Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.

Exhaled breath condensate as a matrix for combustion-based nanoparticle exposure and health effect evaluation

Health assessment and medical surveillance of workers exposed to combustion nanoparticles are challenging. The aim was to evaluate the feasibility of using exhaled breath condensate (EBC) from healthy volunteers for (1) assessing the lung deposited dose of combustion nanoparticles and (2) determining the resulting oxidative stress by measuring hydrogen peroxide (H2O2) and malondialdehyde (MDA). Methods: Fifteen healthy nonsmoker volunteers were exposed to three different levels of sidestream cigarette smoke under controlled conditions. EBC was repeatedly collected before, during, and 1 and 2 hr after exposure. Exposure variables were measured by direct reading instruments and by active sampling. The different EBC samples were analyzed for particle number concentration (light-scattering-based method) and for selected compounds considered oxidative stress markers. Results: Subjects were exposed to an average airborne concentration up to 4.3×10(5) particles/cm(3) (average geometric size ∼60-80 nm). Up to 10×10(8) particles/mL could be measured in the collected EBC with a broad size distribution (50(th) percentile ∼160 nm), but these biological concentrations were not related to the exposure level of cigarette smoke particles. Although H2O2 and MDA concentrations in EBC increased during exposure, only H2O2 showed a transient normalization 1 hr after exposure and increased afterward. In contrast, MDA levels stayed elevated during the 2 hr post exposure. Conclusions: The use of diffusion light scattering for particle counting proved to be sufficiently sensitive to detect objects in EBC, but lacked the specificity for carbonaceous tobacco smoke particles. Our results suggest two phases of oxidation markers in EBC: first, the initial deposition of particles and gases in the lung lining liquid, and later the start of oxidative stress with associated cell membrane damage. Future studies should extend the follow-up time and should remove gases or particles from the air to allow differentiation between the different sources of H2O2 and MDA.

Combined impact of negative lifestyle factors on cardiovascular risk in children: a randomized prospective study.

PURPOSE: Negative lifestyle factors are known to be associated with increased cardiovascular risk (CVR) in children, but research on their combined impact on a general population of children is sparse. Therefore, we aimed to quantify the combined impact of easily assessable negative lifestyle factors on the CVR scores of randomly selected children after 4 years. METHODS: Of the 540 randomly selected 6- to 13-year-old children, 502 children participated in a baseline health assessment, and 64% were assessed again after 4 years. Measures included anthropometry, fasting blood samples, and a health assessment questionnaire. Participants scored one point for each negative lifestyle factor at baseline: overweight; physical inactivity; high media consumption; little outdoor time; skipping breakfast; and having a parent who has ever smoked, is inactive, or overweight. A CVR score at follow-up was constructed by averaging sex- and age-related z-scores of waist circumference, blood pressure, glucose, inverted high-density lipoprotein, and triglycerides. RESULTS: The age-, sex-, pubertal stage-, and social class-adjusted probabilities (95% confidence interval) for being in the highest CVR score tertile at follow-up for children who had at most one (n = 48), two (n = 64), three (n = 56), four (n = 41), or five or more (n = 14) risky lifestyle factors were 15.4% (8.9-25.3), 24.3% (17.4-32.8), 36.0% (28.6-44.2), 49.8% (38.6-61.0), and 63.5% (47.2-77.2), respectively. CONCLUSIONS: Even in childhood, an accumulation of negative lifestyle factors is associated with higher CVR scores after 4 years. These negative lifestyle factors are easy to assess in clinical practice and allow early detection and prevention of CVR in childhood.

Predictors of poor response to methotrexate in polyarticular-course juvenile idiopathic arthritis: analysis of the PRINTO methotrexate trial.

OBJECTIVES: To determine whether baseline demographic, clinical, articular and laboratory variables predict methotrexate (MTX) poor response in polyarticular-course juvenile idiopathic arthritis. METHODS: Patients newly treated for 6 months with MTX enrolled in the Paediatric Rheumatology International Trials Organization (PRINTO) MTX trial. Bivariate and logistic regression analyses were used to identify baseline predictors of poor response according to the American College of Rheumatology pediatric (ACR-ped) 30 and 70 criteria. RESULTS: In all, 405/563 (71.9%) of patients were women; median age at onset and disease duration were 4.3 and 1.4 years, respectively, with anti-nuclear antibody (ANA) detected in 259/537 (48.2%) patients. With multivariate logistic regression analysis, the most important determinants of ACR-ped 70 non-responders were: disease duration > 1.3 years (OR 1.93), ANA negativity (OR 1.77), Childhood Health Assessment Questionnaire (CHAQ) disability index > 1.125 (OR 1.65) and the presence of right and left wrist activity (OR 1.55). Predictors of ACR-ped 30 non-responders were: ANA negativity (OR 1.92), CHAQ disability index > 1.14 (OR 2.18) and a parent's evaluation of child's overall well-being < or = 4.69 (OR 2.2). CONCLUSION: The subgroup of patients with longer disease duration, ANA negativity, higher disability and presence of wrist activity were significantly associated with a poorer response to a 6-month MTX course.

Official Positions for FRAX® clinical regarding rheumatoid arthritis from Joint Official Positions Development Conference of the International Society for Clinical Densitometry and International Osteoporosis Foundation on FRAX®.

Rheumatoid arthritis is the only secondary cause of osteoporosis that is considered independent of bone density in the FRAX(®) algorithm. Although input for rheumatoid arthritis in FRAX(®) is a dichotomous variable, intuitively, one would expect that more severe or active disease would be associated with a greater risk for fracture. We reviewed the literature to determine if specific disease parameters or medication use could be used to better characterize fracture risk in individuals with rheumatoid arthritis. Although many studies document a correlation between various parameters of disease activity or severity and decreased bone density, fewer have associated these variables with fracture risk. We reviewed these studies in detail and concluded that disability measures such as HAQ (Health Assessment Questionnaire) and functional class do correlate with clinical fractures but not morphometric vertebral fractures. One large study found a strong correlation with duration of disease and fracture risk but additional studies are needed to confirm this. There was little evidence to correlate other measures of disease such as DAS (disease activity score), VAS (visual analogue scale), acute phase reactants, use of non-glucocorticoid medications and increased fracture risk. We concluded that FRAX(®) calculations may underestimate fracture probability in patients with impaired functional status from rheumatoid arthritis but that this could not be quantified at this time. At this time, other disease measures cannot be used for fracture prediction. However only a few, mostly small studies addressed other disease parameters and further research is needed. Additional questions for future research are suggested.

Impact of etanercept-methotrexate therapy on patient-reported outcomes in rheumatoid arthritis patients with up to 12 months of symptoms.

Background/Purpose: Patient-reported outcomes (PROs) in patients with rheumatoid arthritis (RA) are critical in evaluating RA treatment effects on function and health-related quality of life (HR-QoL). Significant improvement in PROs has been reported in RA studies of biologic agents, including etanercept (ETN), but most studies have been conducted in patients with established disease. In addition to assessing treatment effects in early RA, there is interest in therapeutic strategies that allow dose reduction or withdrawal of biologic therapy (biologic-free) after induction of response. The PRIZE trial is an ongoing, 3-period study to evaluate the efficacy of combined ETN and methotrexate (MTX) therapy in patients with early, moderate-to-severe RA and to assess whether efficacy (remission) can be maintained with ETN dose reduction or biologic-free (Period 2) or drug-free (Period 3). Herein we report PROs associated with ETN 50 mg QW plus MTX (ETN50/MTX) therapy administered for 52 wks in Period 1 (induction) of the PRIZE trial. Methods: In Period 1, MTX- and biologic-naı‥ve patients with early, active RA (symptom onset 12 mo from enrollment; DAS28 _3.2) received open-label ETN50/MTX for 52 wks. The starting dose of MTX was 10 mg QW; at the discretion of the investigator, titration was permitted up to a maximum of 25 mg QW to achieve remission. Corticosteroid boosts were administered to patients not achieving low disease state at wks 13 and 26, unless contraindicated or not tolerated. PROs were assessed using the Health Assessment Questionnaire (HAQ) total score; Patient Acceptable Symptom State (PASS); EuroQol-5 Dimensions (EQ-5D) total index; Short Form Health Survey (SF-36); Functional Assessment of Chronic Illness Therapy (FACIT)-Fatigue; Work Instability Scale for Rheumatoid Arthritis (RAWIS); and Work Productivity and Activity Impairment Questionnaire: Rheumatoid Arthritis (WPAI:RA). Results: A total of 306 patients received treatment in Period 1 (mITT population); 222 (73%) patients completed the period. The majority of patients were female (70%), with a mean age of 50 y, mean DAS28 of 6.0 (median, 6.0), and duration of disease symptoms from onset of 6.5 months (median, 6.3 mo). Significant and clinically meaningful improvements in PROs, including in HAQ, EQ-5D, SF-36, and FACIT-Fatigue, were demonstrated with ETN50/MTX therapy from baseline to the final on therapy visit (Table; P_0.0001). Similar improvements were observed in all dimensions of RA-WIS and WPAI:RA (Table; P_0.0001). Conclusion: Combination therapy with ETN50/MTX for 52 wks in patients with _12 mo of symptomatic, active RA resulted in significant, clinically important improvements in measures of physical function, including normal HAQ (66.6% of patients), HR-QoL, fatigue, and work productivity. These outcomes are consistent with those reported in prior studies in patients with more established disease.

Increased tender point counts before and after total hip arthroplasty are associated with poorer outcomes but are not individually predictive.

In a prospective study, total hip arthroplasty (THA) patients were assessed preoperatively and postoperatively (n = 95) to determine if tender points (TPs) are associated with poor THA outcomes. Patients with high follow-up TP counts had higher visual analog scale (VAS) for pain and sleep, higher follow-up Western Ontario and McMaster Universities Arthritis Index (pain, stiffness, function), lower Health Assessment Questionnaire, Harris Hip, and Short Form 36 (physical functioning, bodily pain, physical component summary) scores. High follow-up TP were associated with increased pain, pain not relieved by surgery, poor function, and poor sleep. Visual analog scale pain and sleep, Short Form 36 (physical functioning, bodily pain), Western Ontario and McMaster Universities Arthritis Index, Health Assessment Questionnaire, and Harris hip scores improved significantly after THA; TP scores did not. Higher preoperative TP were predictive of higher follow-up TP but were poorly predictive of poor outcome measures after surgery in individual patients, suggesting that preoperative TPs are contraindicative for THA.

Barriers, benefits and preferences for exercise in RA patients: A cross sectional study.

Background/Purpose: Physical exercise is safe and effective as an adjunctive nonpharmacological treatment modality in the management of rheumatoid arthritis (RA). It is well established that patients with RA are less active compared to healthy controls. The transtheoretical model of health promotion, based on five stages of change, provides a useful framework to better understand patients' motivation towards regular exercise. The purpose of this study was to determine the distribution of exercise stages of change in a RA cohort, and to examine barriers, benefits and preferences for exercise. Methods: One hundred and twenty consecutive patients with RA followed at a hospital-based rheumatology practice were invited to participate in the study. Those who accepted to participate filled in a questionnaire to determine their exercise stage of change, their perceived benefits and barriers to exercise, and their preferences for various features of exercise. Disease activity was measured using the disease activity score (DAS28). Other variables included the Health Assessment Questionnaire (HAQ), the short version of the Arthritis Impact Measurement Scales 2 (AIMS2-SF), pain and fatigue visual analogue scales (VAS), the number of comorbidities and demographic characteristics. Characteristics of patients in the maintenance and precontemplation stages of change were compared using two-sample t tests, Wilcoxon rank-sum tests and Chi-square tests. Results: Eighty nine (74%) patients were finally included in the analyses. Mean age was 58.4 (SD 11.7) years, mean RA duration was 10.1 (9.8) years and mean DAS28 was 2.8 (1.2). The distribution of exercise stages of change was as follows: precontemplation (n_30, 34%), contemplation (n_11, 13%), preparation (n_5, 6%), action (n_2, 2%), and maintenance (n_39, 45%). Compared to patients in the maintenance stage of change, precontemplators were less often at work (P_0.05), exhibited a higher body mass index (P_0.01), poorer HAQ (P_0.01), higher pain VAS (P_0.05), poorer scores of physical (P_0.001), symptom (P_0.01), affect (P_0.01) and role (P_0.01) dimensions of the AIMS2-SF, and reported less exercise benefits (P_0.05) and more barriers to exercise (p_0.01). Most participants preferred exercising alone (40%), at home (29%), at a moderate intensity (64%), with advice provided by a rheumatologist (34%) or a specialist in exercise and RA (34%). Walking was by far the preferred type of exercise, in both the summer (86%) and the winter (51%). Conclusion: This study provides new insight into how RA interferes with exercise participation. Our cohort of patients with RA was essentially distributed across the precontemplation and maintenance exercise stages of change. These subgroups of patients exhibit psychological and functional differences that make their needs in terms of exercise counseling different. Walking appears to be a simple but promising way of promoting physical activity among RA patients.

Frailty and use of health and community services by community-dwelling older men: the Concord Health and Ageing in Men Project.

BACKGROUND: frailty is a concept used to describe older people at high risk of adverse outcomes, including falls, functional decline, hospital or nursing home admission and death. The associations between frailty and use of specific health and community services have not been investigated. METHODS: the cross-sectional relationship between frailty and use of several health and community services in the last 12 months was investigated in 1,674 community-dwelling men aged 70 or older in the Concord Health and Ageing in Men study, a population-based study conducted in Sydney, Australia. Frailty was assessed using a modified version of the Cardiovascular Health Study criteria. RESULTS: overall, 158 (9.4%) subjects were frail, 679 (40.6%) were intermediate (pre-frail) and 837 (50.0%) were robust. Frailty was associated with use of health and community services in the last 12 months, including consulting a doctor, visiting or being visited by a nurse or a physiotherapist, using help with meals or household duties and spending at least one night in a hospital or nursing home. Frail men without disability in activities of daily living were twice more likely to have seen a doctor in the previous 2 weeks than robust men (adjusted odds ratio 2.04, 95% confidence interval 1.21-3.44), independent of age, comorbidity and socio-economic status. CONCLUSION: frailty is strongly associated with use of health and community services in community-dwelling older men. The high level of use of medical services suggests that doctors and nurses could play a key role in implementation of preventive interventions.

Health literacy [Document électronique] : an economic perspective and data for Switzerland. Part 2, A review of health literacy measures and a cost assessment of limited health literacy

Summary : 1. Measuring health literacy in Switzerland: a review of six surveys: 1.1 Comparison of questionnaires - 1.2 Measures of health literacy in Switzerland - 1.3 Discussion of Swiss data on HL - 1.4 Description of the six surveys: 1.4.1 Current health trends and health literacy in the Swiss population (gfs-UNIVOX), 1.4.2 Nutrition, physical exercise and body weight : opinions and perceptions of the Swiss population (USI), 1.4.3 Health Literacy in Switzerland (ISPMZ), 1.4.4 Swiss Health Survey (SHS), 1.4.5 Survey of Health, Ageing and Retirement in Europe (SHARE), 1.4.6 Adult literacy and life skills survey (ALL). - 2 . Economic costs of low health literacy in Switzerland: a rough calculation. Appendix: Screenshots cost model

Assessment of youth-friendly health care: a systematic review of indicators drawn from young people's perspectives.

PURPOSE: To review the literature on young people's perspectives on health care with a view to defining domains and indicators of youth-friendly care. METHODS: Three bibliographic databases were searched to identify studies that purportedly measured young people's perspectives on health care. Each study was assessed to identify the constructs, domains, and indicators of adolescent-friendly health care. RESULTS: Twenty-two studies were identified: 15 used quantitative methods, six used qualitative methods and one used mixed methodology. Eight domains stood out as central to young people's positive experience of care. These were: accessibility of health care; staff attitude; communication; medical competency; guideline-driven care; age appropriate environments; youth involvement in health care; and health outcomes. Staff attitudes, which included notions of respect and friendliness, appeared universally applicable, whereas other domains, such as an appropriate environment including cleanliness, were more specific to particular contexts. CONCLUSION: These eight domains provide a practical framework for assessing how well services are engaging young people. Measures of youth-friendly health care should address universally applicable indicators of youth-friendly care and may benefit from additional questions that are specific to the local health setting.

Health effects of occupational exposure in a dairy food industry, with a specific assessment of exposure to airborne lactic acid bacteria

OBJECTIVE:: Lactic acid bacteria (LAB) are used in food industries as probiotic agents. The aim of this study is to assess the potential health effects of airborne exposure to a mix of preblend (LAB and carbohydrate) and milk powder in workers. METHODS:: A medical questionnaire, lung function tests, and immunologic tests were carried out on 50 workers. Occupational exposure to inhalable dust and airborne LAB was measured. RESULTS:: Workers not using respiratory masks reported more symptoms of irritation than workers using protection. Workers from areas with higher levels of airborne LAB reported the most health symptoms and the immune responses of workers to LAB was higher than the immune responses of a control population. CONCLUSIONS:: Measures to reduce exposure to airborne LAB and milk powder in food industries are recommended.