Urinary sphincter based on electronics and artificial muscles

Objectives: The AMS 800TM is the current artificial urinary sphincter (AUS) for incontinence due to intrinsic sphincter deficiency. Despite good clinical results, technical failures inherent to the hydraulic mechanism or urethral ischemic injury contribute to revisions up to 60%. We are developing an electronic AUS, called ARTUS to overcome the rigors of AMS. The objective of this study was to evaluate the technical efficacy and tissue tolerance of the ARTUS system in an animal model.Methods: The ARTUS is composed by three parts: the contractile unit, a series of rings and an integrated microprocessor. The contractile unit is made of Nitinol fibers. The rings are placed around the urethra to control the flow of urine by squeezing the urethra. They work in a sequential alternative mode and are controlled by a microprocessor. In the first phase a three-rings device was used while in the second phase a two-rings ARTUS was used. The device was implanted in 14 sheep divided in two groups of six and eight animals for study purpose. The first group aimed at bladder leak point pressure (BLPP) measurement and validation of the animal model; the second group aimed at verifying mid-term tissue tolerance by explants at twelve weeks. General animal tolerance was also evaluated.Results: The ARTUS system implantation was uneventful. When the system was activated, the BLPP was measured at 1.038±0.044 bar (mean±SD). Urethral tissue analysis did not show significant morphological changes. No infection and no sign of discomfort were noted in animals at 12 weeks.Conclusions: The ARTUS proved to be effective in continence achievement in this study. Histological results support our idea that a sequential alternative mode can avoid urethral atrophy and ischemia. Further technical developments are needed to verify long-term outcome and permit human use.

The Formal Independence of Regulators: A Comparison of 17 Countries and 7 Sectors

This article seeks to explain the pattern of delegation to independent regulatory agencies in Western Europe. Two types of arguments are advanced to explain variations in the formal independence of regulators. Firstly, the need for governments to increase their credible commitment capacity may lead them to delegate regulation to an agency that is partly beyond their direct control. Secondly, delegation may be a response to the political uncertainty problem, which arises when governments are afraid of being replaced by another coalition with different preferences, which could decide to change existing policy choices. In addition, veto players may constitute a functional equivalent of delegation, since they influence policy stability and therefore tend to mitigate both the credibility and the political uncertainty problems. These arguments are consistent with the results of the empirical analysis of the formal independence of regulators in seventeen countries and seven sectors.

Feasibility and electromagnetic compatibility study of the ClearPEM front-end electronics for simultaneous PET-MR imaging

In this work we present a first feasibility study of the ClearPEM technology for simultaneous PET-MR imaging. The mutual electromagnetic interference (EMI) effects between both systems were evaluated on a 7 T magnet by characterizing the response behavior of the ClearPEM detectors and front-end electronics to pulsed RF power and switched magnetic field gradients; and by analyzing the MR system performance degradation from noise pickup into the RF receiver chain, and from magnetic susceptibility artifacts caused by PET front-end materials.

Urinary Sphincter Based on Electronics and Artificial Muscles

Objectives: The AMS 800 is the current artifi cial urinary sphincter (AUS) forincontinence due to intrinsic sphincter defi ciency. Despite good clinical results,technical failures inherent to the hydraulic mechanism or urethral ischemicinjury contribute to revisions up to 60%. We are developing an electronic AUS,called ARTUS to overcome the rigors of AMS. The objective of this study wasto evaluate the technical effi cacy and tissue tolerance of the ARTUS systemin an animal model.Methods: The ARTUS is composed by three parts: thecontractile unit, a series of rings and an integrated microprocessor. The contractileunit is made of Nitinol fi bers. The rings are placed around the urethrato control the fl ow of urine by squeezing the urethra. They work in a sequentialalternative mode and are controlled by a microprocessor. In the fi rst phase athree-rings device was used while in the second phase a two-rings ARTUS wasused. The device was implanted in 14 sheep divided in two groups of six andeight animals for study purpose. The fi rst group aimed at bladder leak pointpressure (BLPP) measurement and validation of the animal model; the secondgroup aimed at verifying midterm tissue tolerance by explants at twelve weeks.General animal tolerance was also evaluated.Results: The ARTUS systemimplantation was uneventful. When the system was activated, the BLPP wasmeasured at 1.038 ± 0.044 bar (mean ± SD). Urethral tissue analysis did notshow signifi cant morphological changes. No infection and no sign of discomfortwere noted in animals at 12 weeks.Conclusions: The ARTUS proved to beeffective in continence achievement in this study. Histological results supportour idea that a sequential alternative mode can avoid urethral atrophy andischemia. Further technical developments are needed to verify long-termoutcome and permit human use.

THE INFLUENCE OF THE REGULATORY ENVIRONMENT ON THE DEFINITION OF PERFORMANCE: THE EXAMPLE OF THE SPORT BETTING AND LOTTERY SECTORS

This thesis examines the interplay between state regulation and the way organisations define performance. Performance is generally understood to be a multidimensional concept, but the extent to which its different facets are shaped by regulation remains an understudied question. This thesis aims to address this question and provide at least a partial answer to it. To do so, it examines whether the level of regulation amplifies or abates the multidimensionality of regulated entities' performance definition, i.e. the way they define the concept of performance. The leading question is whether an organisation's performance definition can be associated with the regulatory intensity its environment confronts it with. Moreover, the study explores whether the type of ownership-public or private-plays a role in regard to how a regulated entity defines performance. In order to undertake this investigation, the thesis focuses on the performance definitions of organisations in six different sport betting and lottery regulations. Qualitative data is gathered from primary and secondary documents as well as through semi-structured interviews with chief executive officers (CEO), members of executive management and gambling experts in each of these countries. The thesis concludes that the performance definitions of the organisations under study are indeed multidimensional, as well as clearly influenced by their respective regulatory environments. However, not all performance dimensions identified in the literature are present, nor can they all be estimated to be part of the performance definition. In addition, the public-private difference in defining performance-as conceptualised in the literature- seems to be abated in a regulated environment. The central role played by regulation in regard to the multidimensionality of the performance definition partially outweighs the effect of the nature of ownership.

Contribution to the Development of the LHCb Vertex Locator Readout Electronics

L'expérience LHCb sera installée sur le futur accélérateur LHC du CERN. LHCb est un spectromètre à un bras consacré aux mesures de précision de la violation CP et à l'étude des désintégrations rares des particules qui contiennent un quark b. Actuellement LHCb se trouve dans la phase finale de recherche et développement et de conception. La construction a déjà commencé pour l'aimant et les calorimètres. Dans le Modèle Standard, la violation CP est causée par une phase complexe dans la matrice 3x3 CKM (Cabibbo-Kobayashi-Maskawa) de mélange des quarks. L'expérience LHCb compte utiliser les mesons B pour tester l'unitarité de cette matrice, en mesurant de diverses manières indépendantes tous les angles et côtés du "triangle d'unitarité". Cela permettra de surdéterminer le modèle et, peut-être, de mettre en évidence des incohérences qui seraient le signal de l'existence d'une physique au-delà du Modèle Standard. La reconstruction du vertex de désintégration des particules est une condition fondamentale pour l'expérience LHCb. La présence d'un vertex secondaire déplacé est une signature de la désintégration de particules avec un quark b. Cette signature est utilisée dans le trigger topologique du LHCb. Le Vertex Locator (VeLo) doit fournir des mesures précises de coordonnées de passage des traces près de la région d'interaction. Ces points sont ensuite utilisés pour reconstruire les trajectoires des particules et l'identification des vertices secondaires et la mesure des temps de vie des hadrons avec quark b. L'électronique du VeLo est une partie essentielle du système d'acquisition de données et doit se conformer aux spécifications de l'électronique de LHCb. La conception des circuits doit maximiser le rapport signal/bruit pour obtenir la meilleure performance de reconstruction des traces dans le détecteur. L'électronique, conçue en parallèle avec le développement du détecteur de silicium, a parcouru plusieurs phases de "prototyping" décrites dans cette thèse.<br/><br/>The LHCb experiment is being built at the future LHC accelerator at CERN. It is a forward single-arm spectrometer dedicated to precision measurements of CP violation and rare decays in the b quark sector. Presently it is finishing its R&D and final design stage. The construction already started for the magnet and calorimeters. In the Standard Model, CP violation arises via the complex phase of the 3 x 3 CKM (Cabibbo-Kobayashi-Maskawa) quark mixing matrix. The LHCb experiment will test the unitarity of this matrix by measuring in several theoretically unrelated ways all angles and sides of the so-called "unitary triangle". This will allow to over-constrain the model and - hopefully - to exhibit inconsistencies which will be a signal of physics beyond the Standard Model. The Vertex reconstruction is a fundamental requirement for the LHCb experiment. Displaced secondary vertices are a distinctive feature of b-hadron decays. This signature is used in the LHCb topology trigger. The Vertex Locator (VeLo) has to provide precise measurements of track coordinates close to the interaction region. These are used to reconstruct production and decay vertices of beauty-hadrons and to provide accurate measurements of their decay lifetimes. The Vertex Locator electronics is an essential part of the data acquisition system and must conform to the overall LHCb electronics specification. The design of the electronics must maximise the signal to noise ratio in order to achieve the best tracking reconstruction performance in the detector. The electronics is being designed in parallel with the silicon detector development and went trough several prototyping phases, which are described in this thesis.

Co-evolution of Policy Sectors: Health Care and Public Health in five Countries

Cette thèse analyse la co-évolution de deux secteurs dans la politique de la santé: santé publique (public health) et soins aux malades (health care). En d'autres termes, la relation entre les dimensions curative et préventive de la politique de la santé et leur développement dans la durée. Une telle recherche est nécessaire car les problèmes de la santé sont complexes et ont besoin de solutions coordonnées. De plus, les dépenses de la santé ont augmenté sans arrt durant les dernières décennies. Un moyen de réduire une future augmentation des dépenses pourrait consister en davantage d'investissement dans des mesures préventives. En relation avec cette idée, ma recherche analyse les politiques de la santé publique et les soins aux malades de cinq pays: Allemagne, Angleterre, Australie, Etats-Unis et Suisse. En m'appuyant sur la littérature secondaire, des statistiques descriptives et des entretiens avec des experts et des politiciens, j'analyse la relation entre les deux secteurs depuis la fin du dix-neuvième siècle. En particulier, je me focalise sur la relation des deux champs sur trois niveaux: institutions, acteurs et politiques. Mes résultats montrent les similitudes et les différences d'évolution entre les cinq pays. D'un c^oté, lorsque la profession médicale est politiquement active et que le pays consiste en une fédération centralisée ou en un gouvernement unitaire, les deux secteurs sont intégrés au niveau institutionnel, ralliant les professions et groupes d'intérêt des deux secteurs la cause commune dans une activité politique. Par contre, dans tous les pays, les deux secteurs ont co-évolué vers une complémentarité malgré de la politisation des professions et la centralisation du gouvernement. Ces résultats sont intéressants pour la science politique en général car ils soulignent l'importance des professions pour le développement institutionnel et proposent un cadre pour l'analyse de la co-évolution des politiques publiques en général. -- This Ph.D. thesis analyzes the co-evolution of the health care and the public health sectors. In other words, the relation between preventive and curative health policy and its evolution over time. Such research is necessary, because current health problems are complex and might need coordinated solutions. What is more, health expenditures have increased continuously in the last decades. One way to slow down further increase in health spending could be to invest more in preventative health policies. Therefore, I am connecting individual health care and public health into a common analysis, taking Australia, Germany, Switzerland, the UK and the U.S. as examples. Based on secondary literature, descriptive statistics and interviews with experts and policymakers, I am analyzing how the two sectors' relations co-evolved between the late nineteenth and the early twenty-first century. Specifically, I am researching how health care and public health were related on the levels of institutions, actors and policies. My results show that there are differences and similarities in the co-evolution of policy sectors between these countries. On the one hand, when the medical profession was politically active and the country a centralized federation or a unitary state, there was institutional integration and common political advocacy of the sectors' interest groups and professions. On the other hand, in all countries, both sectors co-evolved towards complementarity, irrespectively of the politicization of professions and centralization of government. These findings are interesting for the political science literature at large, because they underline the importance of professions for institutional development and propose an analytical framework for analyzing the co-evolution of policy sectors in general.