Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load.

OBJECTIVES: (1) To evaluate the changes in surface roughness and gloss after simulated toothbrushing of 9 composite materials and 2 ceramic materials in relation to brushing time and load in vitro; (2) to assess the relationship between surface gloss and surface roughness. METHODS: Eight flat specimens of composite materials (microfilled: Adoro, Filtek Supreme, Heliomolar; microhybrid: Four Seasons, Tetric EvoCeram; hybrid: Compoglass F, Targis, Tetric Ceram; macrohybrid: Grandio), two ceramic materials (IPS d.SIGN and IPS Empress polished) were fabricated according to the manufacturer's instructions and optimally polished with up to 4000 grit SiC. The specimens were subjected to a toothbrushing (TB) simulation device (Willytec) with rotating movements, toothpaste slurry and at three different loads (100g/250g/350g). At hourly intervals from 1h to 10h TB, mean surface roughness Ra was measured with an optical sensor and the surface gloss (Gl) with a glossmeter. Statistical analysis was performed for log-transformed Ra data applying two-way ANOVA to evaluate the interaction between load and material and load and brushing time. RESULTS: There was a significant interaction between material and load as well as between load and brushing time (p<0.0001). The microhybrid and hybrid materials demonstrated more surface deterioration with higher loads, whereas with the microfilled resins Heliomolar and Adoro it was vice versa. For ceramic materials, no or little deterioration was observed over time and independent of the load. The ceramic materials and 3 of the composite materials (roughness) showed no further deterioration after 5h of toothbrushing. Mean surface gloss was the parameter which discriminated best between the materials, followed by mean surface roughness Ra. There was a strong correlation between surface gloss and surface roughness for all the materials except the ceramics. The evaluation of the deterioration curves of individual specimens revealed a more or less synchronous course suspecting hinting specific external conditions and not showing the true variability in relation to the tested material. SIGNIFICANCE: The surface roughness and gloss of dental materials changes with brushing time and load and thus results in different material rankings. Apart from Grandio, the hybrid composite resins were more prone to surface changes than microfilled composites. The deterioration potential of a composite material can be quickly assessed by measuring surface gloss. For this purpose, a brushing time of 10h (=72,000 strokes) is needed. In further comparative studies, specimens of different materials should be tested in one series to estimate the true variability.

Round robin test: wear of nine dental restorative materials in six different wear simulators - supplement to the round robin test of 2005.

OBJECTIVE: The purpose of the present study was to submit the same materials that were tested in the round robin wear test of 2002/2003 to the Alabama wear method. METHODS: Nine restorative materials, seven composites (belleGlass, Chromasit, Estenia, Heliomolar, SureFil, Targis, Tetric Ceram) an amalgam (Amalcap) and a ceramic (IPS Empress) have been submitted to the Alabama wear method for localized and generalized wear. The test centre did not know which brand they were testing. Both volumetric and vertical loss had been determined with an optical sensor. After completion of the wear test, the raw data were sent to IVOCLAR for further analysis. The statistical analysis of the data included logarithmic transformation of the data, the calculation of relative ranks of each material within each test centre, measures of agreement between methods, the discrimination power and coefficient of variation of each method as well as measures of the consistency and global performance for each material. RESULTS: Relative ranks of the materials varied tremendously between the test centres. When all materials were taken into account and the test methods compared with each other, only ACTA agreed reasonably well with two other methods, i.e. OHSU and ZURICH. On the other hand, MUNICH did not agree with the other methods at all. The ZURICH method showed the lowest discrimination power, ACTA, IVOCLAR and ALABAMA localized the highest. Material-wise, the best global performance was achieved by the leucite reinforced ceramic material Empress, which was clearly ahead of belleGlass, SureFil and Estenia. In contrast, Heliomolar, Tetric Ceram and especially Chromasit demonstrated a poor global performance. The best consistency was achieved by SureFil, Tetric Ceram and Chromasit, whereas the consistency of Amalcap and Heliomolar was poor. When comparing the laboratory data with clinical data, a significant agreement was found for the IVOCLAR and ALABAMA generalized wear method. SIGNIFICANCE: As the different wear simulator settings measure different wear mechanisms, it seems reasonable to combine at least two different wear settings to assess the wear resistance of a new material.

Molecular and physiological characterisation of lonotropic receptors in the sacculus in drosophila

Chemosensation is the detection of chemical signals in the environment that enable an animal to make informed decisions about food choice, mate preference or predator detection. Dissecting the molecular and neural mechanisms by which animals detect chemical cues is an important goal towards understanding how they interact with the environment. An attractive system to dissect the mechanisms of chemosensation is the olfactory system. One of the most-investigated olfactory systems is that of Drosophila melanogaster, a model organism that is amenable to a powerful combination of genetic and physiological analyses. Embedded within the antennal olfactory organ of Drosophila is an unusual sensory structure called the sacculus. The sacculus is comprised of three distinct chambers, each lined with several sensilla housing two to three neurons. Previous morphological, anatomical and surgical studies of sacculus neurons have implicated sacculus neurons in chemosensation, hygrosensation and/or thermosensation. While a subset of sacculus neurons have been physiologically characterised as temperature sensors, the role of this organ has remained largely mysterious, due to its inaccessibility to peripheral electrophysiological analysis. Recently a new family of olfactory receptors, the lonotropic Receptors (IRs), was identified. Five IRs are expressed in sacculus neurons providing the first selective molecular markers for these cells. In this thesis I describe the molecular, physiological and anatomical characterisation of these neurons. Genetic labelling of specific populations of sacculus neurons with anatomical (CD8:GFP) reporters has identified neurons in sacculus chambers I and II express IR40a+IR93a together with their co- receptor IR25a, while neurons in chamber III express IR64a with its co-receptor IR8a. Both these sets of neurons project to two distinct glomeruli in the antennal lobe; IR40a neurons project to the column and arm, IR64a neurons project to DC4 and DP1m. Through a live optical imaging screen I showed that these neurons are indeed olfactory and IR64a neurons recognise acidic ligands, while IR40a neurons recognise amine ligands. IR40a and IR64a neurons are in fact composed of anatomically and physiologically distinct subpopulations, strongly implying the existence of other factors that define their functional properties. My thesis identifies the sacculus as a specialised olfactory organ capable of detecting acids and bases, which are of widespread importance to insects. The data from my thesis along with data from other labs show the sacculus is composed of different populations of olfactory sensory neurons and thermosensory neurons. Comparative genomic analysis of sacculus IRs across insects reveals them to be among the most conserved of this receptor repertoire, suggesting that the sacculus represents an evolutionarily ancient insect olfactory acid-base sensor. - La détection des produits chimiques se trouvant dans l'environnement (perception chimiosensorielle) permet à un animal de choisir sa nourriture, son partenaire ou encore d'identifier ses prédateurs. Décortiquer les mécanismes moléculaires et neuronaux grâce auxquels les animaux détectent ces signaux chimiques permet de comprendre comment ces animaux interagissent avec leur environnement. Un système intéressant pour décortiquer ces mécanismes de perception chimiosensorielle est le système olfactif, de la drosophile (Drosophila melanogaster), aussi appelée mouche du vinaigre. C'est un animal modèle très utile grâce à la combinaison d'outils génétiques puissants et d'analyses physiologiques facilement réalisables. Dans l'antenne de la drosophile, qui est l'organe olfactif principal de cet animal, se trouve une structure appelée sacculus. Celui-ci est composé de trois chambres distinctes, chacune comprenant plusieurs sensilles à l'intérieur desquelles se trouvent deux à trois neurones. De précédentes études morphologiques et anatomiques des ces neurones ont déterminé qu'ils sont impliqués dans la perception des odeurs, de l'humidité et de la température. Malgré ceci, la fonction principale de cet organe reste largement inconnue, principalement car il est inaccessible aux analyses électrophysiologiques. Récemment, une nouvelle famille de soixante-six récepteurs olfactifs, nommés Récepteurs lonotropiques (IRs), a été découverte chez la drosophile. Cinq IRs sont exprimés dans les neurones du sacculus. Pour la première fois, une sélection de marqueurs moléculaires est disponible pour l'étude de ces cellules. Dans cette thèse, les caractéristiques moléculaires, physiologiques et anatomiques des neurones du sacculus sont décrites. Ces populations de neurones situés dans le sacculus ont été marquées avec des gènes rapporteurs (CD8:GFP). Ceci a montré que les récepteurs IR40a et IR93a sont exprimés ensemble avec le co-récepteur IR25a dans les chambres I et II, tandis que les neurones de la chambre III expriment IR64a avec son co-récepteur IR8a. Ces deux groupes de neurones projettent vers deux glomérules distincts du lobe antennaire : les neurones IR40a projettent vers la column et le arm, alors que les neurones IR64a projettent vers DC4 et DP1m. Un screen d'imagerie optique a démontré que ces neurones sont en effet des neurones olfactifs, et que les neurones IR64a reconnaissent des ligands acides, tandis que les neurones IR40a reconnaissent des ligands aminés. De plus, les neurones IR40a et IR64a sont séparés en sous-populations distinctes anatomiquement et physiologiquement, et d'autres facteurs permettant de définir leurs propriétés fonctionnelles sont probablement impliqués. Cette thèse identifie ainsi le sacculus comme un organe olfactif spécialisé capable de détecter des acides et amines, lesquels sont très importants pour les insectes. Toutes les données collectées durant cette thèse, combinées aux données d'autres laboratoires, montrent que le sacculus est composé de différentes populations de neurones olfactifs et thermosenseurs. Ces IRs sont très conservés parmi les insectes, suggérant que le sacculus représente révolution d'un ancien détecteur olfactif d'acides et de bases chez l'insecte. - Tous les animaux sont capables de percevoir les signaux chimiques dans leur environnement, comme les odeurs ou le goût, via différents organes. L'odorat est le sens qui permet de percevoir les odeurs, et il est implique des neurones olfactifs qui se trouvent dans le nez des mammifères ou les antennes des insectes. La capacité d'un neurone olfactif à détecter une molécule odorante dépend des types de récepteurs olfactifs qu'il exprime. Il existe deux grandes familles de récepteurs qui perçoivent les odeurs : les Récepteurs Olfactifs, ORs, et Récepteurs lonotropiques IRs, qui détectent différents types d'odeurs avec différents mécanismes. Lorsqu'un récepteur reconnaît une molécule odorante, il convertit ce signal en un signal électrique qui est ensuite transmis au centre olfactif dans le cerveau. La drosophile (Drosophila melanogaster), aussi appelée mouche du vinaigre, est utilisée comme animal modèle pour étudier l'odorat, parce que son génome entier a été séquencé et que ses gènes sont facilement manipulables. De plus, l'anatomie du système olfactif de la mouche est similaire à celui des mammifères, malgré qu'il possède moins de neurones, ce qui le rend moins complexe. Ma thèse a pour objectif d'étudier les Récepteurs lonotropiques dans un organe spécifique, appelé le sacculus, situé dans les antennes. Les neurones du sacculus exprimant des IRs envoient leurs projections au centre olfactif du cerveau, suggérant que ces neurones perçoivent les odeurs. Une technique d'imagerie optique a été utilisée sur le cerveau de mouches vivantes afin de mesurer la réponse des neurones du le sacculus à différentes odeurs. J'ai démontré que ces récepteurs détectent des acides et des amines, qui sont très importants pour les insectes. Par exemple, les acides se retrouvent dans les fruits mûrs sur lesquels les mouches vont se nourrir, s'accoupler et poser leurs oeufs, et les amines sont souvent produites par des bactéries pouvant être nuisible pour la mouche. La principale découverte de ma thèse est donc l'identification du sacculus comme un organe capable de détecter deux des principales odeurs importantes pour la mouche. Ces récepteurs sont aussi présents dans d'autres insectes où ils jouent peut-être des rôles différents. Les acides et les amines se retrouvent aussi dans les excrétions (comme la sueur ou l'urine) de beaucoup de mammifères, qui pourraient potentiellement être dangereux pour la mouche, mais qui attirent les moustiques se nourrissant de leur sang.

Risk Evaluation for Spoofing against a Sensor Supplied with Liveness Detection

The aim of this paper is to evaluate the risks associated with the use of fake fingerprints on a livescan supplied with a method of liveness detection. The method is based on optical properties of the skin. The sensor uses several polarizations and illuminations to capture the information of the different layers of the human skin. These experiments also allow for the determination under which conditions the system is deceived and if there is an influence respectively of the nature of the fake, the mould used for the production or the individuals involved in the attack. These experiments showed that current multispectral sensors can be deceived by the use of fake fingerprints created with or without the cooperation of the subject. Fakes created from direct casts perform better than those produced by fakes created from indirect casts. The results showed that the success of the attack is influenced by two main factors. The first is the quality of the fakes, and by extension the quality of the original fingerprint. The second is the combination of the general patterns involved in the attacks since an appropriate combination can strongly increase the rates of successful attacks.

Measurement of the dynamics in ski jumping using a wearable inertial sensor-based system.

Abstract Dynamics is a central aspect of ski jumping, particularly during take-off and stable flight. Currently, measurement systems able to measure ski jumping dynamics (e.g. 3D cameras, force plates) are complex and only available in few research centres worldwide. This study proposes a method to determine dynamics using a wearable inertial sensor-based system which can be used routinely on any ski jumping hill. The system automatically calculates characteristic dynamic parameters during take-off (position and velocity of the centre of mass perpendicular to the table, force acting on the centre of mass perpendicular to the table and somersault angular velocity) and stable flight (total aerodynamic force). Furthermore, the acceleration of the ski perpendicular to the table was quantified to characterise the skis lift at take-off. The system was tested with two groups of 11 athletes with different jump distances. The force acting on the centre of mass, acceleration of the ski perpendicular to the table, somersault angular velocity and total aerodynamic force were different between groups and correlated with the jump distances. Furthermore, all dynamic parameters were within the range of prior studies based on stationary measurement systems, except for the centre of mass mean force which was slightly lower.

Hierarchical management of carbon sources is regulated similarly by the CbrA/B systems in Pseudomonas aeruginosa and Pseudomonas putida.

The CbrA/B system in pseudomonads is involved in the utilization of carbon sources and carbon catabolite repression (CCR) through the activation of the small RNAs crcZ in Pseudomonas aeruginosa, and crcZ and crcY in Pseudomonas putida. Interestingly, previous works reported that the CbrA/B system activity in P. aeruginosa PAO1 and P. putida KT2442 responded differently to the presence of different carbon sources, thus raising the question of the exact nature of the signal(s) detected by CbrA. Here, we demonstrated that the CbrA/B/CrcZ(Y) signal transduction pathway is similarly activated in the two Pseudomonas species. We show that the CbrA sensor kinase is fully interchangeable between the two species and, moreover, responds similarly to the presence of different carbon sources. In addition, a metabolomics analysis supported the hypothesis that CCR responds to the internal energy status of the cell, as the internal carbon/nitrogen ratio seems to determine CCR and non-CCR conditions. The strong difference found in the 2-oxoglutarate/glutamine ratio between CCR and non-CCR conditions points to the close relationship between carbon and nitrogen availability, or the relationship between the CbrA/B and NtrB/C systems, suggesting that both regulatory systems sense the same sort or interrelated signal.

Risk evaluation for spoofing against a sensor supplied with liveness detection

The aim of this paper is to evaluate the risks associated with the use of fake fingerprints on a livescan supplied with a method of liveness detection. The method is based on optical properties of the skin. The sensor uses several polarizations and illuminations to capture the information of the different layers of the human skin. These experiments also allow for the determination under which conditions the system is deceived and if there is an influence respectively of the nature of the fake, the mould used for the production or the individuals involved in the attack. These experiments showed that current multispectral sensors can be deceived by the use of fake fingerprints created with or without the cooperation of the subject. Fakes created from direct casts perform better than those produced by fakes created from indirect casts. The results showed that the success of the attack is influenced by two main factors. The first is the quality of the fakes, and by extension the quality of the original fingerprint. The second is the combination of the general patterns involved in the attacks since an appropriate combination can strongly increase the rates of successful attacks.

A comparison of the performance of modern screen-film and digital mammography systems.

This work compares the detector performance and image quality of the new Kodak Min-R EV mammography screen-film system with the Fuji CR Profect detector and with other current mammography screen-film systems from Agfa, Fuji and Kodak. Basic image quality parameters (MTF, NPS, NEQ and DQE) were evaluated for a 28 kV Mo/Mo (HVL = 0.646 mm Al) beam using different mAs exposure settings. Compared with other screen-film systems, the new Kodak Min-R EV detector has the highest contrast and a low intrinsic noise level, giving better NEQ and DQE results, especially at high optical density. Thus, the properties of the new mammography film approach those of a fine mammography detector, especially at low frequency range. Screen-film systems provide the best resolution. The presampling MTF of the digital detector has a value of 15% at the Nyquist frequency and, due to the spread size of the laser beam, the use of a smaller pixel size would not permit a significant improvement of the detector resolution. The dual collection reading technology increases significantly the low frequency DQE of the Fuji CR system that can at present compete with the most efficient mammography screen-film systems.

Heated Optical Fiber for Distributed Soil-Moisture Measurements: A Lysimeter Experiment

An Actively Heated Fiber Optics (AHFO) method to estimate soil moisture is tested and the analysis technique improved on. The measurements were performed in a lysimeter uniformly packed with loam soil with variable water content profiles. In the first meter of the soil profi le, 30 m of fiber optic cable were installed in a 12 loops coil. The metal sheath armoring the fiber cable was used as an electrical resistance heater to generate a heat pulse, and the soil response was monitored with a Distributed Temperature Sensing (DTS) system. We study the cooling following three continuous heat pulses of 120 s at 36 W m(-1) by means of long-time approximation of radial heat conduction. The soil volumetric water contents were then inferred from the estimated thermal conductivities through a specifically calibrated model relating thermal conductivity and volumetric water content. To use the pre-asymptotic data we employed a time correction that allowed the volumetric water content to be estimated with a precision of 0.01-0.035 (m(3) m(-3)). A comparison of the AHFO measurements with soil-moisture measurements obtained with calibrated capacitance-based probes gave good agreement for wetter soils [discrepancy between the two methods was less than 0.04 (m(3) m(-3))]. In the shallow drier soils, the AHFO method underestimated the volumetric water content due to the longertime required for the temperature increment to become asymptotic in less thermally conductive media [discrepancy between the two methods was larger than 0.1 (m(3) m(-3))]. The present work suggests that future applications of the AHFO method should include longer heat pulses, that longer heating and cooling events are analyzed, and, temperature increments ideally be measured with higher frequency.