Stable hydrogen and oxygen isotope composition of waters from mine tailings in different climatic environments

The stable isotope composition of waters (delta H-2, delta O-18) can be used as a natural tracer of hydrologic processes in systems affected by acid mine drainage. We investigated the delta H-2 and delta O-18 values of pore waters from four oxidizing sulfidic mine tailings impoundments in different climatic regions of Chile (Piuquenes at La Andina with Alpine climate, Cauquenes and Caren at El Teniente with Mediterranean climate, and Talabre at the Chuquicamata deposit with hyperarid climate). No clear relationship was found between altitude and isotopic composition. The observed displacement of the tailings pore waters from the local meteoric water line toward higher delta O-18 values (by similar to +2% delta O-18 relative to delta H-2) is partly due to water-rock interaction processes, including hydration and O-isotope exchange with sulfates and Fe(III) oxyhydroxides produced by pyrite oxidation. In most tailings, from the saturated zone toward the surface, isotopically different zones can be distinguished. Zone I is characterized by an upward depletion of H-2 and O-18 in the pore waters from the saturated zone and the lowermost vadose zone, due to ascending diffused isotopically light water triggered by the constant loss of water vapor by evaporation at the surface. In zone II, the capillary flow of a mix of vapor and liquid water causes an evaporative isotopic enrichment in H-2 and O-18. At the top of the tailings in dry climate a zone III between the capillary zone and the surface contains isotopically light diffused and atmospheric water vapor. In temperate climates, the upper part of the profile is affected by recent rainfall and zone III may not differ isotopically from zone II.

Environmental and biological controls on the geochemistry (δ18O, δ13C, Mg/Ca, and Sr/Ca) of living ostracods from Lake Geneva

ABSTRACT : Ostracods are benthic microcrustaceans enclosed in low-Mg calcite bivalves. Stable isotope compositions, Mg/Ca, and Sr/Ca ratios of ostracod fossil valves have proven useful to reconstruct past environmental conditions. Yet, several discrepancies persist and the influence of many factors remains unclear. It is the aim of this study to improve the use of ostracod valve geochemistry as palaeoenvironmental proxies by examining the extent of isotope fractionation and trace element partitioning during valve calcification. To achieve this, the environmental parameters (pH, temperature) and chemical composition of water (C-and O-isotope composition and calcium, magnesium, and strontium content) were measured at sites where living ostracods were sampled. The sampling was on a monthly basis over the course of one year at five different water depths (2, 5, 13, 33, and 70 m) in Lake Geneva, Switzerland. The one-year sampling enabled collection of environmental data for bottom and interstitial pore water. In littoral to sublittoral zones, C-isotope composition of DIC and the Mg/Ca and Sr/Ca ratios of water are found to vary concomitantly with water temperature. This is due to the precipitation of calcite, which is induced by higher photosynthetic activity as temperature and/or solar radiation intensify in summer. In deeper zones, environmental parameters remain largely constant throughout the year. Variations of pH, DIC concentrations and C-isotope compositions in interstitial water result from aerobic as well as anaerobic respiration, calcite dissolution and methanogenesis. Bathymetric distribution, life cycles, and habitats were derived for 15 ostracod species and are predominantly related to water temperature and sediment texture. O-isotope compositions of ostracod valves in Lake Geneva reflect that of water and temperature. However, offsets of up to 3 permil are observed in comparison with proposed inorganic calcite precipitation equilibrium composition. Deprotonation of HCO3- and/or salt effect at crystallisation sites may explain the disequilibrium observed for O-isotopic compositions. C-isotope compositions of ostracod valves are not as well constrained and appear to be controlled by a complex interaction between habitat preferences and seasonal as well as spatial variations of the DIC isotope composition. For infaunal forms, C-isotope compositions reflect mainly the variation of DIC isotope composition in interstitial pore waters. For epifaunal forms, C-isotope compositions reflect the seasonal variation of DIC isotope compositions. C-isotope compositions of ostracod valves is at equilibrium with DIC except for a small number of species (L. inopinata, L. sanctipatricii and possibly C. ophtalmica, and I. beauchampi). Trace element uptake differs considerably from species to species. For most epifaunal forms, trace element content follows the seasonal cycle, recording temperature increases and/or variations of Mg/Ca and Sr/Ca ratios of water. In contrast, infaunal forms are predominantly related to sediment pore water chemistry. RÉSUMÉ EN FRANÇAIS : Les ostracodes sont de petits crustacés benthiques qui possèdent une coquille faite de calcite à faible teneur en magnésium. La composition isotopique et les rapports Mg/Ca et Sr/Ca d'ostracodes fossiles ont été utilisés maintes fois avec succès pour effectuer des reconstructions paléoenvironnementales. Néanmoins, certains désaccords persistent sur l'interprétation de ces données. De plus, l'influence de certains facteurs pouvant biaiser le signal reste encore inconnue. Ainsi, le but de cette étude est de rendre plus performant l'emploi de la composition géochimique des ostracodes comme indicateur paléoenvironnemental. Pour réaliser cela, cinq sites situés dans le Léman à 2, 5, 13, 33 et 70 m de profondeur ont été choisis pour effectuer les échantillonnages. Chaque site a été visité une fois par mois durant une année. Les différents paramètres environnementaux (pH, température) ainsi que la composition géochimique de l'eau (composition isotopique de l'oxygène et du carbone ainsi que teneur en calcium, magnésium et strontium) ont été déterminés pour chaque campagne. Des ostracodes vivants ont été récoltés au cinq sites en même temps que les échantillons d'eau. Ce travail de terrain a permis de caractériser la géochimie de l'eau se trouvant juste au-dessus des sédiments ainsi que celle de l'eau se trouvant dans les interstices du sédiment. Dans les zones littorales à sublittorales, la composition isotopique du carbone inorganique dissout (CID) ainsi que les rapports Mg/Ca et Sr/Ca de l'eau varient linéairement avec la température. Ceci peut être expliqué par la précipitation de calcite qui est contrôlée par l'activité photosynthétique, variant elle même linéairement avec la température. Dans les zones plus profondes, les paramètres environnementaux restent relativement constants tout au long de l'année. Les variations du pH, de la concentration et de la composition isotopique du CID dans les sédiments résultent de la libération de carbone engendrée par la dégradation de la matière organique avec présence d'oxygène ou via réduction de nitrates et de sulfates, par la dissolution de carbonates, ainsi que par la méthanogenèse. La distribution bathymétrique, le cycle de vie ainsi que l'habitat de 15 espèces ont été déterminés. Ceux-ci sont principalement reliés à la température de l'eau et à la texture des sédiments. La composition isotopique de l'oxygène des valves d'ostracodes reflète celle de l'eau et la température qui régnait lors de la calcification. Néanmoins, des écarts pouvant aller jusqu'à 3 0/00 par rapport à l'équilibre théorique ont été obtenus. La déprotonation de HCO3 ou un 'effet de sel' pourrait être à l'origine du déséquilibre observé. La composition isotopique du carbone des valves d'ostracodes n'est pas aussi bien cernée. Celle-ci semble être principalement contrôlée par une interaction complexe entre l'habitat des ostracodes et les variations saisonnières et spatiales de la composition isotopique du CID. Pour les espèces endofaunes, la composition isotopique du carbone reflète principalement la variation de la composition isotopique du CID à l'intérieur des sédiments. Pour les formes épifaunes, c'est la variation saisonnière de la composition du CID qui contrôle celle de la coquille des ostracodes. En général, la composition isotopique du carbone des valves d'ostracodes est en équilibre avec celle de CID, hormis pour quelques rares espèces (L. inopinata, L. sanctipatricii et peut-être C. ophtalmica et I. beauchampi). L'incorporation des éléments traces diffère passablement d'une espèce à l'autre. Pour la plupart des espèces épifaunes, la teneur en éléments traces des coquilles reflète les variations saisonnières. Ces espèces semblent enregistrer les variations soit de la température soit des rapports Mg/Ca et Sr/Ca de l'eau. La teneur en élément traces des formes infaunales, au contraire, est principalement reliée à la chimie de l'eau interstitielle. RÉSUMÉ GRAND-PUBLIC : La connaissance de l'évolution du climat dans le futur est primordiale pour notre société, car elle permet de développer différentes stratégies pour faire face aux problèmes engendrés pas le changement climatique : stratégies environnementale, humanitaire, ou encore économique. Cette problématique est actuellement, à juste titre, sujet d'une vive préoccupation. La géologie peut-elle contribuer à l'effort communautaire entrepris? Naturellement, ce sont les climatologues qui sont sur le devant de la scène. Il n'empêche que ces derniers, pour pouvoir prédire l'avenir, doivent s'appuyer sur le passé. La géologie est alors d'un grand intérêt car c'est effectivement la seule science qui permette d'estimer les variations climatiques à grande échelle sur de longues périodes. Ainsi, voulant moi-même contribuer aux recherches menées dans ce domaine, je me suis tourné à la fin de mes études vers la paléoclimatologie, science qui a pour but de reconstruire le climat des temps anciens. Nous nous sommes rendu compte que l'évolution climatique de la région où nous habitons n'avait pas encore fait le sujet d'études approfondies. Il est pourtant important de connaître la variation locale des changements climatiques pour obtenir des modèles climatiques fiables. En conséquence, un vaste projet a vu le jour : reconstruire, à l'aide des sédiments du lac Léman, les variations paléoclimatiques et paléo-environnementales depuis le retrait du Glacier de Rhône, il y a environ 15'000 ans, jusqu'à nos jours. Pour ce genre de travail, la géochimie, qui est une forme de chimie, utilisée en science de la terre regroupant la chimie classique et la chimie isotopique, est une alliée particulièrement efficace. Elle permet en effet, via différentes mesures faites sur des archives géologiques (par exemple des fossiles ou des sédiments) d'obtenir des informations, souvent quantitatives, sur les conditions (le climat, la flore ou encore la bio productivité, etc...) qui régnaient il y a fort longtemps. Les coquilles d'ostracodes, qui sont de petits animaux vivant au fond des lacs, sont une des archives les plus prometteuses. Ces animaux sont des petits crustacés s'entourant d'une coquille calcaire qu'ils sécrètent eux-mêmes. A la mort de l'animal, la coquille est intégrée dans les sédiments et reste intacte à travers les âges. Des études ont montré qu'en analysant la géochimie de ces coquilles fossiles, il est possible de reconstruire les conditions environnementales qui régnaient à l'époque de vie de ces fossiles. Cette démarche nécessite qu'une condition bien précise soit remplie: la composition géochimique de la coquille doit enregistrer de manière fidèle la chimie de l'eau et/ou la température de l'eau présentes au moment de la sécrétion de la coquille. Le but spécifique de notre recherche a précisément été d'étudier la façon dont la chimie de l'eau ainsi que sa température sont enregistrées dans la coquillé des ostracodes. Une fois les relations entre ces divers paramètres dans l'étant actuel du système établies, il sera alors possible de les utiliser pour interpréter des données issues de coquilles fossiles. Pour ce faire, nous avons mesuré la température de l'eau de manière continue et récolté mensuellement des échantillons d'eau et des ostracodes vivants pendant une année. Cinq sites situés à 2, 5, 13, 33 et 70 mètres de profondeur ont été choisis pour effectuer ces échantillonnages dans le Léman. Le travail de terrain nous a amené à étudier la biologie de 15 espèces. Nous avons pu établir la profondeur à laquelle vivent ces animaux, leur période de développement ainsi que leur habitat respectifs. Ces résultats ont permis de mieux cerner la relation qu'il existe entre la chimie de l'eau, sa température et la composition géochimique des coquilles d'ostracodes. Nous avons ainsi pu confirmer que les coquilles d'ostracodes enregistrent de manière fidèle la composition chimique et isotopique de l'eau. De même, nous avons pu établir de manière plus précise l'effet de la température sur la géochimie des coquilles. Néanmoins, les relations trouvées entre ces trois éléments sont plus complexes pour certaines espèces, cette complexité étant souvent liée à un caractère spécifique de leur écologie. Nous avons mis en lumière certains effets qui biaisent les résultats et défini précisément les conditions dans lesquelles on peut s'attendre à avoir des difficultés dans leur interprétation. Maintenant que nous avons établi les relations entre le climat actuel et la composition géochimique des coquilles d'ostracodes actuels, nous pouvons, sur la base de ce modèle, reconstruire le climat depuis le retrait du Glacier du Rhône jusqu'à nos jours à l'aide d'ostracodes fossiles. Mais cela est une autre histoire et fera, je l'espère, le sujet de nos futures recherches.

Low molecular weight carboxylic acids in oxidizing porphyry copper tailings

The distribution of low molecular weight carboxylic acids (LMWCA) was investigated in pore water profiles from two porphyry copper tailings impoundments in Chile (Piuquenes at La Andina and Cauquenes at El Teniente mine). The objectives of this study were (1) to determine the distribution of LMWCA, which are interpreted to be the metabolic byproducts of the autotroph microbial community in this low organic carbon system, and (2) to infer the potential role of these acids in cycling of Fe and other elements in the tailings impoundments. The speciation and mobility of iron, and potential for the release of H+ via hydrolysis of the ferric iron, are key factors in the formation of acid mine drainage in sulfidic mine wastes. In the low-pH oxidation zone of the Piuquenes tailings, Fe(III) is the dominant iron species and shows high mobility. LMWCA, which occur mainly between the oxidation front down to 300 cm below the tailings surface at both locations (e.g., max concentrations of 0.12 mmol/L formate, 0.17 mmol/L acetate, and 0.01 mmol/L pyruvate at Piuquenes and 0.14 mmol/L formate, 0.14 mmol/L acetate, and 0.006 mmol/L pyruvate at Cauquenes), are observed at the same location as high Fe concentrations (up to 71.2 mmol/L Fe(II) and 16.1 mmol/L Fe(III), respectively). In this zone, secondary Fe(111) hydroxides are depleted. Our data suggest that LMWCA may influence the mobility of iron in two ways. First, complexation of Fe(III), through formation of bidentate Fe(III)-LMWCA complexes (e.g., pyruvate, oxalate), may enhance the dissolution of Fe(III) (oxy)hydroxides or may prevent precipitation of Fe(III) (oxy)hydroxides. Soluble Fe(III) chelate complexes which may be mobilized downward and convert to Fe(II) by Fe(III) reducing bacteria. Second, monodentate LMWCA (e.g., acetate and formate) can be used by iron-reducing bacteria as electron donors (e.g., Acidophilum spp.), with ferric iron as the electron acceptor. These processes may, in part, explain the low abundances of secondary Fe(III) hydroxide precipitates below the oxidation front and the high concentrations of Fe(II) observed in the pore waters of some low-sulfide systems. The reduction of Fe(III) and the subsequent increase of iron mobility and potential acidity transfer (Fe(II) oxidation can result in the release of H+ in an oxic environment) should be taken in account in mine waste management strategies.

Sulfur isotope variations from orebody to hand-specimen scale at the Mezica lead-zinc deposit, Slovenia: a predominantly biogenic pattern

The Mississippi Valley-type (MVT) Pb-Zn ore district at Mezica is hosted by Middle to Upper Triassic platform carbonate rocks in the Northern Karavanke/Drau Range geotectonic units of the Eastern Alps, northeastern Slovenia. The mineralization at Mezica covers an area of 64 km(2) with more than 350 orebodies and numerous galena and sphalerite occurrences, which formed epigenetically, both conformable and discordant to bedding. While knowledge on the style of mineralization has grown considerably, the origin of discordant mineralization is still debated. Sulfur stable isotope analyses of 149 sulfide samples from the different types of orebodies provide new insights on the genesis of these mineralizations and their relationship. Over the whole mining district, sphalerite and galena have delta(34)S values in the range of -24.7 to -1.5% VCDT (-13.5 +/- 5.0%) and -24.7 to -1.4% (-10.7 +/- 5.9%), respectively. These values are in the range of the main MVT deposits of the Drau Range. All sulfide delta(34)S values are negative within a broad range, with delta(34)S(pyrite) < delta(34)S(sphalerite) < delta(34)S(galena) for both conformable and discordant orebodies, indicating isotopically heterogeneous H(2)S in the ore-forming fluids and precipitation of the sulfides at thermodynamic disequilibrium. This clearly supports that the main sulfide sulfur originates from bacterially mediated reduction (BSR) of Middle to Upper Triassic seawater sulfate or evaporite sulfate. Thermochemical sulfate reduction (TSR) by organic compounds contributed a minor amount of (34)S-enriched H(2)S to the ore fluid. The variations of delta(34)S values of galena and coarse-grained sphalerite at orefield scale are generally larger than the differences observed in single hand specimens. The progressively more negative delta(34)S values with time along the different sphalerite generations are consistent with mixing of different H(2)S sources, with a decreasing contribution of H(2)S from regional TSR, and an increase from a local H(2)S reservoir produced by BSR (i.e., sedimentary biogenic pyrite, organo-sulfur compounds). Galena in discordant ore (-11.9 to -1.7%; -7.0 +/- 2.7%, n=12) tends to be depleted in (34)S compared with conformable ore (-24.7 to -2.8%, -11.7 +/- 6.2%, n=39). A similar trend is observed from fine-crystalline sphalerite I to coarse open-space filling sphalerite II. Some variation of the sulfide delta(34)S values is attributed to the inherent variability of bacterial sulfate reduction, including metabolic recycling in a locally partially closed system and contribution of H(2)S from hydrolysis of biogenic pyrite and thermal cracking of organo-sulfur compounds. The results suggest that the conformable orebodies originated by mixing of hydrothermal saline metal-rich fluid with H(2)S-rich pore waters during late burial diagenesis, while the discordant orebodies formed by mobilization of the earlier conformable mineralization.

Anatomy of contaminated aquifers of an industrial site: insights from the stable isotope compositions of waters and dissolved inorganic carbon

The hydrogen and oxygen isotopes of water and the carbon isotope composition of dissolved inorganic carbon (DIC) from different aquifers at an industrial site, highly contaminated by organic pollutants representing residues of the former gas production, have been used as natural tracers to characterize the hydrologic system. On the basis of their stable isotope compositions as well as the seasonal variations, different groups of waters (precipitation, surface waters, groundwaters and mineral waters) as well as seasonably variable processes of mixing between these waters can clearly be distinguished. In addition, reservoir effects and infiltration rates can be estimated. In the northern part of the site an influence of uprising mineral waters within the Quaternary aquifers, presumably along a fault zone, can be recognized. Marginal infiltration from the Neckar River in the cast and surface water infiltration adjacent to a steep hill on the western edge of the site with an infiltration rate of about one month can also be resolved through the seasonal variation. Quaternary aquifers closer to the centre of the site show no seasonal variations, except for one borehole close to a former mill channel and another borehole adjacent to a rain water channel. Distinct carbon isotope compositions and concentrations of DIC for these different groups of waters reflect variable influence of different components of the natural carbon cycle: dissolution of marine carbonates in the mineral waters, biogenic, soil-derived CO2 in ground- and surface waters, as well as additional influence of atmospheric CO2 for the surface waters. Many Quaternary aquifer waters have, however, distinctly lower delta(13)C(DIC) values and higher DIC concentrations compared to those expected for natural waters. Given the location of contaminated groundwaters at this site but also in the industrially well-developed valley outside of this site, the most likely source for the low C-13(DIC) values is a biodegradation of anthropogenic organic substances, in particular the tar oils at the site.

Pore space analysis of beech wood: The vessel network

Water transport in wood is vital for the survival of trees. With synchrotron radiation X-ray tomographic microscopy (SRXTM), it has become possible to characterize and quantify the three-dimensional (3D) network formed by vessels that are responsible for longitudinal transport. In the present study, the spatial size dependence of vessels and the organization inside single growth rings in terms of vessel-induced porosity was studied by SRXTM. Network characteristics, such as connectivity, were deduced by digital image analysis from the processed tomographic data and related to known complex network topologies.

The composition of mineral waters sourced from Europe and North America in respect to bone health: composition of mineral water optimal for bone.

The consumption of mineral waters is increasing in industrialised countries. High intakes of Ca and other alkalising cations as well as a low acid intake are beneficial to bone. We examined which components of mineral waters are conditioning their Ca content and their alkalinising power, in order to define the optimal profile. European mineral waters were randomly selected on the Internet: 100 waters with less than 200 mg Ca/l (9.98 mEq/l) and fifty with more than 200 mg/l, all with complete data for SO4, P, Cl, Na, K, Mg and Ca, and most also for HCO3. For comparison, forty North American mineral waters were randomly chosen. The potential renal acid load (PRAL) was calculated for each mineral water. North American waters did not reveal significant results because of their low mineralisation. We performed correlations between all eight components in order to explore the properties of the mineral waters. In the European waters, twenty-six out of twenty-eight correlations showed a P value of <or= 0.01. In waters with PRAL >0 (acidifying waters), PRAL was positively correlated with SO4, Ca, K and Mg (P < 0.001). In those with PRAL < 0 (alkalinising waters), PRAL was negatively correlated with HCO3, Na, Mg, Ca, K, Cl and SO4 (P < 0.001). SO4 and HCO3 were not found together in high quantities in the same water for geochemical reasons. A high Ca content is associated with either a high SO4 or a high HCO3 content. SO4 theoretically increases Ca excretion, while HCO3 and low PRAL values are associated with positive effects on bone. Therefore, the best waters for bone health are rich in both HCO3 and Ca, and by consequence low in SO4.

Use-dependent block of the voltage-gated Na+ channel by tetrodotoxin and saxitoxin: Effect of pore mutations that change ionic selectivity.

Voltage-gated Na(+) channels (NaV channels) are specifically blocked by guanidinium toxins such as tetrodotoxin (TTX) and saxitoxin (STX) with nanomolar to micromolar affinity depending on key amino acid substitutions in the outer vestibule of the channel that vary with NaV gene isoforms. All NaV channels that have been studied exhibit a use-dependent enhancement of TTX/STX affinity when the channel is stimulated with brief repetitive voltage depolarizations from a hyperpolarized starting voltage. Two models have been proposed to explain the mechanism of TTX/STX use dependence: a conformational mechanism and a trapped ion mechanism. In this study, we used selectivity filter mutations (K1237R, K1237A, and K1237H) of the rat muscle NaV1.4 channel that are known to alter ionic selectivity and Ca(2+) permeability to test the trapped ion mechanism, which attributes use-dependent enhancement of toxin affinity to electrostatic repulsion between the bound toxin and Ca(2+) or Na(+) ions trapped inside the channel vestibule in the closed state. Our results indicate that TTX/STX use dependence is not relieved by mutations that enhance Ca(2+) permeability, suggesting that ion-toxin repulsion is not the primary factor that determines use dependence. Evidence now favors the idea that TTX/STX use dependence arises from conformational coupling of the voltage sensor domain or domains with residues in the toxin-binding site that are also involved in slow inactivation.

The fou2 gain-of-function allele and the wild-type allele of Two Pore Channel 1 contribute to different extents or by different mechanisms to defense gene expression in Arabidopsis.

The fatty acid oxygenation up-regulated 2 (fou2) mutant in Arabidopsis thaliana creates a gain-of-function allele in a non-selective cation channel encoded by the Two Pore Channel 1 (TPC1) gene. This mutant genetically implicates cation fluxes in the control of the positive feedback loop whereby jasmonic acid (JA) stimulates its own synthesis. In this study we observed extensive transcriptome reprogramming in healthy fou2 leaves closely resembling that induced by treatment with methyl jasmonate, biotic stresses and the potassium starvation response. Proteomic analysis of fou2 leaves identified increased levels of seven biotic stress- and JA-inducible proteins. In agreement with these analyses, epistasis studies performed by crossing fou2 with aos indicated that elevated levels of JA in fou2 are the major determinant of the mutant phenotype. In addition, generation of fou2 aba1-5, fou2 etr1-1 and fou2 npr1-1 double mutants showed that the fou2 phenotype was only weakly affected by ABA levels and unaffected by mutations in NPR1 and ETR1. The results now suggest possible mechanisms whereby fou2 could induce JA synthesis/signaling early in the wound response. In contrast to fou2, transcriptome analysis of a loss-of-function allele of TPC1, tpc1-2, revealed no differential expression of JA biosynthesis genes in resting leaves. However, the analysis disclosed reduced mRNA levels of the pathogenesis-related genes PDF1.2a and THI2.1 in healthy and diseased tpc1-2 leaves. The results suggest that wild-type TPC1 contributes to their expression by mechanisms somewhat different from those affecting their expression in fou2.

Pore-forming pyocin S5 utilizes the FptA ferripyochelin receptor to kill Pseudomonas aeruginosa.

Pyocins are toxic proteins produced by some strains of Pseudomonas aeruginosa that are lethal for related strains of the same species. Some soluble pyocins (S2, S3 and S4) were previously shown to use the pyoverdine siderophore receptors to enter the cell. The P. aeruginosa PAO1 pore-forming pyocin S5 encoding gene (PAO985) was cloned into the expression vector pET15b, and the affinity-purified protein product tested for its killing activity against different P. aeruginosa strains. The results, however, did not show any correlation with a specific ferripyoverdine receptor. To further identify the S5 receptor, transposon mutants were generated. Pooled mutants were exposed to pyocin S5 and the resistant colonies growing in the killing zone were selected. The majority of S5-resistant mutants had an insertion in the fptA gene encoding the receptor for the siderophore pyochelin. Complementation of an fptA transposon mutant with the P. aeruginosa fptA gene in trans restored the sensitivity to S5. In order to define the receptor-binding domain of pyocin S5, two hybrid pyocins were constructed containing different regions from pyocin S5 fused to the C-terminal translocation and DNase killing domains of pyocin S2. Only the protein containing amino acid residues 151 to 300 from S5 showed toxicity, indicating that the pyocin S5 receptor-binding domain is not at the N-terminus of the protein as in other S-type pyocins. Pyocin S5 was, however, unable to kill Burkholderia cenocepacia strains producing a ferripyochelin FptA receptor, nor was the B. cenocepacia fptA gene able to restore the sensitivity of the resistant fptA mutant P. aeruginosa strain.

Sulfur and strontium isotope composition of the Llobregat River (NE Spain): Tracers of natural and anthropogenic chemicals in stream waters

The use of sulfur and strontium isotopes as tracers for the source/s of water contaminants have been applied to the water of the Llobregat River system (NE Spain). Surface water samples from June 1997 were collected from the Llobregat River and its main tributaries and creeks. The chemistry of most stream waters are controlled mainly by the weathering of Tertiary chemical sediments within the drainage basin. The largest variation in delta(34)S values were found in the small creeks with values ranging from -9.9 to 15parts per thousand, whilst in the main river channels values ranged from 6.3 to 12.4parts per thousand. The Sr-87/Sr-86 ratio for dissolved strontium ranged from 0.70795 for a non-polluted site to 0.70882 for a polluted one. Most of the waters with high NO3 and low Ca/Na ratio converge to the same Sr-87/Sr-86 value, pointing to dominant pollutant end member contribution or a mixing of pollutants with an isotopic composition around 0.7083-0.7085. Although the concentration of the natural inputs in the river for sulfate and strontium are high, as a result of the sulfate outcrops within the geology of the basin, their isotopic characteristics suggest that they can be used as a discriminating device in water pollution problems. However to establish the detailed characteristics of the isotopes as geochemical tools, specific high-resolution case studies are necessary in small areas, where the inputs are well known.