Construction mechanisms and thermal evolution of upper crustal intrusions : the Saint-Jean-du-Doigt bimodal intrusion (Brittany, France)

Understanding the emplacement and growth of intrusive bodies in terms of mechanism, duration, ther¬mal evolution and rates are fundamental aspects of crustal evolution. Recent studies show that many plutons grow in several Ma by in situ accretion of discrete magma pulses, which constitute small-scale magmatic reservoirs. The residence time of magmas, and hence their capacities to interact and differentiate, are con¬trolled by the local thermal environment. The latter is highly dependant on 1) the emplacement depth, 2) the magmas and country rock composition, 3) the country rock thermal conductivity, 4) the rate of magma injection and 5) the geometry of the intrusion. In shallow level plutons, where magmas solidify quickly, evi¬dence for magma mixing and/or differentiation processes is considered by many authors to be inherited from deeper levels. This work shows however that in-situ differentiation and magma interactions occurred within basaltic and felsic sills at shallow depth (0.3 GPa) in the St-Jean-du-Doigt (SJDD) bimodal intrusion, France. This intrusion emplaced ca. 347 Ma ago (IDTIMS U/Pb on zircon) in the Precambrian crust of the Armori- can massif and preserves remarkable sill-like emplacement processes of bimodal mafic-felsic magmas. Field evidence coupled to high precision zircon U-Pb dating document progressive thermal maturation within the incrementally built ioppolith. Early m-thick mafic sills (eastern part) form the roof of the intrusion and are homogeneous and fine-grained with planar contacts with neighboring felsic sills; within a minimal 0.8 Ma time span, the system gets warmer (western part). Sills are emplaced by under-accretion under the old east¬ern part, interact and mingle. A striking feature of this younger, warmer part is in-situ differentiation of the mafic sills in the top 40 cm of the layer, which suggests liquids survival in the shallow crust. Rheological and thermal models were performed in order to determine the parameters required to allow this observed in- situ differentiation-accumulation processes. Strong constraints such as total emplacement durations (ca. 0.8 Ma, TIMS date) and pluton thickness (1.5 Km, gravity model) allow a quantitative estimation of the various parameters required (injection rates, incubation time,...). The results show that in-situ differentiation may be achieved in less than 10 years at such shallow depth, provided that: (1) The differentiating sills are injected beneath consolidated, yet still warm basalt sills, which act as low conductive insulating screens (eastern part formation in the SJDD intrusion). The latter are emplaced in a very short time (800 years) at high injection rate (0.5 m/y) in order to create a "hot zone" in the shallow crust (incubation time). This implies that nearly 1/3 of the pluton (400m) is emplaced by a subsequent and sustained magmatic activity occurring on a short time scale at the very beginning of the system. (2) Once incubation time is achieved, the calculations show that a small hot zone is created at the base of the sill pile, where new injections stay above their solidus T°C and may interact and differentiate. Extraction of differentiated residual liquids might eventually take place and mix with newly injected magma as documented in active syn-emplacement shear-zones within the "warm" part of the pluton. (3) Finally, the model show that in order to maintain a permanent hot zone at shallow level, injection rate must be of 0.03 m/y with injection of 5m thick basaltic sills eveiy 130yr, imply¬ing formation of a 15 km thick pluton. As this thickness is in contradiction with the one calculated for SJDD (1.5 Km) and exceed much the average thickness observed for many shallow level plutons, I infer that there is no permanent hot zone (or magma chambers) at such shallow level. I rather propose formation of small, ephemeral (10-15yr) reservoirs, which represent only small portions of the final size of the pluton. Thermal calculations show that, in the case of SJDD, 5m thick basaltic sills emplaced every 1500 y, allow formation of such ephemeral reservoirs. The latter are formed by several sills, which are in a mushy state and may interact and differentiate during a short time.The mineralogical, chemical and isotopic data presented in this study suggest a signature intermediate be¬tween E-MORB- and arc-like for the SJDD mafic sills and feeder dykes. The mantle source involved produced hydrated magmas and may be astenosphere modified by "arc-type" components, probably related to a sub¬ducting slab. Combined fluid mobile/immobile trace elements and Sr-Nd isotopes suggest that such subduc¬tion components are mainly fluids derived from altered oceanic crust with minor effect from the subducted sediments. Close match between the SJDD compositions and BABB may point to a continental back-arc setting with little crustal contamination. If so, the SjDD intrusion is a major witness of an extensional tectonic regime during the Early-Carboniferous, linked to the subduction of the Rheno-Hercynian Ocean beneath the Variscan terranes. Also of interest is the unusual association of cogenetic (same isotopic compositions) K-feldspar A- type granite and albite-granite. A-type granites may form by magma mixing between the mafic magma and crustal melts. Alternatively, they might derive from the melting of a biotite-bearing quartz-feldspathic crustal protolith triggered by early mafic injections at low crustal levels. Albite-granite may form by plagioclase cu¬mulate remelting issued from A-type magma differentiation.

Programme cantonal Diabète: bilan de la première phase du programme (2010-2011) et construction d'une théorie d'action.

Le Programme cantonal diabète (PCD) du canton de Vaud a pour objectifs de réduire durablement l'impact du diabète sur la population vaudoise. Il a été élaboré à l'initiative du Service de la santé publique du canton de Vaud et la stratégie du programme a été construite sur la base des propositions de plusieurs groupes de travail. Ce programme inclut divers projets complémentaires qui ont été progressivement mis sur pied à partir de 2010. 2012 marque la fin de la première phase du programme et une évaluation-bilan du programme est demandée. Cette évaluation-bilan fait suite à une première phase de travaux qui ont consisté en une évaluation de l'évaluabilité du programme. Les résultats de cette première phase ont été délivrés en décembre 2011 au groupe de pilotage et consignés dans un rapport en février 2012. L'IUMSP propose donc pour 2012 des travaux en continuité de ce qui a été fait en 2011 et qui vont dans le sens d'un bilan critique et de propositions pour un système de monitoring à long terme du programme, comportant des indicateurs d'activité (à harmoniser lorsque c'est possible dans des projets similaires), des indicateurs de couverture et de résultats. [p. 7]

La participation des consommateurs à la construction de l'autorité des normes internationales : vers une économie politique internationale de la traduction

Cette thèse explore les implications politiques de la montée en puissance des normes internationales sur nos sociétés contemporaines et pose la problématique des dynamiques participatives des représentants des consommateurs au sein des formes de pouvoir non étatique à l'aide du cas de l'Organisation internationale de normalisation (ISO). Le renforcement du pouvoir des normes internationales et autres spécifications techniques soulève d'importants enjeux démocratiques qui portent aussi bien sur la représentativité des acteurs qui les élaborent, sur l'articulation des prérogatives publiques et privées dans la gouvernance de la mondialisation, que sur le rôle de l'expertise dans la reconnaissance de ces nouvelles formes de pouvoir. La participation du monde associatif intervient sur ces différents enjeux de manière complexe. Cette recherche s'inscrit à la suite des études en relations internationales/économie politique internationale sur les formes d'autorité non étatique et s'inspire du concept de traduction issu de la sociologie des sciences et techniques pour mettre en lumière le rôle des spécifications techniques dans la construction d'une société de consommation centrée sur la liberté de choix et la façon dont les associations de consommateurs se saisissent des arènes de normalisation pour y faire valoir des préoccupations collectives, leur expertise et leur identité. Cette thèse défend l'idée que les consommateurs participent à la construction de l'autorité des normes internationales par leur rôle dans la traduction qui permet de relier les spécifications techniques au fonctionnement des marchés, au cadre réglementaire de la loi et aux préoccupations sociétales. L'analyse repose sur une observation ethnographique des délibérations d'un comité technique de l'ISO, une recherche-­‐action, la réalisation d'entretiens et la consultation de documents d'archives de l'ISO. -- This thesis explores the political significance of the rise of international standards on contemporary societies and questions the participatory dynamics of consumers' representatives within nonstate forms of power, using the case of the International organization for standardization (ISO). The power granted to international standards and other technical specifications raises important democratic issues regarding the representativity of standard-­‐ writers, the public-­‐private relationships involved in this form of governance or the expertise sustaining the recognition of such new forms of power. The participation of civil society associations affect such issues in complex ways. This research relies on international relations/international political economy approaches of nonstate authority and takes inspiration from the concept of translation developed by science and technology studies to highlight the crucial role played by technical specifications in building a consumer society based on the freedom of choice as well as how consumers' associations take stock of standardization arenas to promote collective issues and claim their expertise and identity. This thesis argues that consumers contribute to the construction of the authority of international standards through their role in the translation that links international standards to the market society, the regulatory state as well as to societal preoccupation. The analysis is based on an ethnographic observation of deliberations within an ISO technical committee, a research-­‐action, interviews as well as on the consultation of ISO archives.