Medical aspects of helicopter rescue missions involving winching of a physician

Introduction: Whereas the use of helicopters as a rapid means toreach victims and to bring them to a secure place is well-recognized,very few data are available about the value of winching physicians toprovide medical care for the victims directly on-site. We sought to studythe medical aspects of alpine helicopter rescue operations involving thewinching of an emergency physician to the victim.Methods: We retrospectively reviewed the medical reports of a singlehelicopter-based emergency medical service. Data from 1 January 2003to 31 December 2008 were analyzed. Cases with emergency callindicating that the victim was deceased were excluded. Data includedthe category (trauma or illnesses), and severity (NACA score) of theinjuries, along with the main medical procedures performed on site.Results: 9879 rescue missions were conducted between 1 January2003 and 31 December 2008. The 921 (9.3%) missions involvingwinching of the emergency physician were analysed. 840 (91%)patients suffered from trauma-related injuries. The cases of the 81 (9%)people presenting with medical emergencies were, when compared tothe trauma victims, significantly more severe according to the NACAindex (p <0.001). Overall, 246 (27%) patients had a severe injury orillness, namely, a potential or overt vital threat (NACA score between4-6, table 1). A total of 478 (52%) patients required administration ofmajor analgesics: fentanyl (443 patients; 48%), ketamine (42 patients;5%) or morphine (7 patients; 1%). The mean dose of fentanyl was 188micrograms (range 25-750, SD 127). Major medical interventions wereperformed 72 times on 39 (4%) patients (table 2).Conclusions: The severity of the patients' injuries or illnesses alongwith the high proportion of medical procedures performed directlyon-site validate emergency physician winching for advanced life supportprocedures and analgesia.

Automation in clinical bacteriology: what system to choose?

With increased activity and reduced financial and human resources, there is a need for automation in clinical bacteriology. Initial processing of clinical samples includes repetitive and fastidious steps. These tasks are suitable for automation, and several instruments are now available on the market, including the WASP (Copan), Previ-Isola (BioMerieux), Innova (Becton-Dickinson) and Inoqula (KIESTRA) systems. These new instruments allow efficient and accurate inoculation of samples, including four main steps: (i) selecting the appropriate Petri dish; (ii) inoculating the sample; (iii) spreading the inoculum on agar plates to obtain, upon incubation, well-separated bacterial colonies; and (iv) accurate labelling and sorting of each inoculated media. The challenge for clinical bacteriologists is to determine what is the ideal automated system for their own laboratory. Indeed, different solutions will be preferred, according to the number and variety of samples, and to the types of sample that will be processed with the automated system. The final choice is troublesome, because audits proposed by industrials risk being biased towards the solution proposed by their company, and because these automated systems may not be easily tested on site prior to the final decision, owing to the complexity of computer connections between the laboratory information system and the instrument. This article thus summarizes the main parameters that need to be taken into account for choosing the optimal system, and provides some clues to help clinical bacteriologists to make their choice.

Accidentologic aspects of helicopter rescue missions involving winching of a physician

Introduction: Medical helicopter services provide several advantages,like the ability to perform air searches for lost victims, a rapid method ofshuttling rescue personnel and equipment to the victim, and the deliveryof early on-site advance medical care. When landing is not possible, therescuers can also be directly winched to the victim. As outdoor activitiesare increasing, few data are available about the type of accidentsleading to a rescue operation involving the use of the winch. We soughtto study the epidemiology and accidentology of such rescues.Methods: We retrospectively reviewed the medical reports of a singlehelicopter-based emergency medical service. Data from 1 January 2003to 31 December 2008 were analyzed. Cases with emergency callindicating that the victim was deceased were excluded. Data includedthe age and gender of the patients, the type of patients activitypreceeding the injury, the mecanism of injury, and the type of lesions(main diagnosis).Results: 9879 rescue missions were conducted between 1 January2003 and 31 December 2008. The 921 (9.3%) missions involvingwinching of the emergency physician were analysed. The male:femaleratio of the patients was 2:1. There were 56 (6%) patients aged 15 orunder. Most of the patients, while injured, were practising winter sportsor mountain-related activities in the summer (table 1). Falls accountedfor the great majority of the trauma events (700 patients or 76%),followed by illnesses (81 patients or 9 %). Of the 921 missions in whichthe physician was winched in the field, 28 (3%) were avalanche rescuesand 13 (1%) were glacier crevasse rescues. Trauma to the upper andlower extremities accounted for 429 (47%) of all injuries, followed by175 (19%) head injuries and 108 (12%) spinal lesions. Hypothermia,frostbite and altitude illnesses were diagnosed in 11 (1%) cases.In 128(14%) cases two different diagnoses were made, and in 69 (7%) threeor more diagnoses.Conclusions: In our helicopter emergency base, between 2003 and2008, 921 rescue missions (9.3%) involved winching of the emergencydoctor. Patients rescued using the winch usually practice outdoorsports, and are predominantly male. The mechanism of the injury isusually a fall, and extremities and head injuries account for more than50% of the main diagnosis made on the field.

Helicopter rescue operations involving winching of an emergency physician.

OBJECTIVE: We sought to study the epidemiologic and medical aspects of alpine helicopter rescue operations involving the winching of an emergency physician to the victim. METHODS: We retrospectively reviewed the medical and operational reports of a single helicopter-based emergency medical service. Data from 1 January 2003 to 31 December 2008 were analysed. RESULTS: A total of 921 patients were identified, with a male:female ratio of 2:1. There were 56 (6%) patients aged 15 or under. The median time from emergency call to helicopter take-off was 7 min (IQR = 5-10 min). 840 (91%) patients suffered from trauma-related injuries, with falls from heights during sports activities the most frequent event. The most common injuries involved the legs (246 or 27%), head (175 or 19%), upper limbs (117 or 13%), spine (108 or 12%), and femur (66 or 7%). Only 81 (9%) victims suffered from a medical emergency, but these cases were, when compared to the trauma victims, significantly more severe according to the NACA index (p<0.001). Overall, 246 (27%) patients had a severe injury or illness, namely, a potential or overt vital threat (NACA score between 4 and 6). A total of 478 (52%) patients required administration of major analgesics: fentanyl (443 patients or 48%), ketamine (42 patients or 5%) or morphine (7 patients or 1%). The mean dose of fentanyl was 188 micrograms (range 25-750, SD 127). Major medical interventions such as administration of vasoactive drugs, intravenous perfusions of more than 1000 ml of fluids, ventilation or intubation were performed on 39 (4%) patients. CONCLUSIONS: The severity of the patients' injuries or illnesses along with the high proportion of medical procedures performed directly on-site validates emergency physician winching for advanced life support procedures and analgesia.

Three essays on major trends in a slow clockspeed industry : the case of industrial automation

The motivation for this research initiated from the abrupt rise and fall of minicomputers which were initially used both for industrial automation and business applications due to their significantly lower cost than their predecessors, the mainframes. Later industrial automation developed its own vertically integrated hardware and software to address the application needs of uninterrupted operations, real-time control and resilience to harsh environmental conditions. This has led to the creation of an independent industry, namely industrial automation used in PLC, DCS, SCADA and robot control systems. This industry employs today over 200'000 people in a profitable slow clockspeed context in contrast to the two mainstream computing industries of information technology (IT) focused on business applications and telecommunications focused on communications networks and hand-held devices. Already in 1990s it was foreseen that IT and communication would merge into one Information and communication industry (ICT). The fundamental question of the thesis is: Could industrial automation leverage a common technology platform with the newly formed ICT industry? Computer systems dominated by complex instruction set computers (CISC) were challenged during 1990s with higher performance reduced instruction set computers (RISC). RISC started to evolve parallel to the constant advancement of Moore's law. These developments created the high performance and low energy consumption System-on-Chip architecture (SoC). Unlike to the CISC processors RISC processor architecture is a separate industry from the RISC chip manufacturing industry. It also has several hardware independent software platforms consisting of integrated operating system, development environment, user interface and application market which enables customers to have more choices due to hardware independent real time capable software applications. An architecture disruption merged and the smartphone and tablet market were formed with new rules and new key players in the ICT industry. Today there are more RISC computer systems running Linux (or other Unix variants) than any other computer system. The astonishing rise of SoC based technologies and related software platforms in smartphones created in unit terms the largest installed base ever seen in the history of computers and is now being further extended by tablets. An underlying additional element of this transition is the increasing role of open source technologies both in software and hardware. This has driven the microprocessor based personal computer industry with few dominating closed operating system platforms into a steep decline. A significant factor in this process has been the separation of processor architecture and processor chip production and operating systems and application development platforms merger into integrated software platforms with proprietary application markets. Furthermore the pay-by-click marketing has changed the way applications development is compensated: Three essays on major trends in a slow clockspeed industry: The case of industrial automation 2014 freeware, ad based or licensed - all at a lower price and used by a wider customer base than ever before. Moreover, the concept of software maintenance contract is very remote in the app world. However, as a slow clockspeed industry, industrial automation has remained intact during the disruptions based on SoC and related software platforms in the ICT industries. Industrial automation incumbents continue to supply systems based on vertically integrated systems consisting of proprietary software and proprietary mainly microprocessor based hardware. They enjoy admirable profitability levels on a very narrow customer base due to strong technology-enabled customer lock-in and customers' high risk leverage as their production is dependent on fault-free operation of the industrial automation systems. When will this balance of power be disrupted? The thesis suggests how industrial automation could join the mainstream ICT industry and create an information, communication and automation (ICAT) industry. Lately the Internet of Things (loT) and weightless networks, a new standard leveraging frequency channels earlier occupied by TV broadcasting, have gradually started to change the rigid world of Machine to Machine (M2M) interaction. It is foreseeable that enough momentum will be created that the industrial automation market will in due course face an architecture disruption empowered by these new trends. This thesis examines the current state of industrial automation subject to the competition between the incumbents firstly through a research on cost competitiveness efforts in captive outsourcing of engineering, research and development and secondly researching process re- engineering in the case of complex system global software support. Thirdly we investigate the industry actors', namely customers, incumbents and newcomers, views on the future direction of industrial automation and conclude with our assessments of the possible routes industrial automation could advance taking into account the looming rise of the Internet of Things (loT) and weightless networks. Industrial automation is an industry dominated by a handful of global players each of them focusing on maintaining their own proprietary solutions. The rise of de facto standards like IBM PC, Unix and Linux and SoC leveraged by IBM, Compaq, Dell, HP, ARM, Apple, Google, Samsung and others have created new markets of personal computers, smartphone and tablets and will eventually also impact industrial automation through game changing commoditization and related control point and business model changes. This trend will inevitably continue, but the transition to a commoditized industrial automation will not happen in the near future.

Helicopter rescue involving the winching of a physician.

INTRODUCTION: We sought to study the operational and medical aspects of helicopter rescue missions involving the use of a winch.¦SETTING: A single helicopter-based medical service of a pre-alpine region of Switzerland.¦METHODS: We prospectively studied consecutive primary rescue interventions involving winching of a physician, from October 1, 1998 to October 1, 2002. Demographic, medical and operational aspects as well as outcome at 48 hours were analyzed.¦RESULTS: We included 133 patients. Most (74%) were male, with traumatic injuries (77%). The median scene time of the nine severely injured patients (Injury Severity Scale [ISS] > 15) was significantly longer compared with the other patients (54 vs 37 minutes; P < .05). The main medical procedures performed were orotracheal intubation (n = 5), fracture reductions (n = 5), major analgesia with sedation (n = 4), and intravenous fluid administration of more than 1,500 mL (n = 4). Fourteen (10%) patients suffering from minor injuries were triaged by the physician and not airlifted to the hospital. All 133 patients were alive at 48 hours. Sixty-nine (52%) were still hospitalized. No secondary interhospital transfer was required.¦CONCLUSION: Our study provides a better knowledge of injury profile, medical aspects, and outcomes of patients rescued necessitating a winching procedure.

Helicopter rescue involving the winching of a physician

1855 missions de secours héliportés impliquant le treuillage d'un médecin ont été répertoriées. L'étude de la gravité des blessures ainsi que les difficultés pour accéder au patient ont permis de répondre à la question de la pertinence de ces procédures. Enjeu L'utilisation d'hélicoptères dans un système extra-hospitalier ainsi que la médicalisation de ces derniers est controversée. Des problèmes liés au coût, à la sécurité ainsi qu'à l'efficacité ont été évoqués. Les critères d'engagement sont également régulièrement remis en cause. Aucune étude récente ne s'est intéressée à la pertinence du système suisse et c'était un des objectifs de ce travail. Contexte L'étude s'est intéressée à tous les patients pris en charge par les médecins de la base Rega de Lausanne pendant une durée de 4 ans Conclusions Le treuillage héliporté est nécessaire pour un nombre significatif de patients. La gravité des diagnostics et le nombre de procédures médicales avancées justifient la médicalisation ainsi que le treuillage en raison des difficultés d'accès et d'évacuation. Perspectives Cette étude permet de répondre à l'utilité de la médicalisation en terrain difficile pour la région étudiée. Toutefois ces résultats ne devraient pas être extrapolés à d'autres régions ni à d'autres pays. Des études similaires sont nécessaires afin de permettre une comparaison internationale des différents services de secours héliportés

Laboratory automation in clinical bacteriology: what system to choose?

Automation was introduced many years ago in several diagnostic disciplines such as chemistry, haematology and molecular biology. The first laboratory automation system for clinical bacteriology was released in 2006, and it rapidly proved its value by increasing productivity, allowing a continuous increase in sample volumes despite limited budgets and personnel shortages. Today, two major manufacturers, BD Kiestra and Copan, are commercializing partial or complete laboratory automation systems for bacteriology. The laboratory automation systems are rapidly evolving to provide improved hardware and software solutions to optimize laboratory efficiency. However, the complex parameters of the laboratory and automation systems must be considered to determine the best system for each given laboratory. We address several topics on laboratory automation that may help clinical bacteriologists to understand the particularities and operative modalities of the different systems. We present (a) a comparison of the engineering and technical features of the various elements composing the two different automated systems currently available, (b) the system workflows of partial and complete laboratory automation, which define the basis for laboratory reorganization required to optimize system efficiency, (c) the concept of digital imaging and telebacteriology, (d) the connectivity of laboratory automation to the laboratory information system, (e) the general advantages and disadvantages as well as the expected impacts provided by laboratory automation and (f) the laboratory data required to conduct a workflow assessment to determine the best configuration of an automated system for the laboratory activities and specificities.

Ten years of R&D and full automation in molecular diagnosis.

A 10-year experience of our automated molecular diagnostic platform that carries out 91 different real-time PCR is described. Progresses and future perspectives in molecular diagnostic microbiology are reviewed: why automation is important; how our platform was implemented; how homemade PCRs were developed; the advantages/disadvantages of homemade PCRs, including the critical aspects of troubleshooting and the need to further reduce the turnaround time for specific samples, at least for defined clinical settings such as emergencies. The future of molecular diagnosis depends on automation, and in a novel perspective, it is time now to fully acknowledge the true contribution of molecular diagnostic and to reconsider the indication for PCR, by also using these tests as first-line assays.

Femtosecond-laser assisted cataract surgery: a review.

Introduced in 2008, the femtosecond laser is a promising new technological advance which plays an ever increasing role in cataract surgery where it automates the three main surgical steps: corneal incision, capsulotomy and lens fragmentation. The proven advantages over manual surgery are: a better quality of incision with reduced induced astigmatism; increased reliability and reproducibility of the capsulotomy with increased stability of the implanted lens; a reduction in the use of ultrasound. Regarding refractive results or safety, however, no prospective randomized study to date has shown significant superiority compared with standard manual technique. The significant extra cost generated by this laser, undertaken by the patient, is a limiting factor for both its use and study. This review outlines the potential benefits of femtosecond-laser-assisted cataract surgery due to the automation of key steps and the safety of this new technology.