Study design for technology assessment: critical issues.

The epidemiological methods have become useful tools for the assessment of the effectiveness and safety of health care technologies. The experimental methods, namely the randomized controlled trials (RCT), give the best evidence of the effect of a technology. However, the ethical issues and the very nature of the intervention under study sometimes make it difficult to carry out an RCT. Therefore, quasi-experimental and non-experimental study designs are also applied. The critical issues concerning these designs are discussed. The results of evaluative studies are of importance for decision-makers in health policy. The measurements of the impact of a medical technology should go beyond a statement of its effectiveness, because the essential outcome of an intervention or programme is the health status and quality of life of the individuals and populations concerned.

On the use of IRMS in forensic science: proposals for a methodological approach.

The flourishing number of publications on the use of isotope ratio mass spectrometry (IRMS) in forensicscience denotes the enthusiasm and the attraction generated by this technology. IRMS has demonstratedits potential to distinguish chemically identical compounds coming from different sources. Despite thenumerous applications of IRMS to a wide range of forensic materials, its implementation in a forensicframework is less straightforward than it appears. In addition, each laboratory has developed its ownstrategy of analysis on calibration, sequence design, standards utilisation and data treatment without aclear consensus.Through the experience acquired from research undertaken in different forensic fields, we propose amethodological framework of the whole process using IRMS methods. We emphasize the importance ofconsidering isotopic results as part of a whole approach, when applying this technology to a particularforensic issue. The process is divided into six different steps, which should be considered for a thoughtfuland relevant application. The dissection of this process into fundamental steps, further detailed, enablesa better understanding of the essential, though not exhaustive, factors that have to be considered in orderto obtain results of quality and sufficiently robust to proceed to retrospective analyses or interlaboratorycomparisons.

On the use of IRMS in forensic science: proposals for a methodological approach

The flourishing number of publications on the use of isotope ratio mass spectrometry (IRMS) in forensic science denotes the enthusiasm and the attraction generated by this technology. IRMS has demonstrated its potential to distinguish chemically identical compounds coming from different sources. Despite the numerous applications of IRMS to a wide range of forensic materials, its implementation in a forensic framework is less straightforward than it appears. In addition, each laboratory has developed its own strategy of analysis on calibration, sequence design, standards utilisation and data treatment without a clear consensus.Through the experience acquired from research undertaken in different forensic fields, we propose a methodological framework of the whole process using IRMS methods. We emphasize the importance of considering isotopic results as part of a whole approach, when applying this technology to a particular forensic issue. The process is divided into six different steps, which should be considered for a thoughtful and relevant application. The dissection of this process into fundamental steps, further detailed, enables a better understanding of the essential, though not exhaustive, factors that have to be considered in order to obtain results of quality and sufficiently robust to proceed to retrospective analyses or interlaboratory comparisons.

La pratique basée sur les résultats probants. Partie 2: Les étapes du processus [Evidence-based practice: Part 2: Steps in the process].

Evidence-based (EBP) aims for a new distribution of power centered on scientific evidence rather than clinical expertise. The present article describes the operational process of EBP by describing the implementation stages of this type of practise. This stage presentation is essential given that there are many conceptions end models of EBP and that some nurses have a limited knowledge of its rules ans implications. Given that number and formulation of the stages varies by author, the process presented here attempts to integrate the different stages reviewed.

On the use of IRMS in forensic science: proposals for a methodological approach

The flourishing number of publications on the use of isotope ratio mass spectrometry (IRMS) in forensicscience denotes the enthusiasm and the attraction generated by this technology. IRMS has demonstratedits potential to distinguish chemically identical compounds coming from different sources. Despite thenumerous applications of IRMS to a wide range of forensic materials, its implementation in a forensicframework is less straightforward than it appears. In addition, each laboratory has developed its ownstrategy of analysis on calibration, sequence design, standards utilisation and data treatment without aclear consensus.Through the experience acquired from research undertaken in different forensic fields, we propose amethodological framework of the whole process using IRMS methods. We emphasize the importance ofconsidering isotopic results as part of a whole approach, when applying this technology to a particularforensic issue. The process is divided into six different steps, which should be considered for a thoughtfuland relevant application. The dissection of this process into fundamental steps, further detailed, enablesa better understanding of the essential, though not exhaustive, factors that have to be considered in orderto obtain results of quality and sufficiently robust to proceed to retrospective analyses or interlaboratorycomparisons.

Quelques abus de la statistique dans la recherche médicale [Various abuses of statistics in medical research].

Statistics has become an indispensable tool in biomedical research. Thanks, in particular, to computer science, the researcher has easy access to elementary "classical" procedures. These are often of a "confirmatory" nature: their aim is to test hypotheses (for example the efficacy of a treatment) prior to experimentation. However, doctors often use them in situations more complex than foreseen, to discover interesting data structures and formulate hypotheses. This inverse process may lead to misuse which increases the number of "statistically proven" results in medical publications. The help of a professional statistician thus becomes necessary. Moreover, good, simple "exploratory" techniques are now available. In addition, medical data contain quite a high percentage of outliers (data that deviate from the majority). With classical methods it is often very difficult (even for a statistician!) to detect them and the reliability of results becomes questionable. New, reliable ("robust") procedures have been the subject of research for the past two decades. Their practical introduction is one of the activities of the Statistics and Data Processing Department of the University of Social and Preventive Medicine, Lausanne.

Caution on the storage of waters and aqueous solutions in plastic containers for hydrogen and oxygen stable isotope analysis

RATIONALE The choice of containers for storage of aqueous samples between their collection, transport and water hydrogen (2H) and oxygen (18O) stable isotope analysis is a topic of concern for a wide range of fields in environmental, geological, biomedical, food, and forensic sciences. The transport and separation of water molecules during water vapor or liquid uptake by sorption or solution and the diffusive transport of water molecules through organic polymer material by permeation or pervaporation may entail an isotopic fractionation. An experiment was conducted to evaluate the extent of such fractionation. METHODS Sixteen bottle-like containers of eleven different organic polymers, including low and high density polyethylene (LDPE and HDPE), polypropylene (PP), polycarbonate (PC), polyethylene terephthalate (PET), and perfluoroalkoxy-Teflon (PFA), of different wall thickness and size were completely filled with the same mineral water and stored for 659?days under the same conditions of temperature and humidity. Particular care was exercised to keep the bottles tightly closed and prevent loss of water vapor through the seals. RESULTS Changes of up to +5 parts per thousand for d2H values and +2.0 parts per thousand for d18O values were measured for water after more than 1?year of storage within a plastic container, with the magnitude of change depending mainly on the type of organic polymer, wall thickness, and container size. The most important variations were measured for the PET and PC bottles. Waters stored in glass bottles with Polyseal (TM) cone-lined PP screw caps and thick-walled HDPE or PFA containers with linerless screw caps having an integrally molded inner sealing ring preserved their original d2H and d18O values. The carbon, hydrogen, and oxygen stable isotope compositions of the organic polymeric materials were also determined. CONCLUSIONS The results of this study clearly show that for precise and accurate measurements of the water stable isotope composition in aqueous solutions, rigorous sampling and storage procedures are needed both for laboratory standards and for unknown samples. Copyright (c) 2012 John Wiley & Sons, Ltd.

Test result-based sampling: an efficient design for estimating the accuracy of patient safety indicators.

OBJECTIVE: Accuracy studies of Patient Safety Indicators (PSIs) are critical but limited by the large samples required due to low occurrence of most events. We tested a sampling design based on test results (verification-biased sampling [VBS]) that minimizes the number of subjects to be verified. METHODS: We considered 3 real PSIs, whose rates were calculated using 3 years of discharge data from a university hospital and a hypothetical screen of very rare events. Sample size estimates, based on the expected sensitivity and precision, were compared across 4 study designs: random and VBS, with and without constraints on the size of the population to be screened. RESULTS: Over sensitivities ranging from 0.3 to 0.7 and PSI prevalence levels ranging from 0.02 to 0.2, the optimal VBS strategy makes it possible to reduce sample size by up to 60% in comparison with simple random sampling. For PSI prevalence levels below 1%, the minimal sample size required was still over 5000. CONCLUSIONS: Verification-biased sampling permits substantial savings in the required sample size for PSI validation studies. However, sample sizes still need to be very large for many of the rarer PSIs.

Rational design of an organometallic glutathione transferase inhibitor.

Double trouble: A hybrid organic-inorganic (organometallic) inhibitor was designed to target glutathione transferases. The metal center is used to direct protein binding, while the organic moiety acts as the active-site inhibitor (see picture). The mechanism of inhibition was studied using a range of biophysical and biochemical methods.

Harmonization guidelines for HLA-peptide multimer assays derived from results of a large scale international proficiency panel of the Cancer Vaccine Consortium.

PURPOSE: The Cancer Vaccine Consortium of the Cancer Research Institute (CVC-CRI) conducted a multicenter HLA-peptide multimer proficiency panel (MPP) with a group of 27 laboratories to assess the performance of the assay. EXPERIMENTAL DESIGN: Participants used commercially available HLA-peptide multimers and a well characterized common source of peripheral blood mononuclear cells (PBMC). The frequency of CD8+ T cells specific for two HLA-A2-restricted model antigens was measured by flow cytometry. The panel design allowed for participants to use their preferred staining reagents and locally established protocols for both cell labeling, data acquisition and analysis. RESULTS: We observed significant differences in both the performance characteristics of the assay and the reported frequencies of specific T cells across laboratories. These results emphasize the need to identify the critical variables important for the observed variability to allow for harmonization of the technique across institutions. CONCLUSIONS: Three key recommendations emerged that would likely reduce assay variability and thus move toward harmonizing of this assay. (1) Use of more than two colors for the staining (2) collect at least 100,000 CD8 T cells, and (3) use of a background control sample to appropriately set the analytical gates. We also provide more insight into the limitations of the assay and identified additional protocol steps that potentially impact the quality of data generated and therefore should serve as primary targets for systematic analysis in future panels. Finally, we propose initial guidelines for harmonizing assay performance which include the introduction of standard operating protocols to allow for adequate training of technical staff and auditing of test analysis procedures.

Using active learning for monitoring networks design: The example of wind power plants sites evaluation

Locating new wind farms is of crucial importance for energy policies of the next decade. To select the new location, an accurate picture of the wind fields is necessary. However, characterizing wind fields is a difficult task, since the phenomenon is highly nonlinear and related to complex topographical features. In this paper, we propose both a nonparametric model to estimate wind speed at different time instants and a procedure to discover underrepresented topographic conditions, where new measuring stations could be added. Compared to space filling techniques, this last approach privileges optimization of the output space, thus locating new potential measuring sites through the uncertainty of the model itself.

The use of mannan antigen and anti-mannan antibodies in the diagnosis of invasive candidiasis: recommendations from the Third European Conference on Infections in Leukemia.

INTRODUCTION: Timely diagnosis of invasive candidiasis (IC) remains difficult as the clinical presentation is not specific and blood cultures lack sensitivity and need a long incubation time. Thus, non-culture-based methods for diagnosing IC have been developed. Mannan antigen (Mn) and anti-mannan antibodies (A-Mn) are present in patients with IC. On behalf of the Third European Conference on Infections in Leukemia, the performance of these tests was analysed and reviewed. METHODS: The literature was searched for studies using the commercially available sandwich enzyme-linked immunosorbent assays (Platelia™, Bio-Rad Laboratories, Marnes-la-Coquette, France) for detecting Mn and A-Mn in serum. The target condition of this review was IC defined according to 2008 European Organization for Research and Treatment of Cancer/Mycoses Study Group criteria. Sensitivity, specificity and diagnostic odds ratios (DOR) were calculated for Mn, A-Mn and combined Mn/A-Mn testing. RESULTS: Overall, 14 studies that comprised 453 patients and 767 controls were reviewed. The patient populations included in the studies were mainly haematological and cancer cases in seven studies and mainly intensive care unit and surgery cases in the other seven studies. All studies but one were retrospective in design. Mn sensitivity was 58% (95% confidence interval [CI], 53-62); specificity, 93% (95% CI, 91-94) and DOR, 18 (95% CI 12-28). A-Mn sensitivity was 59% (95% CI, 54-65); specificity, 83% (95% CI, 79-97) and DOR, 12 (95% CI 7-21). Combined Mn/A-Mn sensitivity was 83% (95% CI, 79-87); specificity, 86% (95% CI, 82-90) and DOR, 58 (95% CI 27-122). Significant heterogeneity of the studies was detected. The sensitivity of both Mn and A-Mn varied for different Candida species, and it was the highest for C. albicans, followed by C. glabrata and C. tropicalis. In 73% of 45 patients with candidemia, at least one of the serological tests was positive before the culture results, with mean time advantage being 6 days for Mn and 7 days for A-Mn. In 21 patients with hepatosplenic IC, 18 (86%) had Mn or A-Mn positive test results at a median of 16 days before radiological detection of liver or spleen lesions. CONCLUSIONS: Mn and A-Mn are useful for diagnosis of IC. The performance of combined Mn/A-Mn testing is superior to either Mn or A-Mn testing.