Secondary effects of catalytic diesel particulate filters: copper-induced formation of PCDD/Fs.

Potential risks of a secondary formation of polychlorinated dibenzodioxins/furans (PCDD/Fs) were assessed for two cordierite-based, wall-through diesel particulate filters (DPFs) for which soot combustion was either catalyzed with an iron- or a copper-based fuel additive. A heavy duty diesel engine was used as test platform, applying the eight-stage ISO 8178/4 C1 cycle. DPF applications neither affected the engine performance, nor did they increase NO, NO2, CO, and CO2 emissions. The latter is a metric for fuel consumption. THC emissions decreased by about 40% when deploying DPFs. PCDD/F emissions, with a focus on tetra- to octachlorinated congeners, were compared under standard and worst case conditions (enhanced chlorine uptake). The iron-catalyzed DPF neither increased PCDD/F emissions, nor did it change the congener pattern, even when traces of chlorine became available. In case of copper, PCDD/F emissions increased by up to 3 orders of magnitude from 22 to 200 to 12 700 pg I-TEQ/L with fuels of < 2, 14, and 110 microg/g chlorine, respectively. Mainly lower chlorinated DD/Fs were formed. Based on these substantial effects on PCDD/F emissions, the copper-catalyzed DPF system was not approved for workplace applications, whereas the iron system fulfilled all the specifications of the Swiss procedures for DPF approval (VERT).

Comparative testing of a miniature diffusion size classifier to assess airborne ultrafine particles under field conditions

Miniature diffusion size classifiers (miniDiSC) are novel handheld devices to measure ultrafine particles (UFP). UFP have been linked to the development of cardiovascular and pulmonary diseases; thus, detection and quantification of these particles are important for evaluating their potential health hazards. As part of the UFP exposure assessments of highwaymaintenance workers in western Switzerland, we compared a miniDiSC with a portable condensation particle counter (P-TRAK). In addition, we performed stationary measurements with a miniDiSC and a scanning mobility particle sizer (SMPS) at a site immediately adjacent to a highway. Measurements with miniDiSC and P-TRAK correlated well (correlation of r = 0.84) but average particle numbers of the miniDiSC were 30%âeuro"60% higher. This difference was significantly increased for mean particle diameters below 40 nm. The correlation between theminiDiSC and the SMPSduring stationary measurements was very high (r = 0.98) although particle numbers from the miniDiSC were 30% lower. Differences between the three devices were attributed to the different cutoff diameters for detection. Correction for this size dependent effect led to very similar results across all counters.We did not observe any significant influence of other particle characteristics. Our results suggest that the miniDiSC provides accurate particle number concentrations and geometric mean diameters at traffic-influenced sites, making it a useful tool for personal exposure assessment in such settings.

The significant behavioral aspects of adopted children within successful adoption in Romania

The human behavior is giving the entire picture of a person. The behavior is based on a complex combination of personal innate factors, experience and education and the social network within which the individual is integrated. Each moment the complex individual factors face external and internal environmental aspects which in turn, generate proactive and retroactive reactions. The adoption process is an important and challenging social experiment, bringing to the adopted child a new affiliation, social network, experiences and educational standards. This comes in his/her life after the trauma of losing his biological affiliation and social and emotional support. Which are the significant characteristics of the adopted child's behavior? Which are the behavioral characteristics of the adoptive child that guarantee the success of the domestic adoptions in Romania? These are the questions we are going to answer here based on the research done within FISAN(6) project. The 32 children, 11-16 years old, adopted by Romanian families, during the early ages (0-4 years), were evaluated with complex evaluation tools for children and parents. The adoptive families participating in the research live in the Western counties of Romania.Successful adoption is defined as secure attachment of the adopted child. The conclusions emphasize the importance of: the pro-social behavior, the loving behavior showed to the parents, the assertive behavior, the differentiations between parents and people outside the family, and between the two parents, and the humor. These behaviors displayed by the adopted children are the ingredients of a successful integration within the adoptive family.

Solid phase microextraction as a short-term sampling technique for BTEX occupational exposure

Solid phase microextraction (SPME) has been widely used for many years in various applications, such as environmental and water samples, food and fragrance analysis, or biological fluids. The aim of this study was to suggest the SPME method as an alternative to conventional techniques used in the evaluation of worker exposure to benzene, toluene, ethylbenzene, and xylene (BTEX). Polymethylsiloxane-carboxen (PDMS/CAR) showed as the most effective stationary phase material for sorbing BTEX among other materials (polyacrylate, PDMS, PDMS/divinylbenzene, Carbowax/divinylbenzene). Various experimental conditions were studied to apply SPME to BTEX quantitation in field situations. The uptake rate of the selected fiber (75 microm PDMS/CAR) was determined for each analyte at various concentrations, relative humidities, and airflow velocities from static (calm air) to dynamic (> 200 cm/s) conditions. The SPME method also was compared with the National Institute of Occupational Safety and Health method 1501. Unlike the latter, the SPME approach fulfills the new requirement for the threshold limit value-short term exposure limit (TLV-STEL) of 2.5 ppm for benzene (8 mg/m(3))

Conceptual models for designing information systems supporting the strategic analysis of technology environments

1 6 STRUCTURE OF THIS THESIS -Chapter I presents the motivations of this dissertation by illustrating two gaps in the current body of knowledge that are worth filling, describes the research problem addressed by this thesis and presents the research methodology used to achieve this goal. -Chapter 2 shows a review of the existing literature showing that environment analysis is a vital strategic task, that it shall be supported by adapted information systems, and that there is thus a need for developing a conceptual model of the environment that provides a reference framework for better integrating the various existing methods and a more formal definition of the various aspect to support the development of suitable tools. -Chapter 3 proposes a conceptual model that specifies the various enviromnental aspects that are relevant for strategic decision making, how they relate to each other, and ,defines them in a more formal way that is more suited for information systems development. -Chapter 4 is dedicated to the evaluation of the proposed model on the basis of its application to a concrete environment to evaluate its suitability to describe the current conditions and potential evolution of a real environment and get an idea of its usefulness. -Chapter 5 goes a step further by assembling a toolbox describing a set of methods that can be used to analyze the various environmental aspects put forward by the model and by providing more detailed specifications for a number of them to show how our model can be used to facilitate their implementation as software tools. -Chapter 6 describes a prototype of a strategic decision support tool that allow the analysis of some of the aspects of the environment that are not well supported by existing tools and namely to analyze the relationship between multiple actors and issues. The usefulness of this prototype is evaluated on the basis of its application to a concrete environment. -Chapter 7 finally concludes this thesis by making a summary of its various contributions and by proposing further interesting research directions.

Dialyse et écologie: est-il possible de faire mieux à l'avenir [Dialysis and ecology: can we do better in the future?].

Development of dialysis has saved the lives of many patients. However, haemodialysis and peritoneal dialysis are very demanding in resources such as water and electricity, and generate a large amount of waste. In this article, we will review the environmental aspects of dialysis. Different solutions will be discussed, such as recycling of water discharged during reverse osmosis, the integration of solar energy, recycling of waste plastics, and the use of other techniques such as sorbent dialysis. In a world where natural resources are precious and where global warming is a major problem, it is important that not only dialysis, but all branches of medicine become more attentive to ecology.

The modern holy shroud.

Testimonies disclosed that a 44-year-old pedestrian was struck head-on by a truck while she was roaming on the motorway; at the time of collision, the truck was travelling at a speed of about 90 km/h. In the second phase of the collision, the pedestrian was projected about 100 m before her body was run over by the truck and then by a car. The autopsy revealed extensive mutilations, making it impossible to verify the testimonies of witnesses to the collision as regards the pedestrian's position at the moment of the first impact. However, the reports produced by the technical expert and the forensic pathologist were able to confirm the testimonies, based on an impact zone on the front panel of the cab of the truck, where part of the pedestrian's face was reproduced like a "modern holy shroud".

Interdisciplinary research for the analysis and risk assesment : the case of the municipality of Uspantan Guatemala

Short description of the proposed presentation * lees than 100 words This paper describes the interdisciplinary work done in Uspantán, Guatemala, a city vulnerable to natural hazards. We investigated local responses to landslides that happened in 2007 and 2010 and had a strong impact on the local community. We show a complete example of a systemic approach that incorporates physical, social and environmental aspects in order to understand risks. The objective of this work is to present the combination of social and geological data (mapping), and describe the methodology used for identification and assessment of risk. The article discusses both the limitations and methodological challenges encountered when conducting interdisciplinary research. Describe why it is important to present this topic at the Global Platform in less than 50 words This work shows the benefits of addressing risk in an interdisciplinary perspective, in particular how integrating social sciences can help identify new phenomena and natural hazards and assess risk. It gives a practical example of how one can integrate data from different fields. What is innovative about this presentation? * The use of mapping to combine qualitative and quantitative data. By coupling approaches, we could associate a hazard map with qualitative data gathered by interviews with the population. This map is an important document for the authorities. Indeed, it allows them to be aware of the most dangerous zones, the affected families and the places where it is most urgent to intervene.

Circadian and circaseptan patterns of natality and perinatal mortality of infants with different birth weights

OBJECTIVE. Data on human natality, stillbirth and perinatal mortality from Switzerland (1979-1987), available in four birthweight categories, are reexamined to assess any about-weekly (circaseptan) and changes in about-daily (circadian) patterns in central Europe over a century and a halfDESIGN. Retrospective analyses on archived data.SETTING. Federal Office of Statistics for Switzerland.RESULTS. In addition to prominent circadians, weekly patterns are also documented.CONCLUSION. Exogenous variations, prominent in early extrauterine life, such as changes of scheduling in obstetrics, may contribute to circadian and cireaseptan natality patterns. Information on these patterns serves in the optimization of neonatal care. Partly endogenous, partly physical environmental aspects, at least of about-weekly patterns, remain to be elucidated in series consisting exclusively of spontaneous parturitions.