Research and development, where people are exposed to nanomaterials

OBJECTIVES: Many nanomaterials (materials with structures smaller than 100 nm) have chemical, physical and bioactive characteristics of interest for novel applications. Considerable research efforts have been launched in this field. This study aimed to study exposure scenarios commonly encountered in research settings. METHODS: We studied one of the leading Swiss universities and first identified all research units dealing with nanomaterials. After a preliminary evaluation of quantities and process types used, a detailed analysis was conducted in units where more than a few micrograms were used per week. RESULTS: In the investigated laboratories, background levels were usually low and in the range of a few thousand particles per cubic centimeter. Powder applications resulted in concentrations of 10,000 to 100,000 particles/cm(3) when measured inside fume hoods, but there were no or mostly minimal increases in the breathing zone of researchers. Mostly low exposures were observed for activities involving liquid applications. However, centrifugation and lyophilization of nanoparticle-containing solutions resulted in high particle number levels (up to 300,000 particles/cm(3)) in work spaces where researchers did not always wear respiratory protection. No significant increases were found for processes involving nanoparticles bound to surfaces, nor were they found in laboratories that were visualizing properties and structure of small amounts of nanomaterials. CONCLUSIONS: Research activities in modern laboratories equipped with control techniques were associated with minimal releases of nanomaterials into the working space. However, the focus should not only be on processes involving nanopowders but should also be on processes involving nanoparticle-containing liquids, especially if the work involves physical agitation, aerosolization or drying of the liquids.

Transitions in social complexity along elevational gradients reveal a combined impact of season length and development time on social evolution.

Eusociality is taxonomically rare, yet associated with great ecological success. Surprisingly, studies of environmental conditions favouring eusociality are often contradictory. Harsh conditions associated with increasing altitude and latitude seem to favour increased sociality in bumblebees and ants, but the reverse pattern is found in halictid bees and polistine wasps. Here, we compare the life histories and distributions of populations of 176 species of Hymenoptera from the Swiss Alps. We show that differences in altitudinal distributions and development times among social forms can explain these contrasting patterns: highly social taxa develop more quickly than intermediate social taxa, and are thus able to complete the reproductive cycle in shorter seasons at higher elevations. This dual impact of altitude and development time on sociality illustrates that ecological constraints can elicit dynamic shifts in behaviour, and helps explain the complex distribution of sociality across ecological gradients.

Research priorities for nursing care of infants, children and adolescents: a West Australian Delphi study.

This paper describes a study that aimed to identify research priorities for the care of infants, children and adolescents at the sole tertiary referral hospital for children in Western Australia. The secondary aim was to stimulate nurses to explore clinical problems that would require further inquiry. Background. Planning for research is an essential stage of research development; involving clinicians in this exercise is likely to foster research partnerships that are pertinent to clinical practice. Nursing research priorities for the paediatric population have not previously been reported in Australia. Design. Delphi study. Method. Over 12 months in 2005-2006, a three-round questionnaire, using the Delphi technique, was sent to a randomly selected sample of registered nurses. This method was used to identify and prioritise nursing research topics relevant to the patient and the family. Content analysis was used to analyse Round I data and descriptive statistics for Round II and III data. Results. In Round I, 280 statements were identified and reduced to 37 research priorities. Analysis of data in subsequent rounds identified the top two priority research areas as (1) identification of strategies to reduce medication incidents (Mean = 6 center dot 47; SD 0 center dot 88) and (2) improvement in pain assessment and management (Mean = 6; SD 1 center dot 38). Additional comments indicated few nurses access the scientific literature or use research findings because of a lack of time or electronic access. Conclusions. Thirty-seven research priorities were identified. The identification of research priorities by nurses provided research direction for the health service and potentially other similar health institutions for children and adolescents in Australia and internationally. Relevance to clinical practice. The nurse participants showed concern about the safety of care and the well-being of children and their families. This study also enabled the identification of potential collaborative research and development of pain management improvement initiatives.

Strategies for the development of tdm for targeted anticancer agents

Most of the novel targeted anticancer agents share classical characteristics that define drugs as candidates for blood concentration monitoring: long-term therapy; high interindividual but restricted intraindividual variability; significant drug-drug and drug- food interactions; correlations between concentration and efficacy/ toxicity with rather narrow therapeutic index; reversibility of effects; and absence of early markers of response. Surprisingly though, therapeutic concentration monitoring has received little attention for these drugs despite reiterated suggestions from clinical pharmacologists. Several issues explain the lack of clinical research and development in this field: global tradition of empiricism regarding treatment monitoring, lack of formal conceptual framework, ethical difficulties in the elaboration of controlled clinical trials, disregard from both drug manufacturers and public funders, limited encouragement from regulatory authorities, and practical hurdles making dosage adjustment based on concentration monitoring a difficult task for prescribers. However, new technologies are soon to help us overcome these obstacles, with the advent of miniaturized measurement devices able to quantify circulating drug concentrations at the point-of-care, to evaluate their plausibility given actual dosage and sampling time, to determine their appropriateness with reference to therapeutic targets, and to advise on suitable dosage adjustment. Such evolutions could bring conceptual changes into the clinical development of drugs such as anticancer agents, while increasing the therapeutic impact of population PK-PD studies and systematic reviews. Research efforts in that direction from the clinical pharmacology community will be essential for patients to receive the greatest benefits and the least harm from new anticancer treatments. The example of imatinib, the first commercialized tyrosine kinase inhibitor, will be outlined to illustrate a potential research agenda for the rational development of therapeutic concentration monitoring.

Editorial research and the publication process in biomedicine and health: Report from the Esteve Foundation Discussion Group, December 2012.

Despite the fact that there are more than twenty thousand biomedical journals in the world, research into the work of editors and publication process in biomedical and health care journals is rare. In December 2012, the Esteve Foundation, a non-profit scientific institution that fosters progress in pharmacotherapy by means of scientific communication and discussion organized a discussion group of 7 editors and/or experts in peer review biomedical publishing. They presented findings of past editorial research, discussed the lack of competitive funding schemes and specialized journals for dissemination of editorial research, and reported on the great diversity of misconduct and conflict of interest policies, as well as adherence to reporting guidelines. Furthermore, they reported on the reluctance of editors to investigate allegations of misconduct or increase the level of data sharing in health research. In the end, they concluded that if editors are to remain gatekeepers of scientific knowledge they should reaffirm their focus on the integrity of the scientific record and completeness of the data they publish. Additionally, more research should be undertaken to understand why many journals are not adhering to editorial standards, and what obstacles editors face when engaging in editorial research.

Three essays on major trends in a slow clockspeed industry : the case of industrial automation

The motivation for this research initiated from the abrupt rise and fall of minicomputers which were initially used both for industrial automation and business applications due to their significantly lower cost than their predecessors, the mainframes. Later industrial automation developed its own vertically integrated hardware and software to address the application needs of uninterrupted operations, real-time control and resilience to harsh environmental conditions. This has led to the creation of an independent industry, namely industrial automation used in PLC, DCS, SCADA and robot control systems. This industry employs today over 200'000 people in a profitable slow clockspeed context in contrast to the two mainstream computing industries of information technology (IT) focused on business applications and telecommunications focused on communications networks and hand-held devices. Already in 1990s it was foreseen that IT and communication would merge into one Information and communication industry (ICT). The fundamental question of the thesis is: Could industrial automation leverage a common technology platform with the newly formed ICT industry? Computer systems dominated by complex instruction set computers (CISC) were challenged during 1990s with higher performance reduced instruction set computers (RISC). RISC started to evolve parallel to the constant advancement of Moore's law. These developments created the high performance and low energy consumption System-on-Chip architecture (SoC). Unlike to the CISC processors RISC processor architecture is a separate industry from the RISC chip manufacturing industry. It also has several hardware independent software platforms consisting of integrated operating system, development environment, user interface and application market which enables customers to have more choices due to hardware independent real time capable software applications. An architecture disruption merged and the smartphone and tablet market were formed with new rules and new key players in the ICT industry. Today there are more RISC computer systems running Linux (or other Unix variants) than any other computer system. The astonishing rise of SoC based technologies and related software platforms in smartphones created in unit terms the largest installed base ever seen in the history of computers and is now being further extended by tablets. An underlying additional element of this transition is the increasing role of open source technologies both in software and hardware. This has driven the microprocessor based personal computer industry with few dominating closed operating system platforms into a steep decline. A significant factor in this process has been the separation of processor architecture and processor chip production and operating systems and application development platforms merger into integrated software platforms with proprietary application markets. Furthermore the pay-by-click marketing has changed the way applications development is compensated: Three essays on major trends in a slow clockspeed industry: The case of industrial automation 2014 freeware, ad based or licensed - all at a lower price and used by a wider customer base than ever before. Moreover, the concept of software maintenance contract is very remote in the app world. However, as a slow clockspeed industry, industrial automation has remained intact during the disruptions based on SoC and related software platforms in the ICT industries. Industrial automation incumbents continue to supply systems based on vertically integrated systems consisting of proprietary software and proprietary mainly microprocessor based hardware. They enjoy admirable profitability levels on a very narrow customer base due to strong technology-enabled customer lock-in and customers' high risk leverage as their production is dependent on fault-free operation of the industrial automation systems. When will this balance of power be disrupted? The thesis suggests how industrial automation could join the mainstream ICT industry and create an information, communication and automation (ICAT) industry. Lately the Internet of Things (loT) and weightless networks, a new standard leveraging frequency channels earlier occupied by TV broadcasting, have gradually started to change the rigid world of Machine to Machine (M2M) interaction. It is foreseeable that enough momentum will be created that the industrial automation market will in due course face an architecture disruption empowered by these new trends. This thesis examines the current state of industrial automation subject to the competition between the incumbents firstly through a research on cost competitiveness efforts in captive outsourcing of engineering, research and development and secondly researching process re- engineering in the case of complex system global software support. Thirdly we investigate the industry actors', namely customers, incumbents and newcomers, views on the future direction of industrial automation and conclude with our assessments of the possible routes industrial automation could advance taking into account the looming rise of the Internet of Things (loT) and weightless networks. Industrial automation is an industry dominated by a handful of global players each of them focusing on maintaining their own proprietary solutions. The rise of de facto standards like IBM PC, Unix and Linux and SoC leveraged by IBM, Compaq, Dell, HP, ARM, Apple, Google, Samsung and others have created new markets of personal computers, smartphone and tablets and will eventually also impact industrial automation through game changing commoditization and related control point and business model changes. This trend will inevitably continue, but the transition to a commoditized industrial automation will not happen in the near future.

Simultaneous use of alcohol, tobacco and cannabis in relation to severity of substance dependence: a study among young Swiss men

Objective: This study investigated patterns of the simultaneous use of alcohol, tobacco and cannabis among young polydrug users, and whether use of one substance might be a cue for use of another and associations with the severity of substance dependence. Methods: The study focused on 3 subsamples from the ongoing Swiss Cohort Study on Substance Use Risk Factors (C-SURF, N=5,990). It used 12 months of data on alcohol/tobacco co-users, alcohol/cannabis co-users and tobacco/cannabis co-users (N=2,660, 1,755 and 1,460 respectively. Simultaneous use, numbers of symptoms of substance dependence, and hazardous use of alcohol, tobacco and cannabis were assessed. The effect of simultaneous polydrug use (SPU) on the numbers of symptoms of substance dependence was tested using analysis of variance. Results: Polydrug use was most common as SPU, and less common as non/occasional SPU. Moreover, when participants started to use one substance while using another, the severity of substance dependence was more strongly associated with the triggered substance than with cue. Conclusions: This study highlights the necessity to take SPU into account. First, SPU rather than separate drug use was the most common pattern for polydrug users. Second, frequent SPU was associated with increased numbers of symptoms of substance dependence compared to non/occasional SPU. Furthermore, SPU may reveal the severity of substance use dependence, when substance use is triggered by a cue substance. For these reasons, SPU should be a serious cause for concern for prevention and intervention purposes.