F sont celles qui en profitent le plus. L'ensemble de ces observations mettrait en avant que l'effet d'IL-17F se ferait selon un mécanisme intracellulaire. Nous avons donc étudié le(s) compartiment(s) spécifique(s) dans lequel IL-17F pourrait exercer son effet. Ce travail a permis de définir IL-17F comme un puissant outil pour l'optimisation des procédés de génération de lignées cellulaires CHO. La caractérisation de cette amélioration de l'effet au niveau moléculaire nous a donné plusieurs indications sur la manière de dépasser les limitations actuelles, ouvrant ainsi la voie au développement d'une technologie viable qui peut être exploitée pars l'industrie biotechnologique.

The policy-making structure of European regulatory networks and the domestic adoption of standards

European regulatory networks (ERNs) constitute the main governance instrument for the informal co-ordination of public regulation at the European Union (EU) level. They are in charge of co-ordinating national regulators and ensuring the implementation of harmonized regulatory policies across the EU, while also offering sector-specific expertise to the Commission. To this aim, ERNs develop 'best practices' and benchmarking procedures in the form of standards, norms and guidelines to be adopted in member states. In this paper, we focus on the Committee of European Securities Regulators and examine the consequences of the policy-making structure of ERNs on the domestic adoption of standards. We find that the regulators of countries with larger financial industries tend to occupy more central positions in the network, especially among newer member states. In turn, network centrality is associated with a more prompt domestic adoption of standards.

NanoImpactNet - building a multi-stakeholder dialogue on the health and environmental impact of nanomaterials

NanoImpactNet (NIN) is a multidisciplinary European Commission funded network on the environmental, health and safety (EHS) impact of nanomaterials. The 24 founding scientific institutes are leading European research groups active in the fields of nanosafety, nanorisk assessment and nanotoxicology. This 4-year project is the new focal point for information exchange within the research community. Contact with other stakeholders is vital and their needs are being surveyed. NIN is communicating with 100s of stakeholders: businesses; internet platforms; industry associations; regulators; policy makers; national ministries; international agencies; standard-setting bodies and NGOs concerned by labour rights, EHS or animal welfare. To improve this communication, internet research, a questionnaire distributed via partners and targeted phone calls were used to identify stakeholders' interests and needs. Knowledge gaps and the necessity for further data mentioned by representatives of all stakeholder groups in the targeted phone calls concerned: • the potential toxic and safety hazards of nanomaterials throughout their lifecycles; • the fate and persistence of nanoparticles in humans, animals and the environment; • the associated risks of nanoparticle exposure; • greater participation in: the preparation of nomenclature, standards, methodologies, protocols and benchmarks; • the development of best practice guidelines; • voluntary schemes on responsibility; • databases of materials, research topics and themes, but also of expertise. These findings suggested that stakeholders and NIN researchers share very similar knowledge needs, and that open communication and free movement of knowledge will benefit both researchers and industry. Subsequently a workshop was organised by NIN focused on building a sustainable multi-stakeholder dialogue. Specific questions were asked to different stakeholder groups to encourage discussions and open communication. 1. What information do stakeholders need from researchers and why? The discussions about this question confirmed the needs identified in the targeted phone calls. 2. How to communicate information? While it was agreed that reporting should be enhanced, commercial confidentiality and economic competition were identified as major obstacles. It was recognised that expertise was needed in the areas of commercial law and economics for a wellinformed treatment of this communication issue. 3. Can engineered nanomaterials be used safely? The idea that nanomaterials are probably safe because some of them have been produced 'for a long time', was questioned, since many materials in common use have been proved to be unsafe. The question of safety is also about whether the public has confidence. New legislation like REACH could help with this issue. Hazards do not materialise if exposure can be avoided or at least significantly reduced. Thus, there is a need for information on what can be regarded as acceptable levels of exposure. Finally, it was noted that there is no such thing as a perfectly safe material but only boundaries. At this moment we do not know where these boundaries lie. The matter of labelling of products containing nanomaterials was raised, as in the public mind safety and labelling are connected. This may need to be addressed since the issue of nanomaterials in food, drink and food packaging may be the first safety issue to attract public and media attention, and this may have an impact on 'nanotechnology as a whole. 4. Do we need more or other regulation? Any decision making process should accommodate the changing level of uncertainty. To address the uncertainties, adaptations of frameworks such as REACH may be indicated for nanomaterials. Regulation is often needed even if voluntary measures are welcome because it mitigates the effects of competition between industries. Data cannot be collected on voluntary bases for example. NIN will continue with an active stakeholder dialogue to further build on interdisciplinary relationships towards a healthy future with nanotechnology.

Health effects of occupational exposure in a dairy food industry, with a specific assessment of exposure to airborne lactic acid bacteria

OBJECTIVE:: Lactic acid bacteria (LAB) are used in food industries as probiotic agents. The aim of this study is to assess the potential health effects of airborne exposure to a mix of preblend (LAB and carbohydrate) and milk powder in workers. METHODS:: A medical questionnaire, lung function tests, and immunologic tests were carried out on 50 workers. Occupational exposure to inhalable dust and airborne LAB was measured. RESULTS:: Workers not using respiratory masks reported more symptoms of irritation than workers using protection. Workers from areas with higher levels of airborne LAB reported the most health symptoms and the immune responses of workers to LAB was higher than the immune responses of a control population. CONCLUSIONS:: Measures to reduce exposure to airborne LAB and milk powder in food industries are recommended.

Management of nanomaterials safety in research environment

Despite numerous discussions, workshops, reviews and reports about responsible development of nanotechnology, information describing health and environmental risk of engineered nanoparticles or nanomaterials is severely lacking and thus insufficient for completing rigorous risk assessment on their use. However, since preliminary scientific evaluations indicate that there are reasonable suspicions that activities involving nanomaterials might have damaging effects on human health; the precautionary principle must be applied. Public and private institutions as well as industries have the duty to adopt preventive and protective measures proportionate to the risk intensity and the desired level of protection. In this work, we present a practical, 'user-friendly' procedure for a university-wide safety and health management of nanomaterials, developed as a multi-stakeholder effort (government, accident insurance, researchers and experts for occupational safety and health). The process starts using a schematic decision tree that allows classifying the nano laboratory into three hazard classes similar to a control banding approach (from Nano 3 - highest hazard to Nano1 - lowest hazard). Classifying laboratories into risk classes would require considering actual or potential exposure to the nanomaterial as well as statistical data on health effects of exposure. Due to the fact that these data (as well as exposure limits for each individual material) are not available, risk classes could not be determined. For each hazard level we then provide a list of required risk mitigation measures (technical, organizational and personal). The target 'users' of this safety and health methodology are researchers and safety officers. They can rapidly access the precautionary hazard class of their activities and the corresponding adequate safety and health measures. We succeed in convincing scientist dealing with nano-activities that adequate safety measures and management are promoting innovation and discoveries by ensuring them a safe environment even in the case of very novel products. The proposed measures are not considered as constraints but as a support to their research. This methodology is being implemented at the Ecole Polytechnique de Lausanne in over 100 research labs dealing with nanomaterials. It is our opinion that it would be useful to other research and academia institutions as well. [Authors]

Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.

Metal concentrations in soils around the copper smelter and surrounding industrial complex of Port Kembla, NSW, Australia

Anthropogenic emissions of metals from sources such as smelters are an international problem, but there is limited published information on emissions from Australian smelters. The objective of this study was to investigate the regional distribution of heavy metals in soils in the vicinity of the industrial complex of Port Kembla, NSW, Australia, which comprises a copper smelter, steelworks and associated industries. Soil samples (n=25) were collected at the depths of 0-5 and 5-20 cm, air dried and sieved to < 2 mm. Aqua regia extractable amounts of As, Cr, Cu, Ph and Zn were analysed by inductively coupled plasma mass spectrometry (lCP-MS) and inductively coupled plasma atomic emission spectrometry (ICP-AES). Outliers were identified from background levels by statistical methods. Mean background levels at a depth of 0-5 cm were estimated at 3.2 mg/kg As, 12 mg/kg Cr, 49 mg/kg Cu, 20 mg/kg Ph and 42 mg/kg Zn. Outliers for elevated As and Cu values were mainly present within 4 km from the Port Kembla industrial complex, but high Ph at two sites and high Zn concentrations were found at six sites up to 23 km from Port Kembla. Chromium concentrations were not anomalous close to the industrial complex. There was no significant difference of metal concentrations at depths of 0-5 and 5-20 cm, except for Ph and Zn. Copper and As concentrations in the soils are probably related to the concentrations in the parent rock. From this investigation, the extent of the contamination emanating from the Port Kembla industrial complex is limited to 1-13 km, but most likely <4 km, depending on the element; the contamination at the greater distance may not originate from the industrial complex. (C) 2003 Elsevier B.V. All rights reserved.

La mortalité par tumeur maligne chez les ouvriers d'une fabrique de caoutchouc en Suisse: étude épidémiologique, 1955-1975. [Cancer mortality among the workers of a Swiss rubber goods factory. Epidemiological study, 1955-75].

In an epidemiologic investigation of mortality among workers in a Swiss rubber-goods factory the cancer mortality in the period 1955-1975 has been studied in all male workers active on 1 January 1955 in (a) a rubber-goods factory and (b) a munitions factory, the latter as reference population. The two groups numbered some 1000 each. Both factories were located in the same Central Swiss village where no other industry was present. Mortality in each industry is compared with that in the Swiss population in general (SMR) and the mortalities of the two industries are compared with each other. The results tend to confirm that rubber workers are exposed to a higher risk of cancer mortality. Three particular types of cancer are briefly discussed: cancer of the stomach, of the lower urinary tract, and glioblastoma.

Long-term and long range migration of radioisotopes in terrestrial systems : mechanisms of radioisotopes (Cs, Sr, Pu, Am) mobilization in soils

Summary Artificial radionuclides were released in the environment during the atmospheric nuclear weapon tests and after accidental events involving nuclear industries. As a primary receptor of the deposition, the soil is a very sensitive compartment and understanding the interaction and migration of radionuclides within soils allows the development of scenario for the contamination risk of the population and of the environment. Most available field studies on radionuclides in soils only concern one or two isotopes, mostly 137Cs, and few physico-chemical soil parameters. The purpose of this study was a broader understanding of the radioecology of an Alpine valley. In a first part, we aimed to describe the depth distribution of 137Cs, 90Sr, 239+240Pu, and 241Am within different alpine soils and to identify some stable elements as indicators for accumulating layers. In the central part of the study, the goal was to investigate the repartition of ^Sr and 239Pu between the truly dissolved fraction and the colloidal fraction of the soil solutions and to identify the nature of colloids involved in the adsorption of ^Sr and 239Pu. These results were integrated in an "advection- sorption" transport model seeking to explain the migration of 239Pu and 90Sr within the soils and to assess the importance of colloidal transport for these two isotopes. A further aspect studied was the role of the competition between the radioisotopes (137Cs and 90Sr) and their stable chemical analogues (K and Ca) with respect to plant uptake by different plant species. The results on the depth distribution within the soils showed that 137Cs was mostly retained in the topsoil, to the exception of an organic-rich soil (Histosol 2) receiving important surface runoff, where migration down to a depth of 30 cm was observed. 137Cs depth distribution within the soils was similar to unsupported 210Pb depth distribution. The plant uptake of 137Cs clearly depended on the concentration of exchangeable potassium in the soils. Moreover, we showed that the 137Cs uptake by certain species of the taxonomic orders Poales and Rosales was more sensitive to the increase in exchangeable Κ compared to other orders. Strontium-90 was much more mobile in the soils than 137Cs and depth migration and accumulation in specific AI- and Fe-rich layers were found down to 30 cm. Copper and Ni showed accumulations in these same layers, indicating their potential to be used as indicators for the migration of ^Sr within the soils. In addition, we observed a 90Sr activity peak in the topsoil that can be attributable to recycling of 90Sr by plant uptake. We demonstrated for the first time that a part of 90Sr (at least 40%) was associated with the colloids in organic-rich soil solutions. Therefore, we predict a significant effect of the colloidal migration of ^Sr in organic-rich soil solutions. The plant uptake results for 90Sr indicated a phylogenetic effect between Non-Eudicot and Eudicots: the order Poales concentrating much less 90Sr than Eudicots do. Moreover, we were able to demonstrate that the sensitivity of the 90Sr uptake by 5 different Alpine plant species to the amount of exchangeable Ca was species-independent. Plutonium and 241Am accumulated in the second layer of all soils and only a slight migration deeper than 20 cm was observed. Plutonium and 241Am showed a similar depth distribution in the soils. The model results suggested that the present day migration of 239Pu was very slow and that the uptake by plants was negligible. 239Pu activities between 0.01 to 0.08 mBq/L were measured in the bulk soil solutions. Migration of 239Pu with the soil solution is dominated by colloidal transport. We reported strong evidences that humic substances were responsible of the sorption of 239Pu to the colloidal fraction of the soil solutions. This was reflected by the strong correlation between 239Pu concentrations and the content of (colloidal) organic matter in the soil solution. Résumé Certains radioéléments artificiels ont été disséminés dans l'environnement suite aux essais atmosphériques de bombes nucléaires et suite à des accidents impliquant les industries nucléaires. En tant que récepteur primaire de la déposition, le sol est un compartiment sensible et des connaissances sur les interactions et la migration des radioéléments dans le sol permettent de développer des modèles pour estimer la contamination de la population et de l'environnement. Actuellement, la plupart des études de terrain sur ce sujet concernent uniquement un ou deux radioéléments, surtout le 137Cs et peu d'études intègrent les paramètres du sol pour expliquer la migration des radioéléments. Le but général de cette étude était une compréhension étendue de la radio-écologie d'une vallée alpine. Notre premier objectif était de décrire la distribution en profondeur de 137Cs, ^Sr, 239+240pu et 241Am dans différents sols alpins en relation avec des éléments stables du sol, dans le but d'identifier des éléments stables qui pourraient servir d'indicateurs pour des horizons accumulateurs. L'objectif de la deuxième partie, qui était la partie centrale de l'étude, était d'estimer le pourcentage d'activité sous forme colloïdale du 239Pu et du 90Sr dans les solutions des sols. De plus nous avons déterminé la nature des colloïdes impliqués dans la fixation du ^Sr et 239Pu. Nous avons ensuite intégré ces résultats dans un modèle de transport développé dans le but de décrire la migration du 239Pu et 90Sr dans le sol. Finalement, nous avons étudié l'absorption de 137Cs et 90Sr par les plantes en fonction de l'espèce et de la compétition avec leur élément analogue stable (K et Ca). Les résultats sur la migration en profondeur du 137Cs ont montré que ce radioélément était généralement retenu en surface, à l'exception d'un sol riche en matière organique dans lequel nous avons observé une nette migration en profondeur. Dans tous les sols, la distribution en profondeur du 137Cs était corrélée avec la distribution du 210Pb. L'absorption du 137Cs par les plantes, était dépendante de la concentration en Κ échangeable dans le sol, le potassium étant un compétiteur. De plus, nous avons observé que les espèces ne réagissaient pas de la même manière aux variations de la concentration de Κ échangeable. En effet, les espèces appartenant aux ordres des Poales et des Rosales étaient plus sensibles aux variations de potassium échangeable dans le sol. Dans tous les sols Le 90Sr était beaucoup plus mobile que le 137Cs. En effet, nous avons observé des accumulations de 90Sr dans des horizons riches en Fe et Al jusqu'à 30 cm de profondeur. De plus, le Cu et le Ni montraient des accumulations dans les mêmes horizons que le 90Sr, indiquant qu'il pourrait être possible d'utiliser ces deux éléments comme analogues pour la migration du 90Sr. D'après le modèle développé, le pic de 90Sr dans les premiers centimètres du sol peut être attribué à du recyclage par les plantes. Le 90Sr en solution était principalement sous forme dissoute dans des solutions de sols peu organique (entre 60 et 100% de 90Sr dissous). Par contre, dans des solutions organiques, un important pourcentage de 90Sr (plus de 40%) était associé aux colloïdes. La migration colloïdale du 90Sr peut donc être significative dans des solutions organiques. Comme pour le 137Cs, l'absorption du 90Sr par les plantes dépendait de la concentration de son analogue chimique dans la fraction échangeable du sol. Par contre, les espèces de plantes étudiées avaient la même sensibilité aux variations de la concentration du calcium échangeable. Le plutonium et l'américium étaient accumulés dans le deuxième horizon du sol et nous avons observé seulement une faible migration plus profondément que 20 cm. Selon le modèle, la migration actuelle du plutonium est très lente et l'absorption par les plantes semble négligeable. Nous avons mesuré entre 0.01 et 0.08 mBq/L de 239Pu dans les solutions de sol brutes. La migration du plutonium par la solution du sol est due principalement aux colloïdes, probablement de nature humique. Résumé grand public Dans les années 1950 à 1960, l'environnement a été contaminé par des éléments radioactifs (radioéléments) artificiels provenant des essais des armes atomiques et de l'industrie nucléaire. En effet, durant ces années, les premiers essais de bombes atomiques se faisaient dans l'atmosphère, libérant de grandes quantités d'éléments radioactifs. De plus certains accidents impliquant l'industrie nucléaire civile ont contribué à la dissémination d'éléments radioactifs dans l'environnement. Ce fut par exemple le cas de l'accident de la centrale atomique de Tchernobyl en 1986 qui a causé une importante contamination d'une grande partie de l'Europe par le 137Cs. Lorsqu'ils sont libérés dans l'atmosphère, les radioéléments sont dispersés et transportés par les courants atmosphériques, puis peuvent être déposés dans l'environnement, principalement par les précipitations. Une fois déposés sur le sol, les radioéléments vont interagir avec les composants du sol et migrer plus ou moins vite. La connaissance des interactions des éléments radioactifs avec le sol est donc importante pour prédire les risques de contamination de l'environnement et de l'homme. Le but général de ce travail était d'évaluer la migration de différents éléments radioactifs (césium-137, strontium-90, plutonium et américium-241) à travers le sol. Nous avons choisi un site d'étude en milieu alpin (Val Piora, Tessin, Suisse), contaminé en radioéléments principalement par les retombées de l'accident de Tchernobyl et des essais atmosphériques de bombes atomiques. Dans un premier temps, nous avons caractérisé la distribution en profondeur des éléments radioactifs dans le sol et l'avons comparée à divers éléments stables. Cette comparaison nous a permit de remarquer que le cuivre et le nickel s'accumulaient dans les mêmes horizons du sol que le strontium-90 et pourraient donc être utilisés comme analogue pour la migration du strontium-90 dans les sols. Dans la plupart des sols étudiés, la migration du césium-137, du plutonium et de l'américium-241 était lente et ces radioéléments étaient donc accumulés dans les premiers centimètres du sol. Par contre, le strontium-90 a migré beaucoup plus rapidement que les autres radioéléments si bien qu'on observe des accumulations de strontium-90 à plus de 30 cm de profondeur. Les radioéléments migrent dans la solution du sol soit sous forme dissoute, soit sous forme colloïdale, c'est-à-dire associés à des particules de diamètre < Ιμηι. Cette association avec des colloïdes permet à des radioéléments peu solubles, comme le plutonium, de migrer plus rapidement qu'attendu. Nous avons voulu savoir quelle était la part de strontium-90 et plutonium associés à des colloïdes dans la solution du sol. Les résultats ont montré que le plutonium en solution était principalement associé à des colloïdes de type organique. Quant au strontium-90, ce dernier était en partie associé à des colloïdes dans des solutions de sol riches en matière organique, par contre, il était principalement sous forme dissoute dans les solutions de sol peu organiques. L'absorption de radioéléments par les plantes représente une voie importante pour le transfert vers la chaîne alimentaire, par conséquent pour la contamination de l'homme. Nous avons donc étudié le transfert du césium-137 et du strontium-90 de plusieurs sols vers différentes espèces de plantes. Les résultats ont montré que l'absorption des radioéléments par les plantes était liée à la concentration de leur analogue chimique (calcium pour le strontium-90 et potassium pour le césium- 137) dans la fraction échangeable du sol. De plus certaines espèces de plantes accumulent significativement moins de strontium-90.

Three essays on major trends in a slow clockspeed industry : the case of industrial automation

The motivation for this research initiated from the abrupt rise and fall of minicomputers which were initially used both for industrial automation and business applications due to their significantly lower cost than their predecessors, the mainframes. Later industrial automation developed its own vertically integrated hardware and software to address the application needs of uninterrupted operations, real-time control and resilience to harsh environmental conditions. This has led to the creation of an independent industry, namely industrial automation used in PLC, DCS, SCADA and robot control systems. This industry employs today over 200'000 people in a profitable slow clockspeed context in contrast to the two mainstream computing industries of information technology (IT) focused on business applications and telecommunications focused on communications networks and hand-held devices. Already in 1990s it was foreseen that IT and communication would merge into one Information and communication industry (ICT). The fundamental question of the thesis is: Could industrial automation leverage a common technology platform with the newly formed ICT industry? Computer systems dominated by complex instruction set computers (CISC) were challenged during 1990s with higher performance reduced instruction set computers (RISC). RISC started to evolve parallel to the constant advancement of Moore's law. These developments created the high performance and low energy consumption System-on-Chip architecture (SoC). Unlike to the CISC processors RISC processor architecture is a separate industry from the RISC chip manufacturing industry. It also has several hardware independent software platforms consisting of integrated operating system, development environment, user interface and application market which enables customers to have more choices due to hardware independent real time capable software applications. An architecture disruption merged and the smartphone and tablet market were formed with new rules and new key players in the ICT industry. Today there are more RISC computer systems running Linux (or other Unix variants) than any other computer system. The astonishing rise of SoC based technologies and related software platforms in smartphones created in unit terms the largest installed base ever seen in the history of computers and is now being further extended by tablets. An underlying additional element of this transition is the increasing role of open source technologies both in software and hardware. This has driven the microprocessor based personal computer industry with few dominating closed operating system platforms into a steep decline. A significant factor in this process has been the separation of processor architecture and processor chip production and operating systems and application development platforms merger into integrated software platforms with proprietary application markets. Furthermore the pay-by-click marketing has changed the way applications development is compensated: Three essays on major trends in a slow clockspeed industry: The case of industrial automation 2014 freeware, ad based or licensed - all at a lower price and used by a wider customer base than ever before. Moreover, the concept of software maintenance contract is very remote in the app world. However, as a slow clockspeed industry, industrial automation has remained intact during the disruptions based on SoC and related software platforms in the ICT industries. Industrial automation incumbents continue to supply systems based on vertically integrated systems consisting of proprietary software and proprietary mainly microprocessor based hardware. They enjoy admirable profitability levels on a very narrow customer base due to strong technology-enabled customer lock-in and customers' high risk leverage as their production is dependent on fault-free operation of the industrial automation systems. When will this balance of power be disrupted? The thesis suggests how industrial automation could join the mainstream ICT industry and create an information, communication and automation (ICAT) industry. Lately the Internet of Things (loT) and weightless networks, a new standard leveraging frequency channels earlier occupied by TV broadcasting, have gradually started to change the rigid world of Machine to Machine (M2M) interaction. It is foreseeable that enough momentum will be created that the industrial automation market will in due course face an architecture disruption empowered by these new trends. This thesis examines the current state of industrial automation subject to the competition between the incumbents firstly through a research on cost competitiveness efforts in captive outsourcing of engineering, research and development and secondly researching process re- engineering in the case of complex system global software support. Thirdly we investigate the industry actors', namely customers, incumbents and newcomers, views on the future direction of industrial automation and conclude with our assessments of the possible routes industrial automation could advance taking into account the looming rise of the Internet of Things (loT) and weightless networks. Industrial automation is an industry dominated by a handful of global players each of them focusing on maintaining their own proprietary solutions. The rise of de facto standards like IBM PC, Unix and Linux and SoC leveraged by IBM, Compaq, Dell, HP, ARM, Apple, Google, Samsung and others have created new markets of personal computers, smartphone and tablets and will eventually also impact industrial automation through game changing commoditization and related control point and business model changes. This trend will inevitably continue, but the transition to a commoditized industrial automation will not happen in the near future.

Connecting India: The rise of standards in service offshoring

This paper explores the role of international standards in the globalisation of the service economy. Various strands of economic analyses consider that core attributes of services affect their ability to be reliably delocalised, industrialised and standardised. In contrast, international political economy (IPE) approaches draw attention to power configurations supporting conflicting use of standards across industries and nations. The paper examines the case of the Indian service industry in business process outsourcing to probe these opposing views. Our findings suggest that standards matter in types of services conventionally identified as unlikely to be standardised, and that their use raise little conflict. An IPE perspective on service standardisation highlights, however, the importance of potential power issues likely to be included in more progressive forms of standardisation

Current and future trens in the quality control of pharmaceuticals and biopharmaticals : impacts on Cost of Goods Sold (COGS)

[Summary] 2. Roles of quality control in the pharmaceutical and biopharmaceutical industries. - 2.1. Pharmaceutical industry. - 2.2. Biopharmaceutical industry. - 2.3. Policy and regulatory. - 2.3.1. The US Food and Drug Administration (FDA). - 2.3.2. The European Medicine Agency (EMEA). - 2.3.3. The Japanese Ministry of Work, Labor and Welfare (MHLW). - 2.3.4. The Swiss Agency for Therapeutic Products (Swissmedic). - 2.3.5. The International Conference on Harmonization (ICH). - - 3. Types of testing. - 3.1. Microbiological purity tests. - 3.2. Physiochemical tests. - 3.3. Critical to quality steps. - 3.3.1. API starting materials and excipients. - 3.3.2. Intermediates. - 3.3.3. APIs (drug substances) and final drug product. - 3.3.4. Primary and secondary packaging materials fro drug products. - - 4. Manufacturing cost and quality control. - 4.1.1. Pharmaceutical manufacturing cost breakdown. - 4.1.2. Biopharmaceutical manufacturing cost breakdown. - 4.2. Batch failure / rejection / rework / recalls. - - 5. Future trends in the quality control of pharmaceuticals and biopharmaceuticals. - 5.1. Rapid and real time testing. - 5.1.1. Physio-chemicals testing. - 5.1.2. Rapid microbiology methods