The making of frozen-hydrated, vitreous lamellas from cells for cryo-electron microscopy.

There has been a long standing desire to produce thick (up to 500 nm) cryo-sections of fully hydrated cells and tissue for high-resolution analysis in their natural state by cryo-transmission electron microscopy. Here, we present a method that can successfully produce sections (lamellas in FIB-SEM terminology) of fully hydrated, unstained cells from high-pressure frozen samples by focused ion beam (FIB) milling. The samples are therefore placed in thin copper tubes and vitrified by high-pressure freezing. For transfer, handling and subsequent milling, the tubes are placed in a novel connective device (ferrule) that protects the sample from devitrification and contamination and passes through all operation steps. A piezo driven sample positioning stage (cryo-nano-bench, CNB) with three degrees of freedom was additionally developed to enable accurate milling of frozen-hydrated lamellas. With the CNB, high-pressure frozen samples can be milled to produce either thin lamellas (<100 nm), for direct imaging by high-resolution cryo-TEM or thicker lamellas (300-500 nm) for cryo-electron tomography. The sample remains vitreous throughout the process by using the presented tools and methods. The results are an important step towards investigating larger cells and even tissue in there natural state which in the end will enable us to gain better insights into cellular processes.

Traitement de la coxarthrose par des prothèses totales de hanche sur mesure [Treatment of coxarthrosis with fitted total hip prostheses replacement]

The treatment of hip osteoarthritis with total hip arthroplasty has continuously evolved since it was first introduced in the sixties. The problem of aseptic loosening of the cemented prostheses, mainly in young active patients, has stimulated two different types of research: on one side the improvement of cementing techniques and on the other side the development of cementless osteoinegrable implants. We discuss the problems of these cementless hip prostheses. Recently published anatomic and biomechanic studies have led to the development of personalized custom femoral stems for each patient. The conception technique and first clinical results are described.

Cryo-negative staining reveals conformational flexibility within yeast RNA polymerase I.

The structure of the yeast DNA-dependent RNA polymerase I (RNA Pol I), prepared by cryo-negative staining, was studied by electron microscopy. A structural model of the enzyme at a resolution of 1.8 nm was determined from the analysis of isolated molecules and showed an excellent fit with the atomic structure of the RNA Pol II Delta4/7. The high signal-to-noise ratio (SNR) of the stained molecular images revealed a conformational flexibility within the image data set that could be recovered in three-dimensions after implementation of a novel strategy to sort the "open" and "closed" conformations in our heterogeneous data set. This conformational change mapped in the "wall/flap" domain of the second largest subunit (beta-like) and allows a better accessibility of the DNA-binding groove. This displacement of the wall/flap domain could play an important role in the transition between initiation and elongation state of the enzyme. Moreover, a protrusion was apparent in the cryo-negatively stained model, which was absent in the atomic structure and was not detected in previous 3D models of RNA Pol I. This structure could, however, be detected in unstained views of the enzyme obtained from frozen hydrated 2D crystals, indicating that this novel feature is not induced by the staining process. Unexpectedly, negatively charged molybdenum compounds were found to accumulate within the DNA-binding groove, which is best explained by the highly positive electrostatic potential of this region of the molecule, thus, suggesting that the stain distribution reflects the overall surface charge of the molecule.

Les vertébroplasties: point de vue du rhumatologue [Vertebro-plasty: a rheumatologist's point of view]

Percutaneous vertebro-plasty is an efficient treatment of the symptomatic vertebral compression fracture refractory to optimal medical therapy. The procedure is used for neoplastic lesions, aggressive angioma, but also osteoporotic compression fractures. In order to adequately advice our patients, it is essential to know its indications and possible complications. However, to practice a vertebro-plasty for an osteoporotic compression fracture without any long term management of the osteoporotic disease is useless. Unfortunately, it still happens too often and it is essential that orthopedic surgeons, general practitioner, radiologist, rheumatologist, and any practitioners work together to guarantee the optimal management of our patients.

X-ray microtomography of Larger Foraminifera

X-ray microtomography has become a new tool in earth sciences to obtain non-destructive 3D-image data from geological objects in which variations in mineralogy, chemical composition and/or porosity create sufficient x-ray density contrasts.We present here first, preliminary results of an application to the external and internal morphology of Permian to Recent Larger Foraminifera. We use a SkyScan-1072 high-resolution desk-top micro-CT system. The system has a conical x-ray source with a spot size of about 5µm that runs at 20-100kV, 0-250µA, resulting in a maximal resolution of 5µm. X-ray transmission images are captured by a scintillator coupled via fibre optics to a 1024x1024 pixel 12-bit CCD. The object is placed between the x-ray source and the scintillator on a stub that rotates 360°around its vertical axis in steps as small as 0.24 degrees. Sample size is limited to 2 cm due to the absorption of geologic material for x-rays. The transmission images are back projected using a Feldkamp algorithm into a vertical stack of up to 1000 1Kx1K images that represent horizontal cuts of the object. This calculation takes 2 to several hours on a Double-Processor 2.4GHz PC. The stack of images (.bmp) can be visualized with any 3D-imaging software, used to produce cuts of Larger Foraminifera. Among other applications, the 3D-imaging software furnished by SkyScan can produce 3D-models by defining a threshold density value to distinguish "solid" from "void. Several models with variable threshold values and colors can be imbricated, rotated and cut together. The best results were obtained with microfossils devoid of chamber-filling cements (Permian, Eocene, Recent). However, even slight differences in cement mineralogy/composition can result in surprisingly good x-ray density contrasts.X-ray microtomography may develop into a powerful tool for larger microfossils with a complex internal structure, because it is non-destructive, requires no preparation of the specimens, and produces a true 3D-image data set. We will use these data sets in the future to produce cuts in any direction to compare them with arbitrary cuts of complex microfossils in thin sections. Many groups of benthic and planktonic foraminifera may become more easily determinable in thin section by this way.

Magma generation at the easternmost section of the Hellenic arc: Hf, Nd, Pb and Sr isotope geochemistry of Nisyros and Yali volcanoes (Greece)

Geochemical and petrographical studies of lavas and ignimbrites from the Quaternary Nisyros-Yali volcanic system in the easternmost part of the Hellenic arc (Greece) reveal insight into magma generating processes. A compositional gap between 61 and 68 wt.% SiO2 is recognized that coincides with the stratigraphic distinction between pre-caldera and postcaldera volcanic units. Trace element systematics support the subdivision of Nisyros and Yali volcanic units into two distinct suites of rocks. The variation of Nd and Hf present day isotope data and the fact that they are distinct from the isotope compositions of MORB rule out an origin by pure differentiation and require assimilation of a crustal component. Lead isotope ratios of Nisyros and Yali volcanic rocks support mixing of mantle material with a lower crust equivalent. However, Sr-87/Sr-86 ratios of 0.7036-0.7048 are incompatible with a simple binary mixing scenario and give low depleted mantle extraction ages (< 0.1 Ga), in contrast with Pb model ages of 0.3 Ga and Hf and Nd model ages of ca. 0.8 Ga. The budget of fluid-mobile elements Sr and Pb is likely to be dominated by abundant hydrous fluids characterised by mantle-like Sr isotope ratios. Late stage fluids probably were enriched in CO2, needed to explain the high Th concentrations. The occurrence of hydrated minerals (e.g., amphibole) in the first post-caldera unit with the lowermost Sr-87/Sr-86 ratio of 0.7036 +/- 2 can be interpreted as the result of the increased water activity in the source. The presence of two different plagioclase phenocryst generations in the first lava subsequent to the caldera-causing event is indicative for a longer storage time of this magma at a shallower level. A model capable of explaining these observations involves three evolutionary stages. First stage, assimilation of lower crustal material by a primitive magma of mantle origin (as modelled by Nd-Hf isotope systematics). This stage ended by an interruption in replenishment that led to an increase of crystallization and, hence, an increase in viscosity, suppressing eruption. During this time gap, differentiation by fractional crystallization led to enrichment of incompatible species, especially aqueous fluids, to silica depolymerisation and to a decrease in viscosity, finally enabling eruption again in the third stage. (c) 2005 Elsevier B.V. All rights reserved.

Clinical performance of cervical restorations: a meta-analysis.

OBJECTIVES: To carry out a meta-analysis in order to assess the influencing factors on retention loss and marginal discoloration of cervical restorations made of composites and glass ionomer (derivates). METHODS: The literature was searched for prospective clinical studies on cervical restorations with an observation period of at least 18 months. RESULTS: Fifty clinical studies involving 40 adhesive systems matched the inclusion criteria. On average, 10% of the cervical fillings were lost and 24% exhibited marginal discoloration after 3 years. The variability ranged from 0% to 50% for retention loss and from 0% to 74% for marginal discoloration. Hardly any secondary caries was detected. When linear mixed models with a study and experiment effect were used, the analysis revealed that the adhesive/restorative class had the most significant influence, with 2-step self-etching adhesive systems performing best and 1-step self-etching adhesive systems performing worst; 3-step etch-and-rinse systems, glass ionomers/resin-modified glass ionomers, 2-step etch-and-rinse systems and polyacid-modified resin composites were ranked in between. Restorations placed in teeth whose dentin/enamel had been prepared/roughened showed a statistically significant higher retention rate than those placed in teeth with unprepared dentin (p<0.05). Beveling of the enamel and the type of isolation used (rubberdam/cotton rolls) had no significant influence. SIGNIFICANCE: The clinical performance of cervical restorations is significantly influenced by the type of adhesive system used and/or the adhesive class to which the system belonged and whether the dentin/enamel is prepared or not. 2-Step self-etching- and 3-step etch&rinse systems shall be chosen over 1-step self-etching systems and glass ionomer derivates. The dentin (and enamel) surface shall be roughened before placement of the restoration.

Pooling of dentin microtensile bond strength data improves clinical correlation.

Purpose: To evaluate whether the correlation between in vitro bond strength data and estimated clinical retention rates of cervical restorations after two years depends on pooled data obtained from multicenter studies or single-test data. Materials and Methods: Pooled mean data for six dentin adhesive systems (Adper Prompt L-Pop, Clearfil SE, OptiBond FL, Prime & Bond NT, Single Bond, and Scotchbond Multipurpose) and four laboratory methods (macroshear, microshear, macrotensile and microtensile bond strength test) (Scherrer et al, 2010) were correlated to estimated pooled two-year retention rates of Class V restorations using the same adhesive systems. For bond strength data from a single test institute, the literature search in SCOPUS revealed one study that tested all six adhesive systems (microtensile) and two that tested five of the six systems (microtensile, macroshear). The correlation was determined with a database designed to perform a meta-analysis on the clinical performance of cervical restorations (Heintze et al, 2010). The clinical data were pooled and adjusted in a linear mixed model, taking the study effect, dentin preparation, type of isolation and bevelling of enamel into account. A regression analysis was carried out to evaluate the correlation between clinical and laboratory findings. Results: The results of the regression analysis for the pooled data revealed that only the macrotensile (adjusted R2 = 0.86) and microtensile tests (adjusted R2 = 0.64), but not the shear and the microshear tests, correlated well with the clinical findings. As regards the data from a single-test institute, the correlation was not statistically significant. Conclusion: Macrotensile and microtensile bond strength tests showed an adequate correlation with the retention rate of cervical restorations after two years. Bond strength tests should be carried out by different operators and/or research institutes to determine the reliability and technique sensitivity of the material under investigation.

Anachronistic facies from a drowned Lower Triassic carbonate platform: Lower member of the Alwa Formation (Ba'id Exotic), Oman Mountains

- The lower member of the Alwa Formation (Lower Olenekian), found within the Ba'id Exotic in the Oman Mountains (Sultanate of Oman), consists of ammonoid-bearing, pelagic limestones that were deposited on an isolated, drowned carbonate platform on the Neotethyan Gondwana margin. The strata contain a variety of unusual carbonate textures and features, including thrombolites, Frutexites-bearing microbialites that contain synsedimentary cements, matrix-free breccias surrounded by isopachous calcite cement, and fissures and cavities filled with large botryoidal cements. Thrombolites are found throughout the study interval, and occur as 0.5-1.0 m thick lenses or beds that contain laterally laterally-linked stromatactis cavities. The Frutexites-bearing microbialites occur less frequently, and also form lenses or beds, up to 30 cm thick; the microbialites may be laminated, and often developed on hardgrounds. In addition, the Frutexites-bearing microbialites also contain synsedimentary calcite cement crusts and botryoids (typically <1 cm thick) that harbour layers or pockets of what appear to be bacterial sheaths and coccoids, and are indicative of biologically mediated precipitation of the cement bodies. Slumping following lithification led to fracturing of the limestone and the precipitation of large, botryoidal aragonite cements in fissures that cut across the primary fabric. Environmental conditions, specifically palaeoxygenation and the degree of calcium carbonate supersaturation, likely controlled whether the thrombolites (high level of calcium carbonate supersaturation associated with vertical mixing of water masses and dysoxic conditions) or Frutexites-bearing microbialites (low level of calcium carbonate supersaturation associated with anoxic conditions and deposition below a stable chemocline) formed. The results of this study point to continued environmental stress in the region during the Early Triassic that likely contributed to the uneven recovery from the Permian-Triassic mass extinction.

Metamorphism and kinetics in the Torres del Paine contact aureole

Contact aureoles provide an excellent geologic environment to study the mechanisms of metamorphic reactions in a natural system. The Torres del Paine (TP) intrusion is one of the most spectacular natural laboratories because of its excellent outcrop conditions. It formed in a period from 12.59 to 12.43 Ma and consists of three large granite and four smaller mafic batches. The oldest granite is on top, the youngest at the bottom of the granitic complex, and the granites overly the mafic laccolith. The TP intruded at a depth of 2-3 km into regional metamorphic anchizone to greenschist facies pelites, sandstones, and conglomerates of the Cerro Toro and Punta Barrosa formations. It formed a thin contact aureole of 150-400 m width. This thesis focuses on the reaction kinetics of the mineral cordierite in the contact aureole using quantitative textural analysis methods. First cordierite was formed from chlorite break¬down (zone I, ca. 480 °C, 750 bar). The second cordierite forming reaction was the muscovite break-down, which is accompanied by a modal decrease in biotite and the appearance of k- feldspar (zone II, 540-550 °C, 750 bar). Crystal sizes of the roundish, poikiloblastic cordierites were determined from microscope thin section images by manually marking each crystal. Images were then automatically processed with Matlab. The correction for the intersection probability of each crystal radius yields the crystal size distribution in the rock. Samples from zone I below the laccolith have the largest crystals (0.09 mm). Cordierites from zone II are smaller, with a maximum crystal radius of 0.057 mm. Rocks from zone II have a larger number of small cordierite crystals than rocks from zone I. A combination of these quantitative analysis with numerical modeling of nucleation and growth, is used to infer nucleation and growth parameters which are responsible for the observed mineral textures. For this, the temperature-time paths of the samples need to be known. The thermal history is complex because the main body of the intrusion was formed by several intrusive batches. The emplacement mechanism and duration of each batch can influence the thermal structure in the aureole. A possible subdivision of batches in smaller increments, so called pulses, will focus heat at the side of the intrusion. Focusing all pulses on one side increases the contact aureole size on that side, but decreases it on the other side. It forms a strongly asymmetric contact aureole. Detailed modeling shows that the relative thicknesses of the TP contact aureole above and below the intrusion (150 and 400 m) are best explained by a rapid emplacement of at least the oldest granite batch. Nevertheless, temperatures are significantly too low in all models, compared to observed mineral assemblages in the hornfelses. Hence, an other important thermal mechanisms needs to take place in the host rock. Clastic minerals in the immature sediments outside the contact aureole are hydrated due to small amounts of expelled fluids during contact metamorphism. This leads to a temperature increase of up to 50 °C. The origin of fluids can be traced by stable isotopes. Whole rock stable isotope data (6D and δ180) and chlorine concentrations in biotite document that the TP intrusion induced only very small amounts of fluid flow. Oxygen whole rock data show δ180 values between 9.0 and 10.0 %o within the first 5 m of the contact. Values increase to 13.0 - 15.0 %o further away from the intrusion. Whole rock 6D values display a more complex zoning. First, host rock values (-90 to -70 %o) smoothly decrease towards the contact by ca. 20 %o, up to a distance of ca. 150 m. This is followed by an increase of ca. 20 %o within the innermost 150 m of the aureole (-97.0 to -78 %o at the contact). The initial decrease in 6D values is interpreted to be due to Rayleigh fractionation accompanying the dehydration reactions forming cordierite, while the final increase reflects infiltration of water-rich fluids from the intrusion. An over-estimate on the quantity and the corresponding thermal effect yields a temperature increase of less than 30 °C. This suggests that fluid flow might have contributed only for a small amount to the thermal evolution of the system. A combination of the numerical growth model with the thermal model, including the hydration reaction enthalpies but neglecting fluid flow and incremental growth, can be used to numerically reproduce the observed cordierite textures in the contact aureole. This yields kinetic parameters which indicate fast cordierite crystallization before the thermal peak in the inner aureole, and continued reaction after the thermal peak in the outermost aureole. Only small temperature dependencies of the kinetic parameters seem to be needed to explain the obtained crystal size data. - Les auréoles de contact offrent un cadre géologique privilégié pour l'étude des mécanismes de réactions métamorphiques associés à la mise en place de magmas dans la croûte terrestre. Par ses conditions d'affleurements excellentes, l'intrusion de Torres del Paine représente un site exceptionnel pour améliorer nos connaissances de ces processus. La formation de cette intrusion composée de trois injections granitiques principales et de quatre injections mafiques de volume inférieur couvre une période allant de 12.50 à 12.43 Ma. Le plus vieux granite forme la partie sommitale de l'intrusion alors que l'injection la plus jeune s'observe à la base du complexe granitique; les granites recouvrent la partie mafique du laccolite. L'intrusion du Torres del Paine s'est mise en place a 2-3 km de profondeur dans un encaissant métamorphique. Cet encaissant est caractérisé par un métamorphisme régional de faciès anchizonal à schiste vert et est composé de pélites, de grès, et des conglomérats des formations du Cerro Toro et Punta Barrosa. La mise en place des différentes injections granitiques a généré une auréole de contact de 150-400 m d'épaisseur autour de l'intrusion. Cette thèse se concentre sur la cinétique de réaction associée à la formation de la cordiérite dans les auréoles de contact en utilisant des méthodes quantitatives d'analyses de texture. On observe plusieurs générations de cordiérite dans l'auréole de contact. La première cordiérite est formée par la décomposition de la chlorite (zone I, environ 480 °C, 750 bar), alors qu'une seconde génération de cordiérite est associée à la décomposition de la muscovite, laquelle est accompagnée par une diminution modale de la teneur en biotite et l'apparition de feldspath potassique (zone II, 540-550 °C, 750 bar). Les tailles des cristaux de cordiérites arrondies et blastic ont été déterminées en utilisant des images digitalisées des lames minces et en marquant individuellement chaque cristal. Les images sont ensuite traitées automatiquement à l'aide du programme Matlab. La correction de la probabilité d'intersection en fonction du rayon des cristaux permet de déterminer la distribution de la taille des cristaux dans la roche. Les échantillons de la zone I, en dessous du lacolite, sont caractérisés par de relativement grands cristaux (0.09 mm). Les cristaux de cordiérite de la zone II sont plus petits, avec un rayon maximal de 0.057 mm. Les roches de la zone II présentent un plus grand nombre de petits cristaux de cordiérite que les roches de la zone I. Une combinaison de ces analyses quantitatives avec un modèle numérique de nucléation et croissance a été utilisée pour déduire les paramètres de nucléation et croissance contrôlant les différentes textures minérales observées. Pour développer le modèle de nucléation et de croissance, il est nécessaire de connaître le chemin température - temps des échantillons. L'histoire thermique est complexe parce que l'intrusion est produite par plusieurs injections successives. En effet, le mécanisme d'emplace¬ment et la durée de chaque injection peuvent influencer la structure thermique dans l'auréole. Une subdivision des injections en plus petits incréments, appelés puises, permet de concentrer la chaleur dans les bords de l'intrusion. Une mise en place préférentielle de ces puises sur un côté de l'intrusion modifie l'apport thermique et influence la taille de l'auréole de contact produite, auréole qui devient asymétrique. Dans le cas de la première injection de granite, une modélisation détaillée montre que l'épaisseur relative de l'auréole de contact de Torres del Paine au-dessus et en dessous de l'intrusion (150 et 400 m) est mieux expliquée par un emplacement rapide du granite. Néanmoins, les températures calculées dans l'auréole de con¬tact sont trop basses pour que les modèles thermiques soient cohérants par rapport à la taille de cette auréole. Ainsi, un autre mecanisme exothermique est nécessaire pour permettre à la roche encais¬sante de produire les assemblages observés. L'observation des roches encaissantes entourant les granites montre que les minéraux clastiques dans les sédiments immatures au-dehors de l'auréole sont hydratés suite à la petite quantité de fluide expulsée durant le métamorphisme de contact et/ou la mise en place des granites. Les réactions d'hydratation peuvent permettre une augmentation de la température jusqu'à 50 °C. Afin de déterminer l'origine des fluides, une étude isotopique de roches de l'auréole de contact a été entreprise. Les isotopes stables d'oxygène et d'hydrogène sur la roche totale ainsi que la concentration en chlore dans la biotite indiquent que la mise en place des granites du Torres del Paine n'induit qu'une circulation de fluide limitée. Les données d'oxygène sur roche totale montrent des valeurs δ180 entre 9.0 et 10.0%o au sein des cinq premiers mètres du contact. Les valeurs augmentent jusqu'à 13.0 - 15.0 plus on s'éloigne de l'intrusion. Les valeurs 5D sur roche totale montrent une zonation plus complexe. Les valeurs de la roche encaissante (-90 à -70%o) diminuent progressivement d'environ 20%o depuis l'extérieur de l'auréole jusqu'à une distance d'environ 150 m du granite. Cette diminution est suivie par une augmentation d'environ 20%o au sein des 150 mètres les plus proches du contact (-97.0 à -78%o au contact). La diminution initiale des valeurs de 6D est interprétée comme la conséquence du fractionnement de Rayleigh qui accompagne les réactions de déshydratation formant la cordiérite, alors que l'augmentation finale reflète l'infiltration de fluide riche en eau venant de l'intrusion. A partir de ces résultats, le volume du fluide issu du granite ainsi que son effet thermique a pu être estimé. Ces résultats montrent que l'augmentation de température associée à ces fluides est limitée à un maximum de 30 °C. La contribution de ces fluides dans le bilan thermique est donc faible. Ces différents résultats nous ont permis de créer un modèle thermique associé à la for¬mation de l'auréole de contact qui intègre la mise en place rapide du granite et les réactions d'hydratation lors du métamorphisme. L'intégration de ce modèle thermique dans le modèle numérique de croissance minérale nous permet de calculer les textures des cordiérites. Cepen¬dant, ce modèle est dépendant de la vitesse de croissance et de nucléation de ces cordiérites. Nous avons obtenu ces paramètres en comparant les textures prédites par le modèle et les textures observées dans les roches de l'auréole de contact du Torres del Paine. Les paramètres cinétiques extraits du modèle optimisé indiquent une cristallisation rapide de la cordiérite avant le pic thermique dans la partie interne de l'auréole, et une réaction continue après le pic thermique dans la partie la plus externe de l'auréole. Seules de petites dépendances de température des paramètres de cinétique semblent être nécessaires pour expliquer les don¬nées obtenues sur la distribution des tailles de cristaux. Ces résultats apportent un éclairage nouveau sur la cinétique qui contrôle les réactions métamorphiques.

Three-dimensional computed cementless custom femoral stems in young patients: midterm followup.

We prospectively evaluated the results of our custom cementless femoral stems to ascertain whether this technology produced reasonable clinical function, complication rates, and loosening rates at midterm. Fifty-seven consecutive patients had surgery in 62 hips for primary osteoarthritis at a mean age of 57 years using a three-dimensional computed custom cementless stem. Patients were reviewed at a mean followup of 94.9 months. At review, the mean Harris hip score was 98.8 points (range, 84-100) compared with 61.1 (range, 28-78) points preoperatively. No patient complained of thigh pain. No migration or subsidence was observed. All stems were considered stable according to the radiographic criteria defined by Engh et al. There were no dislocations, no infections, and no reoperations. Our results are comparable with published results from clinical and radiologic points of view. Two problems remain unsolved: the price of a custom stem is twice as expensive as a standard stem; and we need longer term results before definitely recommending this technology as a reasonable alternative to current arthroplasties in younger patients. The data support the continued exploration of this technology with controlled clinical followup. LEVEL OF EVIDENCE: Therapeutic study, Level II-1 (prospective cohort study). See the Guidelines to Authors for a complete description of levels of evidence.

Optimization of preservation conditions of As (III) bioreporter bacteria.

Long-term preservation of bioreporter bacteria is essential for the functioning of cell-based detection devices, particularly when field application, e.g., in developing countries, is intended. We varied the culture conditions (i.e., the NaCl content of the medium), storage protection media, and preservation methods (vacuum drying vs. encapsulation gels remaining hydrated) in order to achieve optimal preservation of the activity of As (III) bioreporter bacteria during up to 12 weeks of storage at 4 degrees C. The presence of 2% sodium chloride during the cultivation improved the response intensity of some bioreporters upon reconstitution, particularly of those that had been dried and stored in the presence of sucrose or trehalose and 10% gelatin. The most satisfying, stable response to arsenite after 12 weeks storage was obtained with cells that had been dried in the presence of 34% trehalose and 1.5% polyvinylpyrrolidone. Amendments of peptone, meat extract, sodium ascorbate, and sodium glutamate preserved the bioreporter activity only for the first 2 weeks, but not during long-term storage. Only short-term stability was also achieved when bioreporter bacteria were encapsulated in gels remaining hydrated during storage.

The structure of nervous tissue and of Gram-positive bacteria studied by cryo-electron microscopy of vitreous sections

Résumé La structure, ou l'architecture, des êtres vivants définit le cadre dans lequel la physique de la vie s'accomplit. La connaissance de cette structure dans ses moindres détails est un but essentiel de la biologie. Son étude est toutefois entravée par des limitations techniques. Malgré son potentiel théorique, la microscopie électronique n'atteint pas une résolution atomique lorsqu'elle est appliquée ä la matièxe biologique. Cela est dû en grande partie au fait qu'elle contient beaucoup d'eau qui ne résiste pas au vide du microscope. Elle doit donc être déshydratée avant d'être introduite dans un microscope conventionnel. Des artéfacts d'agrégation en découlent inévitablement. La cryo-microscopie électronique des sections vitreuses (CEMOVIS) a ëté développée afin de résoudre cela. Les spécimens sont vitrifiés, c.-à-d. que leur eau est immobilisée sans cristalliser par le froid. Ils sont ensuite coupés en sections ultrafines et celles-ci sont observées à basse température. Les spécimens sont donc observés sous forme hydratée et non fixée; ils sont proches de leur état natif. Durant longtemps, CEMOVIS était très difficile à exécuter mais ce n'est plus le cas. Durant cette thèse, CEMOVIS a été appliqué à différents spécimens. La synapse du système nerveux central a été étudiée. La présence dans la fente synaptique d'une forte densité de molécules organisées de manière périodique a été démontrée. Des particules luminales ont été trouvées dans Ies microtubules cérébraux. Les microtubules ont servi d'objets-test et ont permis de démontrer que des détails moléculaires de l'ordre du nm sont préservés. La compréhension de la structure de l'enveloppe cellulaire des bactéries Grampositives aété améliorée. Nos observations ont abouti à l'élaboration d'un nouveau modèle hypothétique de la synthèse de la paroi. Nous avons aussi focalisé notre attention sur le nucléoïde bactérien et cela a suscité un modèle de la fonction des différents états structuraux du nucléoïde. En conclusion, cette thèse a démontré que CEMOVIS est une excellente méthode poux étudier la structure d'échantillons biologiques à haute résolution. L'étude de la structure de divers aspects des êtres vivants a évoqué des hypothèses quant à la compréhension de leur fonctionnement. Summary The structure, or the architecture, of living beings defines the framework in which the physics of life takes place. Understanding it in its finest details is an essential goal of biology. Its study is however hampered by technical limitations. Despite its theoretical potential, electron microscopy cannot resolve individual atoms in biological matter. This is in great part due to the fact. that it contains a lot of water that cannot stand the vacuum of the microscope. It must therefore be dehydrated before being introduced in a conventional mìcroscope. Aggregation artefacts unavoidably happen. Cryo-electron microscopy of vitreous sections (CEMOVIS) has been developed to solve this problem. Specimens are vitrified, i.e. they are rapidly cooled and their water is immobilised without crystallising by the cold. They are then. sectioned in ultrathin slices, which are observed at low temperatures. Specimens are therefore observed in hydrated and unfixed form; they are close to their native state. For a long time, CEMOVIS was extremely tedious but this is not the case anymore. During this thesis, CEMOVIS was applied to different specimens. Synapse of central nervous system was studied. A high density of periodically-organised molecules was shown in the synaptic cleft. Luminal particles were found in brain microtubules. Microtubules, used as test specimen, permitted to demonstrate that molecular details of the order of nm .are preserved. The understanding of the structure of cell envelope of Gram-positive bacteria was improved. Our observations led to the elaboration of a new hypothetic model of cell wall synthesis. We also focused our attention on bacterial nucleoids and this also gave rise to a functional model of nucleoid structural states. In conclusion, this thesis demonstrated that CEMOVIS is an excellent method for studying the structure of bìologìcal specimens at high resolution. The study of the structure of various aspects of living beings evoked hypothesis for their functioning.

Vancomycin exposure from active calcium sulfate bone filler

Objective: Bone cements and substitutes are commonly used in surgery to deliver antibiotics locally. The objective of this study was to assess the systemic absorption and disposition of vancomycin in patients treated with active calcium sulfate bone filler and to predict systemic concentrations under various conditions. Method: 277 blood samples were taken from 42 patients receiving vancomycin in bone cement during surgery. Blood samples were collected from 3h to 10 days after implantation. Vancomycin was measured by immunoenzymatic assay. Population pharmacokinetic (PK) analysis was performed using NONMEM to assess average estimates and variability of PK parameters. Based on the final model, simulations with various doses and renal function levels were performed. Results: The patients were 64 ± 20 years old, their body weight was 81 ± 22 kg and Cockcroft-Gault creatinine clearance (CLcr) 98 ± 55 mL/min. Vancomycin doses ranged from 200 mg to 6000 mg and implantation sites were hip (n=16), tibia (10) or others (16). Concentration profiles remained low and consistent with absorption rate-limited first-order release, while showing prominent variability. Mean clearance (CL) was 3.87 L/h (CV 35%), absorption rate constant (ka) 0.004 h-1 (66%) and volume of distribution (V) 9.5 L. Simulations with up to 8000 mg vancomycin implant showed systemic concentrations exceeding 20 mg/L for 3.5 days in 43% of the patients with CLcr 15 mL/min, whereas 7% of the patients with normal renal function had a concentration above 20 mg/L for 1.1 days. Subtherapeutic concentrations (0.4-4 mg/L) were predicted during a median of 22 days in patients with normal renal function and 4000 mg vancomycin implant, with limited influence of dose or renal function. Conclusion: Vancomycin-laden calcium sulfate implant does not raise toxicity concern. Selection of resistant bacteria, such as Enterococcus and Staphylococcus species, might however be a concern, as simulations show persistent subtherapeutic systemic concentrations during 3 to 4 weeks in these patients.