Plunging when drilling: effect of using blunt drill bits.

OBJECTIVE: : Plunging when drilling can be a detrimental factor in patient care. There is, although, a general lack of information regarding the surgeon's performance in this skill. The aim of this study was to determine the effect that using sharp or blunt instruments had on the drill bit's soft tissue penetration, using a simulator. MATERIALS AND METHODS: : Surgeons taking part in an International Trauma Course were invited to participate. Two groups were defined: experienced and inexperienced surgeons. Twelve holes were drilled in the following order: 3 holes with a sharp drill bit in normal bone (SNB), 3 holes with a sharp drill bit in osteoporotic bone (SOB), 3 holes with a blunt drill bit in normal bone, and 3 holes with a blunt drill bit in osteoporotic bone. Mean values and Student t tests were used for statistical analysis. RESULTS: : Thirty-seven surgeons participated, 20 experienced and 17 inexperienced surgeons. Mean plunging depths for SNB, SOB, blunt drill bit in normal bone, and blunt drill bit in osteoporotic bone were, respectively, 5.1, 5.4, 21.1, and 13.9 mm for experienced surgeons and 7.6, 7.7, 22, and 15.9 mm for inexperienced surgeons. Drilling with SNB and with SOB was statistically different, with inexperienced surgeons plunging 2.5 mm (P = 0.31) and 2.6 mm (P = 0.042) deeper, respectively. There was a difference (P < 0.001) between sharp and blunt drill bits in all drilling conditions for both the groups. CONCLUSIONS: : Our study showed a significant difference in plunging depth when sharp or bunt drill bit was being used. Surgeons, regardless of their experience level, penetrate over 20 mm in normal bone and over 10 mm in osteoporotic bone.

Gravity-driven slug motion in capillary tubes

The velocity of a liquid slug falling in a capillary tube is lower than predicted for Poiseuille flow due to presence of menisci, whose shapes are determined by the complex interplay of capillary, viscous, and gravitational forces. Due to the presence of menisci, a capillary pressure proportional to surface curvature acts on the slug and streamlines are bent close to the interface, resulting in enhanced viscous dissipation at the wedges. To determine the origin of drag-force increase relative to Poiseuille flow, we compute the force resultant acting on the slug by integrating Navier-Stokes equations over the liquid volume. Invoking relationships from differential geometry we demonstrate that the additional drag is due to viscous forces only and that no capillary drag of hydrodynamic origin exists (i.e., due to hydrodynamic deformation of the interface). Requiring that the force resultant is zero, we derive scaling laws for the steady velocity in the limit of small capillary numbers by estimating the leading order viscous dissipation in the different regions of the slug (i.e., the unperturbed Poiseuille-like bulk, the static menisci close to the tube axis and the dynamic regions close to the contact lines). Considering both partial and complete wetting, we find that the relationship between dimensionless velocity and weight is, in general, nonlinear. Whereas the relationship obtained for complete-wetting conditions is found in agreement with the experimental data of Bico and Quere [J. Bico and D. Quere, J. Colloid Interface Sci. 243, 262 (2001)], the scaling law under partial-wetting conditions is validated by numerical simulations performed with the Volume of Fluid method. The simulated steady velocities agree with the behavior predicted by the theoretical scaling laws in presence and in absence of static contact angle hysteresis. The numerical simulations suggest that wedge-flow dissipation alone cannot account for the entire additional drag and that the non-Poiseuille dissipation in the static menisci (not considered in previous studies) has to be considered for large contact angles.

FM127: Systemic metal ion levels in patients with modular neck total hip arthroplasties: a prospective cohort study

There is increasing evidence that modular neck stems are prone to corrosion-related complications. Recent studies showed elevated metal ions levels and occasional pseudotumor formation in patients with such implants. The purpose of this study was to compare systemic metal-ion levels in patients after primary THA with modular neck stems to those of patients after non-modular implants. To our knowledge, this is the first cohort study including a control group, THA without CoCr heads and dry-assembled neck-stem connections. Methods: 50 patients after THA at a minimum follow-up of 1 year have been selected for the study. Patients with multiple prosthesis or other implants have been deselected. All received a cementless SPS stem from Symbios (Ti6Al4V). 40 patients have the modular neck (CoCr) version and 10 a monobloc version. All bearings were either ceramic-ceramic or ceramic-polyethylene to minimize other sources of CoCr ion release. In the modular group, the neck was chosen pre-operatively based on a 3D planning, allowing for a dry assembly of the stem and neck on the back table before implantation. A plasma system coupled to mass spectrometry was used for a complete elementary quantification in blood and serum separately. Clinical outcome was measured using the Oxford Hip Score. Results : Complete data sets of 29 patients (24 in the modular neck-group (10male, mean age 63y, 35-84y) and 5 in the monobloc-group (3 male, 69 y, 51-83y) are available to date. Mean Co blood levels were .95 ug/L (.14-12.4) in the modular group vs .27 ug/L (.10-.73) in the monobloc group (p=.2). Respective values for Cr were significantly higher in the modular group (.99 g/L; range .75-1.21) compared to those in the monobloc group (.74 g/L ;.62-.86; p=.001). No significant difference was found when comparing serum levels. 5/24 patients had Co levels above 1 g/L (12/24 for Cr), which is by some considered as a relevant elevation. The maximum Co level was measured in an asymptomatic patient. The Oxford Hip Scores were similar in both groups. Conclusion: Cr levels were significantly elevated in the modular neck group compared to those in the monobloc group. 1/24 patients with a modular prosthesis exhibited Co levels, which are beyond the threshold accepted even for metal-on-metal bearing couples. These results have contributed to our decision to abandon the use of modular neck stems. Routine follow-up including annual measurements of systemic CoCr concentrations should be considered.

Silver-base metal epithermal vein and listwaenite types of deposit Crnac, Rogozna Mts., Kosovo. Part I: Ore mineral geochemistry and sulfur isotope study

Pb-Zn-Ag vein and listwaenite types of mineralization in Crnac deposit, Western Vardar zone, were deposited within several stages: (i) the pre-ore stage comprises pyrite, arsenopyrite, pyrrhotite, quartz, kaolinite and is followed by magnetite-pyrite; (ii) the syn-ore stage is composed of galena, sphalerite, tetrahedrite and stefanite; and (iii) the post-ore stage is composed of carbonates, pyrite, arsenopyrite and minor galena. The vein type mineralization is hosted by Jurassic amphibolites and veins terminate within overlying serpentinites. Mineralized listwaenites are developed along the serpentinite-amphibolite interface. The reserves are estimated to 1.7 Mt of ore containing in average 7.6% lead, 2.9% zinc, and 102 g/t silver. Sulfides from the pre- and syn-mineralization assemblage of the vein- and listwaenite-types of mineralization from the Crnac Pb-Zn-Ag deposit have been analyzed using microprobe, crush-leachates and sulfur isotopes. The pre-ore assemblage precipitated under high sulfur fugacities (f(S(2)) = 10(-8)-10(-6) bar) from temperatures ranging between 350 degrees C and 380 degrees C. Most likely water-rock reactions, boiling and/or increase of pH caused an increase of delta(34)S of pyrite toward upper levels within the deposit. The decomposition of pre-ore pyrrhotite to a pyrite-magnetite mixture occurred at a fugacity of sulfur from f(S(2)) = 8.7 x 10(-10) to 9.6 x 10(-9) bar and fugacity of oxygen from f(O(2)) = 2.4 x 10(-30) to 3.1 x 10(-28) bars, indicating a contribution of an oxidizing fluid, i.e. meteoric water during pre-ore stages of hydrothermal activity. The crystallization temperatures obtained by the sphalerite-galena isotope geothermometer range from 230 to 310 degrees C. The delta(34)S values of pre- and syn-ore sulfides (pyrite, galena, sphalerite, delta(34)S = 0.3-5.9 parts per thousand) point to magmatic sulfur. Values of delta(34)S of galena and sphalerite are decreasing upwards due to precipitation of early formed sulfide minerals. Post-ore assemblage precipitated at temperature below 190 degrees C. Based on data presented above, we assume two fluid sources: (i) a magmatic source, supported by sulfur isotopic compositions within pre- and syn-ore minerals and a high mol% of fluorine found within pre- and syn-ore leachates, and (ii) a meteoric source, deduced by coincident pyrite-magnetite intergrowth, sulfur isotopic trends within syn-ore minerals and decrease of crystallization temperatures from the pre-ore stage (380-350 degrees C), towards the syn-ore (310-215 degrees C) and post-ore stages (<190 degrees C). Post-ore fluids are Na-Ca-Mg-K-Li chlorine rich and were modified via water-rock reactions. Simple mineral assemblage and sphalerite composition range from 1.5 to 10.1 mol% of FeS catalog Crnac to a group of intermediate sulfidation epithermal deposit. (C) 2011 Elsevier B.V. All rights reserved.

Survival of zirconia- and metal-supported fixed dental prostheses: a systematic review

Purpose: The aim of this review was to systematically evaluate and compare the frequency of veneer chipping and core fracture of zirconia fixed dental prostheses (FOPS) and porcelain-fused-to-metal (PFM) FDPs and determine possible influencing factors. Materials and Methods: The SCOPUS database and International Association of Dental Research abstracts were searched for clinical studies involving zirconia and PFM FDPs. Furthermore, studies that were integrated into systematic reviews on PFM FDPs were also evaluated. The principle investigators of any clinical studies on zirconia FDPs were contacted to provide additional information. Based on the available information for each FOP, a data file was constructed. Veneer chipping was divided into three grades (grade 1 = polishing, grade 2 = repair, grade 3 = replacement). To assess the frequency of veneer chipping and possible influencing factors, a piecewise exponential model was used to adjust for a study effect. Results: None of the studies on PFM FDPs (reviews and additional searching) sufficiently satisfied the criteria of this review to be included. Thirteen clinical studies on zirconia FDPs and two studies that investigated both zirconia and PFM FDPs were identified. These studies involved 664 zirconia and 134 PFM FDPs at baseline. Follow-up data were available for 595 zirconia and 127 PFM FDPs. The mean observation period was approximately 3 years for both groups. The frequency of core fracture was less than 1% in the zirconia group and 0% in the PFM group. When all studies were included, 142 veneer chippings were recorded for zirconia FDPs (24%) and 43 for PFM FDPs (34%). However, the studies differed extensively with regard to veneer chipping of zirconia: 85% of all chippings occurred in 4 studies, and 43% of all chippings included zirconia FDPs. If only studies that evaluated both types of core materials were included, the frequency of chipping was 54% for the zirconia-supported FDPs and 34% for PFM FDPs. When adjusting the survival rate for the study effect, the difference between zirconia and PFM FDPs was statistically significant for all grades of chippings (P = .001), as well as for chipping grade 3 (P = .02). If all grades of veneer chippings were taken into account, the survival of PFM FDPs was 97%, while the survival rate of the zirconia FDPs was 90% after 3 years for a typical study. For both PFM and zirconia FDPs, the frequency of grades 1 and 2 veneer chippings was considerably higher than grade 3. Veneer chipping was significantly less frequent in pressed materials than in hand-layered materials, both for zirconia and PFM FDPs (P = .04). Conclusions: Since the frequency of veneer chipping was significantly higher in the zirconia FDPs than PFM FDPs, and as refined processing procedures have started to yield better results in the laboratory, new clinical studies with these new procedures must confirm whether the frequency of veneer chipping can be reduced to the level of PFM. Int J Prosthodont 2010;23:493-502

Mutagenesis and modelling of the alpha(1b)-adrenergic receptor highlight the role of the helix 3/helix 6 interface in receptor activation.

Computer simulations on a new model of the alpha1b-adrenergic receptor based on the crystal structure of rhodopsin have been combined with experimental mutagenesis to investigate the role of residues in the cytosolic half of helix 6 in receptor activation. Our results support the hypothesis that a salt bridge between the highly conserved arginine (R143(3.50)) of the E/DRY motif of helix 3 and a conserved glutamate (E289(6.30)) on helix 6 constrains the alpha1b-AR in the inactive state. In fact, mutations of E289(6.30) that weakened the R143(3.50)-E289(6.30) interaction constitutively activated the receptor. The functional effect of mutating other amino acids on helix 6 (F286(6.27), A292(6.33), L296(6.37), V299(6.40,) V300(6.41), and F303(6.44)) correlates with the extent of their interaction with helix 3 and in particular with R143(3.50) of the E/DRY sequence.

Trouble dissociatif: une clinique à l'interface de la neurologie et de la psychiatrie [Dissociative disorders: neurologists and psychiatrists working together]

Les troubles dissociatifs se présentent souvent par une clinique neurologique atypique impliquant une démarche diagnostique complexe à l'interface de la neurologie et de la psychiatrie. La restitution du diagnostic aux patients et leur prise en charge nécessitent une étroite collaboration interdisciplinaire. Les connaissances actuelles sont encore limitées, mais ce domaine est enrichi par des études récentes en neurosciences cliniques. Cet article présente les principaux aspects des troubles dissociatifs et formule un concept de prise en charge. Dissociative disorders often have an atypical neurological presentation requiring a complex diagnostic process at the interface between neurology and psychiatry. A strong interdisciplinary collaboration is needed for diagnosis restitution and patient treatment. Current knowledge is still scarce but recent studies in clinical neuroscience enrich this field. This article presents the main aspects of dissociative disorders and suggests a treatment framework

La consultation systémique: une interface entre recherche et clinique

Le but de la consultation systémique est l'évaluation des interactions familiales à des fins cliniques aussi bien qu'à des fins de recherche, avec mise en lumière des ressources aussi bien que des difficultés de la famille. Elle est soit demandée spontanément par les parents soit par le(s) thérapeute(s) qui sui(ven)t la famille. Lors d'une première rencontre, nous proposons d'une part à la famille de faire des jeux familiaux standardisés que nous filmons et d'autre part de poser les questions qui motivent les parents ou thérapeute(s) à nous consulter. Lors d'une deuxième rencontre, un visionnement des films avec la famille (et les thérapeutes) permet une discussion ainsi que l'élaboration de réponses aux questions posées. Après une description de la pratique de la consultation systémique, avec ses objectifs et ses principes, les situations utilisées dans ce contexte sont présentées (comme le Lausanne Trilogue Play). Enfin, une vignette clinique en illustre la richesse et l'utilité, aussi bien pour la recherche que pour la clinique. The aim of the systems consultation is to assess the family interaction in order to enlighten, in a clinical perspective, the resources as well as the difficulties of the family. The family itself or a therapist may request it. During the first session, we propose to the family, on the one hand, to play standardized games which are recorded and, on the other hand, to ask the questions they (or the therapist/s) may have. During the second session, a video feedback takes place to discuss and elaborate on the questions. After a description of the practice of the systems consultation, including aims and principles, the observational situations used in this context will be presented (e.g. the Lausanne Trilogue Play). Finally a case illustration will show its richness and usefulness for research as well as for clinical purposes, in particular as a bridge between research and clinical domains.

Molecular design of the Calphabeta interface favors specific pairing of introduced TCRalphabeta in human T cells.

A promising approach to adoptive transfer therapy of tumors is to reprogram autologous T lymphocytes by TCR gene transfer of defined Ag specificity. An obstacle, however, is the undesired pairing of introduced TCRalpha- and TCRbeta-chains with the endogenous TCR chains. These events vary depending on the individual endogenous TCR and they not only may reduce the levels of cell surface-introduced TCR but also may generate hybrid TCR with unknown Ag specificities. We show that such hybrid heterodimers can be generated even by the pairing of human and mouse TCRalpha- and TCRbeta-chains. To overcome this hurdle, we have identified a pair of amino acid residues in the crystal structure of a TCR that lie at the interface of associated TCR Calpha and Cbeta domains and are related to each other by both a complementary steric interaction analogous to a "knob-into-hole" configuration and the electrostatic environment. We mutated the two residues so as to invert the sense of this interaction analogous to a charged "hole-into-knob" configuration. We show that this inversion in the CalphaCbeta interface promotes selective assembly of the introduced TCR while preserving its specificity and avidity for Ag ligand. Noteworthily, this TCR modification was equally efficient on both a Mu and a Hu TCR. Our data suggest that this approach is generally applicable to TCR independently of their Ag specificity and affinity, subset distribution, and species of origin. Thus, this strategy may optimize TCR gene transfer to efficiently and safely reprogram random T cells into tumor-reactive T cells.

Enjeux éthiques des nouvelles technologies de la reproduction : une conception de la justice à l'interface de l'éthique du "care" et de l'approche des "capabilités"

L'émergence des nouvelles technologies de la reproduction (NTR) est allée de pair avec un certain nombre de discours. Un discours promettant d'une part une extension de la palette de choix reproductifs des individus, une extension de leur liberté et de leur autonomie reproductives, dont la forme la plus extrême peut se traduire par la formule : un enfant quand je veux et comme je veux. D'autre part, un discours annonçant une série de « catastrophes » à venir, telles que l'effondrement de l'institution de la famille et la modification de l'espèce humaine. En d'autres termes, une tension entre promesses et catastrophes qui place les sociétés contemporaines face à de nombreux défis sociaux, politiques et éthiques, notamment quant à la question de la régulation de la PMA (procréation médicalement assistée) : qui peut y avoir accès ? Quelles techniques doit-on autoriser ? Ou au contraire limiter ? Tant de questions auxquelles aucune réponse simple et évidente n'existe. La diversité des réponses législatives quant à ces questions illustre cette complexité. L'éthique peut, ici, jouer un rôle fondamental. Sans toutefois prétendre donner des réponses toutes faites et facilement applicables, elle offre un espace de réflexion, le privilège de prendre une certaine distance face à des enjeux contemporains. C'est dans cette perspective que nous avons ancré ce travail de recherche en questionnant les enjeux éthiques de la PMA à partir d'une perspective de justice. Toutefois, au sein des études en bioéthique, majoritairement issues de la tradition libérale, la tension énoncée précédemment mène la bioéthique à justifier un certain nombre d'inégalités plutôt que de veiller à les dépasser. Ainsi, une évaluation de la pratique de la PMA à partir d'une perspective de la justice, exige, au préalable, une réévaluation du concept même de justice. Ce faisant, par une articulation entre l'éthique du care de Joan Tronto et l'approche des capabilités de Martha Nussbaum qui placent la vulnérabilité au coeur de la personne, nous avons proposé une conception de la justice fondée sur une anthropologie de la vulnérabilité. Cette conception nous permet d'identifier, dans le cadre de la pratique de la PMA en Suisse et en partant de la loi sur la procréation assistée (LPMA), les constructions normatives qui mènent à la non-reconnaissance et, ce faisant, à la mise à l'écart, de certaines formes de vulnérabilité : une vulnérabilité générique et une vulnérabilité socio-économique. Traitant la question de la vulnérabilité générique principalement, nos analyses ont une incidence sur les conceptions de la famille, du bien de l'enfant, de la femme et de la nature, telles qu'elles sont actuellement véhiculées par une conception naturalisée de la PMA. Répondre aux vulnérabilités identifiées, en veillant à leur donner une place, signifie alors déplacer ces conceptions naturalisées, afin que les vulnérabilités soient intégrées aux pratiques sociales et que les exigences de justice soient ainsi remplies. - The emergence of assisted reproductive technologies (ART) came along with several discourses. On the one hand a discourse promising an extension of the individuals' reproductive choices, their procreative liberty and autonomy. On the other hand a discourse announced a series of disasters to come such as the collapse of the family institution and the modification of human kind. In other words, a growing tension appears between promises and disasters and contemporary societies are facing inevitable social, political and ethical challenges, in particular with regard to the issue of ART regulation: who has access? What procedures should be authorized? Which ones should be limited? These complex questions have no simple or obvious answers. The variety of legislative responses to these questions highlights complexity. Ethics can play a fundamental role, and without claiming to give simple answers, also offer a space for reflection as well as the privilege to distance itself with regard to contemporary issues. It is in this perspective that this study questions the ethical considerations of ART in a perspective of justice. However, in previous studies in bioethics mainly following a liberal tradition, previously mentioned tension has lead bioethics to justify some inequalities instead of trying to overcome them. As a consequence, evaluating practices of ART from a perspective of justice requires to first reevaluate the concept of justice itself. In doing so we offer a conception of justice founded on the anthropology of vulnerability. This conception draws on an articulation of the ethic of care of Joan Tronto and the capability approach of Martha Nussbaum, which places vulnerability at the center of the person. This conception allows us to identify, within the framework of ARTS in Switzerland and starting with the laws of medically assisted procreation (LPMA), some normative constructions. These constructions lead to the non-recognition and the disregard of some forms of vulnerability: a generic vulnerability as well as socio-economic counterpart. Focusing mainly on the issue of generic vulnerability, our analysis has implications for the conceptions of family, the best interests of the child, woman, and nature in the way they are defined in a naturalized conception of ART. Responding to such failures by taking into account these vulnerabilities thus means to move these conceptions in order for vulnerabilities to be integrated in social practices and requirements for justice to be fulfilled.

Remediation of a marine shore tailings deposit and the importance of water-rock interaction on element cycling in the coastal aquifer

We present the study of the geochemical processes associated with the first successful remediation of a marine shore tailings deposit in a coastal desert environment (Bahia de Ite, in the Atacama Desert of Peru). The remediation approach implemented a wetland on top of the oxidized tailings. The site is characterized by a high hydrauliz gradient produced by agricultural irrigation on upstream gravel terraces that pushed river water (similar to 500 mg/L SO(4)) toward the sea and through the tailings deposit. The geochemical and isotopic (delta(2)H(water) and delta(18)O(water), delta(34)S(sulfate) , delta(18)O(sulfate)) approach applied here revealed that evaporite horizons (anhydrite and halite) in the gravel terraces are the source of increased concentrations of SO(4), Cl, and Na up to similar to 1500 mg/L in the springs at the base of the gravel terraces. Deeper groundwater interacting with underlying marine sequences increased the concentrations of SO(4), Cl, and Na up to 6000 mg/L and increased the alkalinity up to 923 mg/L CaCO(3) eq. in the coastal aquifer. These waters infiltrated into the tailings deposit at the shelf-tailings interface. Nonremediated tailings had a low-pH oxidation zone (pH 1-4) with significant accumulations of efflorescent salts (10-20 cm thick) at the surface because of upward capillary transport of metal cations in the arid climate. Remediated tailings were characterized by neutral pH and reducing conditions (pH similar to 7, Eh similar to 100 mV). As a result, most bivalent metals such as Cu, Zn, and Ni had very low concentrations (around 0.01 mg/L or below detection limit) because of reduction and sorption processes. In contrast, these reducing conditions increased the mobility of iron from two sources in this system: (1) The originally Fe(III)-rich oxidation zone, where Fe(II) was reduced during the remediation process and formed an Fe(II) plume, and (2) reductive dissolution of Fe(III) oxides present in the original shelf lithology formed an Fe-Mn plume at 10-m depth. These two Fe-rich plumes were pushed toward the shoreline where more oxidizing and higher pH conditions triggered the precipitation of Fe(HI)hydroxide coatings on silicates. These coatings acted as a filter for the arsenic, which naturally infiltrated with the river water (similar to 500 mu g/L As natural background) into the tailings deposit.