Micronucleus test on Triturus carnifex as a tool for environmental biomonitoring.

The amphibian micronucleus test has been widely used during the last 30 years to test the genotoxic properties of several chemicals and as a tool for ecogenotoxic monitoring. The vast majority of these studies were performed on peripheral blood of urodelan larvae and anuran tadpoles and to a lesser extent adults were also used. In this study, we developed protocols for measuring micronuclei in adult shed skin cells and larval gill cells of the Italian crested newt (Triturus carnifex). Amphibians were collected from ponds in two protected areas in Italy that differed in their radon content. Twenty-three adult newts and 31 larvae were captured from the radon-rich pond, while 20 adults and 27 larvae were taken from the radon-free site. The animals were brought to the laboratory and the micronucleus test was performed on peripheral blood and shed skins taken from the adults and on larval gills. Samples from the radon-rich site showed micronucleus frequencies higher than those from the radon-free site and the difference was statistically significant in gill cells (P < 0.00001). Moreover, the larval gills seem to be more sensitive than the adult tissues. This method represents an easy (and noninvasive in the case of the shed skin) application of the micronucleus assay that can be useful for environmental studies in situ. Environ. Mol. Mutagen. 56:412-417, 2015. © 2014 Wiley Periodicals, Inc.

3D geoelectrical monitoring to follow hydric soil behaviour during rainfall

RESUME Durant les dernières années, les méthodes électriques ont souvent été utilisées pour l'investigation des structures de subsurface. L'imagerie électrique (Electrical Resistivity Tomography, ERT) est une technique de prospection non-invasive et spatialement intégrée. La méthode ERT a subi des améliorations significatives avec le développement de nouveaux algorithmes d'inversion et le perfectionnement des techniques d'acquisition. La technologie multicanale et les ordinateurs de dernière génération permettent la collecte et le traitement de données en quelques heures. Les domaines d'application sont nombreux et divers: géologie et hydrogéologie, génie civil et géotechnique, archéologie et études environnementales. En particulier, les méthodes électriques sont souvent employées dans l'étude hydrologique de la zone vadose. Le but de ce travail est le développement d'un système de monitorage 3D automatique, non- invasif, fiable, peu coûteux, basé sur une technique multicanale et approprié pour suivre les variations de résistivité électrique dans le sous-sol lors d'événements pluvieux. En raison des limitations techniques et afin d'éviter toute perturbation physique dans la subsurface, ce dispositif de mesure emploie une installation non-conventionnelle, où toutes les électrodes de courant sont placées au bord de la zone d'étude. Le dispositif le plus approprié pour suivre les variations verticales et latérales de la résistivité électrique à partir d'une installation permanente a été choisi à l'aide de modélisations numériques. Les résultats démontrent que le dispositif pôle-dipôle offre une meilleure résolution que le dispositif pôle-pôle et plus apte à détecter les variations latérales et verticales de la résistivité électrique, et cela malgré la configuration non-conventionnelle des électrodes. Pour tester l'efficacité du système proposé, des données de terrain ont été collectées sur un site d'étude expérimental. La technique de monitorage utilisée permet de suivre le processus d'infiltration 3D pendant des événements pluvieux. Une bonne corrélation est observée entre les résultats de modélisation numérique et les données de terrain, confirmant par ailleurs que le dispositif pôle-dipôle offre une meilleure résolution que le dispositif pôle-pôle. La nouvelle technique de monitorage 3D de résistivité électrique permet de caractériser les zones d'écoulement préférentiel et de caractériser le rôle de la lithologie et de la pédologie de manière quantitative dans les processus hydrologiques responsables d'écoulement de crue. ABSTRACT During the last years, electrical methods were often used for the investigation of subsurface structures. Electrical resistivity tomography (ERT) has been reported to be a useful non-invasive and spatially integrative prospecting technique. The ERT method provides significant improvements, with the developments of new inversion algorithms, and the increasing efficiency of data collection techniques. Multichannel technology and powerful computers allow collecting and processing resistivity data within few hours. Application domains are numerous and varied: geology and hydrogeology, civil engineering and geotechnics, archaeology and environmental studies. In particular, electrical methods are commonly used in hydrological studies of the vadose zone. The aim of this study was to develop a multichannel, automatic, non-invasive, reliable and inexpensive 3D monitoring system designed to follow electrical resistivity variations in soil during rainfall. Because of technical limitations and in order to not disturb the subsurface, the proposed measurement device uses a non-conventional electrode set-up, where all the current electrodes are located near the edges of the survey grid. Using numerical modelling, the most appropriate arrays were selected to detect vertical and lateral variations of the electrical resistivity in the framework of a permanent surveying installation system. The results show that a pole-dipole array has a better resolution than a pole-pole array and can successfully follow vertical and lateral resistivity variations despite the non-conventional electrode configuration used. Field data are then collected at a test site to assess the efficiency of the proposed monitoring technique. The system allows following the 3D infiltration processes during a rainfall event. A good correlation between the results of numerical modelling and field data results can be observed since the field pole-dipole data give a better resolution image than the pole-pole data. The new device and technique makes it possible to better characterize the zones of preferential flow and to quantify the role of lithology and pedology in flood- generating hydrological processes.

Groundwater dating and past climate reconstruction

In the past decade aquifers have increasingly become palaeoclimatic archives in their own right alongside ice cores, sediments and other proxy records. The main tool for this task has been the noble gas palaeo-thermometer in combination with quantitative groundwater dating using radionuclides. Noblegas radionuclides play a unique role as tracers in environmental studies due to their chemical inertness and low concentration making them ideal tracers. The same properties on the other hand make them difficult to measure on natural concentration levels. Therefore for decades low level counting (LLC) was the only method for detecting radioisotopes of argon and krypton at an atmospheric level. In recent times and with the increase of interest and potential applications the analytical efforts with novel detection methods have been intensified. In the talk noble gas groundwater dating techniques over times scales from decades to millions of years are discussed in relation to noble gas palaeo records at different locations in Europe and elsewhere.

10

The stable isotope composition of ostracod fossils is useful for palaeoenvironmental reconstruction. Laboratory as well as 'natural environment' cultures demonstrate that the carbon and oxygen isotope compositions of ostracod shells faithfully record the environmental conditions at the time of valve precipitation. Oxygen isotope composition of ostracod calcite reflects the composition and temperature of the host water, but ostracod shells are enriched in 18O compared to the value expected for inorganic calcite precipitating under equilibrium under the same conditions. This 'vital effect' is generally constant for closely related species and equals 1.5 to 3 0/00 for Candoninae, 0 to 2.5 0/00 for Cyprididae and 0.8 to 1.5 0/00 for Cytheroidea. The carbon isotope composition of ostracod calcite is controlled by a complex interaction between the ecology of the species and environmental parameters. Previous natural environmental studies suggest that many (but not all) taxa crystallize their shells in or very close to equilibrium with the carbon isotope composition of dissolved inorganic carbon, and that the composition of littoral, epifaunal species reflects seasonal variation in the carbon isotope composition of dissolved inorganic carbon of bottom water according to their life cycles, while that of deep-water, infaunal species reflects the variation interstitial pore water according to microhabitat preferences.

Geochemical evolution of active porphyry copper tailings impoundments : from alkaline deposition towards acidification

J. Smuda: Geochemical evolution of active porphyry copper tailings impoundments Thesis abstract Mine waste is the largest volume of materials handled in the world. The oxidation of sulfidic mine waste may result in the release of acid mine drainage (AMD) rich in heavy metals and arsenic to the environment, one of the major problems the mining industry is facing today. To control and reduce this environmental impact, it is crucial to identify the main geochemical and hydrological processes influencing contaminant liberation, transport, and retention. This thesis presents the results of a geochemical, mineralogical and stable isotope study (δ2H, δ18O, δ34S) from two active porphyry copper tailings impoundments in Mediterranean (Carén tailings impoundment, El Teniente mine, Central Chile) and hyper-arid climate (Talabre tailings impoundment, Chuquicamata, Northern Chile) from the deposition in alkaline environment (pH 10.5) towards acidification after several years of exposure. The major hydrological results were the identification of vertical contaminant and water transport in the uppermost, not water-saturated zone, triggered by capillary rise due to evaporation, and infiltration downwards due to new tailings deposition, and of horizontal transport in the groundwater zone. At the surface of the sedimented tailings, evaporation of pore water led to the precipitation of Na-Ca-Mg sulfates (e.g., gypsum, tenorite), in hyper-arid climate also halite. At the Carén tailings impoundment, renewed deposition in a 4-week interval inhibited a pH decrease below neutral values and the formation of an efflorescent salt crust. At the Talabre tailings impoundment, deposition breaks of several years resulted in the formation of acidic oxidation zones in the timeframe of less than 4 years. This process enabled the transport of liberated Cu, Zn, and Fe via capillary rise to the surface, where these metals precipitated as heavy-metal sulfates (e.g., devilline, krohnkite) and chlorides (eriochalcite, atacamite). Renewed depositing may dissolve efflorescent salts and transport liberated elements towards the groundwater zone. This zone was found to be highly dynamic due to infiltration and mixing with water from different sources, like groundwater, catchment water, and infiltration from superficial waters. There, Cu was found to be partially mobile due to complexation with Cl (in Cl-rich groundwater, Talabre) and dissolved organic matter (in zones with infiltration of catchment water rich in dissolved organic matter, Carén). A laboratory study on the isotopic fractionation of sulfur and oxygen of sulfate in different minerals groups (water-soluble sulfates, low- and high-crystalline Fe(III) oxyhydroxides) contributed to the use of stable isotopes as tracer of geochemical and transport processes for environmental studies. The results highlight that a detailed geochemical, stable isotope and mineralogical study permits the identification of contamination processes and pathways already during the deposition of mine tailings. This knowledge allows the early planning of adequate actions to reduce and control the environmental impact during tailings deposition and after the closing of the impoundment. J. Smuda: Geochemical evolution of active porphyry copper tailings impoundments Résumé de these Les déchets miniers constituent les plus grands volumes de matériel gérés dans le monde. L'oxydation des déchets miniers sulfuriques peut conduire à la libération de drainages miniers acides (DMA) riches en métaux et arsenic dans l'environnement, ce qui est l'un des principaux problèmes de l'industrie minière aujourd'hui. Pour contrôler et réduire ces impacts sur l'environnement, il est crucial d'identifier les principaux processus géochimiques et hydrologiques influençant la libération, le transport et la rétention des contaminants. Cette thèse présente les résultats d'une étude géochimique, minéralogique et des isotopes stables (δ2H, δ18O, δ34S) sur des déchets miniers de 2 sites de dépôt actifs en climat méditerranéen (Dépôt de déchets de Carén, mine de El Teniente, Centre du Chili) et en climat hyper-aride (Dépôt de déchets de Talabre, mine de Chuquicamata, Nord du Chili). L'objectif était d'étudier l'évolution des déchets de la déposition en milieu alcalin (pH = 10.5) vers l'acidification après plusieurs années d'exposition. Le principal résultat hydrologique a été l'identification de 2 types de transport : un transport vertical de l'eau et des contaminants dans la zone non saturée en surface, induit par la montée capillaire due à l'évaporation et par l'infiltration subséquente de la déposition de sédiments frais ; et un transport horizontal dans la zone des eaux souterraines. À la surface des déchets, l'évaporation de l'eau interstitielle conduit à la précipitation de sulfates de Na-Ca-Mg (ex. gypse, ténorite) et halite en climat hyper-aride. Dans le site de Carén, une nouvelle déposition de déchets frais à 4 semaines intervalle a empêché la baise du pH en deçà des valeurs neutres et la formation d'une croûte de sels efflorescentes en surface. Dans le site de Talabre, les fentes de dessiccation des dépôts ont entraîné la formation d'une zone d'oxydation à pH acide en moins de 4 ans. Ce processus a permis la libération et le transport par capillarité de Cu, Zn, Fe vers la surface, où ces éléments précipitent sous forme de sulfates de métaux lourds (ex., dévilline, krohnkite) de chlorures (ex. ériochalcite, atacamite). Une nouvelle déposition de sédiments frais pourrait dissoudre ces sels et les transporter vers la zone des eaux souterraines. Cette dernière zone était très dynamique en raison du mélange d'eaux provenant de différentes sources, comme les eaux souterraines, l'eau de captage et l'infiltration des eaux superficielles. Egalement dans cette zone, le cuivre était partiellement mobile à cause de la formation de complexe avec le chlore (dans les zone riche en Cl, Talabre) et avec la matière organique dissoute (dans les zones où s'infiltre l'eau de captage riche en matière organique, Carén). Une étude en laboratoire sur le fractionnement des isotopes stables de sulfure et d'oxygène des sulfates dans différents groupes de minéraux (sulfates hydrosolubles, sulfures de oxy-hydroxyde de Fe(III) faiblement ou fortement cristallins) a permis d'apporter une contribution à leur utilisation comme traceurs dans l'étude des processus géochimiques et de transport lors d'études environnementales. Les résultats montrent qu'une étude détaillée de la géochimie, des isotopes stables et de la minéralogie permet d'identifier les processus et les voies de contamination déjà pendant la période de dépôt des déchets miniers. Cette connaissance permet de planifier, dès le début de l'exploitation, des mesures adéquates pour réduire et contrôler l'impact sur l'environnement pendant la période de dépôts de déchets miniers et après la fermeture du site.

Origin of cadmium enrichments in carbonate rocks deposited in the Alpine Tethys area during the Middle-Late Jurassic

ABSTRACTThe pollution of air, soil and water by heavy metals through anthropogenic activities is an object of numerous environmental studies since long times. A number of natural processes, such as volcanic activity, hydrothermal fluid circulation and weathering of metal-rich deposits may lead to an additional and potentially important input and accumulation of heavy metals in the environment. In the Swiss and French Jura Mountains, anomalous high cadmium (Cd) concentrations (up to 16 ppm) in certain soils are related to the presence of underlying Cd-enriched (up to 21 ppm) carbonate rocks of Middle to Late Jurassic age. The aim of this study is to understand the processes controlling Cd incorporation into carbonate rocks of Middle and Late Jurassic age and to reconstruct the sedimentary and environmental conditions, which have led to Cd enrichments in these sedimentary rocks.Cd concentrations in studied hemipelagic sections in France vary between 0.1 and 0.5 ppm (mean 0.15 ppm). Trace-element behavior and high Mn concentrations suggest that sediment accumulation occurred in a well-oxygenated environment. Increases in Cd contents in the bulk-rock carbonate sediments may be related to increases in surface-water productivity under oxic conditions and important remineralization of organic matter within the water column. In platform settings preserved in the Swiss Jura Mountains, no correlation is observed between Cd contents and evolution of environmental conditions. Cd concentrations in these platform sections are often below the detection limit, with isolated peaks of up to 21 ppm. These important Cd enrichments are associated with peaks in Zn concentrations and are present in carbonate rocks independently of facies and age. The high Cd contents in these shallow-water carbonate rocks are partly related to the presence of disseminated, Cd-rich (up to 1.8%), sphalerite (ZnS) mineralization. The basement rocks are considered to be the source of metals for sulfide mineralization in the overlying Jurassic strata, as the sphalerite Pb isotope pattern is comparable to that of granite rocks from the nearby southern Black Forest crystalline massif. The Rb-Sr ages of sphalerite samples indicate that a main phase of sphalerite formation occurred near the boundary between the late Middle and early Late Jurassic, at around 162 Ma, as a result of enhanced tectonic and hydrothermal activity in Europe, related to the opening of the Central Atlantic and to the tectonic/thermal subsidence during spreading of the Alpine Tethys. I therefore propose to use unusually high Cd concentrations in carbonates as a tracer of tectonic activity in the Jura Mountains area, especially in the case when important enrichments in Zn co-occur. Paleoproductivity reconstructions based on records of authigenic Cd may be compromised not only by post-depositional redistribution, but also by incorporation of additional Cd from hydrothermal solutions circulating in the rock.The circulation of metal-rich hydrothermal fluids through the sediment sequence, in addition to specific environmental conditions during sedimentation, contributes to the incorporation of Cd into the carbonate rocks. However, only hydrothermal activity has led to the unusually high concentrations of Cd in carbonate rocks of Bajocian-Oxfordian age, through the formation of sphalerite mineralization.