Differentiation of blue ballpoint pen by positive and negative mode LDI-MS

Usually, the differentiation of inks on questioned documents is carried out by optical methods and thin layer chromatography (TLC). Therefore, spectrometric methods were also proposed in forensic literature for the analysis of dyes. Between these techniques, laser desorption/ionization mass spectrometry (LDI-MS) has demonstrated a great versatility thanks to its sensitivity to blue ballpoint ink dyes and minimal sample destruction. Previous researches concentrated mostly on the LDI-MS positive mode and have shown that this analytical tool offers higher discrimination power than high performance TLC (HPTLC) for the differentiation of blue ballpoint inks. Although LDI-MS negative mode has already been applied in numerous forensic domains like the studies of works of art, automotive paints or rollerball pens, its potential for the discrimination of ballpoint pens was never studied before. The aim of the present paper is therefore to evaluate its potential for the discrimination of blue ballpoint inks. After optimization of the method, ink entries from 33 blue ballpoint pens were analyzed directly on paper in both positive and negative modes by LDI-MS. Several cationic and anionic ink components were identified in inks; therefore, pens were classified and compared according to their formulations. Results show that additional information provided by anionic dyes and pigments significantly increases the discrimination power of positive mode. In fact, it was demonstrated that classifications obtained by the two modes were, to some extent, complementary (i.e., inks with specific cationic dyes not necessarily contained the same anionic components).

Statistical evaluation of the reproducibility and the influence of paper on the analysis of black gel pen ink using laser desorption ionisation mass spectrometry

Laser desorption ionisation mass spectrometry (LDI-MS) has demonstrated to be an excellent analytical method for the forensic analysis of inks on a questioned document. The ink can be analysed directly on its substrate (paper) and hence offers a fast method of analysis as sample preparation is kept to a minimum and more importantly, damage to the document is minimised. LDI-MS has also previously been reported to provide a high power of discrimination in the statistical comparison of ink samples and has the potential to be introduced as part of routine ink analysis. This paper looks into the methodology further and evaluates statistically the reproducibility and the influence of paper on black gel pen ink LDI-MS spectra; by comparing spectra of three different black gel pen inks on three different paper substrates. Although generally minimal, the influences of sample homogeneity and paper type were found to be sample dependent. This should be taken into account to avoid the risk of false differentiation of black gel pen ink samples. Other statistical approaches such as principal component analysis (PCA) proved to be a good alternative to correlation coefficients for the comparison of whole mass spectra.

Statistical discrimination of black gel pen inks analysed by laser desorption/ionization mass spectrometry

Pearson correlation coefficients were applied for the objective comparison of 30 black gel pen inks analysed by laser desorption ionization mass spectrometry (LDI-MS). The mass spectra were obtained for ink lines directly on paper using positive and negative ion modes at several laser intensities. This methodology has the advantage of taking into account the reproducibility of the results as well as the variability between spectra of different pens. A differentiation threshold could thus be selected in order to avoid the risk of false differentiation. Combining results from positive and negative mode yielded a discriminating power up to 85%, which was better than the one obtained previously with other optical comparison methodologies. The technique also allowed discriminating between pens from the same brand.

A statistical methodology for the comparison of blue gel pen inks analyzed by laser desorption/ionization mass spectrometry

A statistical methodology for the objective comparison of LDI-MS mass spectra of blue gel pen inks was evaluated. Thirty-three blue gel pen inks previously studied by RAMAN were analyzed directly on the paper using both positive and negative mode. The obtained mass spectra were first compared using relative areas of selected peaks using the Pearson correlation coefficient and the Euclidean distance. Intra-variability among results from one ink and inter-variability between results from different inks were compared in order to choose a differentiation threshold minimizing the rate of false negative (i.e. avoiding false differentiation of the inks). This yielded a discriminating power of up to 77% for analysis made in the negative mode. The whole mass spectra were then compared using the same methodology, allowing for a better DP in the negative mode of 92% using the Pearson correlation on standardized data. The positive mode results generally yielded a lower differential power (DP) than the negative mode due to a higher intra-variability compared to the inter-variability in the mass spectra of the ink samples.

Examination of Heterogeneous Crossing Sequences Between Toner and Rollerball Pen Strokes by Digital Microscopy and 3-D Laser Profilometry

The determination of line crossing sequences between rollerball pens and laser printers presents difficulties that may not be overcome using traditional techniques. This research aimed to study the potential of digital microscopy and 3-D laser profilometry to determine line crossing sequences between a toner and an aqueous ink line. Different paper types, rollerball pens, and writing pressure were tested. Correct opinions of the sequence were given for all case scenarios, using both techniques. When the toner was printed before the ink, a light reflection was observed in all crossing specimens, while this was never observed in the other sequence types. The 3-D laser profilometry, more time-consuming, presented the main advantage of providing quantitative results. The findings confirm the potential of the 3-D laser profilometry and demonstrate the efficiency of digital microscopy as a new technique for determining the sequence of line crossings involving rollerball pen ink and toner. With the mass marketing of laser printers and the popularity of rollerball pens, the determination of line crossing sequences between such instruments is encountered by forensic document examiners. This type of crossing presents difficulties with optical microscopic line crossing techniques involving ballpoint pens or gel pens and toner (1-4). Indeed, the rollerball's aqueous ink penetrates through the toner and is absorbed by the fibers of the paper, leaving the examiner with the impression that the toner is above the ink even when it is not (5). Novotny and Westwood (3) investigated the possibility of determining aqueous ink and toner crossing sequences by microscopic observation of the intersection before and after toner removal. A major disadvantage of their study resides in destruction of the sample by scraping off the toner line to see what was underneath. The aim of this research was to investigate the ways to overcome these difficulties through digital microscopy and three-dimensional (3-D) laser profilometry. The former was used as a technique for the determination of sequences between gel pen and toner printing strokes, but provided less conclusive results than that of an optical stereomicroscope (4). 3-D laser profilometry, which allows one to observe and measure the topography of a surface, has been the subject of a number of recent studies in this area. Berx and De Kinder (6) and Schirripa Spagnolo (7,8) have tested the application of laser profilometry to determine the sequence of intersections of several lines. The results obtained in these studies overcome disadvantages of other methods applied in this area, such as scanning electron microscope or the atomic force microscope. The main advantages of 3-D laser profilometry include the ease of implementation of the technique and its nondestructive nature, which does not require sample preparation (8-10). Moreover, the technique is reproducible and presents a high degree of freedom in the vertical axes (up to 1000 μm). However, when the paper surface presents a given roughness, if the pen impressions alter the paper with a depth similar to the roughness of medium, the results are not always conclusive (8). It becomes difficult in this case to distinguish which characteristics can be imputed to the pen impressions or the quality of the paper surface. This important limitation is assessed by testing different types of paper of variable quality (of different grammage and finishing) and the writing pressure. The authors will therefore assess the limits of 3-D laser profilometry technique and determine whether the method can overcome such constraints. Second, the authors will investigate the use of digital microscopy because it presents a number of advantages: it is efficient, user-friendly, and provides an objective evaluation and interpretation.

Differentiation of blue ballpoint pen inks by positive and negative mode LDI-MS

Usually, the differentiation of inks on questioned documents is carried out by optical methods and thin layer chromatography (TLC). Therefore, spectrometric methods were also proposed in forensic literature for the analysis of dyes. Between these techniques, laser desorption/ionization mass spectrometry (LDI-MS) has demonstrated a great versatility thanks to its sensitivity to blue ballpoint ink dyes and minimal sample destruction. Previous researches concentrated mostly on the LDI-MS positive mode and have shown that this analytical tool offers higher discrimination power than high performance TLC (HPTLC) for the differentiation of blue ballpoint inks. Although LDI-MS negative mode has already been applied in numerous forensic domains like the studies of works of art, automotive paints or rollerball pens, its potential for the discrimination of ballpoint pens was never studied before. The aim of the present paper is therefore to evaluate its potential for the discrimination of blue ballpoint inks. After optimization of the method, ink entries from 33 blue ballpoint pens were analyzed directly on paper in both positive and negative modes by LDI-MS. Several cationic and anionic ink components were identified in inks; therefore, pens were classified and compared according to their formulations. Results show that additional information provided by anionic dyes and pigments significantly increases the discrimination power of positive mode. In fact, it was demonstrated that classifications obtained by the two modes were, to some extent, complementary (i.e., inks with specific cationic dyes not necessarily contained the same anionic components).

Commentary on: Berger-Karin C, Hendricks U, Geyer-Lippmann J. Comparison of natural and artificial aging of ballpoint inks

We would like to comment this study recently published in JFS. It is a short technical note proposing an artificial aging technique for the dating of ballpoint pen inks. This is a very difficult and controversial topic, and we are worried about the nature of this paper. The authors propose several ideas to differentiate fast aging and slow aging inks, but their experimental data is not validly represented and/or discussed. The data is insufficient to draw any conclusions about any potential of the method for ink dating purposes. This lack of information on the subject must be filled before proposing such methods for practical caseworks. These are preliminary and unconvincing results from development research performed in a laboratory on controlled samples without due warnings about potential shortcomings. They cannot be used or even compared to results obtained in real situations on uncontrolled specimens of limited size, unknown composition and undefined storage conditions. This can leave an undeserved feeling that these methods are ready for implementation when the task of ensuring their scientific validity is still far away.

Statistical evaluation of the influence of writing postures on on-line signatures. Study of the impact of time.

The aim of this study is to investigate the influence of unusual writing positions on a person's signature, in comparison to a standard writing position. Ten writers were asked to sign their signature six times, in each of four different writing positions, including the standard one. In order to take into consideration the effect of the day-to-day variation, this same process was repeated over 12 sessions, giving a total of 288 signatures per subject. The signatures were collected simultaneously in an off-line and on-line acquisition mode, using an interactive tablet and a ballpoint pen. Unidimensional variables (height to width ratio; time with or without in air displacement) and time-dependent variables (pressure; X and Y coordinates; altitude and azimuth angles) were extracted from each signature. For the unidimensional variables, the position effect was assessed through ANOVA and Dunnett contrast tests. Concerning the time-dependent variables, the signatures were compared by using dynamic time warping, and the position effect was evaluated through classification by linear discriminant analysis. Both of these variables provided similar results: no general tendency regarding the position factor could be highlighted. The influence of the position factor varies according to the subject as well as the variable studied. The impact of the session factor was shown to cover the impact that could be ascribed to the writing position factor. Indeed, the day-to-day variation has a greater effect than the position factor on the studied signature variables. The results of this study suggest guidelines for best practice in the area of signature comparisons and demonstrate the importance of a signature collection procedure covering an adequate number of sampling sessions, with a sufficient number of samples per session.

Using group role-playing games with gifted children and adolescents: A psychosocial intervention model

Gifted children develop asynchronously, often advanced for their age cognitively, but at or between their chronological and mental ages socially and emotionally (Robinson, 2008). In order to help gifted children and adolescents develop and practice social and emotional self-regulation skills, we investigated the use of an Adlerian play therapy approach during pen-and-paper role-playing games. Additionally, we used Goffman's (1961, 1974) social role identification and distance to encourage participants to experiment with new identities. Herein, we propose a psychosocial model of interactions during role-playing games based on Goffman's theory and Adlerian play therapy techniques, and suggest that role-playing games are an effective way of intervening with gifted children and adolescents to improve their intra- and interpersonal skills. We specifically targeted intrapersonal skills of exercising creativity, becoming self-aware, and setting individual goals by raising participants' awareness of their privately logical reasons for making decisions and their levels of social interest. We also targeted their needs and means of seeking significance in the group to promote collaboration and interaction skills with other gifted peers through role analysis, embracement, and distancing. We report results from a case study and conclude that role-playing games deserve more attention, both from researchers and clinical practitioners, because they encourage change while improving young clients' social and emotional development.

Effects of Different Postural Conditions on Handwriting Variability

During their career, forensic document examiners will inevitably be confronted with handwriting carried out under unusual conditions (UnC). A questioned document signed on top of a car or on a vertical surface like a wall are two examples. These atypical circumstances may give rise to more variability of the signatures or written words, in particular if the body was in non-traditional writing position without the traditional support. Few studies were devoted to handwriting variability under unusual writing conditions. The current study investigates whether individual variability changes with special writing conditions. In a previous study (Sciacca & al, 2009), we found that eight repetitions were sufficient to obtain a correct estimation of the variance. In the present study, twelve subjects were asked to write two word sets eight times in upper and eight times in lower case, under different conditions : sitting and writing on a horizontal (usual condition UC) or vertical support; and standing, kneeling or laying while writing on a horizontal or vertical support (unusual conditions UnC). Words were written on a pen tablet, normalized in space and time and then averaged. The variance of the eight words was measured under all conditions. Results showed only an increase in variability under the laying and kneeling / vertical UnC. Within the five other postural conditions tested, handwriting was shown to be very stable.

Roles of PPARβ and PPARγ in mouse placental development

RESUME Les gènes des PPARs jouent des rôles importants dans la régulation du métabolisme énergétique, lipidique et glucidique. Le présent travail, caractérise et analyse les défauts placentaires responsables de la mort embryonnaire des souris mutantes pour PPARβ et pour PPARγ, entre le jour E9.5 et E10.5. Les placentas issus d'embryons PPARP présentent un sévère retard de croissance, alors que les placentas mutants PPARγ montrent de graves défauts vasculaires. Nous montrons que les placentas issus d'embryons PPARβ-/-, au jour E9.5 présentent une réduction prononcée de la couche de cellules géantes, associée à une diminution des niveaux de protéines exprimées par les cellules géantes, tel que le placenta lactogène-I et la « proliferin ». Par ailleurs, nous montrons que le traitement d'un lignée trophoblastique par un ligand spécifique de PPARP augmente considérablement leur différentiation en cellules géantes. Cette différentiation dépendante de la voie de signalisation P13-kinase, s'accompagne d'une élévation de l'expression de l'ADRP, une protéine de structure associée aux vésicules lipidiques. Ainsi nous démontrons que PPAR5 est un régulateur majeur de la différentiation des cellules géantes, lesquelles sont primordiales aussi bien pour l'établissement de la structure placentaire, que pour la fonction endocrine. Par contre, les placentas PPARγ-/- présentent un défaut de vascularisation. Le niveau d'une protéine anti-angiogénique, la « proliferin-related protein », est très basse et ne peut pas contre-balancer l'élévation normale de la protéine pro-angiogénique « proliferin ». La formation des vaisseaux se trouve alors altérée. Ainsi, PPARγ constitue un régulateur majeur de l'activité anti-angiogénique. En conclusion, ce travail fournit de nouveaux éléments sur le rôle complémentaires de PPARβet PPARγ dans les événements complexes qui régissent le développement placentaire. SUMMARY Peroxisome proliferator-activated receptors (PPARs) are nuclear hormone receptors involved in energy homeostasis and growth. Herein, we characterize the placental defects that cause embryonic lethality around E9.5/E10.5 in PPARβ- and in PPARγ-deficient mouse lines. Most but not all PPARβ-null mutants die around E9.5/E10.5 with severe growth retardation. The placentas from PPARβ-/- embryos at E9.5 exhibit a strongly reduced giant cell layer, associated with reduced levels of proteins expressed by giant cells such as Placental lactogen-I and Proliferin. Ectopic treatment of a rat trophoblast cell line with PPARβ ligand markedly accelerated PI3 kinase-dependent giant cell differentiation. In addition, we demonstrate that ADRP, a pen-related lipid droplet-bound protein, is up-regulated by PPARβ in differentiated Rcho-1 cells. These results indicate that PPARβ is a crucial regulator of the differentiation secondary giant cells, which play a major role in the establishment of the placental structure as well as an important endocrine function. In contrast, the main alteration of the PPARγ-null placentas concerns the vasculogenesis. We show that in these placentas, the level of the anti-angiogenic proliferin-related protein is very low, and cannot balance the normal elevation of the pro-angiogenic proliferin expression, leading to the defective placental vessel formation. Consistently, the dramatic increase of PPARγ expression in late stage of gestation in wild-type mice is likely a major regulator of the anti-angiogenic activity, particularly important at the end of the pregnancy. This work emphasizes the important and complementary roles of PPARβ and PPARγ in mouse placental development and provides new tools for understanding the complex regulatory events that governs placental development and function. Understanding the function of PPARβ and PPARγ are of crucial interest with respect to human placental development and associated pathologies.

Pyochelin-mediated signalling in Pseudomonas aeruginosa

SUMMARY: Iron is an essential element for nearly all organisms but it is poorly available in most environments and not sufficient to support microbial growth. Bacteria have evolved a range of strategies to acquire this important metal, the most common of these being siderophore-mediated iron uptake. Siderophores are high-affinity iron chelators which are released to the extracellular environment where they complex iron and deliver it to the bacterial cell, via specific uptake systems. The Gram-negative bacterium Pseudomonas aeruginosa produces two siderophores, pyoverdine and pyochelin, which both contribute to the virulence of this opportunistic human pathogen. The genes responsible for pyochelin-mediated iron uptake are grouped in the P. aeruginosa chromosome. The pyochelin biosynthetic genes are organized in two divergent operons, pchDCBA and pchEFGHI, which flank the regulatory gene pchR. The fptA gene, encoding the ferric pyochelin outer membrane receptor, occurs immediately downstream of the pchEFGHI genes. The biosynthesis of the siderophore and its receptor is subjected to dual regulation enabling P. aeruginosa to respond not only to the intracellular iron level but also to the presence of the siderophore in the extracellular environment. Negative regulation is mediated by the widespread Fur protein which employs ferrous iron as a corepressor and binds to a consensus sequence in the promoter region of iron-regulated genes. Positive regulation occurs during iron starvation and requires the AraC-type transcriptional regulator PchR. This regulator, together with pyochelin, induces the expression of pyochelin biosynthesis and uptake genes via a mechanism which was partly unraveled during this thesis. A 32-bp conserved sequence element (PchR-box) was identified in promoter regions of pyochelin-controlled genes. The PchR-box in the pchR-pchDCBA intergenic region was found to be essential for the induction of the pchDCBA operon and for the repression of the divergently transcribed pchR gene. PchR was purified as a fusion with maltose-binding protein (MBP). Mobility shift assays demonstrated specific binding of MBP-PchR to the PchR-box in the presence, but not in the absence of pyochelin. PchR-box mutations which interfered with pyochelin-dependent regulation in vivo, also affected pyochelin-dependent PchR-box recognition in vitro. These results show that pyochelin is the intracellular effector required for PchR-mediated regulation. The fact that extracellular pyochelin triggers this regulation implies that the siderophore can enter the cytoplasm. This conclusion was corroborated by analysing the importance of known and putative pyochelin uptake genes for pyochelin-dependent gene regulation. The pyochelin receptor gene fptA is followed by three genes, fptB, fptC, and fptX, which were shown here to be co-transcribed with fPtA. While fPtX encodes an inner membrane pen-I-lease, the functions of FptB and FptC are currently unknown. FptA and FptX, which are both required for pyochelin-mediated iron uptake, were found to be also needed for pyochelin-dependent gene regulation. FptB and FptC however, were not required and their role, if any, in the uptake of the PchR effector pyochelin remains elusive. RESUME Le fer est un élément essentiel pour la quasi-totalité des organismes, mais dans la plupart des environnements, il est difficilement accessible et insuffisant à la croissance microbienne. Les bactéries ont développé de multiples stratégies pour acquérir ce précieux métal, la plus commune étant l'acquisition au moyen de sidérophores. Les sidérophores sont des petites molécules dotées d'une forte affinité pour le fer qui, une fois relâchées dans l'environnement extracellulaire, vont complexer le fer et le délivrer à la cellule bactérienne par l'intermédiaire de systèmes d'acquisition spécifiques. La bactérie Gram-négative Pseudomonas aeruginosa produit deux sidérophores, la pyoverdine et la pyochéline, qui contribuent également à la virulence de ce pathogène opportuniste. Les gènes impliqués dans l'acquisition du fer à l'aide de la pyochéline sont regroupés sur t. le chromosome de P. aeruginosa. Les gènes de biosynthèse de la pyochéline sont organisés en deux opérons divergents, pchDCBA et pchEFGHI, qui flanquent le gène régulateur pchR. Le gène fptA, codant pour le récepteur de la pyochéline dans la membrane externe, est situé immédiatement en aval des gènes pchEFGHL La biosynthèse du sidérophore et de son récepteur est soumise à une double régulation permettant à P. aeruginosa de réagir non seulement à la quantité de fer intracellulaire, mais également à la présence du sidérophore dans le milieu extracellulaire. La répression se fait par l'intermédiaire de la protéine Fur, qui nécessite le fer ferreux comme co-répresseur et se lie à une séquence consensus dans la région promotrice des gènes régulés par le fer. L'induction se produit lorsque le fer est limitant, et requiert PchR, un régulateur transcriptionnel de la famille AraC. En présence de pyochéline, ce régulateur induit l'expression des gènes de biosynthèse et du récepteur de la pyochéline par l'intermédiaire d'un mécanisme partiellement résolu dans ce travail. Une séquence conservée (PchR-box) a été identifiée dans la région promotrice des gènes régulés par la pyochéline. La PchR-box située dans la région intergénique pchR-pchDCBA s'est révélée être importante pour l'induction de l'opéron pchDCBA et la répression du gène divergent pchR. PchR a été purifiée en tant que protéine de fusion avec une protéine liant le maltose (MBP). Des expériences de gel retard ont démontré la liaison spécifique de la protéine MBP-PchR sur la PchR-box en présence, mais non en absence de pyochéline. Les mutations de la PchR-box qui ont affecté la régulation pyochéline-dépendante in vivo, ont également eu un effet sur la liaison de la protéine in vitro. Ces résultats démontrent que la pyochéline est l'effecteur intracellulaire nécessaire à la régulation par PchR. Le fait que la pyochéline extracellulaire soit capable d'activer cette régulation implique que le sidérophore entre dans le cytoplasme. Cette conclusion a été corroborée par l'évaluation du rôle des gènes connus ou putatifs de l'incorporation du fer via la pyochéline sur la régulation pyochéline-dépendente. Le gène fPtA, codant pour le récepteur de la pyochéline, est suivi de trois gènes, fptB,fptC, et fptX, co-transcrits avec,ffitA. Si sffitX code pour une perméase de la membrane interne, la fonction de FptB et FptC reste obscure. FptA et FptX, nécessaires à l'acquisition du fer par l'intermédiaire de la pyochéline, se sont également révélés être requis pour la régulation pyochéline-dépendante des gènes pchDCBA, pchEFGHI et fptABCX. FptB et FptC n'ont quant à eux vraisemblablement pas de rôle majeur à jouer, si ce n'est aucun, dans l'incorporation de la pyochéline.