3D seismic facies characterization and geological patterns recognition (Australian North West Shelf)

EXECUTIVE SUMMARY This PhD research, funded by the Swiss Sciences Foundation, is principally devoted to enhance the recognition, the visualisation and the characterization of geobodies through innovative 3D seismic approaches. A series of case studies from the Australian North West Shelf ensures the development of reproducible integrated 3D workflows and gives new insight into local and regional stratigraphic as well as structural issues. This project was initiated in year 2000 at the Geology and Palaeontology Institute of the University of Lausanne (Switzerland). Several collaborations ensured the improvement of technical approaches as well as the assessment of geological models. - Investigations into the Timor Sea structural style were carried out at the Tectonics Special Research Centre of the University of Western Australia and in collaboration with Woodside Energy in Perth. - Seismic analysis and attributes classification approach were initiated with Schlumberger Oilfield Australia in Perth; assessments and enhancements of the integrated seismic approaches benefited from collaborations with scientists from Schlumberger Stavanger Research (Norway). Adapting and refining from "linear" exploration techniques, a conceptual "helical" 3D seismic approach has been developed. In order to investigate specific geological issues this approach, integrating seismic attributes and visualisation tools, has been refined and adjusted leading to the development of two specific workflows: - A stratigraphic workflow focused on the recognition of geobodies and the characterization of depositional systems. Additionally, it can support the modelling of the subsidence and incidentally the constraint of the hydrocarbon maturity of a given area. - A structural workflow used to quickly and accurately define major and secondary fault systems. The integration of the 3D structural interpretation results ensures the analysis of the fault networks kinematics which can affect hydrocarbon trapping mechanisms. The application of these integrated workflows brings new insight into two complex settings on the Australian North West Shelf and ensures the definition of astonishing stratigraphic and structural outcomes. The stratigraphic workflow ensures the 3D characterization of the Late Palaeozoic glacial depositional system on the Mermaid Nose (Dampier Subbasin, Northern Carnarvon Basin) that presents similarities with the glacial facies along the Neotethys margin up to Oman (chapter 3.1). A subsidence model reveals the Phanerozoic geodynamic evolution of this area (chapter 3.2) and emphasizes two distinct mode of regional extension for the Palaeozoic (Neotethys opening) and Mesozoic (abyssal plains opening). The structural workflow is used for the definition of the structural evolution of the Laminaria High area (Bonaparte Basin). Following a regional structural characterization of the Timor Sea (chapter 4.1), a thorough analysis of the Mesozoic fault architecture reveals a local rotation of the stress field and the development of reverse structures (flower structures) in extensional setting, that form potential hydrocarbon traps (chapter 4.2). The definition of the complex Neogene structural architecture associated with the fault kinematic analysis and a plate flexure model (chapter 4.3) suggest that the Miocene to Pleistocene reactivation phases recorded at the Laminaria High most probably result from the oblique normal reactivation of the underlying Mesozoic fault planes. This episode is associated with the deformation of the subducting Australian plate. Based on these results three papers were published in international journals and two additional publications will be submitted. Additionally this research led to several communications in international conferences. Although the different workflows presented in this research have been primarily developed and used for the analysis of specific stratigraphic and structural geobodies on the Australian North West Shelf, similar integrated 3D seismic approaches will have applications to hydrocarbon exploration and production phases; for instance increasing the recognition of potential source rocks, secondary migration pathways, additional traps or reservoir breaching mechanisms. The new elements brought by this research further highlight that 3D seismic data contains a tremendous amount of hidden geological information waiting to be revealed and that will undoubtedly bring new insight into depositional systems, structural evolution and geohistory of the areas reputed being explored and constrained and other yet to be constrained. The further development of 3D texture attributes highlighting specific features of the seismic signal, the integration of quantitative analysis for stratigraphic and structural processes, the automation of the interpretation workflow as well as the formal definition of "seismo-morphologic" characteristics of a wide range of geobodies from various environments would represent challenging examples of continuation of this present research. The 21st century will most probably represent a transition period between fossil and other alternative energies. The next generation of seismic interpreters prospecting for hydrocarbon will undoubtedly face new challenges mostly due to the shortage of obvious and easy targets. They will probably have to keep on integrating techniques and geological processes in order to further capitalise the seismic data for new potentials definition. Imagination and creativity will most certainly be among the most important quality required from such geoscientists.

Middle and late Cenomanian oceanic anoxic events in shallow and deeper shelf environments of western Morocco

The response of shallow-water sequences to oceanic anoxic event 2 and mid-Cenomanian events 1a and 1b was investigated along the west African margin of Morocco north of Agadir (Azazoul) and correlated with the deep-water sequence of the Tarfaya Basin (Mohammed Beach) based on biostratigraphy, mineralogy, phosphorus and stable isotopes. In the deeper Mohammed Beach section results show double peaks in delta 13C(org) for mid-Cenomanian events 1a and 1b (Rotalipora reicheli biozone, lower CC10a biozone), the characteristic oceanic anoxic event 2 delta 13C excursion (Rotalipora cushmani extinction, top of CC10a biozone) and laminated (anoxic) black shale. In the shallow environment north of Agadir, a fluctuating sea-level associated with dysoxic, brackish and mesotrophic conditions prevailed during the middle to late Cenomanian, as indicated by oyster biostromes, nannofossils, planktonic and benthonic foraminiferal assemblages. Anoxic conditions characteristic of oceanic anoxic event 2 (for example, laminated black shales) did not reach into shallow-water environments until the maximum transgression of the early Turonian. Climate conditions decoupled along the western margin of Morocco between mid-Cenomanian event 1b and the Cenomanian-Turonian boundary, as also observed in eastern Tethys. North of Agadir alternating humid and dry seasonal conditions prevailed, whereas in the Tarfaya Basin the climate was dry and seasonal. This climatic decoupling can be attributed to variations in the Intertropical Convergence Zone and in the intensity of the north-east trade winds in tropical areas.

Evolution of the Helvetic shelf (Switzerland) during the Barremian-early Aptian : paleoenvironmental, paleogeographic and paleoceanographic controlling factors

The Early Cretaceous has experienced the development of large shallow-water carbonate platform in tropical and subtropical regions, favoured by exceptionally warm climatic conditions, optimal trophic conditions and a suitable tectonic and paleogeographic context. This period was also characterized by shorter intervals, in which the widespread deposition of marine sediments enriched in organic matter occurred ("oceanic anoxic episodes": OAE). This study focuses on the Barremian- Aptian interval, during which the Urgonian platform developed throughout the northern Tethyan passive margin. Due to the Alpine orogeny, sediments belonging to this platform - named locally Schrattenkalk Formation, are presently outcropping in the Helvetic Alps. This study aims to reconstruct the paleogeographic evolution of the Helvetic platform, and to define the environmental and oceanographic factors, which influenced its development. Several key episodes in the life of this platform have been identified: - The installation of the platform, covering hemipelagic sediments of the Drusberg Member, near the limit between the early and late Barremian. - The temporary change of carbonate production type during the basal Aptian, with the deposition of the Rawil Member. - And finally the definitive interruption of photozoan carbonate platform sedimentation in the study area, during the early Aptian. The sedimentological, biostratigraphical and chemostratigraphic (8I3C) data lead to the sequential subdivision of eleven sections and one core, located throughout the different Helvetic nappes of Switzerland. The sequence stratigraphie framework, initially defined for the Urgonian carbonate platform of the Vercors area (SE France), is confirmed in the Helvetic nappes, where the same number of sequences was observed. Many similarities between these two areas are put forward in this work. The sequence stratigraphie framework helped to highlight the installation of a bioclastic body, included in the Schrattenkalk Formation, since the middle Early Barremian (sequence B2). The age of the installation of the rudist-rich limestone, which corresponds to the Urgonian facies sensu stricto, is attributed to the late Barremian (maximum flooding surface of the sequence B3). This age coincides with the one determined in other northern Tethyan areas for the installation of the Urgonian platform. The results of this study show a strong tectonic control of the platform architecture, with the presence of syn-sedimentary faults in a perpendicular position to the progradation direction of the platform. The presence of these faults was highlighted by the study of the evolution of the microfacies distribution and by thickness variations in different areas. Sea level fluctuations also played an important role in the various life phases of the platform. Three major falls in sea level have been identified. A significant emersion of the proximal domain has been observed, involving an important drop of the relative sea level, leading to the exposure of the Drusberg Member hemipelagic series. A second major drop in sea level is identified near the Barremian-Aptian boundary, and a third is registered on the top of the Upper Schrattenkalk Member on the whole platform; it is associated with a karst affecting the underlying limestones to a depth of over 20 meters. This observation sheds new light on the conditions linked to the demise of Urgonian platform, which was strongly influenced by this phase of emersion.

Triassic stratigraphic evolution of the Arabian-Greater India embayment of the southern Tethys margin

An exceptional, tectonically remarkably unaffected, nearly 200 m-thick continuous section of hemipelagic and turbiditic sediments, covering most of the Triassic is described from the Batain Complex of north-eastern Oman. According to conodont and radiolarian data the sequence spans the late Scythian to the early Norian, a time period of nearly 30 M. Coupled with a high resolution stratigraphy, the lithostratigraphy, sedimentology, as well as sequence and isotope stratigraphy of the section are documented. For the Triassic of the Batain Plain we propose the new name Sal Formation, which replaces the formerly used Matbat Formation, and subdivide it into three new members. The Sal Formation was deposited on the proximal continental margin of northeastern Arabia and records various depositional environments. The lower member is interpreted as the distal part of a homoclinal ramp which evolves to a distally steepened ramp during time of deposition of the middle member. The upper member displays a toe of slope position which is indicated by an increase of proximal turbidites. These sediments form part of a segment of the Neo-Tethyan embayment between Arabia and India. The stratigraphic analysis indicates highly varying sedimentation rates from a minimum of 2 m/M gamma around the Anisian/Ladinian boundary up to 15 m/M gamma during the Lower and Upper Triassic. Sequence-stratigraphically, the Sal section is subdivided into six third order cycles which are biochronologically well integrated into the global Triassic cycle chart. The mixed siliciclastic-calcareous upper member of the Sal Formation typically shows highstand related carbonate shedding. It is, therefore, an important test case for sequence-stratigraphic controlled carbonate export to mixed basin fills. The well developed sequence stratigraphic cycles are mirrored in the isotope patterns. Additionally, the carbon and oxygen isotope data from the Sal Formation record the same chemostratigraphic marker at the Spathian/Anisian boundary known from other Tethyan sections.

Molecular and isotopic characterization of biomarkers in the Frick Swiss Jura sediments: A palaeoenvironmental reconstruction on the northern Tethys margin

Molecular and stable carbon isotope compositions of source-specific hydrocarbons have been used to reconstruct palaeoenvironmental conditions during deposition of the Middle Hettangian to Upper Sinemurian sediments on the northern epicontinental Tethys margin, Frick Swiss Jura. Increasing algal, cyanobacterial and phytoplanktonic (i.e., dinoflagellate) contributions associated with the C-13-enrichment of cyanobacteria derivatives (i.e., hopanes and monomethylalkanes) suggest enhanced primary productivity upsection. This is related to the C-13-enrichment of dissolved CO2 in the upper layers and the progressive increase of depth and oxygenation of the water column. In the Middle Hettangian shallow-water environments (lagoon), the occurrence of green sulfur bacteria (Chlorobiaceae) derivatives indicates that the lower part of the water column was strictly anoxic and rich in H2S. Since these bacteria require very low light intensity to grow, these euxinic conditions may be extended up to the photic zone, allowing for anaerobic photosynthesis. Light penetration depth is most likely reduced by high productivity and/or turbidity in the photic zone. In these sediments, C-13-depleted hopanoids (-39.5 parts per thousand) are most likely associated with phototrophic purple sulfur bacteria utilizing isotopically light organic carbon at the base of the aerobic zone. These purple sulfur bacteria may have consumed the H2S used by Chlorobiaceae in the deeper layers and thus, sustained the algae and cyanobacteria productivity in the upper layers. The C-13-depleted carbonate (-13.3 parts per thousand) may be partially related to the anaerobic oxidation of the organic matter during bacterial sulfate-reduction. (c) 2006 Elsevier Ltd. All rights reserved.

Sedimentary record of the northward flight of India and its collision with Eurasia (Ladakh Himalaya, India)

Stratigraphic and petrographic analysis of the Cretaceous to Eocene Tibetan sedimentary succession has allowed us to reinterpret in detail the sequence of events which led to closure of Neotethys and continental collision in the NW Himalaya. During the Early Cretaceous, the Indian passive margin recorded basaltic magmatic activity. Albian volcanic arenites, probably related to a major extensional tectonic event, are unconformably overlain by an Upper Cretaceous to Paleocene carbonate sequence, with a major quartzarenite episode triggered by the global eustatic sea-level fall at the Cretaceous/Tertiary boundary. At the same time, Neotethyan oceanic crust was being subducted beneath Asia, as testified by calc-alkalic volcanism and forearc basin sedimentation in the Transhimalayan belt. Onset of collision and obduction of the Asian accretionary wedge onto the Indian continental rise was recorded by shoaling of the outer shelf at the Paleocene/Eocene boundary, related to flexural uplift of the passive margin. A few My later, foreland basin volcanic arenites derived from the uplifted Asian subduction complex onlapped onto the Indian continental terrace. All along the Himalaya, marine facies were rapidly replaced by continental redbeds in collisional basins on both sides of the ophiolitic suture. Next, foreland basin sedimentation was interrupted by fold-thrust deformation and final ophiolite emplacement. The observed sequence of events compares favourably with theoretical models of rifted margin to overthrust belt transition and shows that initial phases of continental collision and obduction were completed within 10 to 15 My, with formation of a proto-Himalayan chain by the end of the middle Eocene.

Aptian to Cenomanian deeper-water hiatal stromatolites from the northern Tethyan margin

A suite of deeper-water hiatal (DWH) stromatolites has been identified in the phosphatic and glauconitic sediments of Aptian to Cenomanian age in the alpine Helvetic thrust-and-fold belt, which represents the former northern Tethyan margin. The most important occurrences date from the latest Early to Late Aptian, the late Early to early middle Albian, and the Early Cenomanian. They are invariably associated with condensed phosphatic beds and occur preferentially on top of hardgrounds or on reworked pebbles and fossils. The zone of optimal stromatolite growth and preservation coincides with the zone of maximal sedimentary condensation, in the deeper parts of phosphogenic areas. The DWH stromatolites show variable morphologies, ranging from isolated laminae ("films") to internally laminated columns and crusts. They reach thicknesses of maximal 10 cm and are either preserved in phosphate or micrite. In the latter case, they may show peripheral impregnations of phosphate or iron oxyhydroxides. The quasi-complete lack of macroscopic sessile organisms suggests that the DWH stromatolites grew close to the upper boundary of an oxygen-minimum zone. Electron-scanning microscopic images show that the Early Cenomanian examples preserved in micrite consist of filamentous structures, which form spaghetti-like assemblages. They are. interpreted as the remains of poikiloaerobic, heterotrophic microbes. Coeval DWH stromatolites are known from the entire European segment of the northern Tethyan margin, and shallow-water counterparts are commonplace on Tethyan carbonate platforms. This indicates that, in general, paleoceanographic and paleoenvironmental conditions were appropriate for stromatolite growth and preservation. The here-described DWH stromatolites proliferated especially in time windows, which followed upon the oceanic anoxic periods OAE la (Early Aptian), lb (latest Aptian and earliest Albian), and Id (latest Albian). They may represent pioneer ecosystems, which thrived during the recovery phases following the "mid"-Cretaceous OAEs.

Active Learning of Very-High Resolution Optical Imagery with SVM: Entropy vs Margin Sampling

An active learning method is proposed for the semi-automatic selection of training sets in remote sensing image classification. The method adds iteratively to the current training set the unlabeled pixels for which the prediction of an ensemble of classifiers based on bagged training sets show maximum entropy. This way, the algorithm selects the pixels that are the most uncertain and that will improve the model if added in the training set. The user is asked to label such pixels at each iteration. Experiments using support vector machines (SVM) on an 8 classes QuickBird image show the excellent performances of the methods, that equals accuracies of both a model trained with ten times more pixels and a model whose training set has been built using a state-of-the-art SVM specific active learning method

Arrested kinetic Li isotope fractionation at the margin of the llimaussaq complex, South Greenland: Evidence for open-system processes during final cooling of peralkaline igneous rocks

Li contents [Li] and isotopic composition (delta Li-7) of mafic minerals (mainly amphibole and clinopyroxene) from the alkaline to peralkaline Ilimaussaq plutonic complex, South Greenland, track the behavior of Li and its isotopes during magmatic differentiation and final cooling of an alkaline igneous system. [Li] in amphibole increase from < 10 ppm in Caamphiboles of the least differentiated unit to >3000 ppm in Na-amphiboles of the highly evolved units. In contrast, [Li] in clinopyroxene are comparatively low (<85 ppm) and do not vary systematically with differentiation. The distribution of Li between amphibole and pyroxene is controlled by the major element composition of the minerals (Ca-rich and Na-rich, respectively) and changes in oxygen fugacity (due to Li incorporation via coupled substitution with ferric iron) during magmatic differentiation. delta(7) Li values of all minerals span a wide range from + 17 to - 8 parts per thousand, with the different intrusive units of the complex having distinct Li isotopic systematics. Amphiboles, which dominate the Li budget of whole-rocks from the inner part of the complex, have constant delta Li-7 of + 1.8 +/- 2.2 parts per thousand (2 sigma, n = 15). This value reflects a homogeneous melt reservoir and is consistent with their mantle derivation, in agreement with published O and Nd isotopic data. Clinopyroxenes of these samples are consistently lighter, with Delta Li-7(amph-cpx). as large as 8 parts per thousand and are thus not in Li isotope equilibrium. These low values probably reflect late-stage diffusion of Li into clinopyroxene during final cooling of the rocks, thus enriching the clinopyroxene in 6 Li. At the margin of the complex delta(7) Li in the syenites increases systematically, from +2 to high values of + 14 parts per thousand. This, coupled with the observed Li isotope systematics of the granitic country rocks, reflects post-magmatic open-system processes occurring during final cooling of the intrusion. Although the shape and magnitude of the Li isotope and elemental profiles through syenite and country rock are suggestive of diffusion-driven isotope fractionation, they cannot be modeled by one-dimensional diffusive transport and point to circulation of a fluid having a high 67 Li value (possibly seawater) along the chilled contact. In all, this study demonstrates that Li isotopes can be used to identify complex fluid- and diffusion-governed processes taking place during the final cooling of such rocks. (c) 2007 Elsevier B.V All rights reserved.

The oldest Triassic platform margin reef from the Alpine - Carpathian region (Aggtelek, NE Hungary): platform evolution, reefal biota and biostratigraphic framework

The 1:10,000 scale mapping of the southern part of the Aggtelek Plateau (Western Carpathians, Silica Nappe, NE Hungary) and the study of five sections revealed two Middle Triassic reef bodies. In the late Pelsonian the uniform Steinalm Platform was drowned and dissected due to the Reifling Event. A connection with the open sea was established, indicated by the appearance of gladigondolellid conodonts from the early Illyrian. Basins and highs were formed. In the NW part of the studied area lower - middle? Illyrian basinal carbonates were followed by a platform margin reef (early? - middle Illyrian; reef stage 1) developed on a morphological high. This is the oldest known Triassic platform margin reef within the Alpine-Carpathian region. The reef association is dominated by sphinctozoans and microproblematics. The fossils are characteristic of the Wetterstein - type reef communities. Differently from this in the SE part of the studied region a basin existed from the late Pelsonian until the early Ladinian. During the late Illyrian - early Ladinian, the reef prograded to the SE, and reef stage 2 was established. Meanwhile, on the NW part of the platform a lagoon was formed behind the reef. Based on our palaeontological study the stratigraphic range of Colospongia catenulata, Follicatena cautica, Solenolmia manon manon, Vesicocaulis oenipontanus must be extended down to the middle Illyrian. Synsedimentary tectonics were detected in the 1. Binodosus Subzone, 2. Trinodosus Zone - the most part of the Reitzi Zone, 3. Avisianum Subzone.

Early Cretaceous (late Berriasian to early Aptian) palaeoceanographic change along the northwestern Tethyan margin (Vocontian Trough, southeastern France): δ13C, δ18O and Sr-isotope belemnite and whole-rock records

Stable carbon, oxygen, and strontium isotope records were obtained from uppermost Hauterivian to lowermost Aptian belemnite rostra, which were collected in well-dated sections from the Vocontian Trough (southeastern France). This data set complements previously published belemnite-isotope records from the uppermost Berriasian-Hauterivian interval from the same basin. The belemnite carbon and oxygen isotope record is compared to the carbonate bulk-rock isotope record from the same sections, and from additional Italian sections. With regards to their long-term trends, both belemnite and whole-rock delta O-18 records are well correlated, except for the uppermost Hauterivian-lower Barremian interval, within which they deviate. This discrepancy is interpreted to be linked to the latest Hauterivian Faraoni oceanic anoxic event and its early Barremian aftermath. The Faraoni level is characterized by enhanced sea-water stratification, probably induced by the onset of a warmer and more humid climate along the northern Tethyan margin. The early Barremian was characterized by stronger vertical sea-water mixing reflected by a decrease in density contrast between sea-surface and deeper waters. The belemnite oxygen isotope record shows a more stable evolution with smaller fluctuations than its bulk-rock counterpart, which indicates that deeper water masses were not as much subjected to density fluctuations as sea-surface water. The comparison of belemnite and bulk-rock carbon isotope records allows observing the impact of regional influence exerted by platform carbonate ooze shedding on the carbon cycle. Discrepancies in the two records are observed during time of photozoan carbonate platform growth. The strontium isotopic record shows a gradual increase from the uppermost Berriasian to the uppermost lower Barremian followed by a rapid decrease until the uppermost Barremian and a renewed small increase within the lowermost Aptian. The major inflection point in the uppermost lower Barremian appears to predate the onset in the formation of the Ontong-Java volcanic plateau.

Post-collisional Neogene magmatism of the Mediterranean Maghreb margin: a consequence of slab breakoff

A 1 200 km-long linear magmatic belt extends along the Mediterranean coast the Maghreb from Eastern Tunisia to Morocco. This belt is mainly composed of Langan calc-alkaline metaluminous to peraluminous granitoids and associated andesites/cites Central and Eastern Algeria. In Tunisia and Oranie/Western Morocco, calc alkaline activity started later (during the Serravallian) and was followed by the placement of alkali basalts and basanites since the Tortonian to the Pliocene and, in me places, the Pleistocene. Available data on the tectonic setting, petrology, age and biochemistry of this belt show that most of its striking features, e.g. (1) very low magma production rate, subduction-related geochemical imprint, extensive crustal contamination the calc-alkaline magmatism and (2) progressive magmatic change from calc-alkaline alkaline, are consistent with magma generation during a slab breakoff process as proposed Carminati et al, in 1998. The magmatism associated with this breakoff started in Central Eastern Algeria at 16 Ma, then propagated eastwards and westwards, The upward of asthenospheric enriched plume-type mantle through the tear in the downgoing first triggered melting of the overlying lithospheric mantle which had been metasomatised during a previous subduction period. Heat supply from this uprising asthenosphere may have warmed up the continental crust and made its involvement in assimilation processes easier. As the asthenosphere ascended through the `window' in the slab, partial melting occurred at the uprising boundary between asthenosphere and lithosphere, generating basalts with transitional characteristics between those of calc-alkaline and alkaline basalts. As the asthhenospheric upwelling proceeded partial:melting then occurred in the sole asthenospheric mantle, producing alkali basalts. (C) 2000 Academie des sciences Editions scientifiques et medicales Elsevier SAS.

Geological setting of the Guelb Moghrein Fe oxide-Cu-Au-Co mineralization, Akjoujt area, Mauritania

The Guelb Moghrein Fe oxide-Cu-Au-Co deposit is located at the western boundary of the West African craton in NW Mauritania. The wall rocks to the mineralization represent a meta-volcanosedimentary succession typical of Archaean greenstone belts. Two types of meta-volcanic rocks are distinguished: (1) volcanoclastic rocks of rhyodacite-dacite composition (Sainte Barbe volcanic unit), which form the stratigraphic base; (2) tholeiitic andesites-basalts (Akjoujt meta-basalt unit). The trace element signature of both types is characteristic of a volcanic arc setting. A small meta-pelitic division belongs to the Sainte Barbe volcanic unit. A meta-carbonate body, which contains the mineralization, forms a tectonic lens in the Akjoujt meta-basalt unit. It can be defined by the high X(mg) (=36) of Fe-Mg carbonate, the REE pattern and the delta(13)C values of -18 to -17 parts per thousand as a marine precipitate similar to Archaean banded iron formation (BIF). Additionally, small slices of Fe-Mg clinoamphibole-chlorite schist in the meta-carbonate show characteristics of marine shale. This assemblage, therefore, does not represent an alteration product, but represents an iron formation unit deposited on a continental shelf, which probably belongs to the Lembeitih Formation. The hydrothermal mineralization at 2492 Ma was contemporaneous with regional D(2) thrusting of the Sainte Barbe volcanic unit and imbrications of the meta-carbonate in the upper greenschist facies. This resulted in the formation of an ore breccia in the meta-carbonate, which is enriched in Fe, Ni, Co, Cu, Bi, Mo, As and Au. Massive sulphide ore breccia contains up to 20 wt% Cu. The ore fluid was aqueous-carbonic in nature and either changed its composition from a Mg-rich oxidizing to an Fe-rich reducing fluid or the two fluid types mixed at the trap site. All lithologies at Guelb Moghrein were deformed by D(3) thrusting to the east in the lower greenschist facies. The mobility of REE in the retrogressed rocks explains the formation of a second generation of hydrothermal monazite, which was dated at c. 1742 Ma. Archaean rocks of the West African craton extend to the west to Guelb Moghrein. The active continental margin was deformed and mineralized in the Late Archaean-Early Proterozoic and again reactivated in the Mid-Proterozoic and Westphalian, showing that the western boundary of the craton was reactivated several times.