Growing up with bilateral hippocampal atrophy: from childhood to teenage.

The respective roles of the medial temporal lobe (MTL) structures in memory are controversial. Some authors put forward a modular account according to which episodic memory and recollection-based processes are crucially dependent on the hippocampal formation whereas semantic acquisition and familiarity-based processes rely on the adjacent parahippocampal gyri. Others defend a unitary view. We report the case of VJ, a boy with developmental amnesia of most likely perinatal onset diagnosed at the age of 8. Magnetic resonance imaging (MRI), including quantitative volumetric measurements of the hippocampal formation and of the entorhinal, perirhinal, and temporopolar cortices, showed severe, bilateral atrophy of the hippocampal formation, fornix and mammillary bodies; by contrast, the perirhinal cortex was within normal range and the entorhinal and temporopolar cortex remained within two standard deviations (SDs) from controls' mean. We examined the development of his semantic knowledge from childhood to teenage as well as his recognition and cued recall memory abilities. On tasks tapping semantic memory, VJ increased his raw scores across years at the same rate as children from large standardisation samples, except for one task; he achieved average performance, consistent with his socio-educational background. He performed within normal range on 74% of recognition tests and achieved average to above average scores on 42% of them despite very severe impairment on 82% of episodic recall tasks. Both faces and landscapes-scenes gave rise to above average scores when tested with coloured stimuli. Cued recall, although impaired, was largely superior to free recall. This case supports a modular account of the MTL with episodic, but not semantic memory depending on the hippocampal formation. Furthermore, the overall pattern of findings is consistent with evidence from both brain-damaged and neuroimaging studies indicating that recollection requires intact hippocampal formation and familiarity relies, at least partly, on the adjacent temporal lobe cortex.

Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.

Physical determinants of tennis performance in competitive teenage players

It is unclear how physical attributes influence tennis-specific performance in teenage players. The aims of this study were (a) to examine the relationships between speed, explosive power, leg stiffness, and muscular strength of upper and lower limbs; and (b) to determine to what extent these physical qualities relate to tournament play performance in a group of competitive teenage tennis players. A total of 12 male players aged 13.6 +/- 1.4 years performed a series of physical tests: a 5-m, 10-m, and 20-m sprint; squat jump (SJ); countermovement jump (CMJ); drop jump (DJ); multi-rebound jumps; maximum voluntary contraction of isometric grip strength; and plantar flexor of the dominant and nondominant side. Speed (r = 0.69, 0.63, and 0.74 for 5-, 10-, and 20-m sprints, respectively), vertical power abilities (r = -0.71, -0.80 and -0.66 for SJ, CMJ, and DJ, respectively), and maximal strength in the dominant side (r = -0.67 and -0.73 for handgrip and plantar flexor, respectively) were significantly correlated with tennis performance. However, strength in the nondominant side (r = -0.29 and -0.42 for handgrip and plantar flexor) and leg stiffness (r = -0.15) were not correlated with the performance ranking of the players. It seems that physical attributes have a strong influence on tennis performance in this age group and that an important asymmetry is already observed. By monitoring regularly such physical abilities during puberty, the conditioning coach can modify a program to compensate for the imbalances. This would in turn minimize the risks of injuries during this critical period.

EAACI Position Paper: prevention of work-related respiratory allergies among pre-apprentices or apprentices and young workers.

ABSTRACT: Apprenticeship is a period of increased risk of developing work-related respiratory allergic diseases. There is a need for documents to provide appropriate professional advice to young adults aiming to reduce unsuitable job choices and prevent impairment from their careers. The present document is the result of a consensus reached by a panel of experts from European and non-European countries addressed to allergologists, pneumologists, occupational physicians, primary care physicians, and other specialists interested in this field, which aims to reduce work-related respiratory allergies (rhinoconjunctivitis and asthma) among allergic or nonallergic apprentices and other young adults entering the workforce. The main objective of the document is to issue consensus suggestions for good clinical practice based on existing scientific evidence and the expertise of a panel of physicians.

Adolescent's suicide attempts: populations at risk, vulnerability, and substance use.

Adolescence corresponds to a transition period that requires adaptation and change capacities and skills. Most young people succeed with this challenge, whereas a minority fail. In order to identify with the teenage culture, become autonomous, and differentiate from their parents, some adolescents choose to use drugs, beginning with the use of cigarettes, alcohol, cannabis, followed by other illicit drugs such as opiates and stimulants. A high proportion of these adolescents attempt suicide, which is the primary cause of death during adolescence in many European countries. Who are the "vulnerable" adolescents? What are the mechanisms that can explain the varieties of drug-use initiation or suicide attempts? Can "protective factors" be identified? What kind of strategies might be developed at a social and political level in order to prevent or to minimize drug abuse and suicide attempts, among other harmful behaviors? These issues will be discussed on the basis of the recent literature and in the light of a recent study carried out in the French-speaking part of Switzerland on large cohorts of adolescent drug users. Unresolved critical issues are noted and future needed research is suggested.

Valeur ajoutée de la supervision du médecin-assistant par un médecin de famille dans une permanence [Added value of family practitioners' supervision of junior doctors in a walk-in clinic].

The pending workforce crisis in family medicine has triggered various initiatives. This article describes the PMU-FLON walk-in clinic, a project of the Institute of General Medicine University of Lausanne. The working conditions in this clinic are close to that of a family practice. Doctors in training are supervised by family doctors who work part-time in the clinic. The objective is to improve training in the various fields of family medicine, from technical skills (improving optimal use of diagnostic tools), to integrating patients' requests in a more global patient-centered approach. This new educational model allows doctors in training to benefit from the specific approaches of different trainers. It will contribute to promoting quality family medicine in the future.

Introduction to the special issue on employment discrimination against immigrants

Purpose - This editorial aims to introduce the special issue on employment discrimination against immigrants. Design/methodology/approach - The first part is a commentary on key issues in the study of employment discrimination against immigrants. The second part presents the five articles in the special issue. Findings - The papers in this special issue focus on a variety of issues associated with employment discrimination against immigrants. For example, they consider: discrimination based on accents; differences among justice perceptions among immigrants and non-immigrants; the effects of negative stereotypes on workplace outcomes; the treatment of Hispanic immigrants; and the reasons for the lack of research on Hispanic immigrants. Research limitations/implications - The author comments on key issues that researchers of employment discrimination against immigrants have to take into account. These issues include: the appreciation of the diversity among immigrants; an understanding of the complexity of employment discrimination research; openness to cross-disciplinary approaches; and the consideration of employment discrimination within the context of the immigrant experience. The five articles that make up the special issues vary in their nature (empirical, critical), methodologies (quantitative, qualitative), locations (United States, Germany, and Canada), and implications. Practical implications - The issues discussed in the papers have important implications for understanding and overcoming employment discrimination against immigrants. Originality/value - The Journal of Managerial Psychology invited this special issue to initiate psychological research on employment discrimination against immigrants. The intent is to draw the attention of organizational scholars to the large, yet under-studied immigrant segment of the workforce.

16

The chapter provides an account of the changing role played by active labour market policies (ALMPs) in Europe since the post-war years. Focusing on six countries (Sweden, Denmark, France, Germany, Italy, and the United Kingdom), it shows that the role of ALMPs is related to the broad economic situation. At times of rapid expansion and labour shortage, like the 1950s and 1960s, their key objective was to upskill the workforce. After the oil shocks of the 1970s, the raison d'être of ALMPs shifted from economic to social policy, and since the mid-1990s, we see the development of a new function, well captured by the notion of activation, which refers to the strengthening of work incentives and the removal of obstacles to employment, mostly for low-skilled people. The adequacy between economic context and policy is not always optimal, though. Like other ones, this policy domain suffers from inertia, with the result that the countries that have led the way in one period have more difficulty adapting to the economic conditions prevailing in the following one.

Situation et enjeux sanitaires aux Seychelles en 2012

Off the coast of Kenya, the Seychelles, home to 87,400 inhabitants mostly of African origin, have largely completed their demographic and epidemiologic transitions. Major investments in infrastructure and social services have fostered steady economic growth. Health care and education are free. The predominance of chronic non-communicable diseases and rapid aging of the population nonetheless present significant challenges for public health and the health system. Like the other small island states in the region, the Seychelles continue to be threatened by arbovirus outbreaks. Health indicators are good, but the geographic isolation, the small and aging population, and limited resources make a major challenge maintaining and sustaining an effective workforce of health professionals, a constantly evolving technical platform, and increasing amount of medications particularly in view of the increasing burden of chronic diseases.

Right-left digit ratio (2D:4D) and maximal oxygen uptake.

A low digit ratio (2D:4D) and low 2D:4D in the right compared with the left hand (right-left 2D:4D) are thought to be determined by high in utero concentrations of testosterone, and are related to "masculine" traits such as aggression and performance in sports like running and rugby. Low right-left 2D:4D is also related to sensitivity to testosterone as measured by the number of cytosine-adenine-guanine triplet repeats in exon 1 of the androgen receptor gene. Here we show that low right-left 2D:4D is associated with high maximal oxygen uptake (VO2(max)), high velocity at VO2(max), and high maximum lactate concentration in a sample of teenage boys. We suggest that low right-left 2D:4D is linked to performance in some sports because it is a proxy of high sensitivity to prenatal and maybe also circulating testosterone and high VO2(max).

Topics in public finance: social security and taxation

Summary The field of public finance focuses on the spending and taxing activities of governments and their influence on the allocation of resources and distribution of income. This work covers in three parts different topics related to public finance which are currently widely discussed in media and politics. The first two parts deal with issues on social security, which is in general one of the biggest spending shares of governments. The third part looks at the main income source of governments by analyzing the perceived value of tax competition. Part one deals with the current problem of increased early retirement by focusing on Switzerland as a special case. Early retirement is predominantly considered to be the result of incentives set by social security and the tax system. But the Swiss example demonstrates that the incidence of early retirement has dramatically increased even in the absence of institutional changes. We argue that the wealth effect also plays an important role in the retirement decision for middle and high income earners. An actuarially fair, but mandatory funded system with a relatively high replacement rate may thus contribute to a low labor market participation rate of elderly workers. We provide evidence using a unique dataset on individual retirement decisions in Swiss pension funds, allowing us to perfectly control for pension scheme details. Our findings suggest that affordability is a key determinant in the retirement decisions. The higher the accumulated pension capital, the earlier men, and to a smaller extent women, tend to leave the workforce. The fact that early retirement has become much more prevalent in the last 15 years is a further indicator of the importance of a wealth effect, as the maturing of the Swiss mandatory funded pension system over that period has led to an increase in the effective replacement rates for middle and high income earners. Part two covers the theoretical side of social security. Theories analyzing optimal social security benefits provide important qualitative results, by mainly using one general type of an economy. Economies are however very diverse concerning numerous aspects, one of the most important being the wealth level. This can lead to significant quantitative benefit differences that imply differences in replacement rates and levels of labor supply. We focus on several aspects related to this fact. In a within cohort social security model, we introduce disability insurance with an imperfect screening mechanism. We then vary the wealth level of the model economy and analyze how the optimal social security benefit structure or equivalently, the optimal replacement rates, changes depending on the wealth level of the economy, and if the introduction of disability insurance into a social security system is preferable for all economies. Second, the screening mechanism of disability insurance and the threshold level at which people are defined as disabled can differ. For economies with different wealth levels, we determine for different thresholds the screening level that maximizes social welfare. Finally, part three turns to the income of governments, by adding an element to the controversy on tax competition versus tax harmonization.2 Inter-jurisdictional tax competition can generate at least two potential benefits or costs: On a public level, tax competition may result in a lower or higher efficiency in the production of public services. But there is also a more private benefit in the form of an option for individuals to move to a community with a lower tax rate in the future. To explore the value citizens attach to tax competition we analyze a unique popular vote for a complete tax harmonization between communities in the third largest Swiss canton, Vaud. Although a majority of voters would have seemingly benefited from replacing the current tax rate by a revenue-neutral average tax rate, the proposal was rejected by a large margin. Our estimates suggest that the estimated combined perceived benefit from tax competition is in the range of 10%.

The positive effects of a protean career attitude for self-initiated expatriates: Cultural adjustment as a mediator

Purpose - The authors sought to explain why and how protean career attitude might influence self-initiated expatriates' (SIEs) experiences positively. A mediation model of cultural adjustment was proposed and empirically evaluated. Design/methodology/approach - Data from 132 SIEs in Germany containing measures of protean career attitude, cultural adjustment, career satisfaction, life satisfaction, and intention to stay in the host country were analysed using path analysis with a bootstrap method. Findings - Empirical results provide support for the authors' proposed model: the positive relations between protean career attitude and the three expatriation outcomes (career satisfaction, life satisfaction and intention to stay in the host country) were mediated by positive cross-cultural adjustment of SIEs. Research limitations/implications - All data were cross-sectional from a single source. The sample size was small and included a large portion of Chinese participants. The study should be replicated with samples in other destination countries, and longitudinal research is suggested. Practical implications - By fostering both a protean career attitude in skilled SIE employees and their cultural adjustment, corporations and receiving countries could be able to retain this international workforce better in times of talent shortage. Originality/value - This study contributes to the scarce research on the conceptual relatedness of protean career attitude and SIEs, as well as to acknowledging the cultural diversity of the SIE population.