Minerais, métaux, isotopes : recherches archéométriques sur les mines de plomb et d'argent en Valais, Suisse

RESUME Les nombreuses mines de plomb et d'argent du Valais témoignent d'une activité minière importante par le passé, sans toutefois dévoiler ni l'importance des minéralisations, ni l'ancienneté de l'exploitation. La présente recherche a pour but de comprendre pourquoi les grandes mines sont concentrées dans une région, et de déterminer la chronologie de leur exploitation. L'originalité de ce travail réside dans son interdisciplinarité, plus précisément dans l'application des méthodes minéralogiques pour résoudre une problématique historique. Afin d'évaluer les ressources minières en plomb et en argent du Valais, 57 mines et indices ont été repérés et échantillonnés. Les signatures isotopiques du Pb (74 analyses) et les compositions chimiques élémentaires (45 analyses) ont été déterminées. Les plus grandes exploitations se situent dans la nappe de Siviez-Mischabel, au Sud d'une ligne Vallée du Rhône / Val de Bagnes ainsi que dans le Lötschental. Elles sont liées, d'après leur signature isotopique de plomb, à des minéralisations d'âge calédonien (408 à 387 Ma) ou tardi-hercynien (333 à 286 Ma). À ces périodes, l'ancien continent est très lourd et subit une subsidence thermique. Des premières fractures d'extrême importance se forment. Comme il s'agit d'accidents tectoniques majeurs, des gisements de grande extension peuvent se former dans ce contexte. D'autres minéralisations se situent dans les domaines helvétiques (Massif des Aiguilles Rouges, Massif du Mont Blanc et couverture sédimentaire), couvrant une région au Nord de la Vallée du Rhône et du Val d'Entremont. D'âge post-hercynien à tardi-alpin (notons qu'il n'y a pas de minéralisations d'âge tertiaire), elles sont pour la plupart liées à des intrusions granitiques, sources de plomb juvénile. Les mines situées dans ces unités tectoniques sont nettement moins étendues que celles de la nappe de Siviez-Mischabel, ce qui permet de penser que les minéralisations correspondantes le sont également. Les périodes d'exploitation des mines peuvent être déterminées par quatre approches différentes l'archéologie minière, la lecture des textes historiques, l'étude des déchets métallurgiques et la comparaison de la signature isotopique du plomb, que l'on mesure dans un objet archéologique bien daté (monnaie, bijoux etc.), avec celles des minerais. Cette dernière méthode a été appliquée et développée dans le cadre de la présente recherche. Pour ce faire, 221 échantillons d'objet en plomb ou en argent datés entre l'Âge du Fer et le Moyen Age ont été analysés par la méthode des isotopes de plomb et comparés à environ 1800 signatures isotopiques de minerais des gisements les plus importants en Suisse et en Europe. Avant l'époque romaine et jusqu'au 1 er siècle de cette époque, le plomb provient principalement des mines de la péninsule ibérique alors en pleine activité. Un apport des mines d'Europe tempérée, notamment des Vosges, reste à confirmer. A partir du 1" siècle de notre ère, le plomb a principalement été importé en Suisse occidentale de grands centres de productions situées en Allemagne du Nord (région d'Eifel). Les mines de plomb valaisannes, notamment celles de Siviez, débutent leur exploitation en même temps, principalement pour couvrir les besoins locaux, mais également pour l'exportation jusque dans l'arc lémanique et, dans une moindre importance, au-delà. À partir du 4ème siècle, le besoin en plomb a été couvert par un apport des mines locales et par la refonte d'objets anciens. Ce changement d'approvisionnement est probablement lié aux tensions créées par les invasions germaniques durant la seconde moitié du 3' siècle ; le marché suisse n'est dès lors plus approvisionné par le nord, c'est-à-dire par la vallée du Rhin. Quant à l'argent, l'exploitation de ce métal est attestée à partir de la fin du La Tène, peu après l'apparition de ce métal dans la région valaisanne. L'échantillonnage ne couvrant pas l'époque romaine, rien n'est connu pour cette période. A partir du 5" siècle, une exploitation d'argent est de nouveau attestée. Cependant, l'exploitation d'argent des mines locales ne gagne en importance qu'à partir du Moyen Âge avec les frappes monétaires, notamment les frappes carolingiennes et épiscopales valaisannes. Les sources d'argent sont différentes selon leur utilisation : à part quelques exceptions notamment vers la fin du La Tène et au tardo-antique, les bijoux et objets de cultes ont été souvent créés à partir d'argent refondu, contrairement aux monnaies pour lesquelles l'argent provient des mines locales. On note un approvisionnement différent de ce métal pour les objets, notamment les monnaies, selon leur lieu de fabrication : on peut clairement distinguer les objets valaisans de ceux du Plateau Suisse. SUMMARY The many lead and silver mines of the Valais testify of an important mining activity in the past, without however revealing neither the importance of the mineralizations, nor the era of the exploitation. The purpose of this research is to understand why the large mines are concentrated in one region, and to determine the history of their exploitation. The uniqueness of this work lies in its interdisciplinarity, more precisely in the application of mineralogical methods to solve historical problems. In order to evaluate the lead and silver mining resources of the Valais region, 57 mines and ore deposits were located and sampled. The isotope signatures of Pb (74 analyses) and the compositions of the chemical elements (45 analyses) were determined. The largest activities are in the Siviez-Mischabel area, located in the South of the boundary formed by the Rhone, Bagnes and Lotschental valleys. According to their lead isotope signatures, they are linked to mineralizations of the Caledonian (408 to 387 my) or tardi-Hercynian (333 to 286 my) orogenies. In those times, the old continent was very heavy and underwent a thermal subsidence. First fractures of great significance were formed. Through these major tectonic events, large extended ore deposits can be formed. Other mineralizations are found in the helvetic regions situated north of the Rhone and the Entremont valley (the Aiguilles Rouges basement, Mount Blanc basement and the covering sediment). Because they are from post-hercynien to tardi-alpine age (there are no mineralizations of tertiary age), they are mainly linked to granite intrusions, the sources of juvenile lead. The mines found in these tectonic units are significantly less extensive than those of the Siviez-Mischabel area, leading to the assumption that the respective mineralizations extend accordingly. The history of exploitation of the mines can be determined by four different sources: mining archaeology, historical texts, metallurgical waste, and the comparison of the isotope signature of the lead from accurately dated archaeological objects (currency, jewels etc), with those of the ores. This last approach was applied and developed within the framework of this research. The lead isotope signatures of 221 lead or silver objects from the Iron Age to the Middle Age were compared with approximately 1800 samples of ore of the most important ore deposits in Switzerland and Europe. Before the Roman time up to the 1st century, lead comes mainly from the mines of the Iberian Peninsula then in full activity. A contribution of the mines of Central Europe, in particular of the Vosges, remains to be confirmed. From the 1st century on, lead was mainly imported into Western Switzerland from Northern Germany (Eiffel region). The lead mines in the Valais region, in particular those of Siviez, begin their exploitation at the same time, mainly to meet the local needs, but also for export to the lemanic basin and of lesser importance, beyond. As from the 4th century, the need of lead was met by the production from local mines and the recycling of old objects. This change of supply is probably related to the tensions created by the Germanic invasions during second half of the 3rd century; as a consequence, the Swiss market is not supplied any more by the north, i.e. the Rhine valley. Silver production is confirmed starting from the end of La Tene, shortly after the appearance of this metal in the Valais region. Since no objects of Roman origin were analyzed, nothing is known for this period. From the 5th century on, silver production is again confirmed. However, significant silver production from local mines starts only in the Middle Age with the coinage, in particular Carolingian and Episcopal minting from the Valais region. The sources of silver differ according to their use: besides some exceptions in particular towards the end of La Tene and the tardi-Roman, the jewels and objects of worships were often created from recycled silver, contrary to the coins the silver for which comes from the local mines. A different source of silver is observed according to the location of coin manufacture: Objects originating from the Valais region are clearly distinguished from those from the Plateau Suisse. ZUSAMMENFASSUNG Die grosse Zahl von Blei- und Silberminen im Wallis ist Zeugnis einer bedeutenden Bergbautätigkeit, es fehlen aber Hinweise über ihren Umfang und den Zeitraum ihrer Ausbeutung. Die vorliegende Arbeit sucht zu ergründen, warum grosse Minen sich in einer eng begrenzten Region häufen und in welchem Zeitraum sie genutzt wurden. Die Besonderheit der Studie liegt in ihrer Interdisziplinarität, genauer in der Anwendung von mineralogischen Methoden zur Beantwortung historischer Fragestellungen. Zur Beurteilung der Lagerstätten wurden von 57 Minen und Aufschlüssen Proben entnommen oder Nachweise erbracht und mittels 74 Isotopen-Analysen von Blei und 45 chemischen Gesamtanalysen ausgewertet. Die wichtigsten Vorkommen liegen in der Siviez- Mischabel- Decke südlich der Linie Rhonetal- Val de Bagnes, sowie im Lötschental. Die Bleiisotopen- Alter weisen ihre Entstehung der kaledonischen (408 - 387 Mio. J.) oder der spät- herzynischen (333 - 286 Mio. J.) Gebirgsbildungsphase zu. In dieser Periode ist die kompakte Landmasse sehr schwer und erfairt eine thermische Absenkung. Es bilden sich tektonische Brüche von kontinentaler Ausdehnung. Die grossen tektonischen Bewegungen ermöglichen die Bildung von ausgedehnten Lagerstätten. Andere Vorkommen finden sich im Bereich der Helvetischen Alpen (Aiguilles Rouges Massiv, Mont-Blanc-Massiv und Sediment-Decken) im Gebiet nördlich des Rhonetales bis zum Val d'Entremont. Altersmässig sind sie der nach-hercynischen bis zur spät-alpidischen Orogenese zuzuweisen (auffällig ist das Fehlen von Vorkommen im Tertiär) und haben sich meist in der Folge von Granit- Intrusion, dem Ursprung von primärem Blei ausgebildet. Die Bergwerke in diesem Bereich sind deutlich weniger ausgedehnt als jene in der Siviez-Mischabel-Decke und entsprechen wahrscheinlich dem geringen Umfang der zugehörigen Vorkommen. Die Nutzungsperioden der Minen können mit vier verschiedenen Methoden bestimmt werden: Minenarchäologie, Historische Quellen, Auswertung von metallischen Abfällen (Schlacken) und Vergleich der Bleiisotopen-Zusammensetzung von Erzen mit jener von zeitlich gut datierbaren archäologischen Gegenständen (Münzen, Schmuckstücke). Die letztere Methode wurde im Rahmen der vorliegenden Forschungsarbeit entwickelt und angewendet. Zu diesem Zweck wurden an 221 Proben von Blei- oder Silberobjekten, die in die Periode zwischen Eisenzeit und Mittelalter eingestuft werden können, Bleiisotopen- Analysen durchgeführt und mit ca. 1800 Proben aus den wichtigsten Lagerstätten der Schweiz und Europas verglichen. Vor der Römerzeit und bis ins 1. Jahrh. stammt das Blei vornehmlich aus den in jener Zeit in voller Ausbeutung begriffenen Minen der Iberischen Halbinsel. Der Beitrag von Mitteleuropa, besonders der Vogesen, muss noch bestätigt werden. Ab dem 1. Jahrh. nach Chr. wurde die Westschweiz hauptschlich mit Blei aus den grossen Produktionszentren Norddeutschlands, vorwiegend der Eifel, versorgt. In dieser Periode setzt die Ausbeutung der Bleiminen des Wallis, besonders von Siviez, ein. Sie dienen der Deckung des örtlichen Bedarfs aber auch der Ausfuhr in das Gebiet des Genfersees und in einem bescheidenen Rahmen sogar darüber hinaus. Ab dem 4. Jahrhundert wurden vermehrt alte Objekte eingeschmolzen. Dieser Wechsel der Versorgungsquellen war vermutlich eine Folge der Wölkerwanderung in der zweiten Hälfte des 3. Jahrhunderts. Ab diesem Zeitpunkt war Helvetien der Zugang zu den Versorgungsquellen des Nordens, besonders des Rheinlandes, verwehrt. Der Abbau von Silber ist ab dem Ende des La Tène nachgewiesen, nur wenig nach dem Auftreten dieses Metalls im Wallis. Über die Römerzeit können wegen dem Fehlen entsprechender Proben keine Aussagen gemacht werden. Eine erneute Abbauperiode ist ab dem 5. Jahrhundert nachgewiesen. Die Produktion der örtlichen Minen erreicht aber erst im Mittelalter eine gewisse Bedeutung mit der Prägung von Mnzen durch die Karolinger und die Walliser Bischöfe. Die Herkunft des Silbers ist abhängig von dessen Verwendung. Mit wenigen Ausnahmen in der Zeit des La Tène und der späteren Römerzeit wurde für Kunst- und Kult- Gegenstände rezykliertes Silber verwendet, für Münzprägungen neues Silber aus den örtlichen Minen. Von Einfluss auf die Herkunft war auch der Produktionsstandort: Die Objekte aus dem Wallis unterscheiden sich deutlich von jenen des Mittellandes.

Pollution and pollutant transport in the geosphere - An introduction to the symposium

Environmental research in earth sciences is focused on the geosphere, i.e. (1) waters and sediments of rivers, lakes and oceans, and (2) soils and underlying shallow rock formations,both water-unsaturated and -saturated. The subsurface is studied down to greater depths at sites where waste repositories or tunnels are planned and mining activities exist. In recent years, earth scientists have become more and more involved in pollution problems related to their classical field of interest, e.g. groundwater, ore deposits, or petroleum and non-metal natural deposits (gravel, clay, cement precursors). Major pollutants include chemical substances, radioactive isotopes and microorganisms. Mechanisms which govern the transport of pollutants are of physical, chemical (dissolution, precipitation, adsorption), or microbiological (transformation) nature. Land-use planning must reflect a sustainable development and sound scientific criteria. Today's environmental pollution requires working teams with an interdisciplinary background in earth sciences, hydrology, chemistry, biology, physics as well as engineering. This symposium brought together for the first time in Switzerland earth and soil scientists, physicists and chemists, to present and discuss environmental issues concerning the geosphere.

Bitumens in the late Variscan hydrothermal vein-type uranium deposit of Pribram, Czech Republic: Sources, radiation-induced alteration, and relation to mineralization

The late Variscan (275-278 Ma) Pribram uranium deposit is one of the largest known accumulations of uraniferous bitumens in hydrothermal veins. The deposit extends along the northwestern boundary of the Central Bohemian pluton (345-335 Ma) with low-grade metamorphosed Late Proterozoic and unmetamorphosed Cambrian rocks. From a net uranium production of 41,742 metric tons (t), more than 6,000 t were extracted from bitumen-uraninite ores during 43 years of exploration and mining. Three morphological varieties of solid bitumen are recognized: globular, asphaltlike, and cokelike. While the globular bitumen is uranium free, the other two types are uraniferous. The amount of bitumen in ore veins gradually decreases toward the contact with the plutonic body and increases with depth. Two types of bitumen microtextures are recognized using high-resolution transmission electron microscopy: amorphous and microporous, the former being less common in uraniferous samples. A lower Raman peak area ratio (1,360/1,575 cm(-1)) in mineralized bitumens (0.9) compared with uranium-free samples (2.0) indicates a lower degree of microtextural organization in the latter The H/C and O/C atomic ratios in uranium-free bitumens (0.9-1.1 and 0.09, respectively) are higher than those in mineralized samples (H/C = 0.3-0.8, O/C = 0.03-0.09). The chloroform extractable matter yield is Very low in uranium-free bitumens (0.30-0.35% of the total organic carbon,TOC) and decreases with uranium content increase. The extracted solid uraniferous bitumen infrared spectra show depletion in aliphatic CH2 and CH3 groups compared to uranium-free samples. The concentration of oxygen-bearing functional groups relative to aromatic bonds in the IR spectra of uranium-free and mineralized bitumen, however, do not differ significantly. C-13 NMR confirmed than the aromaticity of a uraniferous sample is higher (F-ar = 0.61) than in the uranium-free bitumen (F-ar = 0.51). Pyrolysates from uraniferous and nonuraniferous bitumens do not differ significantly, being predominantly cresol, alkylphenols, alkylbenzenes, and alkylnaphthalenes. The liquid pyrolysate yield decreases significantly with increasing uranium content. The delta(13)C Values of bulk uranium-free bitumens and low-grade uraniferous, asphaltlike bitumens range from -43.6 to 52.3 per mil. High-grade, cokelike, uraniferous bitumens are more C-13 depleted (54.5 to -58.4 parts per thousand). In contrast to the very light isotopic ratios of the high-grade uraniferous cokelike bitumen bulk carbon, the individual n-alkanes and isoprenoids (pristane and phytane) extracted from the same sample are significantly C-13 enriched. The isotopic composition of the C13-24 n-alkanes extracted from the high-grade uraniferous sample (delta(13)C = -28.0 to 32.6 parts per thousand) are heavier compared with the same compounds in a uranium-free sample (delta(13)C = 31.9 to 33.8 parts per thousand). It is proposed that the bitumen source was the isotopically light (delta(13)C = 35.8 to 30.2 parts per thousand) organic matter of the Upper Proterozoic host rocks that were pyrolyzed during intrusion of the Central Bohemian pluton. The C-13- depleted pyrolysates were mobilized from the innermost part of the contact-metamorphic aureole, accumulated in structural traps in less thermally influenced parts of the sedimentary complex and were later extracted by hydrothermal fluids. Bitumens at the Pribram deposit are younger than the main part of the uranium mineralization and were formed through water-washing and radiation-induced polymerization of both the gaseous and liquid pyrolysates. Direct evidence for pyrolysate reduction of uranium in the hydrothermal system is difficult to obtain as the chemical composition of the original organic fluid phase was modified during water-washing and radiolytic alteration. However, indirect evidence-e.g., higher O/C atomic ratios in uranium-free bitumens (0.1) relative to the Upper Proterozoic source rocks (0.02-0.05), isotopically very light carbon in associated whewellite (delta(13)C = 31.7 to -28.4 parts per thousand), and the striking absence of bitumens in the pre-uranium, hematite stage of the mineralization-indicates that oxidation of organic fluids may have contributed to lowering of aO(2) and uraninite precipitation.

An evaluation of the inorganic and organic geochemistry of the San Vicente Mississippi Valley-type zinc-lead district, central Peru: Implications for ore fluid composition, mixing processes, and sulfate reduction

Mississippi Tialley-type zinc-lead deposits and ore occurrences in the San Vicente belt are hosted in dolostones of the eastern Upper Triassic to Lower Jurassic Pucara basin, central Peru. Combined inorganic and organic geochemical data from 22 sites, including the main San Vicente deposit, minor ore occurrences, and barren localities, provide better understanding of fluid pathways and composition, ore precipitation mechanisms, Eh-pH changes during mineralization, and relationships between organic matter and ore formation. Ore-stage dark replacement dolomite and white sparry dolomite are Fe and rare earth element (REE) depleted, and Mn enriched, compared to the host dolomite. In the main deposit, they display significant negative Ce and probably Eu anomalies. Mixing of an incoming hot, slightly oxidizing, acidic brine (H2CO3 being the dominant dissolved carbon species), probably poor in REE and Fe, with local intraformational, alkaline, reducing waters explains the overall carbon and oxygen isotope variation and the distributions of REE and other trace elements in the different hydrothermal carbonate generations. The incoming ore fluid flowed through major aquifers, probably basal basin detrital units, with limited interaction with the carbonate host rocks. The hydrothermal carbonates show a strong regional chemical homogeneity, indicating access of the ore fluids by interconnected channelways near the ore occurrences. Negative Ce anomalies in the main deposit, that are absent at the district scale, indicate local ore-fluid chemical differences. Oxidation of both migrated and indigenous hydrocarbons by the incoming fluid provided the local reducing conditions necessary for sulfate reduction to H2S, pyrobitumen precipitation, and reduction of Eu3+ to Eu2+. Fe-Mn covariations, combined with the REE contents of the hydrothermal carbonates, are consistent with the mineralizing system shifting from reducing/rock-dominated to oxidizing/fluid-dominated conditions following ore deposition. Sulfate and sulfide sulfur isotopes support sulfide origin from evaporite-derived sulfate by thermochemical organic reduction; further evidence includes the presence of C-13-depleted calcite cements (similar to-12 parts per thousand delta(13)C) as sulfate pseudomorphs, elemental sulfur, altered organic matter in the host dolomite, and isotopically heavier, late, solid bitumen. Significant alteration of the indigenous and extrinsic hydrocarbons, with absent bacterial membrane biomarkers (hopanes) is observed. The light delta(34)S of sulfides from small mines and occurrences compared to the main deposit reflect a local contribution of isotopically light sulfur, evidence of local differences in the ore-fluid chemistry.

SwissBioisostere: a database of molecular replacements for ligand design.

The SwissBioisostere database (http://www.swissbioisostere.ch) contains information on molecular replacements and their performance in biochemical assays. It is meant to provide researchers in drug discovery projects with ideas for bioisosteric modifications of their current lead molecule, as well as to give interested scientists access to the details on particular molecular replacements. As of August 2012, the database contains 21 293 355 datapoints corresponding to 5 586 462 unique replacements that have been measured in 35 039 assays against 1948 molecular targets representing 30 target classes. The accessible data were created through detection of matched molecular pairs and mining bioactivity data in the ChEMBL database. The SwissBioisostere database is hosted by the Swiss Institute of Bioinformatics and available via a web-based interface.

New palaeontological investigations in the Jurassic of western Thailand

The paleontological investigations of the Jurassic of Western Thailand, districts of Mae Sot (Tak-Mae Sot highway, Padaeng Tak and Ban Mae Kut Luang Zinc mines) and Umphang (Klo Tho), provide age constraints for the Late Indosinian orogeny, the Paleotethys closure and the timing of the marine Jurassic inundation of Sundaland. The basal conglomerate of the Jurassic is derived from the pelagic Triassic Mae Sariang substratum. Stratigraphy, microfacies and paleontology of the Jurassic marine strata focus especially on ammonites, bivalves, large benthic foraminifera and algae. Among ammonites, the Tethyan Catulloceras perisphinctoides Gemmellaro marks the Upper Toarcian (Aalensis Zone) along the Tak-Mae Sot highway and Riccardiceras longalvum (Vacek). Malladaites pertinax (Vacek), Abbasites sp. and Vacekia sp. indicate Middle Aalenian to lowermost Bajocian in the Padaeng Mine (SE of Mae Sot) and Klo-Tho (Umphang). Vacekia sp., Spinammatoceras schindewolfi Linares and Sandoval and Malladaites vaceki Linares and Sandoval indicate Middle Aalenian to lowermost Upper Aalenian at Ban Mae Kut Luang (NE of Mae Sot). Among foraminifers, the large benthic foraminifer Timidonella sarda Bassoullet, Chabrier and Fourcade in the Western Tethys is indicative for Aalenian-Bajocian times, as characterized in the section at the Tak-Padaeng Zinc mine and the Klo-Tho Formation near Umphang. The endemic foraminifer Gutnicella kaempferi characterizes the Pu Khloe Khi Formation near Umphang. Among bivalves, shallow marine, dominantly endemic fauna includes Parvamussium donaiense (Mansuy) and Bositra ornate (Quenstedt), from the Toarcian to the Early Bajocian. A consideration of the faunal affinity shows that the fauna is partly endemic with Northern Tethyan (Eurasian) affinity. Crown Copyright (C) 2010 Published by Elsevier B.V. on behalf of International Association for Gondwana Research. All rights reserved.

EuroPhenome: a repository for high-throughput mouse phenotyping data.

The broad aim of biomedical science in the postgenomic era is to link genomic and phenotype information to allow deeper understanding of the processes leading from genomic changes to altered phenotype and disease. The EuroPhenome project (http://www.EuroPhenome.org) is a comprehensive resource for raw and annotated high-throughput phenotyping data arising from projects such as EUMODIC. EUMODIC is gathering data from the EMPReSSslim pipeline (http://www.empress.har.mrc.ac.uk/) which is performed on inbred mouse strains and knock-out lines arising from the EUCOMM project. The EuroPhenome interface allows the user to access the data via the phenotype or genotype. It also allows the user to access the data in a variety of ways, including graphical display, statistical analysis and access to the raw data via web services. The raw phenotyping data captured in EuroPhenome is annotated by an annotation pipeline which automatically identifies statistically different mutants from the appropriate baseline and assigns ontology terms for that specific test. Mutant phenotypes can be quickly identified using two EuroPhenome tools: PhenoMap, a graphical representation of statistically relevant phenotypes, and mining for a mutant using ontology terms. To assist with data definition and cross-database comparisons, phenotype data is annotated using combinations of terms from biological ontologies.

6.2

Airborne particles can come from a variety of sources and contain variable chemical constituents. Some particles are formed by natural processes, such as volcanoes, erosion, sea spray, and forest fires, while other are formed by anthropogenic processes, such as industrial- and motor vehicle-related combustion, road-related wear, and mining. In general, larger particles (those greater than 2.5 μm) are formed by mechanical processes, while those less than 2.5 μm are formed by combustion processes. The chemical composition of particles is highly influenced by the source: for combustion-related particles, factors such as temperature of combustion, fuel type, and presence of oxygen or other gases can also have a large impact on PM composition. These differences can often be observed at a regional level, such as the greater sulphate-composition of PM in regions that burn coal for electricity production (which contains sulphur) versus regions that do not. Most countries maintain air monitoring networks, and studies based on the resulting data are the most common basis for epidemiology studies on the health effects of PM. Data from these monitoring stations can be used to evaluate the relationship between community-level exposure to ambient particles and health outcomes (i.e., morbidity or mortality from various causes). Respiratory and cardiovascular outcomes are the most commonly assessed, although studies have also considered other related specific outcomes such as diabetes and congenital heart disease. The data on particle characteristics is usually not very detailed and most often includes some combination of PM2.5, PM10, sulphate, and NO2. Other descriptors that are less commonly found include particle number (ultrafine particles), metal components of PM, local traffic intensity, and EC/OC. Measures of association are usually reported per 10 μg/m3 or interquartile range increase in pollutant concentration. As the exposure data are taken from regional monitoring stations, the measurements are not representative of an individual's exposure. Particle size is an important descriptor for understanding where in the human respiratory system the particles will deposit: as a general rule, smaller particles penetrate to deeper regions of the lungs. Initial studies on the health effects of particulate matter focused on mass of the particles, including either all particles (often termed total suspended particulate or TSP) or PM10 (all particles with an aerodynamic diameter less than 10 μm). More recently, studies have considered both PM10 and PM2.5, with the latter corresponding more directly to combustion-related processes. UFPs are a dominant source of particles in terms of PNC, yet are negligible in terms of mass. Very few epidemiology studies have measured the effect of UFPs on health; however, the numbers of studies on this topic are increasing. In addition to size, chemical composition is of importance when understanding the toxicity of particles. Some studies consider the composition of particles in addition to mass; however this is not common, in part due the cost and labour involved in such analyses.