Donor-derived aspergillosis from use of a solid organ recipient as a multiorgan donor.

The growing need for organs and the scarcity of donors has resulted in an increased use of extended criteria donors. We report a case where a recipient of a cardiac graft was used as an organ donor. Death of the recipient occurred 9 days after transplantation and was attributed to presumed cerebral hemorrhage, which post mortem was diagnosed as invasive aspergillosis of the brain. One recipient of a kidney transplant lost the graft due to infection with Aspergillus fumigatus, whereas prompt initiation of therapy successfully prevented disseminated aspergillosis in the other recipients. Despite the pressure to extend the use of organs by lowering the acceptance criteria, organs should only be accepted if the cause of death of the donors is unequivocally explained.

A phase I dose-escalation study of the immunocytokine EMD 521873 (Selectikine) in patients with advanced solid tumours.

BACKGROUND: EMD 521873 (Selectikine), an immunocytokine comprising a DNA-targeting antibody, aimed at tumour necrosis, fused with a genetically modified interleukin-2 (IL-2) moiety, was investigated in this first-in-human phase I study. METHODS: Patients had metastatic or locally advanced solid tumours failing previous standard therapy. Selectikine was administered as a 1-hour intravenous infusion on 3 consecutive days, every 3weeks. A subgroup of patients also received 300mg/m(2) cyclophosphamide on day 1 of each cycle. Escalating doses of Selectikine were investigated with the primary objective of determining the maximum tolerated dose (MTD). RESULTS: Thirty-nine patients were treated with Selectikine alone at dose levels from 0.075 to 0.9mg/kg, and nine were treated at doses of 0.45 and 0.6mg/kg in combination with cyclophosphamide. A dose-dependent linear increase of peak serum concentrations and area under curve was found. The dose-limiting toxicity was grade 3 skin rash at the 0.9mg/kg dose-level; the MTD was 0.6mg/kg. Rash and flu-like symptoms were the most frequent side-effects. No severe cardiovascular side-effects (hypotension or vascular leak) were observed. At all dose-levels, transient increases in total lymphocyte, eosinophil and monocyte counts were recorded. No objective tumour responses, but long periods of disease stabilisation were observed. Transient and non-neutralising Selectikine antibodies were detected in 69% of patients. CONCLUSIONS: The MTD of Selectikine with or without cyclophosphamide administered under this schedule was 0.6mg/kg. The recommended phase II dose was 0.45-0.6mg/kg. Selectikine had a favourable safety profile and induced biological effects typical for IL-2.

Impact of genetic polymorphisms in cytomegalovirus glycoprotein B on outcomes in solid-organ transplant recipients with cytomegalovirus disease.

BACKGROUND:It is unknown whether specific viral polymorphisms affect in vivo therapeutic response in patients with cytomegalovirus (CMV) disease. Polymorphisms in the CMV glycoprotein B (gB) gene allow discrimination of 4 distinct genotypes (gB1-gB4). We assessed the influence of gB genotypes on the clinical and virologic outcome of CMV disease. METHODS:Solid-organ transplant recipients enrolled in a multicenter trial of CMV disease treatment (VICTOR study) were included in this study. CMV gB genotyping was performed using quantitative real-time polymerase chain reaction at day 0 (start of antiviral therapy). RESULTS:Among 239 patients with CMV disease, the prevalence of gB strain types was 26% for gB1, 10% for gB2, 10% for gB3, and 5% for gB4, whereas mixed infections were present in 49%. Donor-seropositive/recipient-seropositive patients were more likely to have mixed gB infection than donor-seropositive/recipient-seronegative patients (40% vs. 12%; P = .001). Median baseline viral loads were higher and time to viral eradication was longer ( P = .006 and P = .026 , respectively) for mixed infection versus infection with a single genotype. In a multivariate model, mixed gB infection was a significant predictor of failure to eradicate virus by day 21 (mixed vs single genotype; odds ratio, 2.66; 95% confidence interval, 1.31-5.38; P = .007 ) after controlling for baseline viral load, CMV serostatus at baseline, ganciclovir resistance, and antiviral treatment. No effect of gB genotype was seen on virologic or clinical CMV recurrence. CONCLUSIONS:No specific gB genotype appears to confer a specific CMV virulence advantage. However, mixed gB genotype infections are associated with higher viral loads and delayed viral clearance.

Design and evaluation of a solid sampler for the monitoring of airborne 1,6-hexamethylene diisocyanate (HDI) and its prepolymers in 2-component spray painting

An active, solvent-free solid sampler was developed for the collection of 1,6-hexamethylene diisocyanate (HDI) aerosol and prepolymers. The sampler was made of a filter impregnated with 1-(2-methoxyphenyl)piperazine contained in a filter holder. Interferences with HDI were observed when a set of cellulose acetate filters and a polystyrene filter holder were used; a glass fiber filter and polypropylene filter cassette gave better results. The applicability of the sampling and analytical procedure was validated with a test chamber, constructed for the dynamic generation of HDI aerosol and prepolymers in commercial two-component spray paints (Desmodur(R) N75) used in car refinishing. The particle size distribution, temporal stability, and spatial uniformity of the simulated aerosol were established in order to test the sample. The monitoring of aerosol concentrations was conducted with the solid sampler paired to the reference impinger technique (impinger flasks contained 10 mL of 0.5 mg/mL 1-(2-methoxyphenyl)piperazine in toluene) under a controlled atmosphere in the test chamber. Analyses of derivatized HDI and prepolymers were carried out by using high-performance liquid chromatography and ultraviolet detection. The correlation between the solvent-free and the impinger techniques appeared fairly good (Y = 0.979X - 0.161; R = 0.978), when the tests were conducted in the range of 0.1 to 10 times the threshold limit value (TLV) for HDI monomer and up to 60-mu-g/m3 (3 U.K. TLVs) for total -N = C = O groups.

Geometry and physics of knots

KNOTS are usually categorized in terms of topological properties that are invariant under changes in a knot's spatial configuration(1-4). Here we approach knot identification from a different angle, by considering the properties of particular geometrical forms which we define as 'ideal'. For a knot with a given topology and assembled from a tube of uniform diameter, the ideal form is the geometrical configuration having the highest ratio of volume to surface area. Practically, this is equivalent to determining the shortest piece of tube that can be closed to form the knot. Because the notion of an ideal form is independent of absolute spatial scale, the length-to-diameter ratio of a tube providing an ideal representation is constant, irrespective of the tube's actual dimensions. We report the results of computer simulations which show that these ideal representations of knots have surprisingly simple geometrical properties. In particular, there is a simple linear relationship between the length-to-diameter ratio and the crossing number-the number of intersections in a two-dimensional projection of the knot averaged over all directions. We have also found that the average shape of knotted polymeric chains in thermal equilibrium is closely related to the ideal representation of the corresponding knot type. Our observations provide a link between ideal geometrical objects and the behaviour of seemingly disordered systems, and allow the prediction of properties of knotted polymers such as their electrophoretic mobility(5).

Evaluation of oral versus intravenous dose of vinorelbine to achieve equivalent blood exposures in patients with solid tumours.

Patient's preference is for oral chemotherapy when both oral and i.v. are available, provided that efficacy is equivalent. Reliable switch from oral to i.v. is possible if correspondence between respective doses has been established. Vinorelbine oral was developed as a line extension of VRL i.v. on the basis that similar AUCs result in similar activities. From a first crossover study on 24 patients receiving VRL 25 mg/m2 i.v. and 80 mg/m2 oral data extrapolation concluded on AUCs bioequivalence between Vinorelbine 30 mg/m2 i.v. and 80 mg/m2 oral. A new trial was performed to support this calculation. In a crossover design study on patients (PS 0-1) with advanced solid tumours (44% breast carcinoma), VRL was administered (30 mg/m2 i.v., 80 mg/m2 oral) with a standard meal and 5-HT3 antagonists, at 2 weeks interval. Pharmacokinetics was performed over 168 h and VRL was measured by LC-MS/MS. Statistics included bioequivalence tests. Forty-eight patients were evaluable for PK: median age 58 years (25-71), PS0/PS1: 20/28, M/F: 11/37. Mean AUCs were 1,230 +/- 290 and 1,216 +/- 521 ng/ml for i.v. and oral, respectively. The confidence interval of the AUC ratio (0.83-1.03) was within the required regulatory range (0.8-1.25) and proved the bioequivalence between the two doses. The absolute bioavailability was 37.8 +/- 16.0%, and close to the value from the first study (40%). Patient tolerability was globally comparable between both forms with no significant difference on either haematological or non-haematological toxicities (grade 3-4). This new study, conducted on a larger population, confirmed the reliable dose correspondence previously established between vinorelbine 80 mg/m2 oral and 30 mg/m2 i.v.

A phase I study of the oral platinum agent satraplatin in sequential combination with capecitabine in the treatment of patients with advanced solid malignancies.

Abstract Background. The broad spectrum of antitumor activity of both the oral platinum analogue satraplatin (S) and capecitabine (C), along with the advantage of their oral administration, prompted a clinical study aimed to define the maximum tolerated dose (MTD) of the combination. Patients and methods. Four dose levels of S (mg/m(2)/day) and C (mg/m(2)/day) were evaluated in adult patients with advanced solid tumors: 60/1650, 80/1650, 60/2000, 70/2000; a course consisted of 28 days with sequential administration of S (days 1-5) and C (days 8-21) followed by one week rest. Results. Thirty-seven patients were treated, 24 in the dose escalation and 13 in the expansion phase; at the MTD, defined at S 70/C 2000, two patients presented dose limiting toxicities: lack of recovery of neutropenia by day 42 and nausea with dose skip of C. Most frequent toxicities were nausea (57%), diarrhea (51%), neutropenia (46%), anorexia, fatigue, vomiting (38% each). Two partial responses were observed in platinum sensitive ovarian cancer and one in prostate cancer. Conclusion. At S 70/C 2000 the combination of sequential S and C is tolerated with manageable toxicities; its evaluation in platinum and fluorouracil sensitive tumor types is worthwhile because of the easier administration and lack of nephro- and neurotoxicity as compared to parent compounds.

Dynamic visual information plays a critical role for spatial navigation in water but not on solid ground.

In the Morris water maze (MWM) task, proprioceptive information is likely to have a poor accuracy due to movement inertia. Hence, in this condition, dynamic visual information providing information on linear and angular acceleration would play a critical role in spatial navigation. To investigate this assumption we compared rat's spatial performance in the MWM and in the homing hole board (HB) tasks using a 1.5 Hz stroboscopic illumination. In the MWM, rats trained in the stroboscopic condition needed more time than those trained in a continuous light condition to reach the hidden platform. They expressed also little accuracy during the probe trial. In the HB task, in contrast, place learning remained unaffected by the stroboscopic light condition. The deficit in the MWM was thus complete, affecting both escape latency and discrimination of the reinforced area, and was thus task specific. This dissociation confirms that dynamic visual information is crucial to spatial navigation in the MWM whereas spatial navigation on solid ground is mediated by a multisensory integration, and thus less dependent on visual information.

Influenza vaccination and humoral alloimmunity in solid organ transplant recipients.

Annual influenza vaccination is recommended in solid organ transplant (SOT) recipients. However, concerns have been raised about the impact of vaccination on antigraft alloimmunity. We evaluated the humoral alloimmune responses to influenza vaccination in a cohort of SOT recipients between October 2008 and December 2011. Anti-HLA antibodies were measured before and 4-8 weeks after influenza vaccination using a solid-phase assay. Overall, 169 SOT recipients were included (kidney = 136, lung = 26, liver = 3, and combined = 4). Five (2.9%) of 169 patients developed de novo anti-HLA antibodies after vaccination, including one patient who developed donor-specific antibodies (DSA) 8 months after vaccination. In patients with pre-existing anti-HLA antibodies, median MFI was not significantly different before and after vaccination (P = 0.73 for class I and P = 0.20 for class II anti-HLA antibodies) and no development of de novo DSA was observed. Five episodes of rejection (2.9%) were observed within 12 months after vaccination, and only one patient had de novo anti-HLA antibodies. The incidence of development of anti-HLA antibodies after influenza vaccination in our cohort of SOT recipients was very low. Our findings indicate that influenza vaccination is safe and does not trigger humoral alloimmune responses in SOT recipients.

Solid phase microextraction as a short-term sampling technique for BTEX occupational exposure

Solid phase microextraction (SPME) has been widely used for many years in various applications, such as environmental and water samples, food and fragrance analysis, or biological fluids. The aim of this study was to suggest the SPME method as an alternative to conventional techniques used in the evaluation of worker exposure to benzene, toluene, ethylbenzene, and xylene (BTEX). Polymethylsiloxane-carboxen (PDMS/CAR) showed as the most effective stationary phase material for sorbing BTEX among other materials (polyacrylate, PDMS, PDMS/divinylbenzene, Carbowax/divinylbenzene). Various experimental conditions were studied to apply SPME to BTEX quantitation in field situations. The uptake rate of the selected fiber (75 microm PDMS/CAR) was determined for each analyte at various concentrations, relative humidities, and airflow velocities from static (calm air) to dynamic (> 200 cm/s) conditions. The SPME method also was compared with the National Institute of Occupational Safety and Health method 1501. Unlike the latter, the SPME approach fulfills the new requirement for the threshold limit value-short term exposure limit (TLV-STEL) of 2.5 ppm for benzene (8 mg/m(3))

Geometry and physics of catenanes applied to the study of DNA replication.

The concept of ideal geometric configurations was recently applied to the classification and characterization of various knots. Different knots in their ideal form (i.e., the one requiring the shortest length of a constant-diameter tube to form a given knot) were shown to have an overall compactness proportional to the time-averaged compactness of thermally agitated knotted polymers forming corresponding knots. This was useful for predicting the relative speed of electrophoretic migration of different DNA knots. Here we characterize the ideal geometric configurations of catenanes (called links by mathematicians), i.e., closed curves in space that are topologically linked to each other. We demonstrate that the ideal configurations of different catenanes show interrelations very similar to those observed in the ideal configurations of knots. By analyzing literature data on electrophoretic separations of the torus-type of DNA catenanes with increasing complexity, we observed that their electrophoretic migration is roughly proportional to the overall compactness of ideal representations of the corresponding catenanes. This correlation does not apply, however, to electrophoretic migration of certain replication intermediates, believed up to now to represent the simplest torus-type catenanes. We propose, therefore, that freshly replicated circular DNA molecules, in addition to forming regular catenanes, may also form hemicatenanes.

On the origin of the ultradeep East Barents Sea basin

Very large subsidence, with up to 20 km thick sediment layers, is observed in the East Barents Sea basin. Subsidence started in early Paleozoic, accelerated in Permo-Triassic times, finished during the middle Cretaceous, and was followed by moderate uplift in Cenozoic times. The observed gravity signal suggests that the East Barents Sea is at present in isostatic balance and indicates that a mass excess is required in the lithosphere to produce the observed large subsidence. Several origins have been proposed for the mass excess. We use 1-D thermokinematic modeling and 2-D isostatic density models of continental lithosphere to evaluate these competing hypotheses. The crustal density in 2-D thermokinematic models resulting from pressure-, temperature-, and composition-dependent phase change models is computed along transects crossing the East Barents Sea. The results indicate the following. (1) Extension can only explain the observed subsidence provided that a 10 km thick serpentinized mantle lens beneath the basin center is present. We conclude that this is unlikely given that this highly serpentinized layer should be formed below a sedimentary basin with more than 10 km of sediments and crust at least 10 km thick. (2) Phase changes in a compositionally homogeneous crust do not provide enough mass excess to explain the present-day basin geometry. (3) Phase change induced densification of a preexisting lower crustal gabbroic body, interpreted as a mafic magmatic underplate, can explain the basin geometry and observed gravity anomalies. The following model is proposed for the formation of the East Barents Sea basin: (1) Devonian rifting and extension related magmatism resulted in moderate thinning of the crust and a mafic underplate below the central basin area explaining initial late Paleozoic subsidence. (2) East-west shortening during the Permian and Triassic resulted in densification of the previously emplaced mafic underplated body and enhanced subsidence dramatically, explaining the present-day deep basin geometry.