In vitro engineering of human stratified urothelium: analysis of its morphology and function.

PURPOSE: Gastric or intestinal patches, commonly used for reconstructive cystoplasty, may induce severe metabolic complications. The use of bladder tissues reconstructed in vitro could avoid these complications. We compared cellular differentiation and permeability characteristics of human native with in vitro cultured stratified urothelium. MATERIALS AND METHODS: Human stratified urothelium was induced in vitro. Morphology was studied with light and electron microscopy and expression of key cellular proteins was assessed using immunohistochemistry. Permeability coefficients were determined by measuring water, urea, ammonia and proton fluxes across the urothelium. RESULTS: As in native urothelium the stratified urothelial construct consisted of basal membrane and basal, intermediate and superficial cell layers. The apical membrane of superficial cells formed villi and glycocalices, and tight junctions and desmosomes were developed. Immunohistochemistry showed similarities and differences in the expression of cytokeratins, integrin and cellular adhesion proteins. In the cultured urothelium cytokeratin 20 and integrin subunits alpha6 and beta4 were absent, and symplekin was expressed diffusely in all layers. Uroplakins were clearly expressed in the superficial umbrella cells of the urothelial constructs, however, they were also present in intermediate and basal cells. Symplekin and uroplakins were expressed only in the superficial cells of native bladder tissue. The urothelial constructs showed excellent viability, and functionally their permeabilities for water, urea and ammonia were no different from those measured in native human urothelium. Proton permeability was even lower in the constructs compared to that of native urothelium. CONCLUSIONS: Although the in vitro cultured human stratified urothelium did not show complete terminal differentiation of its superficial cells, it retained the same barrier characteristics against the principal urine components. These results indicate that such in vitro cultured urothelium, after being grown on a compliant degradable support or in coculture with smooth muscle cells, is suitable for reconstructive cystoplasty.

Translation of biomechanical concepts in bone tissue engineering: from animal study to revision knee arthroplasty.

Bone defects in revision knee arthroplasty are often located in load-bearing regions. The goal of this study was to determine whether a physiologic load could be used as an in situ osteogenic signal to the scaffolds filling the bone defects. In order to answer this question, we proposed a novel translation procedure having four steps: (1) determining the mechanical stimulus using finite element method, (2) designing an animal study to measure bone formation spatially and temporally using micro-CT imaging in the scaffold subjected to the estimated mechanical stimulus, (3) identifying bone formation parameters for the loaded and non-loaded cases appearing in a recently developed mathematical model for bone formation in the scaffold and (4) estimating the stiffness and the bone formation in the bone-scaffold construct. With this procedure, we estimated that after 3 years mechanical stimulation increases the bone volume fraction and the stiffness of scaffold by 1.5- and 2.7-fold, respectively, compared to a non-loaded situation.

Combining geophysical and laboratory measurements for civil Engineering.

The study of wave propagation at sonic frequency in soil leads to elasticity parameter determination. These parameters are compatible to those measured simultaneously by static loading. The acquisition of in situ elasticity parameter combined with laboratory description of the elastoplastic behaviour can lead to in situ elastoplastic curves. - L'étude de la propagation des ondes acoustiques permet la détermination des paramètres d'élasticité dans les sols. Ces paramètres sont cohérents avec des mesures statiques simultanées. L'acquisition des paramètres d'élasticité in situ associée à une description du comportement élasto-plastique mesuré en laboratoire permet d'obtenir des courbes d'élastoplasticité in situ.

Engineering, conjugation, and immunogenicity assessment of Escherichia coli O121 O antigen for its potential use as a typhoid vaccine component.

State-of-the-art production technologies for conjugate vaccines are complex, multi-step processes. An alternative approach to produce glycoconjugates is based on the bacterial N-linked protein glycosylation system first described in Campylobacter jejuni. The C. jejuni N-glycosylation system has been successfully transferred into Escherichia coli, enabling in vivo production of customized recombinant glycoproteins. However, some antigenic bacterial cell surface polysaccharides, like the Vi antigen of Salmonella enterica serovar Typhi, have not been reported to be accessible to the bacterial oligosaccharyltransferase PglB, hence hamper development of novel conjugate vaccines against typhoid fever. In this report, Vi-like polysaccharide structures that can be transferred by PglB were evaluated as typhoid vaccine components. A polysaccharide fulfilling these requirements was found in Escherichia coli serovar O121. Inactivation of the E. coli O121 O antigen cluster encoded gene wbqG resulted in expression of O polysaccharides reactive with antibodies raised against the Vi antigen. The structure of the recombinantly expressed mutant O polysaccharide was elucidated using a novel HPLC and mass spectrometry based method for purified undecaprenyl pyrophosphate (Und-PP) linked glycans, and the presence of epitopes also found in the Vi antigen was confirmed. The mutant O antigen structure was transferred to acceptor proteins using the bacterial N-glycosylation system, and immunogenicity of the resulting conjugates was evaluated in mice. The conjugate-induced antibodies reacted in an enzyme-linked immunosorbent assay with E. coli O121 LPS. One animal developed a significant rise in serum immunoglobulin anti-Vi titer upon immunization.

Self-reported health needs and use of primary health care services by adolescents enrolled in post-mandatory schools or vocational training programmes in Switzerland.

BACKGROUND: The second Swiss Multicenter Adolescent Survey on Health (SMASH02) was conducted among a representative sample (n = 7428) of students and apprentices aged 16 to 20 from the three language areas of Switzerland during the year 2002. This paper reports on health needs expressed by adolescents and their use of health care services over the 12 months preceding the survey. METHODS: Nineteen cantons representing 80% of the resident population agreed to participate. A complex iterative random cluster sample of 600 classes was drawn with classes as primary sampling unit. The participation rate was 97.7% for the classes and 99.8% for the youths in attendance. The self-administered questionnaire included 565 items. The median rate of item non-response was 1.8%. Ethical and legal requirements applying to surveys of adolescent populations were respected. RESULTS: Overall more than 90% of adolescents felt in good to excellent health. Suffering often or very often from different physical complaints or pain was also reported such as headache (boys: 15.9%, girls: 37.4%), stomach-ache (boys: 9.7%, girls: 30.0%), joint pain (boys: 24.7%, girls: 29.5%) or back pain (boys: 24.3%, girls: 34.7%). Many adolescents reported a need for help on psychosocial and lifestyle issues, such as stress (boys: 28.5%, girls: 47.7%) or depression (boys: 18.9%, girls: 34.4%). Although about 75% of adolescents reported having consulted a general practitioner and about one-third having seen another specialist, reported reasons for visits do not correspond to the expressed needs. Less than 10% of adolescents had visited a psychiatrist, a family planning centre or a social worker. CONCLUSIONS: The reported rates of health services utilisation by adolescents does not match the substantial reported needs for help in various areas. This may indicate that the corresponding problems are not adequately detected and/or addressed by professionals from the health and social sectors.

Bone tissue engineering using foetal cell therapy.

Different cell sources for bone tissue engineering are reviewed. In particular, adult cell source strategies have been based on the implantation of unfractionated fresh bone marrow; purified, culture expanded mesenchymal stem cells, differentiated osteoblasts, or cells that have been modified genetically to express rhBMP. Several limiting factors are mentioned for these strategies such as low number of available cells or possible immunological reaction of the host. Foetal bone cells are presented as an alternative solution and review of actual treatments using these cells is presented. Finally, foetal cells used specifically for bone tissue engineering are characterised and potentially interesting therapeutic options are proposed.

Determinants of school efficiency : The case of primary schools in the State of Geneva, Switzerland

The public primary school system in the State of Geneva, Switzerland, is characterized by centrally evaluated pupil performance measured with the use of standardized tests. As a result, consistent data are collected among the system. The 2010-2011 dataset is used to develop a two-stage data envelopment analysis (DEA) of school efficiency. In the first stage, DEA is employed to calculate an individual efficiency score for each school. It shows that, on average, each school could reduce its inputs by 7% whilst maintaining the same quality of pupil performance. The cause of inefficiency lies in perfectible management. In the second stage, efficiency is regressed on school characteristics and environmental variables;external factors outside of the control of headteachers. The model is tested for multicollinearity, heteroskedasticity and endogeneity. Four variables are identified as statistically significant. School efficiency is negatively influenced by (1) the provision of special education, (2) the proportion of disadvantaged pupils enrolled at the school and (3) operations being held on multiple sites, but positively influenced by school size (captured by the number of pupils). The proportion of allophone pupils; schools located in urban areas and the provision of reception classes for immigrant pupils are not significant. Although the significant variables influencing school efficiency are outside of the control of headteachers, it is still possible to either boost the positive impact or curb the negative impact. Dans le canton de Genève (Suisse), les écoles publiques primaires sont caractérisées par un financement assuré par les collectivités publiques (canton et communes) et par une évaluation des élèves à l'aide d'épreuves standardisées à trois moments distincts de leur scolarité. Cela permet de réunir des informations statistiques consistantes. La base de données de l'année 2010-2011 est utilisée dans une analyse en deux étapes de l'efficience des écoles. Dans une première étape, la méthode d'analyse des données par enveloppement (DEA) est utilisée pour calculer un score d'efficience pour chaque école. Cette analyse démontre que l'efficience moyenne des écoles s'élève à 93%. Chaque école pourrait, en moyenne, réduire ses ressources de 7% tout en conservant constants les résultats des élèves aux épreuves standardisées. La source de l'inefficience réside dans un management des écoles perfectible. Dans une seconde étape, les scores d'efficience sont régressés sur les caractéristiques des écoles et sur des variables environnementales. Ces variables ne sont pas sous le contrôle (ou l'influence) des directeurs d'école. Le modèle est testé pour la multicolinéartié, l'hétéroscédasticité et l'endogénéité. Quatre variables sont statistiquement significatives. L'efficience des écoles est influencée négativement par (1) le fait d'offrir un enseignement spécialisé en classe séparée, (2) la proporition d'élèves défavorisés et (3) le fait d'opérer sur plusieurs sites différents. L'efficience des écoles est influencée positivement par la taille de l'école, mesurée par le nombre d'élèves. La proporition d'élèves allophones, le fait d'être situé dans une zone urbaine et d'offrir des classes d'accueil pour les élèves immigrants constituent autant de variables non significatives. Le fait que les variables qui influencent l'efficience des écoles ne soient pas sous le contrôle des directeurs ne signifie pas qu'il faille céder au fatalisme. Différentes pistes sont proposées pour permettre soit de réduire l'impact négatif soit de tirer parti de l'impact positif des variables significatives.

Engineering polyhydroxyalkanoate content and monomer composition in the oleaginous yeast Yarrowia lipolytica by modifying the ß-oxidation multifunctional protein.

Recombinant strains of the oleaginous yeast Yarrowia lipolytica expressing the PHA synthase gene (PhaC) from Pseudomonas aeruginosa in the peroxisome were found able to produce polyhydroxyalkanoates (PHA). PHA production yield, but not the monomer composition, was dependent on POX genotype (POX genes encoding acyl-CoA oxidases) (Haddouche et al. FEMS Yeast Res 10:917-927, 2010). In this study of variants of the Y. lipolytica β-oxidation multifunctional enzyme, with deletions or inactivations of the R-3-hydroxyacyl-CoA dehydrogenase domain, we were able to produce hetero-polymers (functional MFE enzyme) or homo-polymers (with no 3-hydroxyacyl-CoA dehydrogenase activity) of PHA consisting principally of 3-hydroxyacid monomers (>80%) of the same length as the external fatty acid used for growth. The redirection of fatty acid flux towards β-oxidation, by deletion of the neutral lipid synthesis pathway (mutant strain Q4 devoid of the acyltransferases encoded by the LRO1, DGA1, DGA2 and ARE1 genes), in combination with variant expressing only the enoyl-CoA hydratase 2 domain, led to a significant increase in PHA levels, to 7.3% of cell dry weight. Finally, the presence of shorter monomers (up to 20% of the monomers) in a mutant strain lacking the peroxisomal 3-hydroxyacyl-CoA dehydrogenase domain provided evidence for the occurrence of partial mitochondrial β-oxidation in Y. lipolytica.

Hand-in-hand advances in biomedical engineering and sensorimotor restoration.

BACKGROUND: Living in a multisensory world entails the continuous sensory processing of environmental information in order to enact appropriate motor routines. The interaction between our body and our brain is the crucial factor for achieving such sensorimotor integration ability. Several clinical conditions dramatically affect the constant body-brain exchange, but the latest developments in biomedical engineering provide promising solutions for overcoming this communication breakdown. NEW METHOD: The ultimate technological developments succeeded in transforming neuronal electrical activity into computational input for robotic devices, giving birth to the era of the so-called brain-machine interfaces. Combining rehabilitation robotics and experimental neuroscience the rise of brain-machine interfaces into clinical protocols provided the technological solution for bypassing the neural disconnection and restore sensorimotor function. RESULTS: Based on these advances, the recovery of sensorimotor functionality is progressively becoming a concrete reality. However, despite the success of several recent techniques, some open issues still need to be addressed. COMPARISON WITH EXISTING METHOD(S): Typical interventions for sensorimotor deficits include pharmaceutical treatments and manual/robotic assistance in passive movements. These procedures achieve symptoms relief but their applicability to more severe disconnection pathologies is limited (e.g. spinal cord injury or amputation). CONCLUSIONS: Here we review how state-of-the-art solutions in biomedical engineering are continuously increasing expectances in sensorimotor rehabilitation, as well as the current challenges especially with regards to the translation of the signals from brain-machine interfaces into sensory feedback and the incorporation of brain-machine interfaces into daily activities.