In vitro engineering of human stratified urothelium: analysis of its morphology and function.

PURPOSE: Gastric or intestinal patches, commonly used for reconstructive cystoplasty, may induce severe metabolic complications. The use of bladder tissues reconstructed in vitro could avoid these complications. We compared cellular differentiation and permeability characteristics of human native with in vitro cultured stratified urothelium. MATERIALS AND METHODS: Human stratified urothelium was induced in vitro. Morphology was studied with light and electron microscopy and expression of key cellular proteins was assessed using immunohistochemistry. Permeability coefficients were determined by measuring water, urea, ammonia and proton fluxes across the urothelium. RESULTS: As in native urothelium the stratified urothelial construct consisted of basal membrane and basal, intermediate and superficial cell layers. The apical membrane of superficial cells formed villi and glycocalices, and tight junctions and desmosomes were developed. Immunohistochemistry showed similarities and differences in the expression of cytokeratins, integrin and cellular adhesion proteins. In the cultured urothelium cytokeratin 20 and integrin subunits alpha6 and beta4 were absent, and symplekin was expressed diffusely in all layers. Uroplakins were clearly expressed in the superficial umbrella cells of the urothelial constructs, however, they were also present in intermediate and basal cells. Symplekin and uroplakins were expressed only in the superficial cells of native bladder tissue. The urothelial constructs showed excellent viability, and functionally their permeabilities for water, urea and ammonia were no different from those measured in native human urothelium. Proton permeability was even lower in the constructs compared to that of native urothelium. CONCLUSIONS: Although the in vitro cultured human stratified urothelium did not show complete terminal differentiation of its superficial cells, it retained the same barrier characteristics against the principal urine components. These results indicate that such in vitro cultured urothelium, after being grown on a compliant degradable support or in coculture with smooth muscle cells, is suitable for reconstructive cystoplasty.

Translation of biomechanical concepts in bone tissue engineering: from animal study to revision knee arthroplasty.

Bone defects in revision knee arthroplasty are often located in load-bearing regions. The goal of this study was to determine whether a physiologic load could be used as an in situ osteogenic signal to the scaffolds filling the bone defects. In order to answer this question, we proposed a novel translation procedure having four steps: (1) determining the mechanical stimulus using finite element method, (2) designing an animal study to measure bone formation spatially and temporally using micro-CT imaging in the scaffold subjected to the estimated mechanical stimulus, (3) identifying bone formation parameters for the loaded and non-loaded cases appearing in a recently developed mathematical model for bone formation in the scaffold and (4) estimating the stiffness and the bone formation in the bone-scaffold construct. With this procedure, we estimated that after 3 years mechanical stimulation increases the bone volume fraction and the stiffness of scaffold by 1.5- and 2.7-fold, respectively, compared to a non-loaded situation.

Combining geophysical and laboratory measurements for civil Engineering.

The study of wave propagation at sonic frequency in soil leads to elasticity parameter determination. These parameters are compatible to those measured simultaneously by static loading. The acquisition of in situ elasticity parameter combined with laboratory description of the elastoplastic behaviour can lead to in situ elastoplastic curves. - L'étude de la propagation des ondes acoustiques permet la détermination des paramètres d'élasticité dans les sols. Ces paramètres sont cohérents avec des mesures statiques simultanées. L'acquisition des paramètres d'élasticité in situ associée à une description du comportement élasto-plastique mesuré en laboratoire permet d'obtenir des courbes d'élastoplasticité in situ.

Engineering, conjugation, and immunogenicity assessment of Escherichia coli O121 O antigen for its potential use as a typhoid vaccine component.

State-of-the-art production technologies for conjugate vaccines are complex, multi-step processes. An alternative approach to produce glycoconjugates is based on the bacterial N-linked protein glycosylation system first described in Campylobacter jejuni. The C. jejuni N-glycosylation system has been successfully transferred into Escherichia coli, enabling in vivo production of customized recombinant glycoproteins. However, some antigenic bacterial cell surface polysaccharides, like the Vi antigen of Salmonella enterica serovar Typhi, have not been reported to be accessible to the bacterial oligosaccharyltransferase PglB, hence hamper development of novel conjugate vaccines against typhoid fever. In this report, Vi-like polysaccharide structures that can be transferred by PglB were evaluated as typhoid vaccine components. A polysaccharide fulfilling these requirements was found in Escherichia coli serovar O121. Inactivation of the E. coli O121 O antigen cluster encoded gene wbqG resulted in expression of O polysaccharides reactive with antibodies raised against the Vi antigen. The structure of the recombinantly expressed mutant O polysaccharide was elucidated using a novel HPLC and mass spectrometry based method for purified undecaprenyl pyrophosphate (Und-PP) linked glycans, and the presence of epitopes also found in the Vi antigen was confirmed. The mutant O antigen structure was transferred to acceptor proteins using the bacterial N-glycosylation system, and immunogenicity of the resulting conjugates was evaluated in mice. The conjugate-induced antibodies reacted in an enzyme-linked immunosorbent assay with E. coli O121 LPS. One animal developed a significant rise in serum immunoglobulin anti-Vi titer upon immunization.

Bone tissue engineering using foetal cell therapy.

Different cell sources for bone tissue engineering are reviewed. In particular, adult cell source strategies have been based on the implantation of unfractionated fresh bone marrow; purified, culture expanded mesenchymal stem cells, differentiated osteoblasts, or cells that have been modified genetically to express rhBMP. Several limiting factors are mentioned for these strategies such as low number of available cells or possible immunological reaction of the host. Foetal bone cells are presented as an alternative solution and review of actual treatments using these cells is presented. Finally, foetal cells used specifically for bone tissue engineering are characterised and potentially interesting therapeutic options are proposed.

Comparative resilience of clinical perimetric tests to induced levels of intraocular straylight.

PURPOSE: To investigate the effect of intraocular straylight (IOS) induced by white opacity filters (WOF) on threshold measurements for stimuli employed in three perimeters: standard automated perimetry (SAP), pulsar perimetry (PP) and the Moorfields motion displacement test (MDT).¦METHODS: Four healthy young (24-28 years old) observers were tested six times with each perimeter, each time with one of five different WOFs and once without, inducing various levels of IOS (from 10% to 200%). An increase in IOS was measured with a straylight meter. The change in sensitivity from baseline was normalized, allowing comparison of standardized (z) scores (change divided by the SD of normative values) for each instrument.¦RESULTS: SAP and PP thresholds were significantly affected (P < 0.001) by moderate to large increases in IOS (50%-200%). The drop in motion displacement (MD) from baseline with WOF 5, was approximately 5 dB, in both SAP and PP which represents a clinically significant loss; in contrast the change in MD with MDT was on average 1 minute of arc, which is not likely to indicate a clinically significant loss.¦CONCLUSIONS: The Moorfields MDT is more robust to the effects of additional straylight in comparison with SAP or PP.

Engineering polyhydroxyalkanoate content and monomer composition in the oleaginous yeast Yarrowia lipolytica by modifying the ß-oxidation multifunctional protein.

Recombinant strains of the oleaginous yeast Yarrowia lipolytica expressing the PHA synthase gene (PhaC) from Pseudomonas aeruginosa in the peroxisome were found able to produce polyhydroxyalkanoates (PHA). PHA production yield, but not the monomer composition, was dependent on POX genotype (POX genes encoding acyl-CoA oxidases) (Haddouche et al. FEMS Yeast Res 10:917-927, 2010). In this study of variants of the Y. lipolytica β-oxidation multifunctional enzyme, with deletions or inactivations of the R-3-hydroxyacyl-CoA dehydrogenase domain, we were able to produce hetero-polymers (functional MFE enzyme) or homo-polymers (with no 3-hydroxyacyl-CoA dehydrogenase activity) of PHA consisting principally of 3-hydroxyacid monomers (>80%) of the same length as the external fatty acid used for growth. The redirection of fatty acid flux towards β-oxidation, by deletion of the neutral lipid synthesis pathway (mutant strain Q4 devoid of the acyltransferases encoded by the LRO1, DGA1, DGA2 and ARE1 genes), in combination with variant expressing only the enoyl-CoA hydratase 2 domain, led to a significant increase in PHA levels, to 7.3% of cell dry weight. Finally, the presence of shorter monomers (up to 20% of the monomers) in a mutant strain lacking the peroxisomal 3-hydroxyacyl-CoA dehydrogenase domain provided evidence for the occurrence of partial mitochondrial β-oxidation in Y. lipolytica.

On landslide risk, resilience and vulnerability of mountain communities in Central-Eastern Nepal

Executive SummaryIn Nepal, landslides are one of the major natural hazards after epidemics, killing over 100 persons per year. However, this figure is an underreported reflection of the actual impact that landslides have on livelihoods and food security in rural Nepal. With predictions of more intense rainfall patterns, landslide occurrence in the Himalayas is likely to increase and continue to be one of the major impediments to development. Due to the remoteness of many localities and lack of resources, responsibilities for disaster preparedness and response in mountain areas usually lie with the communities themselves. Everyday life is full of risk in mountains of Nepal. This is why mountain populations, as well as other populations living in harsh conditions have developed a number of coping strategies for dealing with adverse situations. Perhaps due to the dispersed and remote nature of landslides in Nepal, there have been few studies on vulnerability, coping- and mitigation strategies of landslide affected populations. There are also few recommendations available to guide authorities and populations how to reduce losses due to landslides in Nepal, and even less so, how to operationalize resilience and vulnerability.Many policy makers, international donors, NGOs and national authorities are currently asking what investments are needed to increase the so-called 'resilience' of mountain populations to deal with climate risks. However, mountain populations are already quite resilient to seasonal fluctuations, temperature variations, rainfall patterns and market prices. In spite of their resilience, they continue to live in places at risk due to high vulnerability caused by structural inequalities: access to land, resources, markets, education. This interdisciplinary thesis examines the concept of resilience by questioning its usefulness and validity as the current goal of international development and disaster risk reduction policies, its conceptual limitations and its possible scope of action. The goal of this study is two-fold: to better define and distinguish factors and relationships between resilience, vulnerability, capacities and risk; and to test and improve a participatory methodology for evaluating landslide risk that can serve as a guidance tool for improving community-based disaster risk reduction. The objective is to develop a simple methodology that can be used by NGOs, local authorities and communities to reduce losses from landslides.Through its six case studies in Central-Eastern Nepal, this study explores the relation between resilience, vulnerability and landslide risk based on interdisciplinary methods, including geological assessments of landslides, semi-structured interviews, focus groups and participatory risk mapping. For comparison, the study sites were chosen in Tehrathum, Sunsari and Dolakha Districts of Central/Eastern Nepal, to reflect a variety of landslide types, from chronic to acute, and a variety of communities, from very marginalized to very high status. The study uses the Sustainable Livelihoods Approach as its conceptual basis, which is based on the notion that access and rights to resources (natural, human/institutional, economic, environmental, physical) are the basis for coping with adversity, such as landslides. The study is also intended as a contribution to the growing literature and practices on Community Based Disaster Risk Reduction specifically adapted to landslide- prone areas.In addition to the six case studies, results include an indicator based methodology for assessing and measuring vulnerability and resilience, a composite risk assessment methodology, a typology of coping strategies and risk perceptions and a thorough analysis of the relation between risk, vulnerability and resilience. The methodology forassessing vulnerability, resilience and risk is relatively cost-effective and replicable in a low-data environment. Perhaps the major finding is that resilience is a process that defines a community's (or system's) capacity to rebound following adversity but it does not necessarily reduce vulnerability or risk, which requires addressing more structural issues related to poverty. Therefore, conclusions include a critical view of resilience as a main goal of international development and disaster risk reduction policies. It is a useful concept in the context of recovery after a disaster but it needs to be addressed in parallel with vulnerability and risk.This research was funded by an interdisciplinary grant (#26083591) from the Swiss National Science Foundation for the period 2009-2011 and a seed grant from the Faculty of Geosciences and Environment at the University of Lausanne in 2008.Résumé en françaisAu Népal, les glissements de terrain sont un des aléas les plus dévastateurs après les épidémies, causant 100 morts par an. Pourtant, ce chiffre est une sous-estimation de l'impact réel de l'effet des glissements sur les moyens de subsistance et la sécurité alimentaire au Népal. Avec des prévisions de pluies plus intenses, l'occurrence des glissements dans les Himalayas augmente et présente un obstacle au développement. Du fait de l'éloignement et du manque de ressources dans les montagnes au Népal, la responsabilité de la préparation et la réponse aux catastrophes se trouve chez les communautés elles-mêmes. Le risque fait partie de la vie quotidienne dans les montagnes du Népal. C'est pourquoi les populations montagnardes, comme d'autres populations vivant dans des milieux contraignants, ont développé des stratégies pour faire face aux situations défavorables. Peu d'études existent sur la vulnérabilité, ceci étant probablement dû à l'éloignement et pourtant, les stratégies d'adaptation et de mitigation des populations touchées par des glissements au Népal existent.Beaucoup de décideurs politiques, bailleurs de fonds, ONG et autorités nationales se demandent quels investissements sont nécessaires afin d'augmenter la 'resilience' des populations de montagne pour faire face aux changements climatiques. Pourtant, ces populations sont déjà résilientes aux fluctuations des saisons, des variations de température, des pluies et des prix des marchés. En dépit de leur résilience, ils continuent de vivre dans des endroits à fort risque à cause des vulnérabilités créées par les inégalités structurelles : l'accès à la terre, aux ressources, aux marchés et à l'éducation. Cette thèse interdisciplinaire examine le concept de la résilience en mettant en cause son utilité et sa validité en tant que but actuel des politiques internationales de développement et de réduction des risques, ainsi que ses limitations conceptuelles et ses possibles champs d'action. Le but de cette étude est double : mieux définir et distinguer les facteurs et relations entre la résilience, la vulnérabilité, les capacités et le risque ; Et tester et améliorer une méthode participative pour évaluer le risque des glissements qui peut servir en tant qu'outil indicatif pour améliorer la réduction des risques des communautés. Le but est de développer une méthodologie simple qui peut être utilisée par des ONG, autorités locales et communautés pour réduire les pertes dues aux glissements.A travers les études de cas au centre-est du Népal, cette étude explore le rapport entre la résilience, la vulnérabilité et les glissements basée sur des méthodes interdisciplinaires ; Y sont inclus des évaluations géologiques des glissements, des entretiens semi-dirigés, des discussions de groupes et des cartes de risques participatives. Pour la comparaison, les zones d'études ont été sélectionnées dans les districts de Tehrathum, Sunsari et Dolakha dans le centre-est du Népal, afin de refléter différents types de glissements, de chroniques à urgents, ainsi que différentes communautés, variant de très marginalisées à très haut statut. Pour son cadre conceptuel, cette étude s'appuie sur l'approche de moyens de subsistance durable, qui est basée sur les notions d'accès et de droit aux ressources (naturelles, humaines/institutionnelles, économiques, environnementales, physiques) et qui sont le minimum pour faire face à des situations difficiles, comme des glissements. Cette étude se veut aussi une contribution à la littérature et aux pratiques en croissantes sur la réduction des risques communautaires, spécifiquement adaptées aux zones affectées par des glissements.En plus des six études de cas, les résultats incluent une méthodologie basée sur des indicateurs pour évaluer et mesurer la vulnérabilité et la résilience, une méthodologie sur le risque composé, une typologie de stratégies d'adaptation et perceptions des risques ainsi qu'une analyse fondamentale de la relation entre risque, vulnérabilité et résilience. Les méthodologies pour l'évaluation de la vulnérabilité, de la résilience et du risque sont relativement peu coûteuses et reproductibles dans des endroits avec peu de données disponibles. Le résultat probablement le plus pertinent est que la résilience est un processus qui définit la capacité d'une communauté (ou d'un système) à rebondir suite à une situation défavorable, mais qui ne réduit pas forcement la vulnérabilité ou le risque, et qui requiert une approche plus fondamentale s'adressant aux questions de pauvreté. Les conclusions incluent une vue critique de la résilience comme but principal des politiques internationales de développement et de réduction des risques. C'est un concept utile dans le contexte de la récupération après une catastrophe mais il doit être pris en compte au même titre que la vulnérabilité et le risque.Cette recherche a été financée par un fonds interdisciplinaire (#26083591) du Fonds National Suisse pour la période 2009-2011 et un fonds de préparation de recherches par la Faculté des Géosciences et Environnement à l'Université de Lausanne en 2008.

Hand-in-hand advances in biomedical engineering and sensorimotor restoration.

BACKGROUND: Living in a multisensory world entails the continuous sensory processing of environmental information in order to enact appropriate motor routines. The interaction between our body and our brain is the crucial factor for achieving such sensorimotor integration ability. Several clinical conditions dramatically affect the constant body-brain exchange, but the latest developments in biomedical engineering provide promising solutions for overcoming this communication breakdown. NEW METHOD: The ultimate technological developments succeeded in transforming neuronal electrical activity into computational input for robotic devices, giving birth to the era of the so-called brain-machine interfaces. Combining rehabilitation robotics and experimental neuroscience the rise of brain-machine interfaces into clinical protocols provided the technological solution for bypassing the neural disconnection and restore sensorimotor function. RESULTS: Based on these advances, the recovery of sensorimotor functionality is progressively becoming a concrete reality. However, despite the success of several recent techniques, some open issues still need to be addressed. COMPARISON WITH EXISTING METHOD(S): Typical interventions for sensorimotor deficits include pharmaceutical treatments and manual/robotic assistance in passive movements. These procedures achieve symptoms relief but their applicability to more severe disconnection pathologies is limited (e.g. spinal cord injury or amputation). CONCLUSIONS: Here we review how state-of-the-art solutions in biomedical engineering are continuously increasing expectances in sensorimotor rehabilitation, as well as the current challenges especially with regards to the translation of the signals from brain-machine interfaces into sensory feedback and the incorporation of brain-machine interfaces into daily activities.