13

Pollution of air, water and soil by industrial chemicals presents a potential health risk to humans. Such chemicals can enter the human body by three routes, namely by inhalation, dermal absorption, and ingestion and in special cases by injection (needle sticks, bites, cuts, etc.). In the workplace, pulmonary and dermal absorption are the main routes of entry, but poor personal hygiene and work habits can result in ingestion that contributes to the dose. Air monitoring provides reliable information on inhalation exposure, and patches can be used to estimate dermal exposure. Local adverse effects, such as skin and eye irritation, or nose and lung irritation, are closely related to the external exposure. Systemic adverse effects, on the other hand, are related to the absorbed amount (dose), or to the level of the pollutant or its metabolite in the target organ. Human biological monitoring is becoming a powerful tool for scientists and policy makers to assess and manage the risk of exposure to chemicals both in the general population and at the workpalce. This chapter will focus on the occupational environment keeping in mind that biological monitoring in humans is a very actual issue in public health politics, in environmental medicine, and in science in general.

Effects of bioaerosol exposure on work-related symptoms among Swiss sawmill workers

Objective Exposure to bioaerosols in the occupational environment of sawmills could be associated with a wide range of health effects, in particular respiratory impairment, allergy and organic dust toxic syndrome. The objective of the study was to assess the frequency of medical respiratory and general symptoms and their relation to bioaerosol exposure. Method Twelve sawmills in the French part of Switzerland were investigated and the relationship between levels of bioaerosols (wood dust, airborne bacteria, airborne fungi and endotoxins), medical symptoms and impaired lung function was explored. A health questionnaire was distributed to 111 sawmill workers. Results The concentration of airborne fungi exceeded the limit recommended by the Swiss National Insurance (SUVA) in the twelve sawmills. This elevated fungi level significantly influenced the occurrence of bronchial syndrome (defined by cough and expectorations). No other health effects (irritations or respiratory effects) could be associated to the measured exposures. We observed that junior workers showed significantly more irritation syndrome (defined by itching/running nose, snoring and itching/red eyes) than senior workers. Lung function tests were not influenced by bioaerosol levels nor dust exposure levels. Conclusion Results suggest that occupational exposure to wood dust in a Swiss sawmill does not promote a clinically relevant decline in lung function. However, the occurrence of bronchial syndrome is strongly influenced by airborne fungi levels. [Authors]

Chances and risks of nanomaterials for health and environment

Nanomaterials have properties that are often very different from normal materials made of the same substance, which can be used to create novel products with exciting properties. However, the health and environmental impact of these nanomaterials is also changed and their potential risk needs to be studied. There is evidence that some nanomaterials can pass through tissue barriers (including the blood-brain barrier) and cell membranes. This is interesting for medical applications, but it raises concerns about the impact of non-medical nanomaterials. Current research aims at better coordinating research efforts and at better communication between researchers and involved stakeholders. Many research labs and production sites currently follow strategies that were established for dealing with very toxic chemicals and powders, until future research in this field helps identify the appropriate level of protection. All these efforts will ultimately ensure a safe, healthy and environmental friendly production, use and disposal of nanomaterials.

The effect of recalled previous work environment on return to work after a rehabilitation program including vocational aspects for trauma patients.

INTRODUCTION: The aim of the present study was to assess the association between remembered previous work place environment and return to work (RTW) after hospitalisation in a rehabilitation hospital. METHODS: A cohort of 291 orthopedic trauma patients discharged from hospital between 15 December 2004 and 31 December 2005 was included in a study addressing quality of life and work-related questions. Remembered previous work environment was measured by Karasek's 31-item Job Content Questionnaire (JCQ), given to the patients during hospitalisation. Post-hospitalisation work status was assessed 3 months, 1, and 2 years after discharge, using a questionnaire sent to the ex-patients. Logistic regression models were used to test the role of four JCQ variables on RTW at each time point while controlling for relevant confounders. RESULTS: Subjects perceiving a higher physical demand were less likely to return to work 1 year after hospital discharge. Social support at work was positively associated with RTW at all time points. A high job strain appeared to be positively associated with RTW 1 year after rehabilitation, with limitations due to large confidence intervals. CONCLUSIONS: Perceptions of previous work environment may influence the probability of RTW. In a rehabilitation setting, efforts should be made to assess those perceptions and, if needed, interventions to modify them should be applied.

Spare non-occupational HIV post-exposure prophylaxis by active contacting and testing of the source person.

OBJECTIVE: HIV-1 post-exposure prophylaxis (PEP) is frequently prescribed after exposure to source persons with an undetermined HIV serostatus. To reduce unnecessary use of PEP, we implemented a policy including active contacting of source persons and the availability of free, anonymous HIV testing ('PEP policy'). METHODS: All consultations for potential non-occupational HIV exposures i.e. outside the medical environment) were prospectively recorded. The impact of the PEP policy on PEP prescription and costs was analysed and modelled. RESULTS: Among 146 putative exposures, 47 involved a source person already known to be HIV positive and 23 had no indication for PEP. The remaining 76 exposures involved a source person of unknown HIV serostatus. Of 33 (43.4%) exposures for which the source person could be contacted and tested, PEP was avoided in 24 (72.7%), initiated and discontinued in seven (21.2%), and prescribed and completed in two (6.1%). In contrast, of 43 (56.6%) exposures for which the source person could not be tested, PEP was prescribed in 35 (81.4%), P < 0.001. Upon modelling, the PEP policy allowed a 31% reduction of cost for management of exposures to source persons of unknown HIV serostatus. The policy was cost-saving for HIV prevalence of up to 70% in the source population. The availability of all the source persons for testing would have reduced cost by 64%. CONCLUSION: In the management of non-occupational HIV exposures, active contacting and free, anonymous testing of source persons proved feasible. This policy resulted in a decrease in prescription of PEP, proved to be cost-saving, and presumably helped to avoid unnecessary toxicity and psychological stress.

Management of nanomaterials safety in research environment

Despite numerous discussions, workshops, reviews and reports about responsible development of nanotechnology, information describing health and environmental risk of engineered nanoparticles or nanomaterials is severely lacking and thus insufficient for completing rigorous risk assessment on their use. However, since preliminary scientific evaluations indicate that there are reasonable suspicions that activities involving nanomaterials might have damaging effects on human health; the precautionary principle must be applied. Public and private institutions as well as industries have the duty to adopt preventive and protective measures proportionate to the risk intensity and the desired level of protection. In this work, we present a practical, 'user-friendly' procedure for a university-wide safety and health management of nanomaterials, developed as a multi-stakeholder effort (government, accident insurance, researchers and experts for occupational safety and health). The process starts using a schematic decision tree that allows classifying the nano laboratory into three hazard classes similar to a control banding approach (from Nano 3 - highest hazard to Nano1 - lowest hazard). Classifying laboratories into risk classes would require considering actual or potential exposure to the nanomaterial as well as statistical data on health effects of exposure. Due to the fact that these data (as well as exposure limits for each individual material) are not available, risk classes could not be determined. For each hazard level we then provide a list of required risk mitigation measures (technical, organizational and personal). The target 'users' of this safety and health methodology are researchers and safety officers. They can rapidly access the precautionary hazard class of their activities and the corresponding adequate safety and health measures. We succeed in convincing scientist dealing with nano-activities that adequate safety measures and management are promoting innovation and discoveries by ensuring them a safe environment even in the case of very novel products. The proposed measures are not considered as constraints but as a support to their research. This methodology is being implemented at the Ecole Polytechnique de Lausanne in over 100 research labs dealing with nanomaterials. It is our opinion that it would be useful to other research and academia institutions as well. [Authors]

The efficacy of a protective cream in a real-world apprentice hairdresser environment.

The object of this study was to compare the protective action of a new barrier cream (Excipial Protect, Spirig Pharma AG, Egerkingen, Switzerland) to its vehicle in the context of hand irritation of apprentice hairdressers caused by repeated shampooing and exposure to hair-care products. This was a double-blind cross-over comparing Excipial Protect (containing aluminium chlorohydrate 5% as active ingredient) against its vehicle alone. The efficacy of the creams was evaluated taking into account: (1) clinical scores by researchers, (2) biometric measurements, (3) subjective opinions of the subjects. An analysis of variance was performed considering order of application, degree of atopy, and reported number of shampoos. We observed very little difference in efficacy between the protective cream and its vehicle. The presence, however, of aluminium chlorhydrate in the protective cream was shown to have a positive effect against work-related irritation. The cosmetic qualities of the creams seemed, to the participants, to be as important as their real protective and hydrating properties, an important factor in compliance issues.

Human leukocyte antigen class II variants and adult-onset asthma: does occupational allergen exposure play a role?

Recently, a locus centred on rs9273349 in the HLA-DQ region emerged from genome-wide association studies of adult-onset asthma. We aimed to further investigate the role of human leukocyte antigen (HLA) class II in adult-onset asthma and a possible interaction with occupational exposures. We imputed classical HLA-II alleles from 7579 single-nucleotide polymorphisms in 6025 subjects (1202 with adult-onset asthma) from European cohorts: ECRHS, SAPALDIA, EGEA and B58C, and from surveys of bakers and agricultural workers. Based on an asthma-specific job-exposure matrix, 2629 subjects had ever been exposed to high molecular weight (HMW) allergens. We explored associations between 23 common HLA-II alleles and adult-onset asthma, and tested for gene-environment interaction with occupational exposure to HMW allergens. Interaction was also tested for rs9273349. Marginal associations of classical HLA-II alleles and adult-onset asthma were not statistically significant. Interaction was detected between the DPB1*03:01 allele and exposure to HMW allergens (p = 0.009), in particular to latex (p = 0.01). In the unexposed group, the DPB1*03:01 allele was associated with adult-onset asthma (OR 0.67, 95%CI 0.53-0.86). HMW allergen exposures did not modify the association of rs9273349 with adult-onset asthma. Common classical HLA-II alleles were not marginally associated with adult-onset asthma. The association of latex exposure and adult-onset asthma may be modified by DPB1*03:01.