Late Labradorian metamorphism and anorthosite-granitoid intrusion, Cape-Caribou River allochthon, Grenville Province, Labrador - Evidence from U-Pb geochronology

In the Cape Caribou River allochthon (CCRA), metaigneous and gneissic units occur as a shallowly plunging synform in the hanging wall of the Grand Lake thrust system (GLTS), a Grenvillian structure that forms the boundary between the Mealy Mountains and Groswater Bay terranes. The layered rocks of the CCRA are cut by a stockwork of monzonite dykes related to the Dome Mountain suite and by metadiabase-amphibolite dykes that probably form part of the ca. 1380 Ma Mealy swarm. The mafic dykes appear to postdate much of the development of subhorizontal metamorphic layering within the lower parts of the CCRA. The uppermost (least metamorphosed) units of the CCRA, the North West River anorthosite-metagabbro and the Dome Mountain monzonite suite, have been dated at 1625 +/- 6 and 1626 +/- 2 Ma, respectively. An amphibolite unit that concordantly underlies the anorthosite-metagabbro and is intruded discordantly by monzonite dykes has given metamorphic ages of 1660 +/- 3 and 1631 +/- 2 Ma. Granitoid gneisses that form the lowest level of the CCRA have given a migmatization age of 1622 +/- 6 Ma. The effects of Grenvillian metamorphism become apparent in the lower levels of the allochthon where gneisses, amphibolite, and mafic dykes have given new generation zircon ages of 1008 +/- 2, 1012 +/- 3, and 1011 +/- 3 Ma, respectively. A posttectonic pegmatite has also given zircon and monazite ages of 1016(-3)(+7) and 1013 +/- 3 Ma, respectively. Although these results indicate new growth of Grenvillian zircon, this process was generally not accompanied by penetrative deformation or melting. Thus, the formation of gneissic fabrics and the overall layered nature of the lower CCRA are a result primarily of Labradorian (1660-1620 Ma) tectonism and intrusion, and probably reflect early movement on an ancestral GLTS. Grenvillian heating and metamorphism (up to granulite facies) was strongly concentrated towards the base of the CCRA and probably occurred during northwestward thrusting of the allochthon over the Groswater Bay terrane.

Tectonomagmatic evolution of Western Amazonia: Geochemical characterization and zircon U-Pb geochronologic constraints from the Peruvian Eastern Cordilleran granitoids

The results of a coupled, in situ laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) U-Pb study on zircon and geochemical characterization of the Eastern Cordilleran intrusives of Peru reveal 1.15 Ga of intermittent magmatism along central Western Amazonia, the Earth's oldest active open continental margin. The eastern Peruvian batholiths are volumetrically dominated by plutonism related to the assembly and breakup of Pangea during the Paleozoic-Mesozoic transition. A Carboniferous-Permian (340-285 Ma) continental arc is identified along the regional orogenic strike from the Ecuadorian border (6 degrees S) to the inferred inboard extension of the Arequipa-Antofalla terrane in southern Peru (14 degrees S). Widespread crustal extension and thinning, which affected western Gondwana throughout the Permian and Triassic resulted in the intrusion of the late- to post-tectonic La Merced-San Ramon-type anatectites dated between 275 and 220 Ma, while the emplacement of the southern Cordillera de Carabaya peraluminous granitoids in the Late Triassic to Early Jurassic (220-190 Ma) represents, temporally and regionally, a separate tectonomagmatic event likely related to resuturing of the Arequipa-Antofalla block. Volcano-plutonic complexes and stocks associated with the onset of the present Andean cycle define a compositionally bimodal alkaline suite and cluster between 180 and 170 Ma. A volumetrically minor intrusive pulse of Oligocene age (ca. 30 Ma) is detected near the southwestern Cordilleran border with the Altiplano. Both post-Gondwanide (30-170 Ma), and Precambrian plutonism (691-1123 Ma) are restricted to isolated occurrences spatially comprising less than 15% of the Eastern Cordillera intrusives. Only one remnant of a Late Ordovician intrusive belt is recognized in the Cuzco batholith (446.5 +/- 9.7 Ma) indicating that the Famatinian arc system previously identified in Peru along the north-central Eastern Cordillera and the coastal Arequipa-Antofalla terrane also existed inboard of this parautochthonous crustal fragment. Hitherto unknown occurrences of late Mesoproterozoic and middle Neoproterozoic granitoids from the south-central cordilleran segment define magmatic events at 691 +/- 13 Ma, 751 +/- 8 Ma, 985 +/- 14 Ma, and 1071-1123 +/- 23 Ma that are broadly coeval with the Braziliano and Grenville-Sunsas orogenies, respectively. Our data suggest the existence of a continuous orogenic belt in excess of 3500 km along Western Amazonia during the formation of Rodinia, its ``early'' fragmentation prior to 690 Ma, and support a model of reaccretion of the Paracas-Arequipa-Antofalla terrane to western Gondwana in the Early Ordovician with subsequent detachment of the Paracas segment in form of the Mexican Oaxaquia microcontinent in Middle Ordovician. A tectonomagmatic model involving slab detachment, followed by underplating of cratonic margin by asthenospheric mantle is proposed for the genesis of the volumetrically dominant Late Paleozoic to early Mesozoic Peruvian Cordilleran batholiths.

Characteristic reflection patterns in the southeast Canadian cordillera, northern Appalachians and Swiss Alps

There are some striking similarities and some differences between the seismic reflection sections recorded across the fold and thrust belts of the southeast Canadian Cordillera, Quebec-Maine Appalachians and Swiss Alps. In the fold and thrust belts of all three mountain ranges, seismic reflection surveys have yielded high-quality images of. (1) nappes (thin thrust sheets) stacked on top of ancient continental margins; (2) ramp anticlines in the hanging walls of faults that have ramp-flat or listric geometries; (3) back thrusts and back folds that developed during the terminal phases of orogeny; and (4) tectonic wedges and regional decollements. A principal result of the Cordilleran and Appalachian deep crustal studies has been the recognition of master decollements along which continental margin strata have been transported long distances, whereas a principal result of the Swiss Alpine deep crustal program has been the identification of the Adriatic indenter, a crustal-scale wedge that caused delamination of the European lithosphere. Significant crustal roots are observed beneath the fold and thrust belts of the Alps, southeast Canadian Cordillera and parts of the southern Appalachians, but such structures beneath the northern Appalachians have probably been removed by post-orogenic collapse and/or crustal attenuation associated with the Mesozoic opening of the Atlantic Ocean.

The Intra-Alpine terrain: A Paleotethyan remnant in the Alpine Variscides

A Cordilleran type evolution is proposed for the Variscan orogen of middle Europe. This orogenesis is regarded as mainly evolving through terrain accretion and subsequent collapse of the overthickened crust. A major terrain accretion took place between late Devonian and early Carboniferous when the Intra-Alpine terrain collided with the Ligerian-Moldanubian active margin. This terrain is regarded as being a segment of the northern margin of Paleotethys. Oblique subduction of Paleotethys under the newly accreted terrain is responsible for the voluminous calc-alkaline magmatism in late Carboniferous. The Paleotethys subduction has generated a lateral displacement of the eastern part of the Intra-Alpine terrain inducing a duplication of its western end. The late Carboniferous closure of Paleotethys in middle Europe is not found eastward where this closure happened only in early-Triassic times, following the simultaneous opening of the Neotethys ocean and the Meliata back-arc. Palinspastic models of the western Tethyan realm are proposed from the Carboniferous to early Jurassic.

Structure et évolution thermique de la croûte supérieure des chaînes de subduction : approches thermologique et modélisation numérique, dans les North Cascades (U.S.A) et de la zone de faille Motagua (Guatemala)

Cette thèse cible l'étude de la structure thermique de la croûte supérieure (<10km) dans les arcs magmatiques continentaux, et son influence sur l'enregistrement thermochronologique de leur exhumation et de leur évolution topographique. Nous portons notre regard sur deux chaînes de montagne appartenant aux Cordillères Américaines : Les Cascades Nord (USA) et la zone de faille Motagua (Guatemala). L'approche utilisée est axée sur la thermochronologie (U-Th-Sm)/He sur apatite et zircon, couplée avec la modélisation numérique de la structure thermique de la croûte. Nous mettons en évidence la variabilité à la fois spatiale et temporelle du gradient géothermique, et attirons l'attention du lecteur sur l'importance de prendre en compte la multitude des processus géologiques perturbant la structure thermique dans les chaînes de type cordillère, c'est à dire formées lors de la subduction océanique sous un continent.Une nouvelle approche est ainsi développée pour étudier et contraindre la perturbation thermique autour des chambres magmatiques. Deux profiles âge-elevation (U-Th-Sm)/He sur apatite et zircon, ont été collectées 7 km au sud du batholithe de Chilliwack, Cascades Nord. Les résultats montrent une variabilité spatiale et temporelle du gradient géothermique lors de l'emplacement magmatique qui peut être contrainte et séparé de l'exhumation. Durant l'emplacement de l'intrusion, la perturbation thermique y atteint un état d'équilibre (-80-100 °C/km) qui est fonction du flux de magma et de ia distance à la source du magma, puis rejoint 40 °C/km à la fin du processus d'emplacement magmatique.Quelques nouvelles données (U-Th)/He, replacées dans une compilation des données existantes dans les Cascades Nord, indiquent une vitesse d'exhumation constante (-100 m/Ma) dans le temps et l'espace entre 35 Ma et 2 Ma, associée à un soulèvement uniforme de la chaîne contrôlé par l'emplacement de magma dans la croûte durant toute l'activité de l'arc. Par contre, après ~2 Ma, le versant humide de la chaîne est affecté par une accélération des taux d'exhumation, jusqu'à 3 km de croûte y sont érodés. Les glaciations ont un triple effet sur l'érosion de cette chaîne: (1) augmentation des vitesses d'érosion, d'exhumation et de soulèvement la où les précipitations sont suffisantes, (2) limitation de l'altitude contrôlé par la position de Γ Ε LA, (3) élargissement du versant humide et contraction du versant aride de la chaîne.Les modifications des réseaux de drainage sont des processus de surface souvent sous-estimés au profil d'événements climatiques ou tectoniques. Nous proposons une nouvelle approche couplant une analyse géomorphologique, des données thermochronologiques de basse température ((U-Th-Sm)/He sur apatite et zircon), et l'utilisation de modélisation numérique thermo-cinématique pour les mettre en évidence et les dater; nous testons cette approche sur la gorge de la Skagit river dans les North Cascades.De nouvelles données (U-Th)/He sur zircons, complétant les données existantes, montrent que le déplacement horizontal le long de la faille transformante continentale Motagua, la limite des plaques Caraïbe/Amérique du Nord, a juxtaposé un bloc froid, le bloc Maya (s.s.), contre un bloque chaud, le bloc Chortis (s.s.) originellement en position d'arc. En plus de donner des gammes d'âges thermochronologiques très différents des deux côtés de la faille, le déplacement horizontal rapide (~2 cm/a) a produit un fort échange thermique latéral, résultant en un réchauffement du côté froid et un refroidissement du côté chaud de la zone de faille de Motagua.Enfin des données (U-Th-Sm)/He sur apatite témoignent d'un refroidissement Oligocène enregistré uniquement dans la croûte supérieure de la bordure nord de la zone de faille Motagua. Nous tenterons ultérieurement de reproduire ce découplage vertical de la structure thermique par la modélisation de la formation d'un bassin transtensif et de circulation de fluides le long de la faille de Motagua. - This thesis focuses on the influence of the dynamic thermal structure of the upper crust (<10km) on the thermochronologic record of the exhumational and topographic history of magmatic continental arcs. Two mountain belts from the American Cordillera are studied: the North Cascades (USA) and the Motagua fault zone (Guatemala). I use a combined approach coupling apatite and zircon (U-Th-Sm}/He thermochronology and thermo- kinematic numerical modelling. This study highlights the temporal and spatial variability of the geothermal gradient and the importance to take into account the different geological processes that perturb the thermal structure of Cordilleran-type mountain belts (i.e. mountain belts related to oceanic subduction underneath a continent}.We integrate apatite and zircon (U-Th)/He data with numerical thermo-kinematic models to study the relative effects of magmatic and surface processes on the thermal evolution of the crust and cooling patterns in the Cenozoic North Cascades arc (Washington State, USA). Two age-elevation profiles that are located 7 km south of the well-studied Chiliiwack intrusions shows that spatial and temporal variability in geothermal gradients linked to magma emplacement can be contrained and separated from exhumation processes. During Chiliiwack batholith emplacement at -35-20 Ma, the geothermal gradient of the country rocks increased to a very high steady-state value (80-100°C/km), which is likely a function of magma flux and the distance from the magma source area. Including temporally varying geothermal gradients in the analysis allows quantifying the thermal perturbation around magmatic intrusions and retrieving a relatively simple denudation history from the data.The synthesis of new and previously published (U-Th)/He data reveals that denudation of the Northern Cascades is spatially and temporally constant at -100 m/Ma between ~32 and ~2 Ma, which likely reflects uplift due to magmatic crustal thickening since the initiation of the Cenozoic stage of the continental magmatic arc. In contrast, the humid flank of the North Cascades is affected by a ten-fold acceleration in exhumation rate at ~2 Ma, which we interpret as forced by the initiation of glaciations; around 3 km of crust have been eroded since that time. Glaciations have three distinct effects on the dynamics of this mountain range: (1) they increase erosion, exhumation and uplift rates where precipitation rates are sufficient to drive efficient glacial erosion; (2) they efficiently limit the elevation of the range; (3) they lead to widening of the humid flank and contraction of the arid flank of the belt.Drainage reorganizations constitute an important agent of landscape evolution that is often underestimated to the benefit of tectonic or climatic events. We propose a new method that integrates geomorphology, low-temperature thermochronometry (apatite and zircon {U-Th-Sm)/He), and 3D numerical thermal-kinematic modelling to detect and date drainage instability producing recent gorge incision, and apply this approach to the Skagit River Gorge, North Cascades.Two zircon (U-Th)/He age-elevation profiles sampled on both sides of the Motagua Fault Zone (MFZ), the boundary between the North American and the Caribbean plates, combined with published thermochronological data show that strike-slip displacement has juxtaposed the cold Maya block (s.s.) against the hot, arc derived, Chortis block (s.s ), producing different age patterns on both sides of the fault and short-wavelength lateral thermal exchange, resulting in recent heating of the cool side and cooling of the hot side of the MFZ.Finally, an apatite (U-Th-Sm)/He age-elevation profile records rapid cooling at -35 Ma localized only in the upper crust along the northern side of the Motagua fault zone. We will try to reproduce these data by modeling the thermal perturbation resulting from the formation of a transtensional basin and of fluid flow activity along a crustal- scale strike-slip fault.

Two-stage, extreme albitization of A-type granites from Rajasthan, NW India

Albitization is a common process during which hydrothermal fluids convert plagioclase and/or K-feldspar into nearly pure albite; however, its specific mechanism in granitoids is not well understood. The c. 1700 Ma A-type metaluminous ferroan granites in the Khetri complex of Rajasthan, NW India, have been albitized to a large extent by two metasomatic fronts, an initial transformation of oligoclase to nearly pure albite and a subsequent replacement of microcline by albite, with sharp contacts between the microcline-bearing and microcline-free zones. Albitization has bleached the original pinkish grey granite and turned it white. The mineralogical changes include transformation of oligoclase (similar to An(12)) and microcline (similar to Or(95)) to almost pure albite (similar to An(0 center dot 5-2)), amphibole from potassian ferropargasite (X-Fe 0 center dot 84-0 center dot 86) to potassic hastingsite (X-Fe 0 center dot 88-0 center dot 97) and actinolite (X-Fe 0 center dot 32-0 center dot 67), and biotite from annite (X-Fe 0 center dot 71-0 center dot 74) to annite (X-Fe 0 center dot 90-0 center dot 91). Whole-rock isocon diagrams show that, during albitization, the granites experienced major hydration, slight gain in Si and major gain in Na, whereas K, Mg, Fe and Ca were lost along with Rb, Ba, Sr, Zn, light rare earth elements and U. Whole-rock Sm-Nd isotope data plot on an apparent isochron of 1419 +/- 98 Ma and reveal significant disturbance and at least partial resetting of the intrusion age. Severe scatter in the whole-rock Rb-Sr isochron plot reflects the extreme Rb loss in the completely albitized samples, effectively freezing Sr-87/Sr-86 ratios in the albite granites at very high values (0 center dot 725-0 center dot 735). This indicates either infiltration of highly radiogenic Sr from the country rock or, more likely, radiogenic ingrowth during a considerable time lag (estimated to be at least 300 Myr) between original intrusion and albitization. The albitization took place at similar to 350-400 degrees C. It was caused by the infiltration of an ascending hydrothermal fluid that had acquired high Na/K and Na/Ca ratios during migration through metamorphic rocks at even lower temperatures in the periphery of the plutons. Oxygen isotope ratios increase from delta O-18 = 7 parts per thousand in the original granite to values of 9-10 parts per thousand in completely albitized samples, suggesting that the fluid had equilibrated with surrounding metamorphosed crust. A metasomatic model, using chromatographic theory of fluid infiltration, explains the process for generating the observed zonation in terms of a leading metasomatic front where oligoclase of the original granite is converted to albite, and a second, trailing front where microcline is also converted to albite. The temperature gradients driving the fluid infiltration may have been produced by the high heat production of the granites themselves. The confinement of the albitized granites along the NE-SW-trending Khetri lineament and the pervasive nature of the albitization suggest that the albitizing fluids possibly originated during reactivation of the lineament. More generally, steady-state temperature gradients induced by the high internal heat production of A-type granites may provide the driving force for similar metasomatic and ore-forming processes in other highly enriched granitoid bodies.

Large calcite and bulk-rock volume loss in metacarbonate xenoliths from the Qu,rigut massif (French Pyrenees)

Chemical mass transfer was quantified in a metacarbonate xenolith enclosed within the granodiorite of the Qu,rigut massif (Pyrenees, France). Mass balance calculations suggest a strong decrease of CaO, SrO and CO(2) contents (up to -90%), correlated with a decrease of modal calcite content as the contact is approached. Most other chemical elements behave immobile during metasomatism. They are therefore passively enriched. Only a small increase of SiO(2), Al(2)O(3) and Fe(2)O(3) contents occurs in the immediate vicinity of the contact. Hence, in this study, skarn formation is characterized by the lack of large chemical element influx from the granitoid protolith. A large decrease of the initial carbonate volume (up to -86%) resulted from a combination of decarbonation reactions and loss of CaO and CO(2). The resulting volume change has potentially important consequences for the interpretation of stable isotope profiles: the isotope alteration could have occured over greater distances than those observed today.

Mineral zoning and geochemistry of epithermal polymetallic Zn-Pb-Ag-Cu-Bi mineralization at Cerro de Pasco, Peru

The large Cerro de Pasco Cordilleran base metal deposit in central Peru is located on the eastern margin of a middle Miocene diatreme-dome complex and comprises two mineralization stages. The first stage consists of a large pyrite-quartz body replacing Lower Mesozoic Pucara carbonate rocks and, to a lesser extent, diatreme breccia. This body is composed of pyrite with pyrrhotite inclusions, quartz, and black and red chalcedony (containing hypogene hematite). At the contact with the pyrite-quartz body, the diatreme breccia is altered to pyrite-quartz-sericite-pyrite. This body was, in part, replaced by pipelike pyrrhotite bodies zoned outward to carbonate-replacement Zn-Pb ores hearing Fe-rich sphalerite (up to 24 mol % Fes). The second mineralization stage is partly superimposed on the first and consists of zoned east-west-trending Cu-Ag-(Au-Zn-Pb) enargite-pyrite veins hosted in the diatreme breccia in the western part of the deposit and well-zoned Zn-Pb-(Bi-Ag-Cu) carbonate-replacement orebodies; in both cases, sphalerite is Fe poor and the inner parts of the orebodies show typically advanced argillic alteration assemblages, including aluminum phosphate Sulfate (APS) minerals. The zoned enargite-pyrite veins display mineral zoning, from a core of enargite-pyrite +/- alunite with traces of Au, through an intermediate zone of tennantite, chalcopyrite, and Bi minerals to a poorly developed Outer zone hearing sphalerite-galena +/- kaolinite. The carbonate-hosted replacement ores are controlled along N 35 degrees E, N 90 degrees E, N 120 degrees E, and N 170 degrees E faults. They form well-zoned upward-flaring pipelike orebodies with a core of famatinite-pyrite and alunite, an intermediate zone with tetrahedrite-pyrite, chalcopyrite, matildite, cuprobismutite, emplectite, and other Bi minerals accompanied by APS minerals, kaolinite, and dickite, and an outer zone composed of Fe-poor sphalerite (in the range of 0.05-3.5 mol % Fes) and galena. The outermost zone consists of hematite, magnetite, and Fe-Mn-Zn-Ca-Mg carbonates. Most of the second-stage carbonate-replacement orebodies plunge between 25 degrees and 60 degrees to the west, suggesting that the hydrothermal fluids ascended from deeper levels and that no lateral feeding from the veins to the carbonate-replacement orebodies took place. In the Venencocha and Santa Rosa areas, located 2.5 km northwest of the Cerro de Pasco open pit and in the southern part of the deposit, respectively, advanced argillic altered dacitic domes and oxidized veins with advanced argillic alteration halos occur. The latter veins are possibly the oxidized equivalent of the second-stage enargite-pyrite veins located in the western part of the deposit. The alteration assemblage quartz-muscovite-pyrite associated with the pyrite-quartz body suggests that the first stage precipitated at slightly, acidic fin. The sulfide mineral assemblages define an evolutionary path close to the pyrite-pyrrhotite boundary and are characteristic of low-sulfidation states; they suggest that the oxidizing slightly acidic hydrothermal fluid was buffered by phyllite, shale, and carbonate host rock. However, the presence in the pyrite-quartz body of hematite within quartz suggests that, locally, the fluids were less buffered by the host rock. The mineral assemblages of the second mineralization stage are characteristic of high- to intermediate-sulfidation states. High-sulfidation states and oxidizing conditions were achieved and maintained in the cores of the second-stage orebodies, even in those replacing carbonate rocks. The observation that, in places, second-stage mineral assemblages are found in the inner and outer zones is explained in terms of the hydrothermal fluid advancing and waning. Microthermometric data from fluid inclusions in quartz indicate that the different ores of the first mineralization stage formed at similar temperatures and moderate salinities (200 degrees-275 degrees C and 0.2-6.8 wt % NaCl equiv in the pyrite-quartz body; 192 degrees-250 degrees C and 1.1-4.3 wt % NaCl equiv in the pyrrhotite bodies; and 183 degrees-212 degrees C and 3.2-4.0 wt % NaCl equiv in the Zn-Pb ores). These values are similar to those obtained for fluid inclusions in quartz and sphalerite from the second-stage ores (187 degrees-293 degrees C and 0.2-5.2 wt % NaCl equiv in the enargite-pyrite veins: 178 degrees-265 degrees C and 0.2-7.5 wt % NaCl equiv in quartz of carbonate-replacement orebodies; 168 degrees-999 degrees C and 3-11.8 wt % NaCl equiv in sphalerite of carbonate-replacement orebodies; and 245 degrees-261 degrees C and 3.2-7.7 wt % NaCl equiv in quartz from Venencocha). Oxygen and hydrogen isotope compositions oil kaolinite from carbonate-replacement orebodies (delta(18)O = 5.3-11.5%o, delta D = -82 to -114%o) and on alunite from the Venencocha and Santa Rosa areas (delta(18)O = 1.9-6.9%o, delta D = -56 to -73%o). Oxygen isotope compositions of quartz from the first and second stages have 6180 values from 9.1 to 1.7.8 per mil. Calculated fluids in equilibrium with kaolinite have delta(18)O values of 2.0 to 8.2 and delta D values of -69 to -97 per mil; values in equilibrium with alunite are -1.4 to -6.4 and -62 to -79 per mil. Sulfur isotope compositions of sulfides from both stages have a narrow range of delta(34)S values, between -3.7 and +4.2 per mil; values for sulfates from the second stage are between 4.2 and 31.2 per mil. These results define two mixing trends for the ore-forming fluids. The first trend reflects mixing between a moderately saline (similar to 10 wt % NaCl equiv) magmatic end member that had degassed (as indicated by the low delta D values) and meteoric water. The second mixing indicates condensation of magmatic vapor with HCl and SO(2) into meteoric water, which formed alunite. The hydrothermal system at Cerro de Pasco was emplaced at a shallow depth (similar to 500 m) in the epithermal and upper part of a porphyry environment. The similar temperatures and salinities obtained for the first stage and second stages, together with the stable isotope data, indicate that both stages are linked and represent successive stages of epithermal polymetallic mineralization in the upper part of a porphyry system.

High-pressure metamorphism in the Adula nappe - Guide to the excursion of the Swiss Society of Mineralogy and Petrology (September 29 - October 5, 1991)

1st day: Lithology and structure of the northern Adula nappe around Zervreila 2nd day: High-pressure rocks of the Suretta nappe, the middle Adula nappe and its Mesozoic cover - Eclogite near Innerferrara, Suretta nappe - Crossite-bearing prasinite from schistes lustres near Nufenen - Eclogites south of Hinterrhein, Adula nappe - Blueschists and eclogites from Neu-Wahli, Misox zone 3 days: Eclogite boudin and associated whiteschists in the uppermost Calanca valley, middle Adula nappe 4th day: Eclogites, associated metapelites and granitoid gneisses of Trescolmen, middle Adula nappe 5th day: The ultramafic-mafic suite of the Cima Lunga nappe around Cima di Gagnone 6th day: Garnet peridotites and eclogites from Alpe Arami, Cima Lunga nappe