The European Board of Physical and Rehabilitation Medicine : the past, the present and the future [Europejska Rada Medycyny Fizykalnej i Rehabilitacji: przeszłość, teraźniejszość i perspektywy]

Right from the beginning of the development of the medical specialty of Physical and Rehabilitation Medicine (PRM) the harmonization of the fields of competence and the specialist training across Europe was always an important issue. The initially informal European collaboration was formalized in 1963 under the umbrella of the European Federation of PRM. The European Academy of PRM and the UEMS section of PRM started to contribute in 1969 and 1974 respectively. In 1991 the European Board of Physical and Rehabilitation Medicine (EBPRM) was founded with the specific task of harmonizing education and training in PRM in Europe. The EBPRM has progressively defined curricula for the teaching of medical students and for the postgraduate education and training of PRM specialists. It also created a harmonized European certification system for medical PRM specialists, PRM trainers and PRM training sites. European teaching initiatives for PRM trainees (European PRM Schools) were promoted and learning material for PRM trainees and PRM specialists (e-learning, books and e-books, etc.) was created. For the future the Board will have to ensure that a minimal specific undergraduate curriculum on PRM based on a detailed European catalogue of learning objectives will be taught in all medical schools in Europe as a basis for the general medical practice. To stimulate the harmonization of national curricula, the existing postgraduate curriculum will be expanded by a syllabus of competencies related to PRM and a catalogue of learning objectives to be reached by all European PRM trainees. The integration of the certifying examination of the PRM Board into the national assessment procedures for PRM specialists will also have to be promoted.

Harmonization of training and assessment of medical specialists in physical and rehabilitation medicine across Europe - The contribution of the UEMS Board of Physical and Rehabilitation Medicine

Background.- The main goals of the European Board of Physical and Rehabili-tation Medicine (EBPRM), founded in 1991 as the third speciality board of theUnion of European Medical Specialists (UEMS), are to harmonize pre-graduate,post-graduate and continuous medical education in physical and rehabilitationmedicine (PRM) all over Europe. The harmonization of curricula of the medi-cal specialities and the assessment of medical specialists has become one of thepriorities of the UEMS and its working groups to which the EBPRM contributes.Action.- The EBPRM will continue to promote a specific minimal undergraduatecurriculum on PRM including issues like disability, participation and handicapto be taught all over Europe as a basis for general medical practice. The EBPRMwill also expand the existing EBPRM postgraduate curriculum into a detailedcatalogue of learning objectives. This catalogue will serve as a tool to boostharmonization of the national curricula across Europe as well as to structurethe content of the MCQ examination. It would be a big step forward towardsharmonization of European PRM specialist training if an important number ofcountries would use the certifying MCQ examination of the Board as a part ofthe national assessments for PRM specialists.

Educational resources offered by the European Board of Physical and Rehabilitation Medicine (EBPRM)

Background .- Physical and Rehabilitation Medicine (PRM) is a very demanding medical speciality. To ensure high standard of research and care in PRM all across Europe, it is crucial to attract gifted trainees and offer them high quality education. At undergraduate level, many medical schools in Europe omit to offer teaching on disabled persons and on basic PRM knowledge. Thus PRM is hardly known to medical students. For postgraduate trainees access to evidence-based knowledge as well as teaching of research methodology specific to PRM, rehabilitation methodology, disability management and team building also need to be strengthened to increase the visibility of PRM. Action .- To address these issues the EBPRM proposes presently a specific undergraduate curriculum in PRM including the issues of disability, participation and handicap as a basis for general medical practice and postgraduate rehabilitation training. For PRM trainees many educational documents are now available on the EBPRM website. A growing number of educational sessions for PRM trainees take place during international and national PRM Congresses which can be accessed at low cost. Educational papers published regularly in European rehabilitation journals and European PRM Schools are offered free or at very low cost to trainees.

A new neuropsychological instrument measuring effects of age and drugs on fitness to drive: development, reliability, and validity of MedDrive

Background: Current guidelines underline the limitations of existing instruments to assess fitness to drive and the poor adaptability of batteries of neuropsychological tests in primary care settings. Aims: To provide a free, reliable, transparent computer based instrument capable of detecting effects of age or drugs on visual processing and cognitive functions. Methods: Relying on systematic reviews of neuropsychological tests and driving performances, we conceived four new computed tasks measuring: visual processing (Task1), movement attention shift (Task2), executive response, alerting and orientation gain (Task3), and spatial memory (Task4). We then planned five studies to test MedDrive's reliability and validity. Study-1 defined instructions and learning functions collecting data from 105 senior drivers attending an automobile club course. Study-2 assessed concurrent validity for detecting minor cognitive impairment (MCI) against useful field of view (UFOV) on 120 new senior drivers. Study-3 collected data from 200 healthy drivers aged 20-90 to model age related normal cognitive decline. Study-4 measured MedDrive's reliability having 21 healthy volunteers repeat tests five times. Study-5 tested MedDrive's responsiveness to alcohol in a randomised, double-blinded, placebo, crossover, dose-response validation trial including 20 young healthy volunteers. Results: Instructions were well understood and accepted by all senior drivers. Measures of visual processing (Task1) showed better performances than the UFOV in detecting MCI (ROC 0.770 vs. 0.620; p=0.048). MedDrive was capable of explaining 43.4% of changes occurring with natural cognitive decline. In young healthy drivers, learning effects became negligible from the third session onwards for all tasks except for dual tasking (ICC=0.769). All measures except alerting and orientation gain were affected by blood alcohol concentrations. Finally, MedDrive was able to explain 29.3% of potential causes of swerving on the driving simulator. Discussion and conclusions: MedDrive reveals improved performances compared to existing computed neuropsychological tasks. It shows promising results both for clinical and research purposes.

A new method for the determination of plutonium and americium using high pressure microwave digestion and alpha-spectrometry or ICP-SMS

Plutonium and americium are radionuclides particularly difficult to measure in environmental samples because they are alpha-emitters and therefore necessitate a careful separation before any measurement, either using radiometric methods or ICP-SMS. Recent developments in extraction chromatography resins such as Eichrom (R) TRU and TEVA have resolved many of the analytical problems but drawbacks such as low recovery and spectral interferences still occasionally occur. Here, we report on the use of the new Eichrom (R) DGA resin in association with TEVA resin and high pressure microwave acid leaching for the sequential determination of plutonium and americium in environmental samples. The method results in average recoveries of 83 +/- 15% for plutonium and 73 +/- 22% for americium (n = 60), and a less than 10% deviation from reference values of four IAEA reference materials and three samples from intercomparisons exercises. The method is also suitable for measuring Pu-239 in water samples at the mu Bq/l level, if ICP-SMS is used for the measurement.

Forensic science and the paradigm of quality

Due to various contexts and processes, forensic science communities may have different approaches, largely influenced by their criminal justice systems. However, forensic science practices share some common characteristics. One is the assurance of a high (scientific) quality within processes and practices. For most crime laboratory directors and forensic science associations, this issue is conditioned by the triangle of quality, which represents the current paradigm of quality assurance in the field. It consists of the implementation of standardization, certification, accreditation, and an evaluation process. It constitutes a clear and sound way to exchange data between laboratories and enables databasing due to standardized methods ensuring reliable and valid results; but it is also a means of defining minimum requirements for practitioners' skills for specific forensic science activities. The control of each of these aspects offers non-forensic science partners the assurance that the entire process has been mastered and is trustworthy. Most of the standards focus on the analysis stage and do not consider pre- and post-laboratory stages, namely, the work achieved at the investigation scene and the evaluation and interpretation of the results, intended for intelligence beneficiaries or for court. Such localized consideration prevents forensic practitioners from identifying where the problems really lie with regard to criminal justice systems. According to a performance-management approach, scientific quality should not be restricted to standardized procedures and controls in forensic science practice. Ensuring high quality also strongly depends on the way a forensic science culture is assimilated (into specific education training and workplaces) and in the way practitioners understand forensic science as a whole.

Forensic science culture

Heretofore the issue of quality in forensic science is approached through a quality management policy whose tenets are ruled by market forces. Despite some obvious advantages of standardization of methods allowing interlaboratory comparisons and implementation of databases, this approach suffers from a serious lack of consideration for forensic science as a science. A critical study of its principles and foundations, which constitutes its culture, enables to consider the matter of scientific quality through a new dimension. A better understanding of what pertains to forensic science ensures a better application and improves elementary actions within the investigative and intelligence processes as well as the judicial process. This leads to focus the attention on the core of the subject matter: the physical remnants of the criminal activity, namely, the traces that produce information in understanding this activity. Adapting practices to the detection and recognition of relevant traces relies on the apprehension of the processes underlying forensic science tenets (Locard, Kirk, relevancy issue) and a structured management of circumstantial information (directindirect information). This is influenced by forensic science education and training. However, the lack of homogeneity with regard to the scientific nature and culture of the discipline within forensic science practitioners and partners represents a real challenge. A sound and critical reconsideration of the forensic science practitioner's roles (investigator, evaluator, intelligence provider) and objectives (prevention, strategies, evidence provider) within the criminal justice system is a means to strengthen the understanding and the application of forensic science. Indeed, the whole philosophy is aimed at ensuring a high degree of excellence, namely, a dedicated scientific quality.

Mortality among 24,865 workers exposed to polychlorinated biphenyls (PCBs) in three electrical capacitor manufacturing plants: a ten-year update.

The objective of this analysis was to evaluate mortality among a cohort of 24,865 capacitor-manufacturing workers exposed to polychlorinated biphenyls (PCBs) at plants in Indiana, Massachusetts, and New York and followed for mortality through 2008. Cumulative PCB exposure was estimated using plant-specific job-exposure matrices. External comparisons to US and state-specific populations used standardized mortality ratios, adjusted for gender, race, age and calendar year. Among long-term workers employed 3 months or longer, within-cohort comparisons used standardized rate ratios and multivariable Poisson regression modeling. Through 2008, more than one million person-years at risk and 8749 deaths were accrued. Among long-term employees, all-cause and all-cancer mortality were not elevated; of the a priori outcomes assessed only melanoma mortality was elevated. Mortality was elevated for some outcomes of a priori interest among subgroups of long-term workers: all cancer, intestinal cancer and amyotrophic lateral sclerosis (women); melanoma (men); melanoma and brain and nervous system cancer (Indiana plant); and melanoma and multiple myeloma (New York plant). Standardized rates of stomach and uterine cancer and multiple myeloma mortality increased with estimated cumulative PCB exposure. Poisson regression modeling showed significant associations with estimated cumulative PCB exposure for prostate and stomach cancer mortality. For other outcomes of a priori interest--rectal, liver, ovarian, breast, and thyroid cancer, non-Hodgkin lymphoma, Alzheimer disease, and Parkinson disease--neither elevated mortality nor positive associations with PCB exposure were observed. Associations between estimated cumulative PCB exposure and stomach, uterine, and prostate cancer and myeloma mortality confirmed our previous positive findings.